ETHER: Add tests for crc and bpf filter construction logic
This commit is contained in:
Mark Pizzolato
parent
75d18d4db0
commit
a1ecce16bf
1 changed files with 285 additions and 84 deletions
369
sim_ether.c
369
sim_ether.c
|
|
@ -3646,6 +3646,98 @@ if (status < 0) {
|
|||
return status;
|
||||
}
|
||||
|
||||
t_stat eth_bpf_filter (ETH_DEV* dev, int addr_count, ETH_MAC* const filter_address,
|
||||
ETH_BOOL all_multicast, ETH_BOOL promiscuous,
|
||||
int reflections,
|
||||
ETH_MAC* physical_addr,
|
||||
ETH_MAC* host_nic_phy_hw_addr,
|
||||
ETH_MULTIHASH* const hash,
|
||||
char *buf)
|
||||
{
|
||||
int i;
|
||||
char mac[20];
|
||||
char *buf2;
|
||||
|
||||
/* setup BPF filters and other fields to minimize packet delivery */
|
||||
strcpy(buf, "");
|
||||
|
||||
/* construct destination filters - since the real ethernet interface was set
|
||||
into promiscuous mode by eth_open(), we need to filter out the packets that
|
||||
our simulated interface doesn't want. */
|
||||
if (!promiscuous) {
|
||||
for (i = 0; i < addr_count; i++) {
|
||||
eth_mac_fmt(&filter_address[i], mac);
|
||||
if (!strstr(buf, mac)) /* eliminate duplicates */
|
||||
sprintf(&buf[strlen(buf)], "%s(ether dst %s)", (*buf) ? " or " : "((", mac);
|
||||
}
|
||||
if (all_multicast || hash)
|
||||
sprintf(&buf[strlen(buf)], "%s(ether multicast)", (*buf) ? " or " : "((");
|
||||
if (strlen(buf) > 0)
|
||||
sprintf(&buf[strlen(buf)], ")");
|
||||
}
|
||||
|
||||
/* construct source filters - this prevents packets from being reflected back
|
||||
by systems where WinPcap and libpcap cause packet reflections. Note that
|
||||
some systems do not reflect packets at all. This *assumes* that the
|
||||
simulated NIC will not send out packets with multicast source fields. */
|
||||
if ((addr_count > 0) && (reflections > 0)) {
|
||||
if (strlen(buf) > 0)
|
||||
sprintf(&buf[strlen(buf)], " and ");
|
||||
else
|
||||
if (promiscuous)
|
||||
sprintf(&buf[strlen(buf)], "(");
|
||||
sprintf (&buf[strlen(buf)], "not (");
|
||||
buf2 = &buf[strlen(buf)];
|
||||
for (i = 0; i < addr_count; i++) {
|
||||
if (filter_address[i][0] & 0x01) continue; /* skip multicast addresses */
|
||||
eth_mac_fmt(&filter_address[i], mac);
|
||||
if (!strstr(buf2, mac)) /* only process each address once */
|
||||
sprintf(&buf2[strlen(buf2)], "%s(ether src %s)", (*buf2) ? " or " : "", mac);
|
||||
}
|
||||
sprintf (&buf[strlen(buf)], ")");
|
||||
if (1 == strlen(buf2)) { /* all addresses were multicast? */
|
||||
buf[strlen(buf)-6] = '\0'; /* Remove "not ()" */
|
||||
if (strlen(buf) > 0)
|
||||
buf[strlen(buf)-5] = '\0'; /* remove " and " */
|
||||
}
|
||||
}
|
||||
if (strlen(buf) > 0)
|
||||
sprintf(&buf[strlen(buf)], ")");
|
||||
/* When changing the Physical Address on a LAN interface, VMS sends out a
|
||||
loopback packet with the source and destination addresses set to the same
