simh-testsetgenerator/PDP18B/pdp18b_rf.c
Bob Supnik 1da2d9452d Notes For V3.1-0
RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially
debugged.  Do NOT enable these features for normal operations.

1. New Features in 3.1-0

1.1 SCP and libraries

- Added simulated Ethernet support for VMS, FreeBSD, Mac OS/X.
- Added status return to tmxr_putc_ln.
- Added sim_putchar_s to handle possible output stalls.

1.2 All DECtapes

- Added "DECtape off reel" error stop.

1.3 All Asynchronous Consoles

- Added support for output congestion stall if using a Telnet connection.

1.4 PDP-1

- Added Type 23 parallel drum support.

1.5 PDP-8

- Added instruction history.
- Added TSC8-75 option support for ETOS.
- Added TD8E DECtape support.

1.6 PDP-18b

- Added instruction history.
- Changed PDP-9, PDP-15 API default to enabled.

1.7 PDP-11

- Added support for 18b only Qbus devices.
- Formalized bus and addressing definitions.
- Added control to enable/disable autoconfiguration.
- Added stub support for second Unibus Ethernet controller.

1.7 Interdata 32b

- Added instruction history.

1.8 Eclipse

- Added floating point support.
- Added programmable interval timer support.

1.9 H316

- Added DMA/DMC support.
- Added fixed head disk support.
- Added moving head disk support.
- Added magtape support.

1.10 IBM 1130 (Brian Knittel)

- Added support for physical card reader, using the Cardread
interface (www.ibm1130.org/sim/downloads).
- Added support for physical printer (flushes output buffer after
each line).

2. Bugs Fixed in 3.1-0

2.1 SCP and libraries

- Fixed numerous bugs in Ethernet library.

2.2 All DECtapes

- Fixed reverse checksum value in 'read all' mode.
- Simplified (and sped up) timing.

2.3 PDP-8

- Fixed bug in RX28 read status (found by Charles Dickman).
- Fixed RX28 double density write.

2.4 PDP-18b

- Fixed autoincrement bug in PDP-4, PDP-7, PDP-9.

2.5 PDP-11/VAX

- Revised RQ MB->LBN conversion for greater accuracy.
- Fixed bug in IO configuration (found by David Hittner).
- Fixed bug with multiple RQ RAUSER drives.
- Fixed bug in second Qbus Ethernet controller interrupts.

2.6 Nova/Eclipse

- Fixed bugs in DKP flag clear, map setup, map usage (Charles Owen).
- Fixed bug in MT, reset completes despite I/O reset (Charles Owen).
- Fixed bug in MT, space operations return word count (Charles Owen).

2.7 IBM 1130 (Brian Knittel)

- Fixed bug in setting carry bit in subtract and subtract double.
- Fixed timing problem in console printer simulation.

2.8 1620

- Fixed bug in branch digit (found by Dave Babcock).

3. New Features in 3.0 vs prior releases

3.1 SCP and Libraries

- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support.

3.2 All magtapes

- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
  the -F switch.

3.3 VAX

- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
  files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).

3.4 PDP-1

- Added block loader format support to LOAD.
- Changed BOOT PTR to allow loading of all of the first bank of memory.
- The LOAD command takes an optional argument specifying the memory field
  to be loaded.
- The PTR BOOT command takes its starting memory field from the TA (address
  switch) register.

3.5 PDP-18b Family

- Added PDP-4 EAE support.
- Added PDP-15 FP15 support.
- Added PDP-15 XVM support.
- Added PDP-15 "re-entrancy ECO".
- Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR.

4. Bugs Fixed in 3.0 vs prior releases

4.1 SCP and Libraries

- Fixed end of file problem in dep, idep.
- Fixed handling of trailing spaces in dep, idep.

4.2 VAX

- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
  o First and second operands reversed
  o Separated fraction received wrong exponent
  o Overflow calculation on separated integer incorrect
  o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
  fast host processors (fixes from Mark Pizzolato).
- Fixed bug in user disk size (found by Chaskiel M Grundman).

4.3 1401

- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
- Revised fetch to model hardware more closely.
- Fixed tape read end-of-record handling based on real 1401.
- Added diagnostic read (space forward).

4.4 Nova

- Fixed DSK variable size interaction with restore.
- Fixed bug in DSK set size routine.

4.5 PDP-1

- Fixed DT variable size interaction with restore.
- Updated CPU, line printer, standard devices to detect indefinite I/O wait.
- Fixed incorrect logical, missing activate, break in drum simulator.
- Fixed bugs in instruction decoding, overprinting for line printer.
- Fixed system hang if continue after PTR error.
- Fixed PTR to start/stop on successive rpa instructions.

4.6 PDP-11

- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
  o Corrected XQ interrupts on IE state transition (code by Tom Evans).
  o Added XQ interrupt clear on soft reset.
  o Removed XQ interrupt when setting XL or RL (multiple people).
  o Added SET/SHOW XQ STATS.
  o Added SHOW XQ FILTERS.
  o Added ability to split received packet into multiple buffers.
  o Added explicit runt and giant packet processing.
- Fixed bug in user disk size (found by Chaskiel M Grundman).

4.7 PDP-18B

- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
- Fixed bug in PDP-4 line printer overprinting.
- Fixed bug in PDP-15 memory protect/skip interaction.
- Fixed bug in RF set size routine.
- Increased PTP TIME for PDP-15 operating systems.
- Fixed priorities in PDP-15 API (differs from PDP-9).
- Fixed sign handling in PDP-15 EAE unsigned mul/div (differs from PDP-9).
- Fixed bug in CAF, clears API subsystem.

4.8 PDP-8

- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
- Fixed bug in DF, RF set size routine.

4.9 HP2100

- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
- Fixed DR drum sizes.
- Fixed DR variable capacity interaction with SAVE/RESTORE.

4.10 GRI

- Fixed bug in SC queue pointer management.

4.11 PDP-10

- Fixed bug in RP read header.

4.12 Ibm1130

- Fixed bugs found by APL 1130.

4.13 Altairz80

- Fixed bug in real-time clock on Windows host.

4.14 1620

- Fixed bug in immediate index add (found by Michael Short).
2011-04-15 08:34:20 -07:00

333 lines
11 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* pdp18b_rf.c: fixed head disk simulator
Copyright (c) 1993-2003, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
rf (PDP-9) RF09/RF09
(PDP-15) RF15/RS09
26-Oct-03 RMS Cleaned up buffer copy code
26-Jul-03 RMS Fixed bug in set size routine
14-Mar-03 RMS Fixed variable platter interaction with save/restore
03-Mar-03 RMS Fixed autosizing
12-Feb-03 RMS Removed 8 platter sizing hack
05-Feb-03 RMS Fixed decode bugs, added variable and autosizing
05-Oct-02 RMS Added DIB, dev number support
06-Jan-02 RMS Revised enable/disable support
25-Nov-01 RMS Revised interrupt structure
24-Nov-01 RMS Changed WLK to array
26-Apr-01 RMS Added device enable/disable support
15-Feb-01 RMS Fixed 3 cycle data break sequencing
30-Nov-99 RMS Added non-zero requirement to rf_time
14-Apr-99 RMS Changed t_addr to unsigned
The RFxx is a head-per-track disk. It uses the multicycle data break
facility. To minimize overhead, the entire RFxx is buffered in memory.
Two timing parameters are provided:
rf_time Interword timing. Must be non-zero.
rf_burst Burst mode. If 0, DMA occurs cycle by cycle; otherwise,
DMA occurs in a burst.
*/
#include "pdp18b_defs.h"
#include <math.h>
#define UNIT_V_AUTO (UNIT_V_UF + 0) /* autosize */
#define UNIT_V_PLAT (UNIT_V_UF + 1) /* #platters - 1 */
#define UNIT_M_PLAT 07
#define UNIT_PLAT (UNIT_M_PLAT << UNIT_V_PLAT)
#define UNIT_GETP(x) ((((x) >> UNIT_V_PLAT) & UNIT_M_PLAT) + 1)
#define UNIT_AUTO (1 << UNIT_V_AUTO)
#define UNIT_PLAT (UNIT_M_PLAT << UNIT_V_PLAT)
/* Constants */
#define RF_NUMWD 2048 /* words/track */
#define RF_NUMTR 128 /* tracks/disk */
#define RF_DKSIZE (RF_NUMTR * RF_NUMWD) /* words/disk */
#define RF_NUMDK 8 /* disks/controller */
#define RF_WMASK (RF_NUMWD - 1) /* word mask */
#define RF_WC 036 /* word count */
#define RF_CA 037 /* current addr */
/* Function/status register */
#define RFS_ERR 0400000 /* error */
#define RFS_HDW 0200000 /* hardware error */
#define RFS_APE 0100000 /* addr parity error */
#define RFS_MXF 0040000 /* missed transfer */
#define RFS_WCE 0020000 /* write check error */
#define RFS_DPE 0010000 /* data parity error */
#define RFS_WLO 0004000 /* write lock error */
#define RFS_NED 0002000 /* non-existent disk */
#define RFS_DCH 0001000 /* data chan timing */
#define RFS_PGE 0000400 /* programming error */
#define RFS_DON 0000200 /* transfer complete */
#define RFS_V_FNC 1 /* function */
#define RFS_M_FNC 03
#define RFS_FNC (RFS_M_FNC << RFS_V_FNC)
#define FN_NOP 0
#define FN_READ 1
#define FN_WRITE 2
#define FN_WCHK 3
#define RFS_IE 0000001 /* interrupt enable */
#define RFS_CLR 0000170 /* always clear */
#define RFS_EFLGS (RFS_HDW | RFS_APE | RFS_MXF | RFS_WCE | \
RFS_DPE | RFS_WLO | RFS_NED ) /* error flags */
#define GET_FNC(x) (((x) >> RFS_V_FNC) & RFS_M_FNC)
#define GET_POS(x) ((int) fmod (sim_gtime () / ((double) (x)), \
((double) RF_NUMWD)))
#define RF_BUSY (sim_is_active (&rf_unit))
extern int32 M[];
extern int32 int_hwre[API_HLVL+1];
extern UNIT cpu_unit;
int32 rf_sta = 0; /* status register */
int32 rf_da = 0; /* disk address */
int32 rf_dbuf = 0; /* data buffer */
int32 rf_wlk[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; /* write lock */
