3 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Bob Supnik
|
e2ba672610 |
Notes For V3.2-1
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT enable this feature for normal operations. 1. New Features in 3.2-1 1.1 SCP and libraries - Added SET CONSOLE subhierarchy. - Added SHOW CONSOLE subhierarchy. - Added limited keyboard mapping capability. 1.2 HP2100 (new features from Dave Bryan) - Added instruction printout to HALT message. - Added M and T internal registers. - Added N, S, and U breakpoints. 1.3 PDP-11 and VAX - Added DHQ11 support (from John Dundas) 2. Bugs Fixed in 3.2-1 2.1 HP2100 (most fixes from Dave Bryan) - SBT increments B after store. - DMS console map must check dms_enb. - SFS x,C and SFC x,C work. - MP violation clears automatically on interrupt. - SFS/SFC 5 is not gated by protection enabled. - DMS enable does not disable mem prot checks. - DMS status inconsistent at simulator halt. - Examine/deposit are checking wrong addresses. - Physical addresses are 20b not 15b. - Revised DMS to use memory rather than internal format. - Revised IBL facility to conform to microcode. - Added DMA EDT I/O pseudo-opcode. - Separated DMA SRQ (service request) from FLG. - Revised peripherals to make SFS x,C and SFC x,C work. - Revised boot ROMs to use IBL facility. - Revised IBL treatment of SR to preserve SR<5:3>. - Fixed LPS, LPT timing. - Fixed DP boot interpretation of SR<0>. - Revised DR boot code to use IBL algorithm. - Fixed TTY input behavior during typeout for RTE-IV. - Suppressed nulls on TTY output for RTE-IV. - Added SFS x,C and SFC x,C to print/parse routines. - Fixed spurious timing error in magtape reads. 2.2 All DEC console devices - Removed SET TTI CTRL-C option. 2.3 PDP-11/VAX peripherals - Fixed bug in TQ reporting write protect status (reported by Lyle Bickley). - Fixed TK70 model number and media ID (found by Robert Schaffrath). - Fixed bug in autoconfigure (found by John Dundas). 2.4 VAX - Fixed bug in DIVBx and DIVWx (reported by Peter Trimmel). |
||
|
Bob Supnik
|
1da2d9452d |
Notes For V3.1-0
RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially debugged. Do NOT enable these features for normal operations. 1. New Features in 3.1-0 1.1 SCP and libraries - Added simulated Ethernet support for VMS, FreeBSD, Mac OS/X. - Added status return to tmxr_putc_ln. - Added sim_putchar_s to handle possible output stalls. 1.2 All DECtapes - Added "DECtape off reel" error stop. 1.3 All Asynchronous Consoles - Added support for output congestion stall if using a Telnet connection. 1.4 PDP-1 - Added Type 23 parallel drum support. 1.5 PDP-8 - Added instruction history. - Added TSC8-75 option support for ETOS. - Added TD8E DECtape support. 1.6 PDP-18b - Added instruction history. - Changed PDP-9, PDP-15 API default to enabled. 1.7 PDP-11 - Added support for 18b only Qbus devices. - Formalized bus and addressing definitions. - Added control to enable/disable autoconfiguration. - Added stub support for second Unibus Ethernet controller. 1.7 Interdata 32b - Added instruction history. 1.8 Eclipse - Added floating point support. - Added programmable interval timer support. 1.9 H316 - Added DMA/DMC support. - Added fixed head disk support. - Added moving head disk support. - Added magtape support. 1.10 IBM 1130 (Brian Knittel) - Added support for physical card reader, using the Cardread interface (www.ibm1130.org/sim/downloads). - Added support for physical printer (flushes output buffer after each line). 2. Bugs Fixed in 3.1-0 2.1 SCP and libraries - Fixed numerous bugs in Ethernet library. 2.2 All DECtapes - Fixed reverse checksum value in 'read all' mode. - Simplified (and sped up) timing. 2.3 PDP-8 - Fixed bug in RX28 read status (found by Charles Dickman). - Fixed RX28 double density write. 2.4 PDP-18b - Fixed autoincrement bug in PDP-4, PDP-7, PDP-9. 2.5 PDP-11/VAX - Revised RQ MB->LBN conversion for greater accuracy. - Fixed bug in IO configuration (found by David Hittner). - Fixed bug with multiple RQ RAUSER drives. - Fixed bug in second Qbus Ethernet controller interrupts. 2.6 Nova/Eclipse - Fixed bugs in DKP flag clear, map setup, map usage (Charles Owen). - Fixed bug in MT, reset completes despite I/O reset (Charles Owen). - Fixed bug in MT, space operations return word count (Charles Owen). 2.7 IBM 1130 (Brian Knittel) - Fixed bug in setting carry bit in subtract and subtract double. - Fixed timing problem in console printer simulation. 2.8 1620 - Fixed bug in branch digit (found by Dave Babcock). 