/*  i8255.c: Intel i8255 PIO adapter

    Copyright (c) 2010, William A. Beech

        Permission is hereby granted, free of charge, to any person obtaining a
        copy of this software and associated documentation files (the "Software"),
        to deal in the Software without restriction, including without limitation
        the rights to use, copy, modify, merge, publish, distribute, sublicense,
        and/or sell copies of the Software, and to permit persons to whom the
        Software is furnished to do so, subject to the following conditions:

        The above copyright notice and this permission notice shall be included in
        all copies or substantial portions of the Software.

        THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
        IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
        FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
        WILLIAM A. BEECH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
        IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
        CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

        Except as contained in this notice, the name of William A. Beech shall not be
        used in advertising or otherwise to promote the sale, use or other dealings
        in this Software without prior written authorization from William A. Beech.

    MODIFICATIONS:

        ?? ??? 10 - Original file.
        16 Dec 12 - Modified to use isbc_80_10.cfg file to set i8255_baseport and size.
        24 Apr 15 -- Modified to use simh_debug

    NOTES:

        These functions support a simulated i8255 interface device on an iSBC.
        The device has threee physical 8-bit I/O ports which could be connected
        to any parallel I/O device.

        All I/O is via programmed I/O.  The i8255 has a control port (i8255s)
        and three data ports (i8255a, i8255b, and i8255c).    

        The simulated device supports a select from I/O space and two address lines. 
        The data ports are at the lower addresses and the control port is at
        the highest.
        
        A write to the control port can configure the device:

        Control Word
        +---+---+---+---+---+---+---+---+
        | D7  D6  D5  D4  D3  D2  D1  D0|
        +---+---+---+---+---+---+---+---+

            Group B
            D0  Port C (lower) 1-Input, 0-Output
            D1  Port B 1-Input, 0-Output
            D2  Mode Selection  0-Mode 0, 1-Mode 1
                                
            Group A
            D3  Port C (upper) 1-Input, 0-Output
            D4  Port A 1-Input, 0-Output
            D5-6  Mode Selection  00-Mode 0, 01-Mode 1, 1X-Mode 2

            D7  Mode Set Flag 1=Active, 0=Bit Set

            Mode 0 - Basic Input/Output
            Mode 1 - Strobed Input/Output
            Mode 2 - Bidirectional Bus

            Bit Set - D7=0, D3:1 select port C bit, D0 1=set, 0=reset

        A read to the data ports gets the current port value, a write
        to the data ports writes the character to the device.  

        This program simulates up to 4 i8255 devices.  It handles 2 i8255 
        devices on the iSBC 80/10 SBC.  Other devices could be on other 
        multibus boards in the simulated system.
*/

#include "system_defs.h"                /* system header in system dir */

#define i8255_NAME    "Intel i8255 PIA Chip"

/* internal function prototypes */

t_stat i8255_cfg(uint16 base, uint16 devnum, uint8 dummy);
t_stat i8255_clr(void);
t_stat i8255_show_param (FILE *st, UNIT *uptr, int32 val, CONST void *desc);
t_stat i8255_reset (DEVICE *dptr);
t_stat i8255_reset_dev ();
uint8 i8255a(t_bool io, uint8 data, uint8 devnum);
uint8 i8255b(t_bool io, uint8 data, uint8 devnum);
uint8 i8255c(t_bool io, uint8 data, uint8 devnum);
uint8 i8255s(t_bool io, uint8 data, uint8 devnum);

/* external function prototypes */

extern uint8 reg_dev(uint8 (*routine)(t_bool, uint8, uint8), uint16, uint16, uint8);
extern uint8 unreg_dev(uint16);

/* globals */

static const char* i8255_desc(DEVICE *dptr) {
    return i8255_NAME;
}
int     i8255_num = 0;
int     i8255_baseport[] = { -1, -1, -1, -1 }; //base port
uint8   i8255_intnum[4] = { 0, 0, 0, 0 }; //interrupt number
uint8   i8255_verb[4] = { 0, 0, 0, 0 }; //verbose flag

/* these bytes represent the input and output to/from a port instance */

uint8 i8255_A[4];               //port A byte I/O
uint8 i8255_B[4];               //port B byte I/O
uint8 i8255_C[4];               //port C byte I/O

