Mark Pizzolato
27dac1ade2
Added rate limit support (SET DUPn SPEED=bps).
2013-05-29 05:33:51 -07:00
Mark Pizzolato
4ba152db79
Fix packet transmit overrun behaviors which caused DECnet circuit failures.
2013-05-28 17:35:49 -07:00
Mark Pizzolato
4019e670e0
Fixed CRC implementation, CRC state bit presentation and added register declarations
2013-05-28 12:18:32 -07:00
Mark Pizzolato
c3750e6444
Added logic to act on the state and transitions of the RCVEN bit of the receiver CSR.
2013-05-28 01:03:58 -07:00
Mark Pizzolato
89bd58a6fa
Addition of DUP11 simulation to all Unibus simulators (PDP11, PDP10, and all Unibus VAXen)
2013-05-27 16:24:18 -07:00
Mark Pizzolato
76fccce27d
Fix for Issue #53 for DC, DL, and VH multiplexer devices
2013-05-16 11:04:43 -07:00
Mark Pizzolato
e82507d9c8
Fixed DZ bug which referenced the wrong dz device when the number of DZ multiplexers configured was not a power of 2 (i.e.3, 5, 7, etc.)
2013-05-16 10:18:07 -07:00
Mark Pizzolato
d964df4eea
Compiler suggested cleanups
2013-05-09 14:02:48 -07:00
Mark Pizzolato
9faef6ea89
Added separate debugging ability to trace line connect/disconnect activities to better debug virtual null modem cable activities.
2013-05-06 07:50:09 -07:00
Mark Pizzolato
ba87329baa
Fix to properly manage modem DCD and RNG state.
2013-04-17 09:32:48 -07:00
Mark Pizzolato
0f078e9168
Added register field decoding to the debug register trace output
2013-04-17 06:17:55 -07:00
Mark Pizzolato
8e858341f6
Complete returning the DZ modem status information as identified in issue #22 and return RI if DTR is not set, and DCD if it is. This solves the modem behavior issue #24 as well.
2013-04-16 11:03:16 -07:00
Mark Pizzolato
814960e253
Properly restore DZ Modem Control state during a simulator RESTORE.
2013-04-16 09:11:24 -07:00
Mark Pizzolato
93c9f35948
Restore DZ modem control state to default on device detach. Properly clear modem bits when modem control enabled. Better display of modem control status.
2013-04-16 05:33:29 -07:00
Mark Pizzolato
3dd4121c78
Added Large File Support which was missing for NetBSD (and OpenBSD) hosts - reported by Felix Deichmann
2013-04-12 08:17:01 -07:00
Mark Pizzolato
471ea3efce
Added SHOW CPU MEMORY to the MicroVAX I simulator
2013-04-05 14:52:27 -07:00
Mark Pizzolato
732718e5a7
Fixed bug in pdp11_xu loopback processing. Now consistent with pdp11_xq. Found by Paul Koning
2013-03-29 13:44:35 -07:00
Mark Pizzolato
be270bb9c1
Fix of Big Endian DELQA-T issue
2013-03-22 17:39:53 -07:00
Mark Pizzolato
a28d5d7737
Cleaned up the formatting of the pdp11_dmc help output as suggested by Jacob Goense
2013-03-21 09:49:50 -07:00
Mark Pizzolato
c6691b6ff3
Fixed size limit on RQ devices for PDP11 simulator
2013-03-19 10:55:15 -07:00
Mark Pizzolato
960c5b5873
Fix issues observed by Sun C compiler
2013-03-18 12:52:43 -07:00
Mark Pizzolato
2e5b0d54c6
Generalized the sim_disk layer to support large file disk devices (simh, VHD and RAW formats) with out requiring USE_ADDR64, and enhanced the pdp11_rq device to use this capability.
2013-03-17 12:02:43 -07:00
Mark Pizzolato
28f645aeab
Compiler suggested cleanups
2013-03-13 22:28:14 -07:00
Mark Pizzolato
d5ca542102
Changed use of compile #defines which start with a _ character to not do this since defined symbols starting with _ are reserved to local compiler/runtime implementations in the C language. This addresses issue #32
2013-03-12 11:07:58 -07:00
Mark Pizzolato
fb105a922f
Merge remote-tracking branch 'jguillaumes/master'
2013-03-11 22:48:57 -07:00
Mark Pizzolato
374b13f946
Fixes to infinite loop issues found by Mikulas Patocka
2013-03-05 11:40:33 -08:00
Mark Pizzolato
7b01cd11f2
Fix identified by Mikulas Patocka.
