This reverts commit 5551a0dd9c.
The original idea was that the state being put into simh registers would be required to have all useful information available when remote console executed commands. These steps were taken from the code that sim_instr() executed as it was exiting. After this change was made it was realized that once a remote console command executed it might change state that directly affected instruction execution. To solve this, the logic that executes before the instructions in sim_instr() would then need to be executed whenever the event dispatch processing completed. This approach is messy, burdensome and potentially a lot of overhead for every event dispatch even though almost none of the event dispatches would be for remote console command execution. A completely different approach was suggested by J. David Bryan. That alternative approach would be to have remote console commands execute outside of the sim_instr() routine. Thus allowing the existing prelude and postlude code in sim_instr() to be performed naturally and let the remote console activities run in the same context as all other simh commands. Recent changes to scp and sim_console implement this alternative approach and thus these original changes are completely irrelevant and are thus being removed.
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features
1.1 3.5-0
1.1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.1.4 PDP-11
- Revised autoconfigure to handle more casees
2. Bugs Fixed
2.1 3.5-0
2.1.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.1.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.1.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.1.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.1.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.1.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.1.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
2.2 3.5-1
2.2.1 1401
- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings
2.2.2 1620
- Changed character encodings to be compatible with Pierce 709X simulator
2.2.3 PDP-10
- Changed MOVNI to eliminate GCC warning
2.2.4 VAX
- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table
2.2.5 PDP-11
- Fixed bug in autoconfiguration table
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features in 3.4-1
1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.4 PDP-11
- Revised autoconfigure to handle more casees
2. Bugs Fixed in 3.4-1
2.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
1. New Features in 3.3-1
1.1 H316
TTY - implemented paper-tape reader and punch
- added ASCII file support
PTR,PTP - added ASCII file support
1.2 HP2100
CPU - added SET CPU 21MX-M, 21MX-E (from Dave Brian)
- disabled TIMER/EXECUTE/DIAG instructions for 21MX-M (from Dave Bryan)
- added post-processor to maintain T/M consistency (from Dave Bryan)
DS - released 13037 disk controller
1.3 Interdata
MT - added read-only file support
1.4 SDS
MT - added read-only file support
1.5 PDP-11
TM,TS - added read-only file support
2. Bugs Fixed in 3.3
2.1 H316
CPU - fixed bug in divide
LPT - fixed bug in DMA/DMC support
MT - fixed bug in DMA/DMC support
DP - fixed bug in skip on not seeking
TTY - fixed bugs in SKS '104, '504
2.2 HP2100
CPU - fixed DMA reset to clear alternate CTL flop (from Dave Bryan)
- fixed bug in JPY (from Dave Bryan)
- fixed bugs in CBS, SBS, TBS
- separate A/B from M[0/1] for DMA (found by Dave Bryan)
LPS - added restart when set online, etc. (from Dave Bryan)
- fixed col count for non-printing chars (from Dave Bryan)
LPT - added restart when set online, etc. (from Dave Bryan)
2.3 PDP-11
CPU - fixed WAIT to work in all modes (from John Dundas)
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT
enable this feature for normal operations.
WARNING: The core simulator files (scp.c, sim_*.c) have been
reorganized. Unzip V3.2-0 to an empty directory before attempting
to compile the source.
IMPORTANT: If you are compiling for UNIX, please read the notes
for Ethernet very carefully. You may need to download a new
version of the pcap library, or make changes to the makefile,
to get Ethernet support to work.
1. New Features in 3.2-0
1.1 SCP and libraries
- Added SHOW <device> RADIX command.
- Added SHOW <device> MODIFIERS command.
- Added SHOW <device> NAMES command.
- Added SET/SHOW <device> DEBUG command.
- Added sim_vm_parse_addr and sim_vm_fprint_addr optional interfaces.
- Added REG_VMAD flag.
- Split SCP into separate libraries for easier modification.
- Added more room to the device and unit flag fields.
- Changed terminal multiplexor library to support unlimited.
number of async lines.
1.2 All DECtapes
- Added STOP_EOR flag to enable end-of-reel error stop
- Added device debug support.
1.3 Nova and Eclipse
- Added QTY and ALM multiplexors (Bruce Ray).
1.4 LGP-30
- Added LGP-30/LGP-21 simulator.
1.5 PDP-11
- Added format, address increment inhibit, transfer overrun
detection to RK.
- Added device debug support to HK, RP, TM, TQ, TS.
- Added DEUNA/DELUA (XU) support (Dave Hittner).
- Add DZ per-line logging.
1.6 18b PDP's
- Added support for 1-4 (PDP-9)/1-16 (PDP-15) additional
terminals.
1.7 PDP-10
- Added DEUNA/DELUA (XU) support (Dave Hittner).
1.8 VAX
- Added extended memory to 512MB (Mark Pizzolato).
- Added RXV21 support.
2. Bugs Fixed in 3.2-0
2.1 SCP
- Fixed double logging of SHOW BREAK (found by Mark Pizzolato).
- Fixed implementation of REG_VMIO.
2.2 Nova and Eclipse
- Fixed device enable/disable support (found by Bruce Ray).
2.3 PDP-1
- Fixed bug in LOAD (found by Mark Crispin).
2.4 PDP-10
- Fixed bug in floating point unpack.
- Fixed bug in FIXR (found by Phil Stone, fixed by Chris Smith).
2.6 PDP-11
- Fixed bug in RQ interrupt control (found by Tom Evans).
2.6 PDP-18B
- Fixed bug in PDP-15 XVM g_mode implementation.
- Fixed bug in PDP-15 indexed address calculation.
- Fixed bug in PDP-15 autoindexed address calculation.
- Fixed bugs in FPP-15 instruction decode.
- Fixed clock response to CAF.
- Fixed bug in hardware read-in mode bootstrap.
- Fixed PDP-15 XVM instruction decoding errors.
2.7 VAX
- Fixed PC read fault in EXTxV.
- Fixed PC write fault in INSV.