|
||||
value as the Physical Address which is being setup. This packet is
|
||||
designed to find and help diagnose MAC address conflicts (which also
|
||||
include DECnet address conflicts). Normally, this packet would not be
|
||||
seen by the sender, only by the other machine that has the same Physical
|
||||
Address (or possibly DECnet address). If the ethernet subsystem is
|
||||
reflecting packets, the network startup will fail to start if it sees the
|
||||
reflected packet, since it thinks another system is using this Physical
|
||||
Address (or DECnet address). We have to let these packets through, so
|
||||
that if another machine has the same Physical Address (or DECnet address)
|
||||
that we can detect it. Both eth_write() and _eth_callback() help by
|
||||
checking the reflection count - eth_write() adds the reflection count to
|
||||
dev->loopback_self_sent, and _eth_callback() check the value - if the
|
||||
dev->loopback_self_sent count is zero, then the packet has come from
|
||||
another machine with the same address, and needs to be passed on to the
|
||||
simulated machine. */
|
||||
/* check for physical address in filters */
|
||||
if ((!promiscuous) && (addr_count) && (reflections > 0)) {
|
||||
eth_mac_fmt(&physical_addr[0], mac);
|
||||
if (strcmp(mac, "00:00:00:00:00:00") != 0) {
|
||||
/* let packets through where dst and src are the same as our physical address */
|
||||
sprintf (&buf[strlen(buf)], " or ((ether dst %s) and (ether src %s))", mac, mac);
|
||||
if (host_nic_phy_hw_addr) {
|
||||
eth_mac_fmt(&host_nic_phy_hw_addr[0], mac);
|
||||
sprintf(&buf[strlen(buf)], " or ((ether dst %s) and (ether proto 0x9000))", mac);
|
||||
}
|
||||
}
|
||||
}
|
||||
if ((0 == strlen(buf)) && (!promiscuous)) /* Empty filter means match nothing */
|
||||
strcpy(buf, "ether host fe:ff:ff:ff:ff:ff"); /* this should be a good match nothing filter */
|
||||
sim_debug(dev->dbit, dev->dptr, "BPF string is: |%s|\n", buf);
|
||||
return SCPE_OK;
|
||||
}
|
||||
|
||||
t_stat eth_filter(ETH_DEV* dev, int addr_count, ETH_MAC* const addresses,
|
||||
ETH_BOOL all_multicast, ETH_BOOL promiscuous)
|
||||
{
|
||||
|
|
@ -3661,7 +3753,6 @@ t_stat eth_filter_hash(ETH_DEV* dev, int addr_count, ETH_MAC* const addresses,
|
|||
int i;
|
||||
char buf[116+66*ETH_FILTER_MAX];
|
||||
char mac[20];
|
||||
char* buf2;
|
||||
t_stat status;
|
||||
#ifdef USE_BPF
|
||||
struct bpf_program bpf;
|
||||
|
|
@ -3714,92 +3805,26 @@ if (dev->dptr->dctrl & dev->dbit) {
|
|||
sim_debug(dev->dbit, dev->dptr, "Promiscuous\n");
|
||||
}
|
||||
}
|
||||
|
||||
/* setup BPF filters and other fields to minimize packet delivery */
|
||||
strcpy(buf, "");
|
||||
|
||||
/* construct destination filters - since the real ethernet interface was set
|
||||
into promiscuous mode by eth_open(), we need to filter out the packets that