/* external globals */

/* i8255 Standard I/O Data Structures */
/* up to 4 i8255 devices */

UNIT i8255_unit[] = {
    { UDATA (0, 0, 0) },                /* i8255 0 */
    { UDATA (0, 0, 0) },                /* i8255 1 */
    { UDATA (0, 0, 0) },                /* i8255 2 */
    { UDATA (0, 0, 0) }                 /* i8255 3 */ 
};

REG i8255_reg[] = {
    { HRDATA (CS0, i8255_unit[0].u3, 8) }, /* i8255 0 */
    { HRDATA (A0, i8255_A[0], 8) },
    { HRDATA (B0, i8255_B[0], 8) },
    { HRDATA (C0, i8255_C[0], 8) },
    { HRDATA (CS1, i8255_unit[1].u3, 8) }, /* i8255 1 */
    { HRDATA (A1, i8255_A[1], 8) },
    { HRDATA (B1, i8255_B[1], 8) },
    { HRDATA (C1, i8255_C[1], 8) },
    { HRDATA (CS2, i8255_unit[2].u3, 8) }, /* i8255 2 */
    { HRDATA (A2, i8255_A[2], 8) },
    { HRDATA (B2, i8255_B[2], 8) },
    { HRDATA (C2, i8255_C[2], 8) },
    { HRDATA (CS3, i8255_unit[3].u3, 8) }, /* i8255 3 */
    { HRDATA (A3, i8255_A[3], 8) },
    { HRDATA (B3, i8255_B[3], 8) },
    { HRDATA (C3, i8255_C[3], 8) },
    { NULL }
};

MTAB i8255_mod[] = {
//    { MTAB_XTD | MTAB_VDV, 0, NULL, "VERB", &isbc202_set_verb,
//        NULL, NULL, "Sets the verbose mode for i8255"},
//    { MTAB_XTD | MTAB_VDV, 0, NULL, "PORT", &isbc202_set_port,
//        NULL, NULL, "Sets the base port for i8255"},
//    { MTAB_XTD | MTAB_VDV, 0, NULL, "INT", &isbc202_set_int,
//        NULL, NULL, "Sets the interrupt number for i8255"},
    { MTAB_XTD | MTAB_VDV, 0, "PARAM", NULL, NULL, i8255_show_param, NULL, 
        "show configured parametes for i8255" },
    { 0 }
};

DEBTAB i8255_debug[] = {
    { "ALL", DEBUG_all },
    { "FLOW", DEBUG_flow },
    { "READ", DEBUG_read },
    { "WRITE", DEBUG_write },
    { "LEV1", DEBUG_level1 },
    { "LEV2", DEBUG_level2 },
    { NULL }
};

/* address width is set to 16 bits to use devices in 8086/8088 implementations */

DEVICE i8255_dev = {
    "I8255",            //name
    i8255_unit,         //units
    i8255_reg,          //registers
    i8255_mod,          //modifiers
    I8255_NUM,          //numunits 
    16,                 //aradix
    16,                 //awidth
    1,                  //aincr
    16,                 //dradix
    8,                  //dwidth
    NULL,               //examine
    NULL,               //deposit
    i8255_reset,        //reset
    NULL,               //boot
    NULL,               //attach
    NULL,               //detach
    NULL,               //ctxt
    DEV_DEBUG+DEV_DISABLE+DEV_DIS, //flags 
    0,                  //dctrl
    i8255_debug,        //debflags
    NULL,               //msize
    NULL,               //lname
    NULL,               //help routine
    NULL,               //attach help routine
    NULL,               //help context
    &i8255_desc         //device description
};

// i8255 configuration

t_stat i8255_cfg(uint16 base, uint16 devnum, uint8 dummy)
{
    DEVICE *dptr;
    
    dptr = find_dev (i8255_dev.name);
    i8255_baseport[devnum] = base & 0xff;
    sim_printf("    i8255%d: installed at base port 0%02XH\n",
        devnum, i8255_baseport[devnum]);
    reg_dev(i8255a, i8255_baseport[devnum], devnum, 0); 
    reg_dev(i8255b, i8255_baseport[devnum] + 1, devnum, 0); 
    reg_dev(i8255c, i8255_baseport[devnum] + 2, devnum, 0); 
    reg_dev(i8255s, i8255_baseport[devnum] + 3, devnum, 0);
    i8255_num++;
    return SCPE_OK;
}

t_stat i8255_clr(void)
{
    int i;
    
    for (i=0; i<i8255_num; i++) {
        unreg_dev(i8255_baseport[i]); 
        unreg_dev(i8255_baseport[i] + 1); 
        unreg_dev(i8255_baseport[i] + 2); 
        unreg_dev(i8255_baseport[i] + 3);
        i8255_baseport[i] = -1;
        i8255_intnum[i] = 0;
        i8255_verb[i] = 0;
    }
    i8255_num = 0; 
    return SCPE_OK;
}

// show configuration parameters

t_stat i8255_show_param (FILE *st, UNIT *uptr, int32 val, CONST void *desc)
{
    int i;
    
    if (uptr == NULL)
        return SCPE_ARG;
    fprintf(st, "Device %s\n", ((i8255_dev.flags & DEV_DIS) == 0) ? "Enabled" : "Disabled");
    for (i=0; i<i8255_num; i++) {
        fprintf(st, "Unit %d at Base port ", i);
        fprintf(st, "0%02X ", i8255_baseport[i]);
        fprintf(st, "Interrupt # is ");
        fprintf(st, "%d ", i8255_intnum[i]);
        fprintf(st, "Mode ");
        fprintf(st, "%s", i8255_verb[i] ? "Verbose" : "Quiet");
        if (i<i8255_num && i8255_num != 1) fprintf(st, "\n");
    }
    return SCPE_OK;
}

/* Reset routine */

t_stat i8255_reset (DEVICE *dptr)
{
//    if ((dptr->flags & DEV_DIS) == 0) { // enabled
        i8255_reset_dev();              //software reset
//    }
    return SCPE_OK;
}

t_stat i8255_reset_dev ()
{
    uint8 devnum;
    
    for (devnum = 0; devnum < i8255_num+1; devnum++) {
        i8255_unit[devnum].u3 = 0x9B; /* control */
        i8255_A[devnum] = 0xFF; /* Port A */
        i8255_B[devnum] = 0xFF; /* Port B */
        i8255_C[devnum] = 0xFF; /* Port C */
    }
    return SCPE_OK;
}

/*  I/O instruction handlers, called from the CPU module when an
    IN or OUT instruction is issued.
*/

/* i8255 functions */

uint8 i8255s(t_bool io, uint8 data, uint8 devnum)
{
    uint8 bit;
    
    if (io == 0) {                      /* read status port */
        return 0xFF;                    //undefined
    } else {                            /* write status port */
        if (data & 0x80) {              /* mode instruction */
            i8255_unit[devnum].u3 = data;
            if (data & 0x64)
                sim_printf("   Mode 1 and 2 not yet implemented\n");
        } else {                        /* bit set */
            bit = (data & 0x0E) >> 1;   /* get bit number */
            if (data & 0x01) {          /* set bit */
                i8255_C[devnum] |= (0x01 << bit);
            } else {                    /* reset bit */
                i8255_C[devnum] &= ~(0x01 << bit);
            }
        }
    }
    return 0;
}

uint8 i8255a(t_bool io, uint8 data, uint8 devnum)
{
    if (io == 0) {                      /* read data port */
        return (i8255_A[devnum]);
    } else {                            /* write data port */
        i8255_A[devnum] = data;
    }
    return 0;
}

uint8 i8255b(t_bool io, uint8 data, uint8 devnum)
{
    if (io == 0) {                      /* read data port */
        return (i8255_B[devnum]);
    } else {                            /* write data port */
        i8255_B[devnum] = data;
    }
    return 0;
}

uint8 i8255c(t_bool io, uint8 data, uint8 devnum)
{
    if (io == 0) {                      /* read data port */
        return (i8255_C[devnum]);
    } else {                            /* write data port */
        if (devnum == 0) {
            if((i8255_C[devnum] & 0x80) != (data & 0x80)) { //change in ROM enable
                if (data & 0x80) 
                    sim_printf("Onboard EPROM: Enabled\n");
                else
                    sim_printf("Onboard EPROM: Disabled\n");
            }
            if((i8255_C[devnum] & 0x20) != (data & 0x20)) { //change in RAM enable
                if (data & 0x20) 
                    sim_printf("Onboard RAM: Enabled\n");
                else
                    sim_printf("Onboard RAM: Disabled\n");
            }
        }
        i8255_C[devnum] = data;
    }
    return 0;
}

/* end of i8255.c */