3. New Features in 3.0 vs prior releases 3.1 SCP and Libraries - Added ASSIGN/DEASSIGN (logical name) commands. - Changed RESTORE to unconditionally detach files. - Added E11 and TPC format support to magtape library. - Fixed bug in SHOW CONNECTIONS. - Added USE_ADDR64 support. 3.2 All magtapes - Magtapes support SIMH format, E11 format, and TPC format (read only). - SET <tape_unit> FORMAT=format sets the specified tape unit's format. - SHOW <tape_unit> FORMAT displays the specified tape unit's format. - Tape format can also be set as part of the ATTACH command, using the -F switch. 3.3 VAX - VAX can be compiled without USE_INT64. - If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support files > 2GB. - VAX ROM has speed control (SET ROM DELAY/NODELAY). 3.4 PDP-1 - Added block loader format support to LOAD. - Changed BOOT PTR to allow loading of all of the first bank of memory. - The LOAD command takes an optional argument specifying the memory field to be loaded. - The PTR BOOT command takes its starting memory field from the TA (address switch) register. 3.5 PDP-18b Family - Added PDP-4 EAE support. - Added PDP-15 FP15 support. - Added PDP-15 XVM support. - Added PDP-15 "re-entrancy ECO". - Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR. 4. Bugs Fixed in 3.0 vs prior releases 4.1 SCP and Libraries - Fixed end of file problem in dep, idep. - Fixed handling of trailing spaces in dep, idep. 4.2 VAX - Fixed CVTfi bug: integer overflow not set if exponent out of range - Fixed EMODx bugs: o First and second operands reversed o Separated fraction received wrong exponent o Overflow calculation on separated integer incorrect o Fraction not set to zero if exponent out of range - Fixed interval timer and ROM access to pass power-up self-test even on very fast host processors (fixes from Mark Pizzolato). - Fixed bug in user disk size (found by Chaskiel M Grundman). 4.3 1401 - Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS. - Fixed MCE bug, BS off by 1 if zero suppress. - Fixed chaining bug, D lost if return to SCP. - Fixed H branch, branch occurs after continue. - Added check for invalid 8 character MCW, LCA. - Fixed magtape load-mode end of record response. - Revised fetch to model hardware more closely. - Fixed tape read end-of-record handling based on real 1401. - Added diagnostic read (space forward). 4.4 Nova - Fixed DSK variable size interaction with restore. - Fixed bug in DSK set size routine. 4.5 PDP-1 - Fixed DT variable size interaction with restore. - Updated CPU, line printer, standard devices to detect indefinite I/O wait. - Fixed incorrect logical, missing activate, break in drum simulator. - Fixed bugs in instruction decoding, overprinting for line printer. - Fixed system hang if continue after PTR error. - Fixed PTR to start/stop on successive rpa instructions. 4.6 PDP-11 - Fixed DT variable size interaction with restore. - Fixed bug in MMR1 update (found by Tim Stark). - Added XQ features and fixed bugs: o Corrected XQ interrupts on IE state transition (code by Tom Evans). o Added XQ interrupt clear on soft reset. o Removed XQ interrupt when setting XL or RL (multiple people). o Added SET/SHOW XQ STATS. o Added SHOW XQ FILTERS. o Added ability to split received packet into multiple buffers. o Added explicit runt and giant packet processing. - Fixed bug in user disk size (found by Chaskiel M Grundman). 4.7 PDP-18B - Fixed DT, RF variable size interaction with restore. - Fixed MT bug in MTTR. - Fixed bug in PDP-4 line printer overprinting. - Fixed bug in PDP-15 memory protect/skip interaction. - Fixed bug in RF set size routine. - Increased PTP TIME for PDP-15 operating systems. - Fixed priorities in PDP-15 API (differs from PDP-9). - Fixed sign handling in PDP-15 EAE unsigned mul/div (differs from PDP-9). - Fixed bug in CAF, clears API subsystem. 4.8 PDP-8 - Fixed DT, DF, RF, RX variable size interaction with restore. - Fixed MT bug in SKTR. - Fixed bug in DF, RF set size routine. 4.9 HP2100 - Fixed bug in DP (13210A controller only), DQ read status. - Fixed bug in DP, DQ seek complete. - Fixed DR drum sizes. - Fixed DR variable capacity interaction with SAVE/RESTORE. 4.10 GRI - Fixed bug in SC queue pointer management. 4.11 PDP-10 - Fixed bug in RP read header. 4.12 Ibm1130 - Fixed bugs found by APL 1130. 4.13 Altairz80 - Fixed bug in real-time clock on Windows host. 4.14 1620 - Fixed bug in immediate index add (found by Michael Short). |
||
|
Bob Supnik
|
2bcd1e7c4c |
Notes For V2.10-2
1. New Features in 2.10-2
The build procedures have changed. There is only one UNIX makefile.
To compile without Ethernet support, simply type
gmake {target|all}
To compile with Ethernet support, type
gmake USE_NETWORK=1 {target|all}
The Mingw batch files require Mingw release 2 and invoke the Unix
makefile. There are still separate batch files for compilation
with or without Ethernet support.
1.1 SCP and Libraries
- The EVAL command will evaluate a symbolic type-in and display
it in numeric form.
- The ! command (with no arguments) will launch the host operating
system command shell. The ! command (with an argument) executes
the argument as a host operating system command. (Code from
Mark Pizzolato)
- Telnet sessions now recognize BREAK. How a BREAK is transmitted
dependent on the particular Telnet client. (Code from Mark
Pizzolato)
- The sockets library includes code for active connections as
well as listening connections.
- The RESTORE command will restore saved memory size, if the
simulator supports dynamic memory resizing.
1.2 PDP-1
- The PDP-1 supports the Type 24 serial drum (based on recently
discovered documents).
1.3 18b PDP's
- The PDP-4 supports the Type 24 serial drum (based on recently
discovered documents).
1.4 PDP-11
- The PDP-11 implements a stub DEUNA/DELUA (XU). The real XU
module will be included in a later release.
1.5 PDP-10
- The PDP-10 implements a stub DEUNA/DELUA (XU). The real XU
module will be included in a later release.
1.6 HP 2100
- The IOP microinstruction set is supported for the 21MX as well
as the 2100.
- The HP2100 supports the Access Interprocessor Link (IPL).
1.7 VAX
- If the VAX console is attached to a Telnet session, BREAK is
interpreted as console halt.
- The SET/SHOW HISTORY commands enable and display a history of
the most recently executed instructions. (Code from Mark
Pizzolato)
1.8 Terminals Multiplexors
- BREAK detection was added to the HP, DEC, and Interdata terminal
multiplexors.
1.9 Interdata 16b and 32b
- First release. UNIX is not yet working.
1.10 SDS 940
- First release.
2. Bugs Fixed in 2.10-2
- PDP-11 console must default to 7b for early UNIX compatibility.
- PDP-11/VAX TMSCP emulator was using the wrong packet length for
read/write end packets.
- Telnet IAC+IAC processing was fixed, both for input and output
(found by Mark Pizzolato).
- PDP-11/VAX Ethernet setting flag bits wrong for chained
descriptors (found by Mark Pizzolato).
3. New Features in 2.10 vs prior releases
3.1 SCP and Libraries
- The VT emulation package has been replaced by the capability
to remote the console to a Telnet session. Telnet clients
typically have more complete and robust VT100 emulation.
- Simulated devices may now have statically allocated buffers,
in addition to dynamically allocated buffers or disk-based
data stores.
- The DO command now takes substitutable arguments (max 9).
In command files, %n represents substitutable argument n.
- The initial command line is now interpreted as the command
name and substitutable arguments for a DO command. This is
backward compatible to prior versions.
- The initial command line parses switches. -Q is interpreted
as quiet mode; informational messages are suppressed.
- The HELP command now takes an optional argument. HELP <cmd>
types help on the specified command.
- Hooks have been added for implementing GUI-based consoles,
as well as simulator-specific command extensions. A few
internal data structures and definitions have changed.
- Two new routines (tmxr_open_master, tmxr_close_master) have
been added to sim_tmxr.c. The calling sequence for
sim_accept_conn has been changed in sim_sock.c.
- The calling sequence for the VM boot routine has been modified
to add an additional parameter.
- SAVE now saves, and GET now restores, controller and unit flags.
- Library sim_ether.c has been added for Ethernet support.
3.2 VAX
- Non-volatile RAM (NVR) can behave either like a memory or like
a disk-based peripheral. If unattached, it behaves like memory
and is saved and restored by SAVE and RESTORE, respectively.
If attached, its contents are loaded from disk by ATTACH and
written back to disk at DETACH and EXIT.