|
||||
our simulated interface doesn't want. */
|
||||
if (!dev->promiscuous) {
|
||||
for (i = 0; i < addr_count; i++) {
|
||||
eth_mac_fmt(&dev->filter_address[i], mac);
|
||||
if (!strstr(buf, mac)) /* eliminate duplicates */
|
||||
sprintf(&buf[strlen(buf)], "%s(ether dst %s)", (*buf) ? " or " : "((", mac);
|
||||
}
|
||||
if (dev->all_multicast || dev->hash_filter)
|
||||
sprintf(&buf[strlen(buf)], "%s(ether multicast)", (*buf) ? " or " : "((");
|
||||
if (strlen(buf) > 0)
|
||||
sprintf(&buf[strlen(buf)], ")");
|
||||
}
|
||||
|
||||
/* construct source filters - this prevents packets from being reflected back
|
||||
by systems where WinPcap and libpcap cause packet reflections. Note that
|
||||
some systems do not reflect packets at all. This *assumes* that the
|
||||
simulated NIC will not send out packets with multicast source fields. */
|
||||
if ((addr_count > 0) && (dev->reflections > 0)) {
|
||||
if (strlen(buf) > 0)
|
||||
sprintf(&buf[strlen(buf)], " and ");
|
||||
else
|
||||
if (dev->promiscuous)
|
||||
sprintf(&buf[strlen(buf)], "(");
|
||||
sprintf (&buf[strlen(buf)], "not (");
|
||||
buf2 = &buf[strlen(buf)];
|
||||
for (i = 0; i < addr_count; i++) {
|
||||
if (dev->filter_address[i][0] & 0x01) continue; /* skip multicast addresses */
|
||||
eth_mac_fmt(&dev->filter_address[i], mac);
|
||||
if (!strstr(buf2, mac)) /* only process each address once */
|
||||
sprintf(&buf2[strlen(buf2)], "%s(ether src %s)", (*buf2) ? " or " : "", mac);
|
||||
}
|
||||
sprintf (&buf[strlen(buf)], ")");
|
||||
if (1 == strlen(buf2)) { /* all addresses were multicast? */
|
||||
buf[strlen(buf)-6] = '\0'; /* Remove "not ()" */
|
||||
if (strlen(buf) > 0)
|
||||
buf[strlen(buf)-5] = '\0'; /* remove " and " */
|
||||
}
|
||||
}
|
||||
if (strlen(buf) > 0)
|
||||
sprintf(&buf[strlen(buf)], ")");
|
||||
/* When changing the Physical Address on a LAN interface, VMS sends out a
|
||||
loopback packet with the source and destination addresses set to the same
|
||||
value as the Physical Address which is being setup. This packet is
|
||||
designed to find and help diagnose MAC address conflicts (which also
|
||||
include DECnet address conflicts). Normally, this packet would not be
|
||||
seen by the sender, only by the other machine that has the same Physical
|
||||
Address (or possibly DECnet address). If the ethernet subsystem is
|
||||
reflecting packets, the network startup will fail to start if it sees the
|
||||
reflected packet, since it thinks another system is using this Physical
|
||||
Address (or DECnet address). We have to let these packets through, so
|
||||
that if another machine has the same Physical Address (or DECnet address)
|
||||
that we can detect it. Both eth_write() and _eth_callback() help by
|
||||
checking the reflection count - eth_write() adds the reflection count to