...
The problem is that Map_ReadW reads 16-bit words from guest's memory and stores them in host-endian-byte-order in xq_turbo_init_block. Most entries in xq_turbo_init_block are 16-bit words (thus it is ok that they are stored in host-endian-byte-order), but there are three fields in this data structure which are referenced as byte oriented fields. (phys, hash_filter and bootpassword). These fields need to be handled in byte order to be properly interpreted.
2013-03-05 11:38:28 -08:00
Jordi Guillaumes i Pons
37af573a1e
CR11: Added 026DEC translation table. Fixed bit clearing after CSR write,
...
source reformatting and commenting, other minor changes.º:º
2013-03-02 17:15:26 +01:00
Mark Pizzolato
4d187a7ada
Another typo
2013-02-06 17:48:43 -08:00
Mark Pizzolato
74b8a7d4e8
Fixed typo in help text
2013-02-06 17:47:18 -08:00
Mark Pizzolato
63d0cdbd38
Display something descriptive when a peer hasn't been specified yet.
2013-02-05 11:44:55 -08:00
Mark Pizzolato
c5bd79f05d
Add register descriptions and help to the pdp11_pt devices (PTR, PTP).
2013-02-05 11:13:18 -08:00
Mark Pizzolato
e59d9c1599
Added register descriptions and help to pdp11_rp device
2013-02-05 10:51:15 -08:00
Mark Pizzolato
65079ca8f6
Added register descriptions and help for pdp11_hk device
2013-02-05 10:20:13 -08:00
Mark Pizzolato
08e97d5882
Corrected error in pdp11_rq help routine
2013-02-05 09:41:55 -08:00
Mark Pizzolato
387b72cebb
Added register definitions and imbedded help to the pdp11_cr device
2013-02-05 09:05:52 -08:00
Mark Pizzolato
56be3b060f
Added register definitions and descriptions to the pdp11_vh device
2013-02-05 07:57:25 -08:00
Mark Pizzolato
610ecaaa93
Adding mode device help
2013-02-05 06:49:39 -08:00
Mark Pizzolato
453890f3d7
Adding more device help
2013-02-05 04:41:48 -08:00
Mark Pizzolato
ef13fdd0dc
Fixed to once again display the DZ vector
2013-02-05 04:40:41 -08:00
Mark Pizzolato
c53cbd68eb
Removed 8 bit characters from pdp11_dmc help text
2013-02-04 18:22:00 -08:00
Mark Pizzolato
d65b12da84
Excape from doubly nested loop quickly for efficiency
2013-02-04 13:55:09 -08:00
Mark Pizzolato
7bd01a5873
Added device help and register descriptions
2013-02-04 13:52:59 -08:00
Mark Pizzolato
6b4353f257
Returned the pdp11_cr device to the VAX Qbus systems and changed the pdp11_cr device to properly describe itself as a Qbus capable device when CR11 device is being simulated since it is a programmed I/O device and doesn't have bus addressing issues that DMA devices have.
2013-02-04 06:53:10 -08:00
Mark Pizzolato
8a97baa553
Added MTAB entry descriptions
2013-02-04 04:29:39 -08:00
Mark Pizzolato
8640cd6537
- Removed pdp11_cr and pdp11_ry from the Qbus VAX simulators since these devices can't address the full Q22 address range.
...
- Added validation checks in auto_config to reject enabled devices which aren't Q22 capable on Q22 platforms.
- Changed pdp11_cr device to be default disabled in the PDP11 simulator
2013-02-03 11:29:12 -08:00
Mark Pizzolato
55693fb9b3
Added missing MOD_VALR flag on some recently revised MTAB entries
2013-02-02 17:27:22 -08:00
Mark Pizzolato
28b90552b7
Revised all VAX simulator devices to have proper help information defined to make "HELP dev SHOW" and "HELP dev SET" most useful.
2013-02-02 16:29:38 -08:00
Mark Pizzolato
0eba66c72a
Avoid an internal error status if the pdp11_dc device ever did a SET DC ADDRESS=
2013-02-02 06:43:18 -08:00
Mark Pizzolato
8f170b0e40
Fixed modifier table to properly declare things which are showable vs settable, added modifier descriptions as appropriate
2013-01-31 16:18:38 -08:00
