RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially debugged. Do NOT enable these features for normal operations. 1. New Features in 3.1-0 1.1 SCP and libraries - Added simulated Ethernet support for VMS, FreeBSD, Mac OS/X. - Added status return to tmxr_putc_ln. - Added sim_putchar_s to handle possible output stalls. 1.2 All DECtapes - Added "DECtape off reel" error stop. 1.3 All Asynchronous Consoles - Added support for output congestion stall if using a Telnet connection. 1.4 PDP-1 - Added Type 23 parallel drum support. 1.5 PDP-8 - Added instruction history. - Added TSC8-75 option support for ETOS. - Added TD8E DECtape support. 1.6 PDP-18b - Added instruction history. - Changed PDP-9, PDP-15 API default to enabled. 1.7 PDP-11 - Added support for 18b only Qbus devices. - Formalized bus and addressing definitions. - Added control to enable/disable autoconfiguration. - Added stub support for second Unibus Ethernet controller. 1.7 Interdata 32b - Added instruction history. 1.8 Eclipse - Added floating point support. - Added programmable interval timer support. 1.9 H316 - Added DMA/DMC support. - Added fixed head disk support. - Added moving head disk support. - Added magtape support. 1.10 IBM 1130 (Brian Knittel) - Added support for physical card reader, using the Cardread interface (www.ibm1130.org/sim/downloads). - Added support for physical printer (flushes output buffer after each line). 2. Bugs Fixed in 3.1-0 2.1 SCP and libraries - Fixed numerous bugs in Ethernet library. 2.2 All DECtapes - Fixed reverse checksum value in 'read all' mode. - Simplified (and sped up) timing. 2.3 PDP-8 - Fixed bug in RX28 read status (found by Charles Dickman). - Fixed RX28 double density write. 2.4 PDP-18b - Fixed autoincrement bug in PDP-4, PDP-7, PDP-9. 2.5 PDP-11/VAX - Revised RQ MB->LBN conversion for greater accuracy. - Fixed bug in IO configuration (found by David Hittner). - Fixed bug with multiple RQ RAUSER drives. - Fixed bug in second Qbus Ethernet controller interrupts. 2.6 Nova/Eclipse - Fixed bugs in DKP flag clear, map setup, map usage (Charles Owen). - Fixed bug in MT, reset completes despite I/O reset (Charles Owen). - Fixed bug in MT, space operations return word count (Charles Owen). 2.7 IBM 1130 (Brian Knittel) - Fixed bug in setting carry bit in subtract and subtract double. - Fixed timing problem in console printer simulation. 2.8 1620 - Fixed bug in branch digit (found by Dave Babcock). 3. New Features in 3.0 vs prior releases 3.1 SCP and Libraries - Added ASSIGN/DEASSIGN (logical name) commands. - Changed RESTORE to unconditionally detach files. - Added E11 and TPC format support to magtape library. - Fixed bug in SHOW CONNECTIONS. - Added USE_ADDR64 support. 3.2 All magtapes - Magtapes support SIMH format, E11 format, and TPC format (read only). - SET <tape_unit> FORMAT=format sets the specified tape unit's format. - SHOW <tape_unit> FORMAT displays the specified tape unit's format. - Tape format can also be set as part of the ATTACH command, using the -F switch. 3.3 VAX - VAX can be compiled without USE_INT64. - If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support files > 2GB. - VAX ROM has speed control (SET ROM DELAY/NODELAY). 3.4 PDP-1 - Added block loader format support to LOAD. - Changed BOOT PTR to allow loading of all of the first bank of memory. - The LOAD command takes an optional argument specifying the memory field to be loaded. - The PTR BOOT command takes its starting memory field from the TA (address switch) register. 3.5 PDP-18b Family - Added PDP-4 EAE support. - Added PDP-15 FP15 support. - Added PDP-15 XVM support. - Added PDP-15 "re-entrancy ECO". - Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR. 4. Bugs Fixed in 3.0 vs prior releases 4.1 SCP and Libraries - Fixed end of file problem in dep, idep. - Fixed handling of trailing spaces in dep, idep. 4.2 VAX - Fixed CVTfi bug: integer overflow not set if exponent out of range - Fixed EMODx bugs: o First and second operands reversed o Separated fraction received wrong exponent o Overflow calculation on separated integer incorrect o Fraction not set to zero if exponent out of range - Fixed interval timer and ROM access to pass power-up self-test even on very fast host processors (fixes from Mark Pizzolato). - Fixed bug in user disk size (found by Chaskiel M Grundman). 