|
||||
dev->loopback_self_sent, and _eth_callback() check the value - if the
|
||||
dev->loopback_self_sent count is zero, then the packet has come from
|
||||
another machine with the same address, and needs to be passed on to the
|
||||
simulated machine. */
|
||||
/* Set the desired physical address */
|
||||
memset(dev->physical_addr, 0, sizeof(ETH_MAC));
|
||||
dev->loopback_self_sent = 0;
|
||||
/* check for physical address in filters */
|
||||
if ((!dev->promiscuous) && (addr_count) && (dev->reflections > 0)) {
|
||||
for (i = 0; i < addr_count; i++) {
|
||||
if (dev->filter_address[i][0]&1)
|
||||
continue; /* skip all multicast addresses */
|
||||
eth_mac_fmt(&dev->filter_address[i], mac);
|
||||
if (strcmp(mac, "00:00:00:00:00:00") != 0) {
|
||||
memcpy(dev->physical_addr, &dev->filter_address[i], sizeof(ETH_MAC));
|
||||
/* let packets through where dst and src are the same as our physical address */
|
||||
sprintf (&buf[strlen(buf)], " or ((ether dst %s) and (ether src %s))", mac, mac);
|
||||
if (dev->have_host_nic_phy_addr) {
|
||||
eth_mac_fmt(&dev->host_nic_phy_hw_addr, mac);
|
||||
sprintf(&buf[strlen(buf)], " or ((ether dst %s) and (ether proto 0x9000))", mac);
|
||||
}
|
||||
break;
|
||||
}
|
||||
/* Find desired physical address in filters */
|
||||
for (i = 0; i < addr_count; i++) {
|
||||
if (dev->filter_address[i][0]&1)
|
||||
continue; /* skip all multicast addresses */
|
||||
eth_mac_fmt(&dev->filter_address[i], mac);
|
||||
if (strcmp(mac, "00:00:00:00:00:00") != 0) {
|
||||
memcpy(dev->physical_addr, &dev->filter_address[i], sizeof(ETH_MAC));
|
||||
break;
|
||||
}
|
||||
}
|
||||
if ((0 == strlen(buf)) && (!dev->promiscuous)) /* Empty filter means match nothing */
|
||||
strcpy(buf, "ether host fe:ff:ff:ff:ff:ff"); /* this should be a good match nothing filter */
|
||||
sim_debug(dev->dbit, dev->dptr, "BPF string is: |%s|\n", buf);
|
||||
|
||||
/* setup BPF filters and other fields to minimize packet delivery */
|
||||
eth_bpf_filter (dev, dev->addr_count, dev->filter_address,
|
||||
dev->all_multicast, dev->promiscuous,
|
||||
dev->reflections, &dev->physical_addr,
|
||||
dev->have_host_nic_phy_addr ? &dev->host_nic_phy_hw_addr: NULL,
|
||||
&dev->hash, buf);
|
||||
|
||||
/* get netmask, which is a required argument for compiling. The value,
|
||||
in our case isn't actually interesting since the filters we generate
|
||||
|
|
@ -4086,8 +4111,184 @@ if (dev->eth_api == ETH_API_NAT)
|
|||
#endif
|
||||
}
|
||||
|
||||
static
|
||||
t_stat eth_test_crc32 (DEVICE *dptr)
|
||||
{
|
||||
int errors = 0;
|
||||
int val;
|
||||
uint8 data[12];
|
||||
static uint32 valcrc32[] = {
|
||||
0x7BD5C66F, 0x92C4D707, 0x7286E2FE, 0x9B97F396, 0x69738F4D, 0x80629E25, 0x6020ABDC, 0x8931BAB4,
|
||||
0x5E99542B, 0xB7884543, 0x57CA70BA, 0xBEDB61D2, 0x4C3F1D09, 0xA52E0C61, 0x456C3998, 0xAC7D28F0,
