/* i8251.c: Intel i8251 UART adapter Copyright (c) 2010, William A. Beech Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL WILLIAM A. BEECH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of William A. Beech shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from William A. Beech. MODIFICATIONS: ?? ??? 10 - Original file. 16 Dec 12 - Modified to use isbc_80_10.cfg file to set baseport and size. 24 Apr 15 -- Modified to use simh_debug NOTES: These functions support a simulated i8251 interface device on an iSBC. The device had one physical I/O port which could be connected to any serial I/O device that would connect to a current loop, RS232, or TTY interface. Available baud rates were jumper selectable for each port from 110 to 9600. All I/O is via programmed I/O. The i8251 has a status port and a data port. The simulated device does not support synchronous mode. The simulated device supports a select from I/O space and one address line. The data port is at the lower address and the status/command port is at the higher. A write to the status port can select some options for the device: Asynchronous Mode Instruction 7 6 5 4 3 2 1 0 +---+---+---+---+---+---+---+---+ | S2 S1 EP PEN L2 L1 B2 B1| +---+---+---+---+---+---+---+---+ Baud Rate Factor B2 0 1 0 1 B1 0 0 1 1 sync 1X 16X 64X mode Character Length L2 0 1 0 1 L1 0 0 1 1 5 6 7 8 bits bits bits bits EP - A 1 in this bit position selects even parity. PEN - A 1 in this bit position enables parity. Number of Stop Bits S2 0 1 0 1 S1 0 0 1 1 invalid 1 1.5 2 bit bits bits Command Instruction Format 7 6 5 4 3 2 1 0 +---+---+---+---+---+---+---+---+ | EH IR RTS ER SBRK RxE DTR TxE| +---+---+---+---+---+---+---+---+ TxE - A 1 in this bit position enables transmit. DTR - A 1 in this bit position forces *DTR to zero. RxE - A 1 in this bit position enables receive. SBRK - A 1 in this bit position forces TxD to zero. ER - A 1 in this bit position resets the error bits RTS - A 1 in this bit position forces *RTS to zero. IR - A 1 in this bit position returns the 8251 to Mode Instruction Format. EH - A 1 in this bit position enables search for sync characters. A read of the status port gets the port status: Status Read Format 7 6 5 4 3 2 1 0 +---+---+---+---+---+---+---+---+ |DSR SD FE OE PE TxE RxR TxR| +---+---+---+---+---+---+---+---+ TxR - A 1 in this bit position signals transmit ready to receive a character. RxR - A 1 in this bit position signals receiver has a character. TxE - A 1 in this bit position signals transmitter has no more characters to transmit. PE - A 1 in this bit signals a parity error. OE - A 1 in this bit signals an transmit overrun error. FE - A 1 in this bit signals a framing error. SD - A 1 in this bit position returns the 8251 to Mode Instruction Format. DSR - A 1 in this bit position signals *DSR is at zero. A read from the data port gets the typed character, a write to the data port writes the character to the device. */ #include "system_defs.h" #define DEBUG 0 /* external globals */ extern uint16 port; //port called in dev_table[port] #define UNIT_V_ANSI (UNIT_V_UF + 0) /* ANSI mode */ #define UNIT_ANSI (1 << UNIT_V_ANSI) #define TXR 0x01 #define RXR 0x02 #define TXE 0x04 #define SD 0x40 /* external function prototypes */ extern uint16 reg_dev(uint8 (*routine)(t_bool, uint8), uint16, uint8); /* globals */ int32 i8251_devnum = 0; //actual number of 8251 instances + 1 uint16 i8251_port[4]; //baseport port registered to each instance /* function prototypes */ t_stat i8251_svc (UNIT *uptr); t_stat i8251_reset (DEVICE *dptr, uint16 baseport); uint8 i8251_get_dn(void); uint8 i8251s(t_bool io, uint8 