int32 rf_time = 10; /* inter-word time */
int32 rf_burst = 1; /* burst mode flag */
int32 rf_stopioe = 1; /* stop on error */
DEVICE rf_dev;
int32 rf70 (int32 pulse, int32 dat);
int32 rf72 (int32 pulse, int32 dat);
int32 rf_iors (void);
t_stat rf_svc (UNIT *uptr);
t_stat rf_reset (DEVICE *dptr);
int32 rf_updsta (int32 new);
t_stat rf_attach (UNIT *uptr, char *cptr);
t_stat rf_set_size (UNIT *uptr, int32 val, char *cptr, void *desc);
/* RF data structures
rf_dev RF device descriptor
rf_unit RF unit descriptor
rf_reg RF register list
*/
DIB rf_dib = { DEV_RF, 3, &rf_iors, { &rf70, NULL, &rf72 } };
UNIT rf_unit =
{ UDATA (&rf_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF+UNIT_AUTO,
RF_DKSIZE) };
REG rf_reg[] = {
{ ORDATA (STA, rf_sta, 18) },
{ ORDATA (DA, rf_da, 22) },
{ ORDATA (WC, M[RF_WC], 18) },
{ ORDATA (CA, M[RF_CA], 18) },
{ ORDATA (BUF, rf_dbuf, 18) },
{ FLDATA (INT, int_hwre[API_RF], INT_V_RF) },
{ BRDATA (WLK, rf_wlk, 8, 16, RF_NUMDK) },
{ DRDATA (TIME, rf_time, 24), PV_LEFT + REG_NZ },
{ FLDATA (BURST, rf_burst, 0) },
{ FLDATA (STOP_IOE, rf_stopioe, 0) },
{ DRDATA (CAPAC, rf_unit.capac, 31), PV_LEFT + REG_HRO },
{ ORDATA (DEVNO, rf_dib.dev, 6), REG_HRO },
{ NULL } };
MTAB rf_mod[] = {
{ UNIT_PLAT, (0 << UNIT_V_PLAT), NULL, "1P", &rf_set_size },
{ UNIT_PLAT, (1 << UNIT_V_PLAT), NULL, "2P", &rf_set_size },
{ UNIT_PLAT, (2 << UNIT_V_PLAT), NULL, "3P", &rf_set_size },
{ UNIT_PLAT, (3 << UNIT_V_PLAT), NULL, "4P", &rf_set_size },
{ UNIT_PLAT, (4 << UNIT_V_PLAT), NULL, "5P", &rf_set_size },
{ UNIT_PLAT, (5 << UNIT_V_PLAT), NULL, "6P", &rf_set_size },
{ UNIT_PLAT, (6 << UNIT_V_PLAT), NULL, "7P", &rf_set_size },
{ UNIT_PLAT, (7 << UNIT_V_PLAT), NULL, "8P", &rf_set_size },
{ UNIT_AUTO, UNIT_AUTO, "autosize", "AUTOSIZE", NULL },
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", &set_devno, &show_devno },
{ 0 } };
DEVICE rf_dev = {
"RF", &rf_unit, rf_reg, rf_mod,
1, 8, 21, 1, 8, 18,
NULL, NULL, &rf_reset,
NULL, &rf_attach, NULL,
&rf_dib, DEV_DISABLE };
/* IOT routines */
int32 rf70 (int32 pulse, int32 dat)
{
int32 t, sb;
sb = pulse & 060; /* subopcode */
if (pulse & 01) {
if ((sb == 000) && (rf_sta & (RFS_ERR | RFS_DON)))
dat = IOT_SKP | dat; /* DSSF */
else if (sb == 020) rf_reset (&rf_dev); /* DSCC */
else if (sb == 040) { /* DSCF */
if (RF_BUSY) rf_sta = rf_sta | RFS_PGE; /* busy inhibits */
else rf_sta = rf_sta & ~(RFS_FNC | RFS_IE); } /* clear func */
}
if (pulse & 02) {
if (RF_BUSY) rf_sta = rf_sta | RFS_PGE; /* busy sets PGE */
else if (sb == 000) dat = dat | rf_dbuf; /* DRBR */
else if (sb == 020) /* DRAL */
dat = dat | (rf_da & DMASK);
else if (sb == 040) /* DSFX */
rf_sta = rf_sta ^ (dat & (RFS_FNC | RFS_IE)); /* xor func */
else if (sb == 060) /* DRAH */
dat = dat | (rf_da >> 18) | ((rf_sta & RFS_NED)? 010: 0);
}
if (pulse & 04) {
if (RF_BUSY) rf_sta = rf_sta | RFS_PGE; /* busy sets PGE */
else if (sb == 000) rf_dbuf = dat & DMASK; /* DLBR */
else if (sb == 020) /* DLAL */
rf_da = (rf_da & ~DMASK) | (dat & DMASK);
else if (sb == 040) { /* DSCN */
rf_sta = rf_sta & ~RFS_DON; /* clear done */
if (GET_FNC (rf_sta) != FN_NOP) {
t = (rf_da & RF_WMASK) - GET_POS (rf_time); /* delta to new */
if (t < 0) t = t + RF_NUMWD; /* wrap around? */