4.3 1401 - Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS. - Fixed MCE bug, BS off by 1 if zero suppress. - Fixed chaining bug, D lost if return to SCP. - Fixed H branch, branch occurs after continue. - Added check for invalid 8 character MCW, LCA. - Fixed magtape load-mode end of record response. - Revised fetch to model hardware more closely. - Fixed tape read end-of-record handling based on real 1401. - Added diagnostic read (space forward). 4.4 Nova - Fixed DSK variable size interaction with restore. - Fixed bug in DSK set size routine. 4.5 PDP-1 - Fixed DT variable size interaction with restore. - Updated CPU, line printer, standard devices to detect indefinite I/O wait. - Fixed incorrect logical, missing activate, break in drum simulator. - Fixed bugs in instruction decoding, overprinting for line printer. - Fixed system hang if continue after PTR error. - Fixed PTR to start/stop on successive rpa instructions. 4.6 PDP-11 - Fixed DT variable size interaction with restore. - Fixed bug in MMR1 update (found by Tim Stark). - Added XQ features and fixed bugs: o Corrected XQ interrupts on IE state transition (code by Tom Evans). o Added XQ interrupt clear on soft reset. o Removed XQ interrupt when setting XL or RL (multiple people). o Added SET/SHOW XQ STATS. o Added SHOW XQ FILTERS. o Added ability to split received packet into multiple buffers. o Added explicit runt and giant packet processing. - Fixed bug in user disk size (found by Chaskiel M Grundman). 4.7 PDP-18B - Fixed DT, RF variable size interaction with restore. - Fixed MT bug in MTTR. - Fixed bug in PDP-4 line printer overprinting. - Fixed bug in PDP-15 memory protect/skip interaction. - Fixed bug in RF set size routine. - Increased PTP TIME for PDP-15 operating systems. - Fixed priorities in PDP-15 API (differs from PDP-9). - Fixed sign handling in PDP-15 EAE unsigned mul/div (differs from PDP-9). - Fixed bug in CAF, clears API subsystem. 4.8 PDP-8 - Fixed DT, DF, RF, RX variable size interaction with restore. - Fixed MT bug in SKTR. - Fixed bug in DF, RF set size routine. 4.9 HP2100 - Fixed bug in DP (13210A controller only), DQ read status. - Fixed bug in DP, DQ seek complete. - Fixed DR drum sizes. - Fixed DR variable capacity interaction with SAVE/RESTORE. 4.10 GRI - Fixed bug in SC queue pointer management. 4.11 PDP-10 - Fixed bug in RP read header. 4.12 Ibm1130 - Fixed bugs found by APL 1130. 4.13 Altairz80 - Fixed bug in real-time clock on Windows host. 4.14 1620 - Fixed bug in immediate index add (found by Michael Short).
397 lines
11 KiB
C
397 lines
11 KiB
C
/* gri_stddev.c: GRI-909 standard devices
|
||
|
||
Copyright (c) 2001-2004, Robert M Supnik
|
||
|
||
Permission is hereby granted, free of charge, to any person obtaining a
|
||
copy of this software and associated documentation files (the "Software"),
|
||
to deal in the Software without restriction, including without limitation
|
||
the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||
and/or sell copies of the Software, and to permit persons to whom the
|
||
Software is furnished to do so, subject to the following conditions:
|
||
|
||
The above copyright notice and this permission notice shall be included in
|
||
all copies or substantial portions of the Software.
|
||
|
||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
|
||
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||
|
||
Except as contained in this notice, the name of Robert M Supnik shall not
|
||
be used in advertising or otherwise to promote the sale, use or other dealings
|
||
in this Software without prior written authorization from Robert M Supnik.
|
||
|
||
tti S42-001 terminal input
|
||
tto S42-002 terminal output
|
||
hsr S42-004 high speed reader
|
||
hsp S42-006 high speed punch
|
||
rtc real time clock
|
||
|
||
29-Dec-03 RMS Added support for console backpressure
|
||
25-Apr-03 RMS Revised for extended file support
|
||
22-Dec-02 RMS Added break support
|
||
01-Nov-02 RMS Added 7b/8B support to terminal
|
||
*/
|
||
|
||
#include "gri_defs.h"
|
||
#include <ctype.h>
|
||
|
||
#define UNIT_V_8B (UNIT_V_UF + 0) /* 8B */
|
||
#define UNIT_V_KSR (UNIT_V_UF + 1) /* KSR33 */
|
||
#define UNIT_8B (1 << UNIT_V_8B)
|
||
#define UNIT_KSR (1 << UNIT_V_KSR)
|
||
|
||
uint32 hsr_stopioe = 1, hsp_stopioe = 1;
|
||
|
||
extern uint16 M[];
|
||
extern uint32 dev_done, ISR;
|
||
|
||
t_stat tti_svc (UNIT *uhsr);
|
||
t_stat tto_svc (UNIT *uhsr);
|
||
t_stat tti_reset (DEVICE *dhsr);
|
||
t_stat tto_reset (DEVICE *dhsr);
|
||
t_stat tty_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc);
|
||
t_stat hsr_svc (UNIT *uhsr);
|
||
t_stat hsp_svc (UNIT *uhsr);
|
||
t_stat hsr_reset (DEVICE *dhsr);
|
||
t_stat hsp_reset (DEVICE *dhsr);
|
||
t_stat rtc_svc (UNIT *uhsr);
|
||
t_stat rtc_reset (DEVICE *dhsr);
|
||
int32 rtc_tps = 1000;
|
||
|
||
/* TTI data structures
|
||
|
||
tti_dev TTI device descriptor
|
||
tti_unit TTI unit descriptor
|
||
tti_reg TTI register list
|
||
tti_mod TTI modifiers list
|
||
*/
|
||
|
||
UNIT tti_unit = { UDATA (&tti_svc, UNIT_KSR, 0), KBD_POLL_WAIT };
|
||
|
||
REG tti_reg[] = {
|
||
{ ORDATA (BUF, tti_unit.buf, 8) },
|
||
{ FLDATA (IRDY, dev_done, INT_V_TTI) },
|
||
{ FLDATA (IENB, ISR, INT_V_TTI) },
|
||
{ DRDATA (POS, tti_unit.pos, T_ADDR_W), PV_LEFT },
|
||
{ DRDATA (TIME, tti_unit.wait, 24), REG_NZ + PV_LEFT },
|
||
{ FLDATA (UC, tti_unit.flags, UNIT_V_KSR), REG_HRO },
|
||
{ NULL } };
|
||
|
||
MTAB tti_mod[] = {
|
||
{ UNIT_KSR+UNIT_8B, UNIT_KSR, "KSR", "KSR", &tty_set_mode },
|
||
{ UNIT_KSR+UNIT_8B, 0 , "7b" , "7B" , &tty_set_mode },
|
||
{ UNIT_KSR+UNIT_8B, UNIT_8B , "8b" , "8B" , &tty_set_mode },
|
||
{ 0 } };
|
||
|
||
DEVICE tti_dev = {
|
||
"TTI", &tti_unit, tti_reg, tti_mod,
|
||
1, 10, 31, 1, 8, 8,
|
||
NULL, NULL, &tti_reset,
|
||
NULL, NULL, NULL };
|
||
|
||
/* TTO data structures
|
||
|
||
tto_dev TTO device descriptor
|
||
tto_unit TTO unit descriptor
|
||
tto_reg TTO register list
|
||
*/
|
||
|
||
UNIT tto_unit = { UDATA (&tto_svc, UNIT_KSR, 0), SERIAL_OUT_WAIT };
|
||
|
||
REG tto_reg[] = {
|
||
{ ORDATA (BUF, tto_unit.buf, 8) },
|
||
{ FLDATA (ORDY, dev_done, INT_V_TTO) },
|
||
{ FLDATA (IENB, ISR, INT_V_TTO) },
|
||
{ DRDATA (POS, tto_unit.pos, T_ADDR_W), PV_LEFT },
|
||
{ DRDATA (TIME, tto_unit.wait, 24), PV_LEFT },
|
||
{ NULL } };
|
||
|
||
MTAB tto_mod[] = {
|
||
{ UNIT_KSR+UNIT_8B, UNIT_KSR, "KSR", "KSR", &tty_set_mode },
|
||
{ UNIT_KSR+UNIT_8B, 0 , "7b" , "7B" , &tty_set_mode },
|
||