data); uint8 i8251d(t_bool io, uint8 data); void i8251_reset1(uint8 devnum); /* i8251 Standard I/O Data Structures */ /* up to 1 i8251 devices */ UNIT i8251_unit = { UDATA (&i8251_svc, 0, 0), KBD_POLL_WAIT }; REG i8251_reg[] = { { HRDATA (DATA, i8251_unit.buf, 8) }, { HRDATA (STAT, i8251_unit.u3, 8) }, { HRDATA (MODE, i8251_unit.u4, 8) }, { HRDATA (CMD, i8251_unit.u5, 8) }, { NULL } }; DEBTAB i8251_debug[] = { { "ALL", DEBUG_all }, { "FLOW", DEBUG_flow }, { "READ", DEBUG_read }, { "WRITE", DEBUG_write }, { "XACK", DEBUG_xack }, { "LEV1", DEBUG_level1 }, { "LEV2", DEBUG_level2 }, { NULL } }; MTAB i8251_mod[] = { { UNIT_ANSI, 0, "TTY", "TTY", NULL }, { UNIT_ANSI, UNIT_ANSI, "ANSI", "ANSI", NULL }, { 0 } }; /* address width is set to 16 bits to use devices in 8086/8088 implementations */ DEVICE i8251_dev = { "I8251", //name &i8251_unit, //units i8251_reg, //registers i8251_mod, //modifiers 1, //numunits 16, //aradix 16, //awidth 1, //aincr 16, //dradix 8, //dwidth NULL, //examine NULL, //deposit // &i8251_reset, //reset NULL, //reset NULL, //boot NULL, //attach NULL, //detach NULL, //ctxt 0, //flags 0, //dctrl i8251_debug, //debflags NULL, //msize NULL //lname }; /* Service routines to handle simulator functions */ /* i8251_svc - actually gets char & places in buffer */ t_stat i8251_svc (UNIT *uptr) { int32 temp; sim_activate (&i8251_unit, i8251_unit.wait); /* continue poll */ if ((temp = sim_poll_kbd ()) < SCPE_KFLAG) return temp; /* no char or error? */ i8251_unit.buf = temp & 0xFF; /* Save char */ i8251_unit.u3 |= RXR; /* Set status */ /* Do any special character handling here */ i8251_unit.pos++; return SCPE_OK; } /* Reset routine */ t_stat i8251_reset (DEVICE *dptr, uint16 baseport) { if (i8251_devnum >= I8251_NUM) { sim_printf("i8251_reset: too many devices!\n"); return SCPE_MEM; } sim_printf(" 8251-%d: Hardware Reset\n", i8251_devnum); sim_printf(" 8251-%d: Registered at %04X\n", i8251_devnum, baseport); i8251_port[i8251_devnum] = baseport; reg_dev(i8251d, baseport, i8251_devnum); reg_dev(i8251s, baseport + 1, i8251_devnum); i8251_reset1(i8251_devnum); sim_activate (&i8251_unit, i8251_unit.wait); /* activate unit */ i8251_devnum++; return SCPE_OK; } void i8251_reset1(uint8 devnum) { i8251_unit.u3 = TXR + TXE; /* status */ i8251_unit.u4 = 0; /* mode instruction */ i8251_unit.u5 = 0; /* command instruction */ i8251_unit.u6 = 0; i8251_unit.buf = 0; i8251_unit.pos = 0; sim_printf(" 8251-%d: Software Reset\n", devnum); } uint8 i8251_get_dn(void) { int i; for (i=0; i= i8251_port[i] && port <= i8251_port[i] + 1) return i; sim_printf("i8251_get_dn: port %04X not in 8251 device table\n", port); return 0xFF; } /* I/O instruction handlers, called from the CPU module when an IN or OUT instruction is issued. */ uint8 i8251s(t_bool io, uint8 data) { uint8 devnum; if ((devnum = i8251_get_dn()) != 0xFF) { // sim_printf("\nio=%d data=%04X\n", io, data); if (io == 0) { /* read status port */ return i8251_unit.u3; } else { /* write status port */ if (i8251_unit.u6) { /* if mode, set cmd */ i8251_unit.u5 = data; if (DEBUG) sim_printf(" 8251-%d: Command Instruction=%02X\n", devnum, data); if (data & SD) /* reset port! */ i8251_reset1(devnum); } else { /* set mode */ i8251_unit.u4 = data; if (DEBUG) sim_printf(" 8251-%d: Mode Instruction=%02X\n", devnum, data); i8251_unit.u6 = 1; /* set cmd received */ } } } return 0; } uint8 i8251d(t_bool io, uint8 data) { uint8 devnum; if ((devnum = i8251_get_dn()) != 0xFF) { if (io == 0) { /* read data port */ i8251_unit.u3 &= ~RXR; return (i8251_unit.buf); } else { /* write data port */ sim_putchar(data); } } return 0; } /* end of i8251.c */