- Initialize local state variable to 0. Likely non functional changes due
to lack of depth in static analysis scan. Coverity detects real problems
like this.
- Migrate use of strncpy to strlcpy to assure safe buffer operations
These changes facilitate more robust parameter type checking and helps
to identify unexpected coding errors.
Most simulators can now also be compiled with a C++ compiler without
warnings.
Additionally, these changes have also been configured to facilitate easier
backporting of simulator and device simulation modules to run under the
simh v3.9+ SCP framework.
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT
enable this feature for normal operations.
WARNING: The core simulator files (scp.c, sim_*.c) have been
reorganized. Unzip V3.2-0 to an empty directory before attempting
to compile the source.
IMPORTANT: If you are compiling for UNIX, please read the notes
for Ethernet very carefully. You may need to download a new
version of the pcap library, or make changes to the makefile,
to get Ethernet support to work.
1. New Features in 3.2-0
1.1 SCP and libraries
- Added SHOW <device> RADIX command.
- Added SHOW <device> MODIFIERS command.
- Added SHOW <device> NAMES command.
- Added SET/SHOW <device> DEBUG command.
- Added sim_vm_parse_addr and sim_vm_fprint_addr optional interfaces.
- Added REG_VMAD flag.
- Split SCP into separate libraries for easier modification.
- Added more room to the device and unit flag fields.
- Changed terminal multiplexor library to support unlimited.
number of async lines.
1.2 All DECtapes
- Added STOP_EOR flag to enable end-of-reel error stop
- Added device debug support.
1.3 Nova and Eclipse
- Added QTY and ALM multiplexors (Bruce Ray).
1.4 LGP-30
- Added LGP-30/LGP-21 simulator.
1.5 PDP-11
- Added format, address increment inhibit, transfer overrun
detection to RK.
- Added device debug support to HK, RP, TM, TQ, TS.
- Added DEUNA/DELUA (XU) support (Dave Hittner).
- Add DZ per-line logging.
1.6 18b PDP's
- Added support for 1-4 (PDP-9)/1-16 (PDP-15) additional
terminals.
1.7 PDP-10
- Added DEUNA/DELUA (XU) support (Dave Hittner).
1.8 VAX
- Added extended memory to 512MB (Mark Pizzolato).
- Added RXV21 support.
2. Bugs Fixed in 3.2-0
2.1 SCP
- Fixed double logging of SHOW BREAK (found by Mark Pizzolato).
- Fixed implementation of REG_VMIO.
2.2 Nova and Eclipse
- Fixed device enable/disable support (found by Bruce Ray).
2.3 PDP-1
- Fixed bug in LOAD (found by Mark Crispin).
2.4 PDP-10
- Fixed bug in floating point unpack.
- Fixed bug in FIXR (found by Phil Stone, fixed by Chris Smith).
2.6 PDP-11
- Fixed bug in RQ interrupt control (found by Tom Evans).
2.6 PDP-18B
- Fixed bug in PDP-15 XVM g_mode implementation.
- Fixed bug in PDP-15 indexed address calculation.
- Fixed bug in PDP-15 autoindexed address calculation.
- Fixed bugs in FPP-15 instruction decode.
- Fixed clock response to CAF.
- Fixed bug in hardware read-in mode bootstrap.
- Fixed PDP-15 XVM instruction decoding errors.
2.7 VAX
- Fixed PC read fault in EXTxV.
- Fixed PC write fault in INSV.
RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially
debugged. Do NOT enable these features for normal operations.
1. New Features in 3.1-0
1.1 SCP and libraries
- Added simulated Ethernet support for VMS, FreeBSD, Mac OS/X.
- Added status return to tmxr_putc_ln.
- Added sim_putchar_s to handle possible output stalls.
1.2 All DECtapes
- Added "DECtape off reel" error stop.
1.3 All Asynchronous Consoles
- Added support for output congestion stall if using a Telnet connection.
1.4 PDP-1
- Added Type 23 parallel drum support.
1.5 PDP-8
- Added instruction history.
- Added TSC8-75 option support for ETOS.
- Added TD8E DECtape support.
