/* pdp11_ry.c: RX211/RXV21/RX02 floppy disk simulator
Copyright (c) 1993-2013, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
ry RX211/RXV21/RX02 floppy disk
23-Oct-13 RMS Revised for new boot setup routine
03-Sep-13 RMS Added explicit void * cast
15-May-06 RMS Fixed bug in autosize attach (David Gesswein)
07-Jul-05 RMS Removed extraneous externs
18-Feb-05 RMS Fixed bug in boot code (Graham Toal)
30-Sep-04 RMS Revised Unibus interface
21-Mar-04 RMS Added VAX support
29-Dec-03 RMS Added RXV21 support
19-May-03 RMS Revised for new conditional compilation scheme
25-Apr-03 RMS Revised for extended file support
14-Mar-03 RMS Fixed variable size interaction with save/restore
03-Mar-03 RMS Fixed autosizing
12-Oct-02 RMS Added autoconfigure support
An RX02 diskette consists of 77 tracks, each with 26 sectors of 256B.
Tracks are numbered 0-76, sectors 1-26.
*/
#if defined (VM_PDP10) /* PDP10 version */
#include "pdp10_defs.h"
#define DEV_DISI DEV_DIS
#elif defined (VM_VAX) /* VAX version */
#include "vax_defs.h"
#define DEV_DISI 0
#else /* PDP-11 version */
#include "pdp11_defs.h"
#define DEV_DISI DEV_DIS
#endif
#define RX_NUMTR 77 /* tracks/disk */
#define RX_M_TRACK 0377
#define RX_NUMSC 26 /* sectors/track */
#define RX_M_SECTOR 0177
#define RX_NUMBY 128
#define RX_SIZE (RX_NUMTR * RX_NUMSC * RX_NUMBY)
#define RY_NUMBY 256 /* bytes/sector */
#define RY_SIZE (RX_NUMTR * RX_NUMSC * RY_NUMBY)
#define RX_NUMDR 2 /* drives/controller */
#define RX_M_NUMDR 01
#define UNIT_V_WLK (UNIT_V_UF) /* write locked */
#define UNIT_V_DEN (UNIT_V_UF + 1) /* double density */
#define UNIT_V_AUTO (UNIT_V_UF + 2) /* autosize */
#define UNIT_WLK (1u << UNIT_V_WLK)
#define UNIT_DEN (1u << UNIT_V_DEN)
#define UNIT_AUTO (1u << UNIT_V_AUTO)
#define UNIT_WPRT (UNIT_WLK | UNIT_RO) /* write protect */
#define IDLE 0 /* idle state */
#define RWDS 1 /* rw, sect next */
#define RWDT 2 /* rw, track next */
#define RWXFR 3 /* rw, transfer */
#define FEWC 4 /* fill empty, wc next */
#define FEBA 5 /* fill empty, ba next */
#define FEXFR 6 /* fill empty, transfer */
#define SDCNF 7 /* set dens, conf next */
#define SDXFR 8 /* set dens, transfer */
#define ESBA 9 /* ext sta, ba next */
#define ESXFR 10 /* ext sta, transfer */
#define CMD_COMPLETE 11 /* set done next */
#define INIT_COMPLETE 12 /* init compl next */
#define RYCS_V_FUNC 1 /* function */
#define RYCS_M_FUNC 7
#define RYCS_FILL 0 /* fill buffer */
#define RYCS_EMPTY 1 /* empty buffer */
#define RYCS_WRITE 2 /* write sector */
#define RYCS_READ 3 /* read sector */
#define RYCS_SDEN 4 /* set density */
#define RYCS_RYES 5 /* read status */
#define RYCS_WRDEL 6 /* write del data */
#define RYCS_ESTAT 7 /* read ext status */
#define RYCS_V_DRV 4 /* drive select */