|
||||
0x314CE2E7, 0xD85DF38F, 0x381FC676, 0xD10ED71E, 0x23EAABC5, 0xCAFBBAAD, 0x2AB98F54, 0xC3A89E3C,
|
||||
0x140070A3, 0xFD1161CB, 0x1D535432, 0xF442455A, 0x06A63981, 0xEFB728E9, 0x0FF51D10, 0xE6E40C78,
|
||||
0xEEE78F7F, 0x07F69E17, 0xE7B4ABEE, 0x0EA5BA86, 0xFC41C65D, 0x1550D735, 0xF512E2CC, 0x1C03F3A4,
|
||||
0xCBAB1D3B, 0x22BA0C53, 0xC2F839AA, 0x2BE928C2, 0xD90D5419, 0x301C4571, 0xD05E7088, 0x394F61E0,
|
||||
0xA47EABF7, 0x4D6FBA9F, 0xAD2D8F66, 0x443C9E0E, 0xB6D8E2D5, 0x5FC9F3BD, 0xBF8BC644, 0x569AD72C,
|
||||
0x813239B3, 0x682328DB, 0x88611D22, 0x61700C4A, 0x93947091, 0x7A8561F9, 0x9AC75400, 0x73D64568,
|
||||
0x8AC0520E, 0x63D14366, 0x8393769F, 0x6A8267F7, 0x98661B2C, 0x71770A44, 0x91353FBD, 0x78242ED5,
|
||||
0xAF8CC04A, 0x469DD122, 0xA6DFE4DB, 0x4FCEF5B3, 0xBD2A8968, 0x543B9800, 0xB479ADF9, 0x5D68BC91,
|
||||
0xC0597686, 0x294867EE, 0xC90A5217, 0x201B437F, 0xD2FF3FA4, 0x3BEE2ECC, 0xDBAC1B35, 0x32BD0A5D,
|
||||
0xE515E4C2, 0x0C04F5AA, 0xEC46C053, 0x0557D13B, 0xF7B3ADE0, 0x1EA2BC88, 0xFEE08971, 0x17F19819,
|
||||
0x1FF21B1E, 0xF6E30A76, 0x16A13F8F, 0xFFB02EE7, 0x0D54523C, 0xE4454354, 0x040776AD, 0xED1667C5,
|
||||
0x3ABE895A, 0xD3AF9832, 0x33EDADCB, 0xDAFCBCA3, 0x2818C078, 0xC109D110, 0x214BE4E9, 0xC85AF581,
|
||||
0x556B3F96, 0xBC7A2EFE, 0x5C381B07, 0xB5290A6F, 0x47CD76B4, 0xAEDC67DC, 0x4E9E5225, 0xA78F434D,
|
||||
0x7027ADD2, 0x9936BCBA, 0x79748943, 0x9065982B, 0x6281E4F0, 0x8B90F598, 0x6BD2C061, 0x82C3D109,
|
||||
0x428FE8EC, 0xAB9EF984, 0x4BDCCC7D, 0xA2CDDD15, 0x5029A1CE, 0xB938B0A6, 0x597A855F, 0xB06B9437,
|
||||
0x67C37AA8, 0x8ED26BC0, 0x6E905E39, 0x87814F51, 0x7565338A, 0x9C7422E2, 0x7C36171B, 0x95270673,
|
||||
0x0816CC64, 0xE107DD0C, 0x0145E8F5, 0xE854F99D, 0x1AB08546, 0xF3A1942E, 0x13E3A1D7, 0xFAF2B0BF,
|
||||
0x2D5A5E20, 0xC44B4F48, 0x24097AB1, 0xCD186BD9, 0x3FFC1702, 0xD6ED066A, 0x36AF3393, 0xDFBE22FB,
|
||||
0xD7BDA1FC, 0x3EACB094, 0xDEEE856D, 0x37FF9405, 0xC51BE8DE, 0x2C0AF9B6, 0xCC48CC4F, 0x2559DD27,
|
||||
0xF2F133B8, 0x1BE022D0, 0xFBA21729, 0x12B30641, 0xE0577A9A, 0x09466BF2, 0xE9045E0B, 0x00154F63,
|
||||
0x9D248574, 0x7435941C, 0x9477A1E5, 0x7D66B08D, 0x8F82CC56, 0x6693DD3E, 0x86D1E8C7, 0x6FC0F9AF,
|
||||
0xB8681730, 0x51790658, 0xB13B33A1, 0x582A22C9, 0xAACE5E12, 0x43DF4F7A, 0xA39D7A83, 0x4A8C6BEB,
|
||||
0xB39A7C8D, 0x5A8B6DE5, 0xBAC9581C, 0x53D84974, 0xA13C35AF, 0x482D24C7, 0xA86F113E, 0x417E0056,
|
||||
0x96D6EEC9, 0x7FC7FFA1, 0x9F85CA58, 0x7694DB30, 0x8470A7EB, 0x6D61B683, 0x8D23837A, 0x64329212,
|
||||
0xF9035805, 0x1012496D, 0xF0507C94, 0x19416DFC, 0xEBA51127, 0x02B4004F, 0xE2F635B6, 0x0BE724DE,
|
||||
0xDC4FCA41, 0x355EDB29, 0xD51CEED0, 0x3C0DFFB8, 0xCEE98363, 0x27F8920B, 0xC7BAA7F2, 0x2EABB69A,
|
||||
0x26A8359D, 0xCFB924F5, 0x2FFB110C, 0xC6EA0064, 0x340E7CBF, 0xDD1F6DD7, 0x3D5D582E, 0xD44C4946,
|
||||