1.6 PDP-18b
- Added instruction history.
- Changed PDP-9, PDP-15 API default to enabled.
1.7 PDP-11
- Added support for 18b only Qbus devices.
- Formalized bus and addressing definitions.
- Added control to enable/disable autoconfiguration.
- Added stub support for second Unibus Ethernet controller.
1.7 Interdata 32b
- Added instruction history.
1.8 Eclipse
- Added floating point support.
- Added programmable interval timer support.
1.9 H316
- Added DMA/DMC support.
- Added fixed head disk support.
- Added moving head disk support.
- Added magtape support.
1.10 IBM 1130 (Brian Knittel)
- Added support for physical card reader, using the Cardread
interface (www.ibm1130.org/sim/downloads).
- Added support for physical printer (flushes output buffer after
each line).
2. Bugs Fixed in 3.1-0
2.1 SCP and libraries
- Fixed numerous bugs in Ethernet library.
2.2 All DECtapes
- Fixed reverse checksum value in 'read all' mode.
- Simplified (and sped up) timing.
2.3 PDP-8
- Fixed bug in RX28 read status (found by Charles Dickman).
- Fixed RX28 double density write.
2.4 PDP-18b
- Fixed autoincrement bug in PDP-4, PDP-7, PDP-9.
2.5 PDP-11/VAX
- Revised RQ MB->LBN conversion for greater accuracy.
- Fixed bug in IO configuration (found by David Hittner).
- Fixed bug with multiple RQ RAUSER drives.
- Fixed bug in second Qbus Ethernet controller interrupts.
2.6 Nova/Eclipse
- Fixed bugs in DKP flag clear, map setup, map usage (Charles Owen).
- Fixed bug in MT, reset completes despite I/O reset (Charles Owen).
- Fixed bug in MT, space operations return word count (Charles Owen).
2.7 IBM 1130 (Brian Knittel)
- Fixed bug in setting carry bit in subtract and subtract double.
- Fixed timing problem in console printer simulation.
2.8 1620
- Fixed bug in branch digit (found by Dave Babcock).
3. New Features in 3.0 vs prior releases
3.1 SCP and Libraries
- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support.
3.2 All magtapes
- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
the -F switch.
3.3 VAX
- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).
3.4 PDP-1
- Added block loader format support to LOAD.
- Changed BOOT PTR to allow loading of all of the first bank of memory.
- The LOAD command takes an optional argument specifying the memory field
to be loaded.
- The PTR BOOT command takes its starting memory field from the TA (address
switch) register.
3.5 PDP-18b Family
- Added PDP-4 EAE support.
- Added PDP-15 FP15 support.
- Added PDP-15 XVM support.
- Added PDP-15 "re-entrancy ECO".
- Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR.
4. Bugs Fixed in 3.0 vs prior releases
4.1 SCP and Libraries
- Fixed end of file problem in dep, idep.
- Fixed handling of trailing spaces in dep, idep.
4.2 VAX
- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
o First and second operands reversed
o Separated fraction received wrong exponent
o Overflow calculation on separated integer incorrect
o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
fast host processors (fixes from Mark Pizzolato).
- Fixed bug in user disk size (found by Chaskiel M Grundman).
4.3 1401
- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
- Revised fetch to model hardware more closely.
- Fixed tape read end-of-record handling based on real 1401.
- Added diagnostic read (space forward).
4.4 Nova
- Fixed DSK variable size interaction with restore.
- Fixed bug in DSK set size routine.
4.5 PDP-1
- Fixed DT variable size interaction with restore.
- Updated CPU, line printer, standard devices to detect indefinite I/O wait.
- Fixed incorrect logical, missing activate, break in drum simulator.
- Fixed bugs in instruction decoding, overprinting for line printer.
- Fixed system hang if continue after PTR error.
- Fixed PTR to start/stop on successive rpa instructions.
4.6 PDP-11
- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
o Corrected XQ interrupts on IE state transition (code by Tom Evans).
o Added XQ interrupt clear on soft reset.
o Removed XQ interrupt when setting XL or RL (multiple people).
o Added SET/SHOW XQ STATS.
o Added SHOW XQ FILTERS.
o Added ability to split received packet into multiple buffers.
o Added explicit runt and giant packet processing.
- Fixed bug in user disk size (found by Chaskiel M Grundman).
4.7 PDP-18B
- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
- Fixed bug in PDP-4 line printer overprinting.
- Fixed bug in PDP-15 memory protect/skip interaction.
- Fixed bug in RF set size routine.
- Increased PTP TIME for PDP-15 operating systems.
- Fixed priorities in PDP-15 API (differs from PDP-9).
- Fixed sign handling in PDP-15 EAE unsigned mul/div (differs from PDP-9).
- Fixed bug in CAF, clears API subsystem.
4.8 PDP-8
- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
- Fixed bug in DF, RF set size routine.
4.9 HP2100
- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
- Fixed DR drum sizes.
- Fixed DR variable capacity interaction with SAVE/RESTORE.
4.10 GRI
- Fixed bug in SC queue pointer management.
4.11 PDP-10
- Fixed bug in RP read header.
4.12 Ibm1130
- Fixed bugs found by APL 1130.
4.13 Altairz80
- Fixed bug in real-time clock on Windows host.
4.14 1620
- Fixed bug in immediate index add (found by Michael Short).
RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially
debugged. Do NOT enable these features for normal operations.
1. New Features in 3.0-1
1.1 PDP-1
- Added block loader format support to LOAD.
- Changed BOOT PTR to allow loading of all of the first bank of memory.
1.2 PDP-18b Family
- Added PDP-4 EAE support.
- Added PDP-15 FP15 support.
- Added PDP-15 XVM support.
- Added PDP-15 "re-entrancy ECO".
- Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR.
2. Bugs Fixed in 3.0-1
2.1 PDP-11/VAX
- Fixed bug in user disk size (found by Chaskiel M Grundman).
2.2 PDP-1
- Updated CPU, line printer, standard devices to detect indefinite I/O wait.
- Fixed incorrect logical, missing activate, break in drum simulator.
- Fixed bugs in instruction decoding, overprinting for line printer.
2.3 PDP-10
- Fixed bug in RP read header.
2.4 PDP-18b Family
- Fixed bug in PDP-4 line printer overprinting.
- Fixed bug in PDP-15 memory protect/skip interaction.
- Fixed bug in RF set size routine.
- Increased PTP TIME for PDP-15 operating systems.
2.5 PDP-8
- Fixed bug in DF, RF set size routine.
2.6 Nova
- Fixed bug in DSK set size routine.
2.7 1401
- Revised fetch to model hardware more closely.
2.8 Ibm1130
- Fixed bugs found by APL 1130.
2.9 Altairz80
- Fixed bug in real-time clock on Windows host.
2.10 HP2100
-- Fixed DR drum sizes.
-- Fixed DR variable capacity interaction with SAVE/RESTORE.
3. New Features in 3.0 vs prior releases
3.1 SCP and Libraries
- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support
3.2 All magtapes
- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
the -F switch.
3.3 VAX
- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).
4. Bugs Fixed in 3.0 vs prior releases
4.1 VAX
- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
o First and second operands reversed
o Separated fraction received wrong exponent
o Overflow calculation on separated integer incorrect
o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
fast host processors (fixes from Mark Pizzolato).
4.2 1401
- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
4.3 Nova
- Fixed DSK variable size interaction with restore.
4.4 PDP-1
- Fixed DT variable size interaction with restore.
4.5 PDP-11
- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
o Corrected XQ interrupts on IE state transition (code by Tom Evans).
o Added XQ interrupt clear on soft reset.
o Removed XQ interrupt when setting XL or RL (multiple people).
o Added SET/SHOW XQ STATS.
o Added SHOW XQ FILTERS.
o Added ability to split received packet into multiple buffers.
o Added explicit runt and giant packet processing.
4.6 PDP-18B
- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
4.7 PDP-8
- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
4.8 HP2100
- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
4.9 GRI
- Fixed bug in SC queue pointer management.
Mark Pizzolato
Bob Supnik