/* pdp11_pt.c: PC11 paper tape reader/punch simulator
Copyright (c) 1993-2008, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
ptr paper tape reader
ptp paper tape punch
07-Jul-05 RMS Removed extraneous externs
19-May-03 RMS Revised for new conditional compilation scheme
25-Apr-03 RMS Revised for extended file support
12-Sep-02 RMS Split off from pdp11_stddev.c
*/
#if defined (VM_PDP10) /* PDP10 version */
#include "pdp10_defs.h"
#define PT_DIS DEV_DIS
#elif defined (VM_VAX) /* VAX version */
#include "vax_defs.h"
#define PT_DIS DEV_DIS
#else /* PDP-11 version */
#include "pdp11_defs.h"
#define PT_DIS 0
#endif
#define PTRCSR_IMP (CSR_ERR+CSR_BUSY+CSR_DONE+CSR_IE) /* paper tape reader */
#define PTRCSR_RW (CSR_IE)
#define PTPCSR_IMP (CSR_ERR + CSR_DONE + CSR_IE) /* paper tape punch */
#define PTPCSR_RW (CSR_IE)
int32 ptr_csr = 0; /* control/status */
int32 ptr_stopioe = 0; /* stop on error */
int32 ptp_csr = 0; /* control/status */
int32 ptp_stopioe = 0; /* stop on error */
t_stat ptr_rd (int32 *data, int32 PA, int32 access);
t_stat ptr_wr (int32 data, int32 PA, int32 access);
t_stat ptr_svc (UNIT *uptr);
t_stat ptr_reset (DEVICE *dptr);
t_stat ptr_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
const char *ptr_description (DEVICE *dptr);
t_stat ptr_attach (UNIT *uptr, CONST char *ptr);
t_stat ptr_detach (UNIT *uptr);
t_stat ptp_rd (int32 *data, int32 PA, int32 access);
t_stat ptp_wr (int32 data, int32 PA, int32 access);
t_stat ptp_svc (UNIT *uptr);
t_stat ptp_reset (DEVICE *dptr);
t_stat ptp_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
const char *ptp_description (DEVICE *dptr);
t_stat ptp_attach (UNIT *uptr, CONST char *ptr);
t_stat ptp_detach (UNIT *uptr);
/* PTR data structures
ptr_dev PTR device descriptor
ptr_unit PTR unit descriptor
ptr_reg PTR register list
*/
#define IOLN_PTR 004
DIB ptr_dib = {
IOBA_AUTO, IOLN_PTR, &ptr_rd, &ptr_wr,
1, IVCL (PTR), VEC_AUTO, { NULL }
};
UNIT ptr_unit = {
UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0),
SERIAL_IN_WAIT
};
extern DEVICE ptr_dev;
REG ptr_reg[] = {
{ GRDATAD (BUF, ptr_unit.buf, DEV_RDX, 8, 0, "last data item processed") },
{ GRDATAD (CSR, ptr_csr, DEV_RDX, 16, 0, "control/status register") },
{ FLDATAD (INT, IREQ (PTR), INT_V_PTR, "interrupt pending flag") },
{ FLDATAD (ERR, ptr_csr, CSR_V_ERR, "error flag (CSR<15>)") },
{ FLDATAD (BUSY, ptr_csr, CSR_V_BUSY, "busy flag (CSR<11>)") },
{ FLDATAD (DONE, ptr_csr, CSR_V_DONE, "device done flag (CSR<7>)") },
{ FLDATAD (IE, ptr_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") },
{ DRDATAD (POS, ptr_unit.pos, T_ADDR_W, "position in the input file"), PV_LEFT },
{ DRDATAD (TIME, ptr_unit.wait, 24, "time from I/O initiation to interrupt"), PV_LEFT },
{ FLDATAD (STOP_IOE, ptr_stopioe, 0, "stop on I/O error") },
{ FLDATA (DEVDIS, ptr_dev.flags, DEV_V_DIS), REG_HRO },
{ GRDATA (DEVADDR, ptr_dib.ba, DEV_RDX, 32, 0), REG_HRO },
{ GRDATA (DEVVEC, ptr_dib.vec, DEV_RDX, 16, 0), REG_HRO },
{ NULL }
};
MTAB ptr_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL,
NULL, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL,
NULL, &show_vec, NULL },
{ 0 }
};
DEVICE ptr_dev = {
"PTR", &ptr_unit, ptr_reg, ptr_mod,
1, 10, 31, 1, DEV_RDX, 8,
NULL, NULL, &ptr_reset,
NULL, &ptr_attach, &ptr_detach,
&ptr_dib, DEV_DISABLE | PT_DIS | DEV_UBUS | DEV_QBUS, 0,
NULL, NULL, NULL, &ptr_help, NULL, NULL,
&ptr_description
};
/* PTP data structures
ptp_dev PTP device descriptor
ptp_unit PTP unit descriptor
ptp_reg PTP register list
*/
#define IOLN_PTP 004
DIB ptp_dib = {
IOBA_AUTO, IOLN_PTP, &ptp_rd, &ptp_wr,
1, IVCL (PTP), VEC_AUTO, { NULL }
};
UNIT ptp_unit = {
UDATA (&ptp_svc, UNIT_SEQ+UNIT_ATTABLE, 0), SERIAL_OUT_WAIT
};
REG ptp_reg[] = {
{ GRDATAD (BUF, ptp_unit.buf, DEV_RDX, 8, 0, "last data item processed") },
{ GRDATAD (CSR, ptp_csr, DEV_RDX, 16, 0, "control/status register") },
{ FLDATAD (INT, IREQ (PTP), INT_V_PTP, "interrupt pending flag") },
{ FLDATAD (ERR, ptp_csr, CSR_V_ERR, "error flag (CSR<15>)") },
{ FLDATAD (DONE, ptp_csr, CSR_V_DONE, "device done flag (CSR<7>)") },
{ FLDATAD (IE, ptp_csr, CSR_V_IE, "interrupt enable flag (CSR<6>)") },
{ DRDATAD (POS, ptp_unit.pos, T_ADDR_W, "position in the output file"), PV_LEFT },
{ DRDATAD (TIME, ptp_unit.wait, 24, "time from I/O initiation to interrupt"), PV_LEFT },
{ FLDATAD (STOP_IOE, ptp_stopioe, 0, "stop on I/O error") },
{ GRDATA (DEVADDR, ptp_dib.ba, DEV_RDX, 32, 0), REG_HRO },
{ GRDATA (DEVVEC, ptp_dib.vec, DEV_RDX, 16, 0), REG_HRO },
{ NULL }
};
MTAB ptp_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL,
NULL, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL,
NULL, &show_vec, NULL },
{ 0 }
};
DEVICE ptp_dev = {
"PTP", &ptp_unit, ptp_reg, ptp_mod,
1, 10, 31, 1, DEV_RDX, 8,
NULL, NULL, &ptp_reset,
NULL, &ptp_attach, &ptp_detach,
&ptp_dib, DEV_DISABLE | PT_DIS | DEV_UBUS | DEV_QBUS, 0,
NULL, NULL, NULL, &ptp_help, NULL, NULL,
&ptp_description
};
/* Paper tape reader I/O address routines */
t_stat ptr_rd (int32 *data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptr csr */
*data = ptr_csr & PTRCSR_IMP;
return SCPE_OK;
case 1: /* ptr buf */
ptr_csr = ptr_csr & ~CSR_DONE;
CLR_INT (PTR);
*data = ptr_unit.buf & 0377;
return SCPE_OK;
}
return SCPE_NXM; /* can't get here */
}
t_stat ptr_wr (int32 data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptr csr */
if (PA & 1)
return SCPE_OK;
if ((data & CSR_IE) == 0)
CLR_INT (PTR);
else if (((ptr_csr & CSR_IE) == 0) && (ptr_csr & (CSR_ERR | CSR_DONE)))
SET_INT (PTR);
if (data & CSR_GO) {
ptr_csr = (ptr_csr & ~CSR_DONE) | CSR_BUSY;
CLR_INT (PTR);
if (ptr_unit.flags & UNIT_ATT) /* data to read? */
sim_activate (&ptr_unit, ptr_unit.wait);
else sim_activate (&ptr_unit, 0); /* error if not */
}
ptr_csr = (ptr_csr & ~PTRCSR_RW) | (data & PTRCSR_RW);
return SCPE_OK;
case 1: /* ptr buf */
return SCPE_OK;
} /* end switch PA */
return SCPE_NXM; /* can't get here */
}
/* Paper tape reader service */
t_stat ptr_svc (UNIT *uptr)
{
int32 temp;
ptr_csr = (ptr_csr | CSR_ERR) & ~CSR_BUSY;
if (ptr_csr & CSR_IE) SET_INT (PTR);
if ((ptr_unit.flags & UNIT_ATT) == 0)
return IORETURN (ptr_stopioe, SCPE_UNATT);
if ((temp = getc (ptr_unit.fileref)) == EOF) {
if (feof (ptr_unit.fileref)) {
if (ptr_stopioe)
sim_printf ("PTR end of file\n");
else return SCPE_OK;
}
else sim_perror ("PTR I/O error");
clearerr (ptr_unit.fileref);
return SCPE_IOERR;
}
ptr_csr = (ptr_csr | CSR_DONE) & ~CSR_ERR;
ptr_unit.buf = temp & 0377;
ptr_unit.pos = ptr_unit.pos + 1;
return SCPE_OK;
}
/* Paper tape reader support routines */
t_stat ptr_reset (DEVICE *dptr)
{
ptr_unit.buf = 0;
ptr_csr = 0;
if ((ptr_unit.flags & UNIT_ATT) == 0)
ptr_csr = ptr_csr | CSR_ERR;
CLR_INT (PTR);
sim_cancel (&ptr_unit);
return auto_config (dptr->name, 1);
}
t_stat ptr_attach (UNIT *uptr, CONST char *cptr)
{
t_stat reason;
reason = attach_unit (uptr, cptr);
if ((ptr_unit.flags & UNIT_ATT) == 0)
ptr_csr = ptr_csr | CSR_ERR;
else ptr_csr = ptr_csr & ~CSR_ERR;
return reason;
}
t_stat ptr_detach (UNIT *uptr)
{
ptr_csr = ptr_csr | CSR_ERR;
return detach_unit (uptr);
}
/* Paper tape punch I/O address routines */
t_stat ptp_rd (int32 *data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptp csr */
*data = ptp_csr & PTPCSR_IMP;
return SCPE_OK;
case 1: /* ptp buf */
*data = ptp_unit.buf;
return SCPE_OK;
}
return SCPE_NXM; /* can't get here */
}
t_stat ptp_wr (int32 data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptp csr */
if (PA & 1)
return SCPE_OK;
if ((data & CSR_IE) == 0)
CLR_INT (PTP);
else if (((ptp_csr & CSR_IE) == 0) && (ptp_csr & (CSR_ERR | CSR_DONE)))
SET_INT (PTP);
ptp_csr = (ptp_csr & ~PTPCSR_RW) | (data & PTPCSR_RW);
return SCPE_OK;
case 1: /* ptp buf */
if ((PA & 1) == 0)
ptp_unit.buf = data & 0377;
ptp_csr = ptp_csr & ~CSR_DONE;
CLR_INT (PTP);
if (ptp_unit.flags & UNIT_ATT) /* file to write? */
sim_activate (&ptp_unit, ptp_unit.wait);
else sim_activate (&ptp_unit, 0); /* error if not */
return SCPE_OK;
} /* end switch PA */
return SCPE_NXM; /* can't get here */
}
/* Paper tape punch service */
t_stat ptp_svc (UNIT *uptr)
{
ptp_csr = ptp_csr | CSR_ERR | CSR_DONE;
if (ptp_csr & CSR_IE)
SET_INT (PTP);
if ((ptp_unit.flags & UNIT_ATT) == 0)
return IORETURN (ptp_stopioe, SCPE_UNATT);
if (putc (ptp_unit.buf, ptp_unit.fileref) == EOF) {
sim_perror ("PTP I/O error");
clearerr (ptp_unit.fileref);
return SCPE_IOERR;
}
ptp_csr = ptp_csr & ~CSR_ERR;
ptp_unit.pos = ptp_unit.pos + 1;
return SCPE_OK;
}
/* Paper tape punch support routines */
t_stat ptp_reset (DEVICE *dptr)
{
ptp_unit.buf = 0;
ptp_csr = CSR_DONE;
if ((ptp_unit.flags & UNIT_ATT) == 0)
ptp_csr = ptp_csr | CSR_ERR;
CLR_INT (PTP);
sim_cancel (&ptp_unit); /* deactivate unit */
return auto_config (dptr->name, 1);
}
t_stat ptp_attach (UNIT *uptr, CONST char *cptr)
{
t_stat reason;
reason = attach_unit (uptr, cptr);
if ((ptp_unit.flags & UNIT_ATT) == 0)
ptp_csr = ptp_csr | CSR_ERR;
else ptp_csr = ptp_csr & ~CSR_ERR;
return reason;
}
t_stat ptp_detach (UNIT *uptr)
{
ptp_csr = ptp_csr | CSR_ERR;
return detach_unit (uptr);
}
t_stat ptr_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr)
{
fprintf (st, "PC11 Paper Tape Reader (PTR)\n\n");
fprintf (st, "The paper tape reader (PTR) reads data from a disk file. The POS register\n");
fprintf (st, "specifies the number of the next data item to be read. Thus, by changing\n");
fprintf (st, "POS, the user can backspace or advance the reader.\n");
fprint_set_help (st, dptr);
fprint_show_help (st, dptr);
fprint_reg_help (st, dptr);
fprintf (st, "\nError handling is as follows:\n\n");
fprintf (st, " error STOP_IOE processed as\n");
fprintf (st, " not attached 1 report error and stop\n");
fprintf (st, " 0 out of tape\n\n");
fprintf (st, " end of file 1 report error and stop\n");
fprintf (st, " 0 out of tape\n");
fprintf (st, " OS I/O error x report error and stop\n");
return SCPE_OK;
}
const char *ptr_description (DEVICE *dptr)
{
return "PC11 paper tape reader";
}
t_stat ptp_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr)
{
fprintf (st, "PC11 Paper Tape Punch (PTP)\n\n");
fprintf (st, "The paper tape punch (PTP) writes data to a disk file. The POS register\n");
fprintf (st, "specifies the number of the next data item to be written. Thus, by changing\n");
fprintf (st, "POS, the user can backspace or advance the punch.\n\n");
fprintf (st, "The default position after ATTACH is to position at the end of an existing file.\n");
fprintf (st, "A new file can be created if you attach with the -N switch.\n\n");
fprint_set_help (st, dptr);
fprint_show_help (st, dptr);
fprint_reg_help (st, dptr);
fprintf (st, "\nError handling is as follows:\n\n");
fprintf (st, " error STOP_IOE processed as\n");
fprintf (st, " not attached 1 report error and stop\n");
fprintf (st, " 0 out of tape\n\n");
fprintf (st, " OS I/O error x report error and stop\n");
return SCPE_OK;
}
const char *ptp_description (DEVICE *dptr)
{
return "PC11 paper tape punch";
}