{ UNIT_KSR+UNIT_8B, UNIT_8B , "8b" , "8B" , &tty_set_mode },
|
||
{ 0 } };
|
||
|
||
DEVICE tto_dev = {
|
||
"TTO", &tto_unit, tto_reg, tto_mod,
|
||
1, 10, 31, 1, 8, 8,
|
||
NULL, NULL, &tto_reset,
|
||
NULL, NULL, NULL };
|
||
|
||
/* HSR data structures
|
||
|
||
hsr_dev HSR device descriptor
|
||
hsr_unit HSR unit descriptor
|
||
hsr_reg HSR register list
|
||
hsr_mod HSR modifiers list
|
||
*/
|
||
|
||
UNIT hsr_unit = {
|
||
UDATA (&hsr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0), SERIAL_IN_WAIT };
|
||
|
||
REG hsr_reg[] = {
|
||
{ ORDATA (BUF, hsr_unit.buf, 8) },
|
||
{ FLDATA (IRDY, dev_done, INT_V_HSR) },
|
||
{ FLDATA (IENB, ISR, INT_V_HSR) },
|
||
{ DRDATA (POS, hsr_unit.pos, T_ADDR_W), PV_LEFT },
|
||
{ DRDATA (TIME, hsr_unit.wait, 24), REG_NZ + PV_LEFT },
|
||
{ FLDATA (STOP_IOE, hsr_stopioe, 0) },
|
||
{ NULL } };
|
||
|
||
DEVICE hsr_dev = {
|
||
"HSR", &hsr_unit, hsr_reg, NULL,
|
||
1, 10, 31, 1, 8, 8,
|
||
NULL, NULL, &hsr_reset,
|
||
NULL, NULL, NULL };
|
||
|
||
/* HSP data structures
|
||
|
||
hsp_dev HSP device descriptor
|
||
hsp_unit HSP unit descriptor
|
||
hsp_reg HSP register list
|
||
*/
|
||
|
||
UNIT hsp_unit = {
|
||
UDATA (&hsp_svc, UNIT_SEQ+UNIT_ATTABLE, 0), SERIAL_OUT_WAIT };
|
||
|
||
REG hsp_reg[] = {
|
||
{ ORDATA (BUF, hsp_unit.buf, 8) },
|
||
{ FLDATA (ORDY, dev_done, INT_V_HSP) },
|
||
{ FLDATA (IENB, ISR, INT_V_HSP) },
|
||
{ DRDATA (POS, hsp_unit.pos, T_ADDR_W), PV_LEFT },
|
||
{ DRDATA (TIME, hsp_unit.wait, 24), PV_LEFT },
|
||
{ FLDATA (STOP_IOE, hsp_stopioe, 0) },
|
||
{ NULL } };
|
||
|
||
DEVICE hsp_dev = {
|
||
"HSP", &hsp_unit, hsp_reg, NULL,
|
||
1, 10, 31, 1, 8, 8,
|
||
NULL, NULL, &hsp_reset,
|
||
NULL, NULL, NULL };
|
||
|
||
/* RTC data structures
|
||
|
||
rtc_dev RTC device descriptor
|
||
rtc_unit RTC unit descriptor
|
||
rtc_reg RTC register list
|
||
*/
|
||
|
||
UNIT rtc_unit = { UDATA (&rtc_svc, 0, 0), 16000 };
|
||
|
||
REG rtc_reg[] = {
|
||
{ FLDATA (RDY, dev_done, INT_V_RTC) },
|
||
{ FLDATA (IENB, ISR, INT_V_RTC) },
|
||
{ DRDATA (TIME, rtc_unit.wait, 24), REG_NZ + PV_LEFT },
|
||
{ DRDATA (TPS, rtc_tps, 8), REG_NZ + PV_LEFT + REG_HIDDEN },
|
||
{ NULL } };
|
||
|
||
DEVICE rtc_dev = {
|
||
"RTC", &rtc_unit, rtc_reg, NULL,
|
||
1, 0, 0, 0, 0, 0,
|
||
NULL, NULL, &rtc_reset,
|
||
NULL, NULL, NULL };
|
||
|
||
/* Console terminal function processors */
|
||
|
||
int32 tty_rd (int32 src, int32 ea)
|
||
{
|
||
return tti_unit.buf; /* return data */
|
||
}
|
||
|
||
t_stat tty_wr (uint32 dst, uint32 val)
|
||
{
|
||
tto_unit.buf = val & 0377; /* save char */
|
||
dev_done = dev_done & ~INT_TTO; /* clear ready */
|
||
sim_activate (&tto_unit, tto_unit.wait); /* activate unit */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat tty_fo (uint32 op)
|
||
{
|
||
if (op & TTY_IRDY) dev_done = dev_done & ~INT_TTI;
|
||
if (op & TTY_ORDY) dev_done = dev_done & ~INT_TTO;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