0x03E4A7D9, 0xEAF5B6B1, 0x0AB78348, 0xE3A69220, 0x1142EEFB, 0xF853FF93, 0x1811CA6A, 0xF100DB02,
|
||||
0x6C311115, 0x8520007D, 0x65623584, 0x8C7324EC, 0x7E975837, 0x9786495F, 0x77C47CA6, 0x9ED56DCE,
|
||||
0x497D8351, 0xA06C9239, 0x402EA7C0, 0xA93FB6A8, 0x5BDBCA73, 0xB2CADB1B, 0x5288EEE2, 0xBB99FF8A};
|
||||
|
||||
for (val=0; val <= 0xFF; val++) {
|
||||
memset (data, val, sizeof (data));
|
||||
if (valcrc32[val] != eth_crc32 (0, data, sizeof (data))) {
|
||||
printf("Unexpected CRC for %d byte buffer containing 0x%02X. Expected %08X, got %08X\n",
|
||||
(int)sizeof (data), val, valcrc32[val], eth_crc32 (0, data, sizeof (data)));
|
||||
++errors;
|
||||
}
|
||||
}
|
||||
return (errors == 0) ? SCPE_OK : SCPE_IERR;
|
||||
}
|
||||
|
||||
static
|
||||
t_stat eth_test_bpf (DEVICE *dptr)
|
||||
{
|
||||
int errors = 0;
|
||||
#ifdef USE_BPF
|
||||
t_stat r;
|
||||
DEVICE eth_tst;
|
||||
ETH_DEV dev;
|
||||
int reflections, all_multicast, promiscuous;
|
||||
char buf[116+66*ETH_FILTER_MAX];
|
||||
char mac[20];
|
||||
ETH_MAC filter_address[3] = {
|
||||
{0x04, 0x05, 0x06, 0x07, 0x08, 0x09},
|
||||
{0x09, 0x00, 0x2B, 0x02, 0x01, 0x07},
|
||||
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
|
||||
};
|
||||
int addr_count;
|
||||
ETH_MAC physical_addr = {0x04, 0x05, 0x06, 0x07, 0x08, 0x09};
|
||||
ETH_MAC host_nic_phy_hw_addr = {0x02, 0x03, 0x04, 0x05, 0x06, 0x07};
|
||||
ETH_MAC *host_phy_addr_list[2] = {&host_nic_phy_hw_addr, NULL};
|
||||
int host_phy_addr_listindex;
|
||||
ETH_MULTIHASH hash = {0x01, 0x40, 0x00, 0x00, 0x48, 0x88, 0x40, 0x00};
|
||||
ETH_MULTIHASH *hash_list[2] = {&hash, NULL};
|
||||
int hash_listindex;
|
||||
int bpf_count = 0;
|
||||
int bpf_construct_error_count = 0;
|
||||
int bpf_compile_error_count = 0;
|
||||
int bpf_compile_skip_count = 0;
|
||||
#define SIM_PRINT_BPF_ARGUMENTS \
|
||||
if (1) { \
|
||||
sim_printf ("Eth: Input to BPF string construction:\n"); \
|
||||
sim_printf ("Eth: Reflections: %d\n", reflections); \
|
||||
sim_printf ("Eth: Filter Set:\n"); \
|
||||
for (i = 0; i < addr_count; i++) { \
|
||||
eth_mac_fmt(&filter_address[i], mac); \
|
||||
sim_printf ("Eth: Addr[%d]: %s\n", i, mac); \
|
||||
} \
|
||||
if (all_multicast) \
|
||||
sim_printf ("Eth: All Multicast\n"); \
|
||||
if (promiscuous) \
|
||||
sim_printf ("Eth: Promiscuous\n"); \
|
||||
if (hash_list[hash_listindex]) \
|
||||
sim_printf ("Eth: Multicast Hash: %02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X\n",\
|
||||
(*hash_list[hash_listindex])[0], (*hash_list[hash_listindex])[1], (*hash_list[hash_listindex])[2], (*hash_list[hash_listindex])[3], \
|
||||
(*hash_list[hash_listindex])[4], (*hash_list[hash_listindex])[5], (*hash_list[hash_listindex])[6], (*hash_list[hash_listindex])[7]);\
|
||||
if (host_phy_addr_list[host_phy_addr_listindex]) { \
|
||||