#define RYCS_V_DONE 5 /* done */
#define RYCS_V_IE 6 /* int enable */
#define RYCS_V_TR 7 /* xfer request */
#define RYCS_V_DEN 8 /* density select */
#define RYCS_V_RY 11 /* RX02 flag */
#define RYCS_V_UAE 12 /* addr ext */
#define RYCS_M_UAE 03
#define RYCS_V_INIT 14 /* init */
#define RYCS_V_ERR 15 /* error */
#define RYCS_FUNC (RYCS_M_FUNC << RYCS_V_FUNC)
#define RYCS_DRV (1u << RYCS_V_DRV)
#define RYCS_DONE (1u << RYCS_V_DONE)
#define RYCS_IE (1u << RYCS_V_IE)
#define RYCS_TR (1u << RYCS_V_TR)
#define RYCS_DEN (1u << RYCS_V_DEN)
#define RYCS_RY (1u << RYCS_V_RY)
#define RYCS_UAE (RYCS_M_UAE << RYCS_V_UAE)
#define RYCS_INIT (1u << RYCS_V_INIT)
#define RYCS_ERR (1u << RYCS_V_ERR)
#define RYCS_IMP (RYCS_ERR+RYCS_UAE+RYCS_DEN+RYCS_TR+RYCS_IE+\
RYCS_DONE+RYCS_DRV+RYCS_FUNC)
#define RYCS_RW (RYCS_UAE+RYCS_DEN+RYCS_IE+RYCS_DRV+RYCS_FUNC)
#define RYCS_GETFNC(x) (((x) >> RYCS_V_FUNC) & RYCS_M_FUNC)
#define RYCS_GETUAE(x) (((x) >> RYCS_V_UAE) & RYCS_M_UAE)
#define RYES_CRC 00001 /* CRC error NI */
#define RYES_ID 00004 /* init done */
#define RYES_ACLO 00010 /* ACLO NI */
#define RYES_DERR 00020 /* density err */
#define RYES_DDEN 00040 /* drive density */
#define RYES_DD 00100 /* deleted data */
#define RYES_DRDY 00200 /* drive ready */
#define RYES_USEL 00400 /* unit selected */
#define RYES_WCO 02000 /* wc overflow */
#define RYES_NXM 04000 /* nxm */
#define RYES_ERR (RYES_NXM|RYES_WCO|RYES_DERR|RYES_ACLO|RYES_CRC)
#define TRACK u3 /* current track */
#define CALC_DA(t,s,b) (((t) * RX_NUMSC) + ((s) - 1)) * b
int32 ry_csr = 0; /* control/status */
int32 ry_dbr = 0; /* data buffer */
int32 ry_esr = 0; /* error status */
uint8 ry_ecode = 0; /* error code */
uint8 ry_track = 0; /* desired track */
uint8 ry_sector = 0; /* desired sector */
int32 ry_ba = 0; /* bus addr */
uint8 ry_wc = 0; /* word count */
int32 ry_state = IDLE; /* controller state */
int32 ry_stopioe = 1; /* stop on error */
int32 ry_cwait = 100; /* command time */
int32 ry_swait = 10; /* seek, per track */
int32 ry_xwait = 1; /* tr set time */
uint8 rx2xb[RY_NUMBY] = { 0 }; /* sector buffer */
t_stat ry_rd (int32 *data, int32 PA, int32 access);
t_stat ry_wr (int32 data, int32 PA, int32 access);
t_stat ry_svc (UNIT *uptr);
t_stat ry_reset (DEVICE *dptr);
t_stat ry_boot (int32 unitno, DEVICE *dptr);
void ry_done (int32 esr_flags, uint8 new_ecode);
t_stat ry_set_size (UNIT *uptr, int32 val, CONST char *cptr, void *desc);
t_stat ry_attach (UNIT *uptr, CONST char *cptr);
t_stat ry_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
const char *ry_description (DEVICE *dptr);
/* RY11 data structures
ry_dev RY device descriptor
ry_unit RY unit list
ry_reg RY register list
ry_mod RY modifier list
*/
#define IOLN_RY 004
DIB ry_dib = {
IOBA_AUTO, IOLN_RY, &ry_rd, &ry_wr,
1, IVCL (RY), VEC_AUTO, { NULL }, IOLN_RY,
};
UNIT ry_unit[] = {
{ UDATA (&ry_svc, UNIT_DEN+UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF,
RY_SIZE) },
{ UDATA (&ry_svc, UNIT_DEN+UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF,
RY_SIZE) }
};
REG ry_reg[] = {
{ GRDATAD (RYCS, ry_csr, DEV_RDX, 16, 0, "status") },
{ GRDATAD (RYBA, ry_ba, DEV_RDX, 16, 0, "buffer address") },
{ GRDATAD (RYWC, ry_wc, DEV_RDX, 8, 0, "word count") },
{ GRDATAD (RYDB, ry_dbr, DEV_RDX, 16, 0, "data buffer") },
{ GRDATAD (RYES, ry_esr, DEV_RDX, 12, 0, "error status") },
{ GRDATAD (RYERR, ry_ecode, DEV_RDX, 8, 0, "error code") },
{ GRDATAD (RYTA, ry_track, DEV_RDX, 8, 0, "current track") },
{ GRDATAD (RYSA, ry_sector, DEV_RDX, 8, 0, "current sector") },
{ DRDATAD (STAPTR, ry_state, 4, "controller state"), REG_RO },
{ FLDATAD (INT, IREQ (RY), INT_V_RY, "interrupt pending flag") },
{ FLDATAD (ERR, ry_csr, RYCS_V_ERR, "error flag") },
{ FLDATAD (TR, ry_csr, RYCS_V_TR, "transfer ready flag ") },
{ FLDATAD (IE, ry_csr, RYCS_V_IE, "interrupt enable flag ") },
{ FLDATAD (DONE, ry_csr, RYCS_V_DONE, "device done flag") },
{ DRDATAD (CTIME, ry_cwait, 24, "command completion time"), PV_LEFT },
{ DRDATAD (STIME, ry_swait, 24, "seek time, per track"), PV_LEFT },
{ DRDATAD (XTIME, ry_xwait, 24, "transfer ready delay"), PV_LEFT },
{ BRDATAD (SBUF, rx2xb, 8, 8, RY_NUMBY, "sector buffer array") },
{ FLDATAD (STOP_IOE, ry_stopioe, 0, "stop on I/O error") },
{ URDATA (CAPAC, ry_unit[0].capac, 10, T_ADDR_W, 0,
RX_NUMDR, REG_HRO | PV_LEFT) },
{ GRDATA (DEVADDR, ry_dib.ba, DEV_RDX, 32, 0), REG_HRO },
{ GRDATA (DEVVEC, ry_dib.vec, DEV_RDX, 16, 0), REG_HRO },
{ NULL }
};
MTAB ry_mod[] = {
{ UNIT_WLK, 0, "write enabled", "WRITEENABLED",
NULL, NULL, NULL, "Write enable disk drive" },
{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED",
NULL, NULL, NULL, "Write lock disk drive" },
{ (UNIT_DEN+UNIT_ATT), UNIT_ATT, "single density", NULL, NULL },
{ (UNIT_DEN+UNIT_ATT), (UNIT_DEN+UNIT_ATT), "double density", NULL, NULL },
{ (UNIT_AUTO+UNIT_DEN+UNIT_ATT), 0, "single density", NULL, NULL },
{ (UNIT_AUTO+UNIT_DEN+UNIT_ATT), UNIT_DEN, "double density", NULL, NULL },
{ (UNIT_AUTO+UNIT_ATT), UNIT_AUTO, "autosize", NULL, NULL },
{ UNIT_AUTO, UNIT_AUTO, NULL, "AUTOSIZE",
NULL, NULL, NULL, "set density based on file size at ATTACH" },
{ (UNIT_AUTO+UNIT_DEN), 0, NULL, "SINGLE",
&ry_set_size, NULL, NULL, "Set to Single density (256Kb)" },
{ (UNIT_AUTO+UNIT_DEN), UNIT_DEN, NULL, "DOUBLE",
&ry_set_size, NULL, NULL, "Set to Double density (512Kb)" },
#if defined (VM_PDP11)
{ MTAB_XTD|MTAB_VDV|MTAB_VALR, 004, "ADDRESS", "ADDRESS",
&set_addr, &show_addr, NULL, "Bus Address" },
{ MTAB_XTD | MTAB_VDV, 0, NULL, "AUTOCONFIGURE",
&set_addr_flt, NULL, NULL, "Enable autoconfiguration of address & vector" },
{ MTAB_XTD|MTAB_VDV|MTAB_VALR, 0, "VECTOR", "VECTOR",
&set_vec, &show_vec, NULL, "Interrupt vector" },
#else
{ MTAB_XTD|MTAB_VDV, 004, "ADDRESS", NULL,
NULL, &show_addr, NULL, "Display Bus Address" },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL,
NULL, &show_vec, NULL, "Display Interrupt vector" },
#endif
{ 0 }
};
DEVICE ry_dev = {
"RY", ry_unit, ry_reg, ry_mod,
RX_NUMDR, DEV_RDX, 20, 1, DEV_RDX, 8,
NULL, NULL, &ry_reset,
&ry_boot, &ry_attach, NULL,
&ry_dib, DEV_DISABLE | DEV_DISI | DEV_UBUS | DEV_Q18, 0,
NULL, NULL, NULL, &ry_help, NULL, NULL,
&ry_description
};
/* I/O dispatch routine, I/O addresses 17777170 - 17777172
17777170 floppy CSR
17777172 floppy data register
*/
t_stat ry_rd (int32 *data, int32 PA, int32 access)
{
switch ((PA >> 1) & 1) { /* decode PA<1> */
case 0: /* RYCS */
ry_csr = (ry_csr & RYCS_IMP) | RYCS_RY; /* clear junk */
*data = ry_csr;
break;
case 1: /* RYDB */
*data = ry_dbr; /* return data */
break;
} /* end switch PA */
return SCPE_OK;
}
t_stat ry_wr (int32 data, int32 PA, int32 access)
{
int32 drv;
switch ((PA >> 1) & 1) { /* decode PA<1> */
/* Writing RYCS, three cases:
1. Writing INIT, reset device
2. Idle and writing new function
- clear error, done, transfer ready, int req
- save int enable, function, drive
- start new function
3. Otherwise, write IE and update interrupts
*/
case 0: /* RYCS */
ry_csr = (ry_csr & RYCS_IMP) | RYCS_RY; /* clear junk */
if (access == WRITEB) data = (PA & 1)? /* write byte? */
(ry_csr & 0377) | (data << 8): (ry_csr & ~0377) | data;
if (data & RYCS_INIT) { /* initialize? */
ry_reset (&ry_dev); /* reset device */
return SCPE_OK; /* end if init */
}
if ((data & CSR_GO) && (ry_state == IDLE)) { /* new function? */
ry_csr = (data & RYCS_RW) | RYCS_RY;
drv = ((ry_csr & RYCS_DRV)? 1: 0); /* reselect drv */
switch (RYCS_GETFNC (data)) {
case RYCS_FILL: case RYCS_EMPTY:
ry_state = FEWC; /* state = get wc */
ry_csr = ry_csr | RYCS_TR; /* xfer is ready */
break;
case RYCS_SDEN:
ry_state = SDCNF; /* state = get conf */
ry_csr = ry_csr | RYCS_TR; /* xfer is ready */
break;
case RYCS_ESTAT:
ry_state = ESBA; /* state = get ba */
ry_csr = ry_csr | RYCS_TR; /* xfer is ready */
break;
case RYCS_READ: case RYCS_WRITE: case RYCS_WRDEL:
ry_state = RWDS; /* state = get sector */
ry_csr = ry_csr | RYCS_TR; /* xfer is ready */
ry_esr = ry_esr & RYES_ID; /* clear errors */
ry_ecode = 0;
break;
default:
ry_state = CMD_COMPLETE; /* state = cmd compl */
sim_activate (&ry_unit[drv], ry_cwait);
break;
} /* end switch func */
return SCPE_OK;
} /* end if GO */
if ((data & RYCS_IE) == 0)
CLR_INT (RY);