sim_activate (&rf_unit, t * rf_time); } } /* schedule op */
else if (sb == 060) { /* DLAH */
rf_da = (rf_da & DMASK) | ((dat & 07) << 18);
if ((uint32) rf_da >= rf_unit.capac) /* for sizing */
rf_updsta (RFS_NED); }
}
rf_updsta (0); /* update status */
return dat;
}
int32 rf72 (int32 pulse, int32 dat)
{
int32 sb = pulse & 060;
if (pulse & 02) {
if (sb == 000) dat = dat | GET_POS (rf_time) | /* DLOK */
(sim_is_active (&rf_unit)? 0400000: 0);
else if (sb == 040) { /* DSCD */
if (RF_BUSY) rf_sta = rf_sta | RFS_PGE; /* busy inhibits */
else rf_sta = 0;
rf_updsta (0); }
else if (sb == 060) { /* DSRS */
if (RF_BUSY) rf_sta = rf_sta | RFS_PGE; /* busy sets PGE */
dat = dat | rf_updsta (0); }
}
return dat;
}
/* Unit service - assumes the entire disk is buffered */
t_stat rf_svc (UNIT *uptr)
{
int32 f, pa, d, t;
int32 *fbuf = uptr->filebuf;
if ((uptr->flags & UNIT_BUF) == 0) { /* not buf? abort */
rf_updsta (RFS_NED | RFS_DON); /* set nxd, done */
return IORETURN (rf_stopioe, SCPE_UNATT); }
f = GET_FNC (rf_sta); /* get function */
do { if ((uint32) rf_da >= uptr->capac) { /* disk overflow? */
rf_updsta (RFS_NED); /* nx disk error */
break; }
M[RF_WC] = (M[RF_WC] + 1) & DMASK; /* incr word count */
pa = M[RF_CA] = (M[RF_CA] + 1) & AMASK; /* incr mem addr */
if ((f == FN_READ) && MEM_ADDR_OK (pa)) /* read? */
M[pa] = fbuf[rf_da];
if ((f == FN_WCHK) && (M[pa] != fbuf[rf_da])) { /* write check? */
rf_updsta (RFS_WCE); /* flag error */
break; }
if (f == FN_WRITE) { /* write? */
d = (rf_da >> 18) & 07; /* disk */
t = (rf_da >> 14) & 017; /* track groups */
if ((rf_wlk[d] >> t) & 1) { /* write locked? */
rf_updsta (RFS_WLO);
break; }
else { /* not locked */
fbuf[rf_da] = M[pa]; /* write word */
if (((uint32) rf_da) >= uptr->hwmark) uptr->hwmark = rf_da + 1; } }
rf_da = rf_da + 1; /* incr disk addr */
}
while ((M[RF_WC] != 0) && (rf_burst != 0)); /* brk if wc, no brst */
if ((M[RF_WC] != 0) && ((rf_sta & RFS_ERR) == 0)) /* more to do? */
sim_activate (&rf_unit, rf_time); /* sched next */
else rf_updsta (RFS_DON);
return SCPE_OK;
}
/* Update status */
int32 rf_updsta (int32 new)
{
rf_sta = (rf_sta | new) & ~(RFS_ERR | RFS_CLR);
if (rf_sta & RFS_EFLGS) rf_sta = rf_sta | RFS_ERR;
if ((rf_sta & (RFS_ERR | RFS_DON)) && (rf_sta & RFS_IE))
SET_INT (RF);
else CLR_INT (RF);
return rf_sta;
}
/* Reset routine */
t_stat rf_reset (DEVICE *dptr)
{
rf_sta = rf_da = rf_dbuf = 0;
rf_updsta (0);
sim_cancel (&rf_unit);
return SCPE_OK;
}
/* IORS routine */
int32 rf_iors (void)
{
return ((rf_sta & (RFS_ERR | RFS_DON))? IOS_RF: 0);
}
/* Attach routine */
t_stat rf_attach (UNIT *uptr, char *cptr)
{
uint32 p, sz;
uint32 ds_bytes = RF_DKSIZE * sizeof (int32);
if ((uptr->flags & UNIT_AUTO) && (sz = sim_fsize (cptr))) {
p = (sz + ds_bytes - 1) / ds_bytes;
if (p >= RF_NUMDK) p = RF_NUMDK - 1;
uptr->flags = (uptr->flags & ~UNIT_PLAT) |
(p << UNIT_V_PLAT); }
uptr->capac = UNIT_GETP (uptr->flags) * RF_DKSIZE;
return attach_unit (uptr, cptr);
}
/* Change disk size */
t_stat rf_set_size (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (val < 0) return SCPE_IERR;
if (uptr->flags & UNIT_ATT) return SCPE_ALATT;
uptr->capac = UNIT_GETP (val) * RF_DKSIZE;
uptr->flags = uptr->flags & ~UNIT_AUTO;
return SCPE_OK;
}