uint32 tty_sf (uint32 op)
|
||
{
|
||
if (((op & TTY_IRDY) && (dev_done & INT_TTI)) ||
|
||
((op & TTY_ORDY) && (dev_done & INT_TTO))) return 1;
|
||
return 0;
|
||
}
|
||
|
||
/* Service routines */
|
||
|
||
t_stat tti_svc (UNIT *uptr)
|
||
{
|
||
int32 c;
|
||
|
||
sim_activate (&tti_unit, tti_unit.wait); /* continue poll */
|
||
if ((c = sim_poll_kbd ()) < SCPE_KFLAG) return c; /* no char or error? */
|
||
if (c & SCPE_BREAK) tti_unit.buf = 0; /* break? */
|
||
else if (tti_unit.flags & UNIT_KSR) { /* KSR? */
|
||
c = c & 0177; /* force 7b */
|
||
if (islower (c)) c = toupper (c); /* cvt to UC */
|
||
tti_unit.buf = c | 0200; } /* add TTY bit */
|
||
else tti_unit.buf = c & ((tti_unit.flags & UNIT_8B)? 0377: 0177);
|
||
dev_done = dev_done | INT_TTI; /* set ready */
|
||
tti_unit.pos = tti_unit.pos + 1;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat tto_svc (UNIT *uptr)
|
||
{
|
||
int32 c;
|
||
t_stat r;
|
||
|
||
if (tto_unit.flags & UNIT_KSR) { /* KSR? */
|
||
c = tto_unit.buf & 0177; /* force 7b */
|
||
if (islower (c)) c = toupper (c); } /* cvt to UC */
|
||
else c = tto_unit.buf & ((tto_unit.flags & UNIT_8B)? 0377: 0177);
|
||
if ((r = sim_putchar_s (c)) != SCPE_OK) { /* output; error? */
|
||
sim_activate (uptr, uptr->wait); /* try again */
|
||
return ((r == SCPE_STALL)? SCPE_OK: r); } /* !stall? report */
|
||
dev_done = dev_done | INT_TTO; /* set ready */
|
||
tto_unit.pos = tto_unit.pos + 1;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Reset routines */
|
||
|
||
t_stat tti_reset (DEVICE *dptr)
|
||
{
|
||
tti_unit.buf = 0; /* clear buffer */
|
||
dev_done = dev_done & ~INT_TTI; /* clear ready */
|
||
sim_activate (&tti_unit, tti_unit.wait); /* activate unit */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat tto_reset (DEVICE *dptr)
|
||
{
|
||
tto_unit.buf = 0; /* clear buffer */
|
||
dev_done = dev_done | INT_TTO; /* set ready */
|
||
sim_cancel (&tto_unit); /* deactivate unit */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat tty_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc)
|
||
{
|
||
tti_unit.flags = (tti_unit.flags & ~(UNIT_KSR | UNIT_8B)) | val;
|
||
tto_unit.flags = (tto_unit.flags & ~(UNIT_KSR | UNIT_8B)) | val;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* High speed paper tape function processors */
|
||
|
||
int32 hsrp_rd (int32 src, int32 ea)
|
||
{
|
||
return hsr_unit.buf; /* return data */
|
||
}
|
||
|
||
t_stat hsrp_wr (uint32 dst, uint32 val)
|
||
{
|
||
hsp_unit.buf = val & 0377; /* save char */
|
||
dev_done = dev_done & ~INT_HSP; /* clear ready */
|
||
sim_activate (&hsp_unit, hsp_unit.wait); /* activate unit */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat hsrp_fo (uint32 op)
|
||
{
|
||
if (op & PT_IRDY) dev_done = dev_done & ~INT_HSR;
|
||
if (op & PT_ORDY) dev_done = dev_done & ~INT_HSP;
|
||
if (op & PT_STRT) sim_activate (&hsr_unit, hsr_unit.wait);
|
||
return SCPE_OK;
|
||
}
|
||
|
||
uint32 hsrp_sf (uint32 op)
|
||
{
|
||
if (((op & PT_IRDY) && (dev_done & INT_HSR)) ||
|
||
((op & PT_ORDY) && (dev_done & INT_HSP))) return 1;
|
||
return 0;
|
||
}
|
||
|
||
t_stat hsr_svc (UNIT *uptr)
|
||
{
|
||
int32 temp;
|
||
|
||
if ((hsr_unit.flags & UNIT_ATT) == 0) /* attached? */
|
||
return IORETURN (hsr_stopioe, SCPE_UNATT);
|
||
if ((temp = getc (hsr_unit.fileref)) == EOF) { /* read char */
|
||
if (feof (hsr_unit.fileref)) { /* err or eof? */
|
||
if (hsr_stopioe) printf ("HSR end of file\n");
|
||
else return SCPE_OK; }
|
||
else perror ("HSR I/O error");
|
||
clearerr (hsr_unit.fileref);
|
||
return SCPE_IOERR; }
|
||
dev_done = dev_done | INT_HSR; /* set ready */
|
||
hsr_unit.buf = temp & 0377; /* save char */
|
||
hsr_unit.pos = hsr_unit.pos + 1;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat hsp_svc (UNIT *uptr)
|
||
{
|
||
dev_done = dev_done | INT_HSP; /* set ready */
|
||
if ((hsp_unit.flags & UNIT_ATT) == 0) /* attached? */
|
||
return IORETURN (hsp_stopioe, SCPE_UNATT);
|
||
if (putc (hsp_unit.buf, hsp_unit.fileref) == EOF) { /* write char */
|
||
perror ("HSP I/O error"); /* error? */
|
||
clearerr (hsp_unit.fileref);
|
||
return SCPE_IOERR; }
|
||
hsp_unit.pos = hsp_unit.pos + 1;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Reset routines */
|
||
|
||
t_stat hsr_reset (DEVICE *dptr)
|
||
{
|
||
hsr_unit.buf = 0; /* clear buffer */
|
||
dev_done = dev_done & ~INT_HSR; /* clear ready */
|
||
sim_cancel (&hsr_unit); /* deactivate unit */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat hsp_reset (DEVICE *dptr)
|
||
{
|
||
hsp_unit.buf = 0; /* clear buffer */
|
||
dev_done = dev_done | INT_HSP; /* set ready */
|
||
sim_cancel (&hsp_unit); /* deactivate unit */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Clock function processors */
|
||
|
||
t_stat rtc_fo (int32 op)
|
||
{
|
||
if (op & RTC_OFF) sim_cancel (&rtc_unit); /* clock off? */
|
||
if ((op & RTC_ON) && !sim_is_active (&rtc_unit)) /* clock on? */
|
||
sim_activate (&rtc_unit, sim_rtc_init (rtc_unit.wait));
|
||
if (op & RTC_OV) dev_done = dev_done & ~INT_RTC; /* clr ovflo? */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
int32 rtc_sf (int32 op)
|
||
{
|
||
if ((op & RTC_OV) && (dev_done & INT_RTC)) return 1;
|
||
return 0;
|
||
}
|
||
|
||
t_stat rtc_svc (UNIT *uptr)
|
||
{
|
||
M[RTC_CTR] = (M[RTC_CTR] + 1) & DMASK; /* incr counter */
|
||
if (M[RTC_CTR] == 0) dev_done = dev_done | INT_RTC; /* ovflo? set ready */
|
||
sim_activate (&rtc_unit, sim_rtc_calb (rtc_tps)); /* reactivate */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat rtc_reset (DEVICE *dptr)
|
||
{
|
||
dev_done = dev_done & ~INT_RTC; /* clear ready */
|
||
sim_cancel (&rtc_unit); /* stop clock */
|
||
return SCPE_OK;
|
||
}
|