else if ((ry_csr & (RYCS_DONE + RYCS_IE)) == RYCS_DONE)
SET_INT (RY);
ry_csr = (ry_csr & ~RYCS_RW) | (data & RYCS_RW);
break; /* end case RYCS */
/* Accessing RYDB, two cases:
1. Write idle, write
2. Write not idle and TR set, state dependent
*/
case 1: /* RYDB */
if ((PA & 1) || ((ry_state != IDLE) && ((ry_csr & RYCS_TR) == 0)))
return SCPE_OK; /* if ~IDLE, need tr */
ry_dbr = data; /* save data */
if (ry_state != IDLE) {
drv = ((ry_csr & RYCS_DRV)? 1: 0); /* select drv */
sim_activate (&ry_unit[drv], ry_xwait); /* sched event */
ry_csr = ry_csr & ~RYCS_TR; /* clear xfer */
}
break; /* end case RYDB */
} /* end switch PA */
return SCPE_OK;
}
/* Unit service; the action to be taken depends on the transfer state:
IDLE Should never get here
FEWC Save word count, set TR, set FEBA
FEBA Save bus address, set FEXFR
FEXFR Fill/empty buffer
RWDS Save sector, set TR, set RWDT
RWDT Save track, set RWXFR
RWXFR Read/write buffer
SDCNF Check confirmation, set SDXFR
SDXFR Erase disk
CMD_COMPLETE copy requested data to ir, finish command
INIT_COMPLETE read drive 0, track 1, sector 1 to buffer, finish command
*/
t_stat ry_svc (UNIT *uptr)
{
int32 i, t, func, bps;
static uint8 estat[8];
uint32 ba, da;
int8 *fbuf = (int8 *) uptr->filebuf;
func = RYCS_GETFNC (ry_csr); /* get function */
bps = (ry_csr & RYCS_DEN)? RY_NUMBY: RX_NUMBY; /* get sector size */
ba = (RYCS_GETUAE (ry_csr) << 16) | ry_ba; /* get mem addr */
switch (ry_state) { /* case on state */
case IDLE: /* idle */
return SCPE_IERR;
case FEWC: /* word count */
ry_wc = ry_dbr & 0377; /* save WC */
ry_csr = ry_csr | RYCS_TR; /* set TR */
ry_state = FEBA; /* next state */
return SCPE_OK;
case FEBA: /* buffer address */
ry_ba = ry_dbr; /* save buf addr */
ry_state = FEXFR; /* next state */
sim_activate (uptr, ry_cwait); /* schedule xfer */
return SCPE_OK;
case FEXFR: /* transfer */
if ((ry_wc << 1) > bps) { /* wc too big? */
ry_done (RYES_WCO, 0230); /* error */
break;
}
if (func == RYCS_FILL) { /* fill? read */
for (i = 0; i < RY_NUMBY; i++)
rx2xb[i] = 0;
t = Map_ReadB (ba, ry_wc << 1, rx2xb);
}
else t = Map_WriteB (ba, ry_wc << 1, rx2xb);
ry_wc = (uint8)(t >> 1); /* adjust wc */
ry_done (t? RYES_NXM: 0, 0); /* done */
break;
case RWDS: /* wait for sector */
ry_sector = ry_dbr & RX_M_SECTOR; /* save sector */
ry_csr = ry_csr | RYCS_TR; /* set xfer */
ry_state = RWDT; /* advance state */
return SCPE_OK;
case RWDT: /* wait for track */
ry_track = ry_dbr & RX_M_TRACK; /* save track */
ry_state = RWXFR; /* next state */
sim_activate (uptr, /* sched xfer */
ry_swait * abs (ry_track - uptr->TRACK));
return SCPE_OK;
case RWXFR: /* read/write */
if ((uptr->flags & UNIT_BUF) == 0) { /* not buffered? */
ry_done (0, 0110); /* done, error */
return IORETURN (ry_stopioe, SCPE_UNATT);
}
if (ry_track >= RX_NUMTR) { /* bad track? */
ry_done (0, 0040); /* done, error */
break;
}
uptr->TRACK = ry_track; /* now on track */
if ((ry_sector == 0) || (ry_sector > RX_NUMSC)) { /* bad sect? */
ry_done (0, 0070); /* done, error */
break;
}
if (((uptr->flags & UNIT_DEN) != 0) ^
((ry_csr & RYCS_DEN) != 0)) { /* densities agree? */
ry_done (RYES_DERR, 0240); /* no, error */
break;
}
da = CALC_DA (ry_track, ry_sector, bps); /* get disk address */
if (func == RYCS_WRDEL) /* del data? */
ry_esr = ry_esr | RYES_DD;
if (func == RYCS_READ) { /* read? */
for (i = 0; i < bps; i++)
rx2xb[i] = fbuf[da + i];
}
else {
if (uptr->flags & UNIT_WPRT) { /* write and locked? */
ry_done (0, 0100); /* done, error */
break;
}
for (i = 0; i < bps; i++) /* write */
fbuf[da + i] = rx2xb[i];
da = da + bps;
if (da > uptr->hwmark)
uptr->hwmark = da;
}
ry_done (0, 0); /* done */
break;
case SDCNF: /* confirm set density */
if ((ry_dbr & 0377) != 0111) { /* confirmed? */
ry_done (0, 0250); /* no, error */
break;
}
ry_state = SDXFR; /* next state */
sim_activate (uptr, ry_cwait * 100); /* schedule operation */
break;
case SDXFR: /* erase disk */
for (i = 0; i < (int32) uptr->capac; i++)
fbuf[i] = 0;
uptr->hwmark = (uint32) uptr->capac;
if (ry_csr & RYCS_DEN)
uptr->flags = uptr->flags | UNIT_DEN;
else uptr->flags = uptr->flags & ~UNIT_DEN;
ry_done (0, 0);
break;
case ESBA:
ry_ba = ry_dbr; /* save WC */
ry_state = ESXFR; /* next state */
sim_activate (uptr, ry_cwait); /* schedule xfer */
return SCPE_OK;
case ESXFR:
estat[0] = ry_ecode; /* fill 8B status */
estat[1] = ry_wc;
estat[2] = (uint8)ry_unit[0].TRACK;
estat[3] = (uint8)ry_unit[1].TRACK;
estat[4] = ry_track;
estat[5] = ry_sector;
estat[6] = ((ry_csr & RYCS_DRV)? 0200: 0) |
((ry_unit[1].flags & UNIT_DEN)? 0100: 0) |
((uptr->flags & UNIT_ATT)? 0040: 0) |
((ry_unit[0].flags & UNIT_DEN)? 0020: 0) |
((ry_csr & RYCS_DEN)? 0001: 0);
estat[7] = (uint8)uptr->TRACK;
t = Map_WriteB (ba, 8, estat); /* DMA to memory */
ry_done (t? RYES_NXM: 0, 0); /* done */
break;
case CMD_COMPLETE: /* command complete */
ry_done (0, 0);
break;
case INIT_COMPLETE: /* init complete */
ry_unit[0].TRACK = 1; /* drive 0 to trk 1 */
ry_unit[1].TRACK = 0; /* drive 1 to trk 0 */
if ((uptr->flags & UNIT_BUF) == 0) { /* not buffered? */
ry_done (RYES_ID, 0010); /* init done, error */
break;
}
da = CALC_DA (1, 1, bps); /* track 1, sector 1 */
for (i = 0; i < bps; i++) /* read sector */
rx2xb[i] = fbuf[da + i];
ry_done (RYES_ID, 0); /* set done */
if ((ry_unit[1].flags & UNIT_ATT) == 0)
ry_ecode = 0020;
break;
} /* end case state */
return SCPE_OK;
}
/* Command complete. Set done and put final value in interface register,
request interrupt if needed, return to IDLE state.
*/
void ry_done (int32 esr_flags, uint8 new_ecode)
{
int32 drv = (ry_csr & RYCS_DRV)? 1: 0;
ry_state = IDLE; /* now idle */
ry_csr = ry_csr | RYCS_DONE; /* set done */
if (ry_csr & CSR_IE) /* if ie, intr */
SET_INT (RY);
ry_esr = (ry_esr | esr_flags) & ~(RYES_USEL|RYES_DDEN|RYES_DRDY);
if (drv) /* updates RYES */
ry_esr = ry_esr | RYES_USEL;
if (ry_unit[drv].flags & UNIT_ATT) {
ry_esr = ry_esr | RYES_DRDY;
if (ry_unit[drv].flags & UNIT_DEN)
ry_esr = ry_esr | RYES_DDEN;
}
if ((new_ecode > 0) || (ry_esr & RYES_ERR)) /* test for error */
ry_csr = ry_csr | RYCS_ERR;
ry_ecode = new_ecode; /* update ecode */
ry_dbr = ry_esr; /* update RYDB */
return;
}
/* Device initialization. The RY is one of the few devices that schedules
an I/O transfer as part of its initialization.
*/
t_stat ry_reset (DEVICE *dptr)
{
ry_csr = ry_dbr = 0; /* clear registers */
ry_esr = ry_ecode = 0; /* clear error */
ry_ba = ry_wc = 0; /* clear wc, ba */
ry_track = ry_sector = 0; /* clear trk, sector */
ry_state = IDLE; /* ctrl idle */
CLR_INT (RY); /* clear int req */
sim_cancel (&ry_unit[1]); /* cancel drive 1 */
if (dptr->flags & UNIT_DIS) /* disabled? */
sim_cancel (&ry_unit[0]);
else if (ry_unit[0].flags & UNIT_BUF) { /* attached? */
ry_state = INIT_COMPLETE; /* yes, sched init */
sim_activate (&ry_unit[0], ry_swait * abs (1 - ry_unit[0].TRACK));
}
else ry_done (RYES_ID, 0010); /* no, error */
return auto_config (dptr->name, 1); /* run autoconfig */
}
/* Attach routine */
t_stat ry_attach (UNIT *uptr, CONST char *cptr)
{
uint32 sz;
if ((uptr->flags & UNIT_AUTO) && (sz = sim_fsize_name (cptr))) {
if (sz > RX_SIZE)
uptr->flags = uptr->flags | UNIT_DEN;
else uptr->flags = uptr->flags & ~UNIT_DEN;
}
uptr->capac = (uptr->flags & UNIT_DEN)? RY_SIZE: RX_SIZE;
return attach_unit (uptr, cptr);
}
/* Set size routine */
t_stat ry_set_size (UNIT *uptr, int32 val, CONST char *cptr, void *desc)
{
if (uptr->flags & UNIT_ATT)
return SCPE_ALATT;
uptr->capac = val? RY_SIZE: RX_SIZE;
return SCPE_OK;
}
/* Device bootstrap */
#if defined (VM_PDP11)
#define BOOT_START 02000 /* start */
#define BOOT_ENTRY (BOOT_START + 002) /* entry */
#define BOOT_UNIT (BOOT_START + 010) /* unit number */
#define BOOT_CSR (BOOT_START + 026) /* CSR */
#define BOOT_LEN (sizeof (boot_rom) / sizeof (int16))
static const uint16 boot_rom[] = {
042131, /* "YD" */
0012706, BOOT_START, /* MOV #boot_start, SP */
0012700, 0000000, /* MOV #unit, R0 ; unit number */
0010003, /* MOV R0, R3 */
0006303, /* ASL R3 */
0006303, /* ASL R3 */
0006303, /* ASL R3 */
0006303, /* ASL R3 */
0012701, 0177170, /* MOV #RYCS, R1 ; csr */
0005002, /* CLR R2 ; ba */
0005004, /* CLR R4 ; density */
0012705, 0000001, /* MOV #1, R5 ; sector */
0005104, /* DN: COM R4 ; compl dens */
0042704, 0177377, /* BIC #177377, R4 ; clr rest */
0032711, 0000040, /* RD: BIT #40, (R1) ; ready? */
0001775, /* BEQ .-4 */
0012746, 0000007, /* MOV #READ+GO, -(SP) */
0050316, /* BIS R3, (SP) ; or unit */
0050416, /* BIS R4, (SP) ; or density */
0012611, /* MOV (SP)+, (R1) ; read & go */
0105711, /* TSTB (R1) ; xfr ready? */
0100376, /* BPL .-2 */
0010561, 0000002, /* MOV R5, 2(R1) ; sector */
0105711, /* TSTB (R1) ; xfr ready? */
0100376, /* BPL .-2 */
0012761, 0000001, 0000002, /* MOV #1, 2(R1) ; track */
0032711, 0000040, /* BIT #40, (R1) ; ready? */
0001775, /* BEQ .-4 */
0005711, /* TST (R1) ; error? */
0100003, /* BEQ OK */
0005704, /* TST R4 ; single? */
0001345, /* BNE DN ; no, try again */
0000000, /* HALT ; dead */
0012746, 0000003, /* OK: MOV #EMPTY+GO, -(SP); empty & go */
0050416, /* BIS R4, (SP) ; or density */
0012611, /* MOV (SP)+, (R1) ; read & go */
0105711, /* TSTB (R1) ; xfr, done? */
0001776, /* BPL .-2 */
0012746, 0000100, /* MOV #100, -(SP) ; assume sd */
0005704, /* TST R4 ; test dd */
0001401, /* BEQ .+4 */
0006316, /* ASL (SP) ; dd, double */
0011661, 0000002, /* MOV (SP), 2(R1) ; wc */
0105711, /* TSTB (R1) ; xfr, done? */
0001776, /* BPL .-2 */
0010261, 0000002, /* MOV R2, 2(R1) ; ba */
0032711, 0000040, /* BIT #40, (R1) ; ready? */
0001775, /* BEQ .-4 */
0061602, /* ADD (SP), R2 ; cvt wd to byte */
0062602, /* ADD (SP)+, R2 ; adv buf addr */
0122525, /* CMPB (R5)+, (R5)+ ; sect += 2 */
0020527, 0000007, /* CMP R5, #7 ; end? */
0101715, /* BLOS RD ; read next */
0005002, /* CLR R2 */
0005003, /* CLR R3 */
0012704, BOOT_START+020, /* MOV #START+20, R4 */
0005005, /* CLR R5 */
0005007 /* CLR R7 */
};
t_stat ry_boot (int32 unitno, DEVICE *dptr)
{
size_t i;
if ((ry_unit[unitno & RX_M_NUMDR].flags & UNIT_DEN) == 0)
return SCPE_NOFNC;
for (i = 0; i < BOOT_LEN; i++)
M[(BOOT_START >> 1) + i] = boot_rom[i];
M[BOOT_UNIT >> 1] = unitno & RX_M_NUMDR;
M[BOOT_CSR >> 1] = ry_dib.ba & DMASK;
cpu_set_boot (BOOT_ENTRY);
return SCPE_OK;
}
#else
t_stat ry_boot (int32 unitno, DEVICE *dptr)
{
return SCPE_NOFNC;
}
#endif
t_stat ry_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr)
{
fprintf (st, "RX211/RX02 Floppy Disk\n\n");
fprintf (st, "RX211 options include the ability to set units write enabled or write locked,\n");
fprintf (st, "single or double density, or autosized:\n\n");
fprint_set_help (st, dptr);
fprint_show_help (st, dptr);
fprintf (st, "\n");
#if defined (VM_PDP11)
fprintf (st, "The RX211 supports the BOOT command.\n\n");
#endif
fprintf (st, "The RX211 is disabled in a Qbus system with more than 256KB of memory.\n\n");
fprint_reg_help (st, dptr);
fprintf (st, "\nError handling is as follows:\n\n");
fprintf (st, " error STOP_IOE processed as\n");
fprintf (st, " not attached 1 report error and stop\n");
fprintf (st, " 0 disk not ready\n\n");
fprintf (st, "RX02 data files are buffered in memory; therefore, end of file and OS I/O\n");
fprintf (st, "errors cannot occur.\n");
return SCPE_OK;
}
const char *ry_description (DEVICE *dptr)
{
return (UNIBUS) ? "RX211 floppy disk controller" :
"RXV21 floppy disk controller";
}