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape) has been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from vax_stddev.c and
now references a common implementation file, dec_pt.h.
- Examine and deposit switches now work on all devices, not just
the CPU.
- Device address conflicts are not detected until simulation starts.
3.3 PDP-11
- SHOW <device> VECTOR displays the device's interrupt vector.
Most devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape), RK611/RK06/RK07 (cartridge disk),
RX211 (double density floppy), and KW11P programmable clock
have been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from pdp11_stddev.c and
now references a common implementation file, dec_pt.h.
- Device bootstraps now use the actual CSR specified by the
SET ADDRESS command, rather than just the default CSR. Note
that PDP-11 operating systems may NOT support booting with
non-standard addresses.
- Specifying more than 256KB of memory, or changing the bus
configuration, causes all peripherals that are not compatible
with the current bus configuration to be disabled.
- Device address conflicts are not detected until simulation starts.
3.4 PDP-10
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The RX211 (double density floppy) has been added; it is off
by default.
- The paper tape now references a common implementation file,
dec_pt.h.
- Device address conflicts are not detected until simulation starts.
3.5 PDP-1
- DECtape (then known as MicroTape) support has been added.
- The line printer and DECtape can be disabled and enabled.
3.6 PDP-8
- The RX28 (double density floppy) has been added as an option to
the existing RX8E controller.
- SHOW <device> DEVNO displays the device's device number. Most
devices allow the device number to be changed with SET <device>
DEVNO=nnn.
- Device number conflicts are not detected until simulation starts.
3.7 IBM 1620
- The IBM 1620 simulator has been released.
3.8 AltairZ80
- A hard drive has been added for increased storage.
- Several bugs have been fixed.
3.9 HP 2100
- The 12845A has been added and made the default line printer (LPT).
The 12653A has been renamed LPS and is off by default. It also
supports the diagnostic functions needed to run the DCPC and DMS
diagnostics.
- The 12557A/13210A disk defaults to the 13210A (7900/7901).
- The 12559A magtape is off by default.
- New CPU options (EAU/NOEAU) enable/disable the extended arithmetic
instructions for the 2116. These instructions are standard on
the 2100 and 21MX.
- New CPU options (MPR/NOMPR) enable/disable memory protect for the
2100 and 21MX.
- New CPU options (DMS/NODMS) enable/disable the dynamic mapping
instructions for the 21MX.
- The 12539 timebase generator autocalibrates.
3.10 Simulated Magtapes
- Simulated magtapes recognize end of file and the marker
0xFFFFFFFF as end of medium. Only the TMSCP tape simulator
can generate an end of medium marker.
- The error handling in simulated magtapes was overhauled to be
consistent through all simulators.
3.11 Simulated DECtapes
- Added support for RT11 image file format (256 x 16b) to DECtapes.
4. Bugs Fixed in 2.10 vs prior releases
- TS11/TSV05 was not simulating the XS0_MOT bit, causing failures
under VMS. In addition, two of the CTL options were coded
interchanged.
- IBM 1401 tape was not setting a word mark under group mark for
load mode reads. This caused the diagnostics to crash.
- SCP bugs in ssh_break and set_logon were fixed (found by Dave
Hittner).
- Numerous bugs in the HP 2100 extended arithmetic, floating point,
21MX, DMS, and IOP instructions were fixed. Bugs were also fixed
in the memory protect and DMS functions. The moving head disks
(DP, DQ) were revised to simulate the hardware more accurately.
Missing functions in DQ (address skip, read address) were added.
- PDP-10 tape wouldn't boot, and then wouldn't read (reported by
Michael Thompson and Harris Newman, respectively)
- PDP-1 typewriter is half duplex, with only one shift state for
both input and output (found by Derek Peschel)
5. General Notes
WARNING: V2.10 has reorganized and renamed some of the definition
files for the PDP-10, PDP-11, and VAX. Be sure to delete all
previous source files before you unpack the Zip archive, or
unpack it into a new directory structure.
WARNING: V2.10 has a new, more comprehensive save file format.
Restoring save files from previous releases will cause 'invalid
register' errors and loss of CPU option flags, device enable/
disable flags, unit online/offline flags, and unit writelock
flags.
WARNING: If you are using Visual Studio .NET through the IDE,
be sure to turn off the /Wp64 flag in the project settings, or
dozens of spurious errors will be generated.
WARNING: Compiling Ethernet support under Windows requires
extra steps; see the Ethernet readme file. Ethernet support is
currently available only for Windows, Linux, NetBSD, and OpenBSD.
|
Renamed from Ibm1130/asm1130.mak (Browse further)