eth_mac_fmt(host_phy_addr_list[host_phy_addr_listindex], mac);\
|
||||
sim_printf ("Eth: host_nic_phy_hw_addr: %s\n", mac); \
|
||||
} \
|
||||
}
|
||||
|
||||
|
||||
memset (ð_tst, 0, sizeof(eth_tst));
|
||||
eth_open(&dev, "eth0", ð_tst, 1);
|
||||
for (reflections=0; reflections<=1; reflections++) {
|
||||
for (all_multicast=0; all_multicast<=1; all_multicast++) {
|
||||
for (promiscuous=0; promiscuous<=1; promiscuous++) {
|
||||
for (addr_count=1; addr_count<=2; addr_count++) {
|
||||
for (hash_listindex=0; hash_listindex<=1; hash_listindex++) {
|
||||
for (host_phy_addr_listindex=0; host_phy_addr_listindex<=1; host_phy_addr_listindex++) {
|
||||
int i;
|
||||
char errbuf[PCAP_ERRBUF_SIZE];
|
||||
|
||||
++bpf_count;
|
||||
r = eth_bpf_filter (&dev, addr_count, &filter_address[0],
|
||||
all_multicast, promiscuous, reflections,
|
||||
&filter_address[0],
|
||||
host_phy_addr_list[host_phy_addr_listindex],
|
||||
hash_list[hash_listindex],
|
||||
buf);
|
||||
if (r != SCPE_OK) {
|
||||
++bpf_construct_error_count;
|
||||
sim_printf ("Eth: Error producing a BPF filter for:\n");
|
||||
SIM_PRINT_BPF_ARGUMENTS;
|
||||
}
|
||||
else {
|
||||
if (sim_switches & SWMASK('D')) {
|
||||
SIM_PRINT_BPF_ARGUMENTS;
|
||||
sim_printf ("Eth: BPF string is: |%s|\n", buf);
|
||||
}
|
||||
if (dev.eth_api == ETH_API_PCAP) {
|
||||
struct bpf_program bpf;
|
||||
|
||||
if (pcap_compile ((pcap_t*)dev.handle, &bpf, buf, 1, (bpf_u_int32)0) < 0) {
|
||||
++bpf_compile_error_count;
|
||||
sprintf(errbuf, "%s", pcap_geterr((pcap_t*)dev.handle));
|
||||
sim_printf("Eth: pcap_compile error: %s\n", errbuf);
|
||||
if (!(sim_switches & SWMASK('D'))) {
|
||||
/* show erroneous BPF string */
|
||||
SIM_PRINT_BPF_ARGUMENTS;
|
||||
sim_printf ("Eth: BPF string is: |%s|\n", buf);
|
||||
}
|
||||
}
|
||||
pcap_freecode(&bpf);
|
||||
}
|
||||
else
|
||||
++bpf_compile_skip_count;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
eth_close(&dev);
|
||||
sim_printf ("BPF Filter Count: %d\n", bpf_count);
|
||||
if (bpf_construct_error_count)
|
||||
sim_printf ("BPF Construct Errors: %d\n", bpf_construct_error_count);
|
||||
if (bpf_compile_error_count)
|
||||
sim_printf ("BPF Compile Errors: %d\n", bpf_compile_error_count);
|
||||
if (bpf_compile_skip_count)
|
||||
sim_printf ("BPF Compile Skipped: %d\n", bpf_compile_skip_count);
|
||||
#endif /* USE_BPF */
|
||||
return (errors == 0) ? SCPE_OK : SCPE_IERR;
|
||||
}
|
||||
|
||||
#include <setjmp.h>
|
||||
|
||||
t_stat sim_ether_test (DEVICE *dptr)
|
||||
{
|
||||
return SCPE_OK;
|
||||
t_stat stat = SCPE_OK;
|
||||
SIM_TEST_INIT;
|
||||
|
||||
sim_printf ("Testing %s device sim_ether APIs\n", dptr->name);
|
||||
|
||||
SIM_TEST(eth_test_crc32 (dptr));
|
||||
SIM_TEST(eth_test_bpf (dptr));
|
||||
return stat;
|
||||
}
|
||||
#endif /* USE_NETWORK */
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue