simh-testsetgenerator/PDP8/pdp8_tsc.c
Bob Supnik 1da2d9452d Notes For V3.1-0
RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially
debugged.  Do NOT enable these features for normal operations.

1. New Features in 3.1-0

1.1 SCP and libraries

- Added simulated Ethernet support for VMS, FreeBSD, Mac OS/X.
- Added status return to tmxr_putc_ln.
- Added sim_putchar_s to handle possible output stalls.

1.2 All DECtapes

- Added "DECtape off reel" error stop.

1.3 All Asynchronous Consoles

- Added support for output congestion stall if using a Telnet connection.

1.4 PDP-1

- Added Type 23 parallel drum support.

1.5 PDP-8

- Added instruction history.
- Added TSC8-75 option support for ETOS.
- Added TD8E DECtape support.

1.6 PDP-18b

- Added instruction history.
- Changed PDP-9, PDP-15 API default to enabled.

1.7 PDP-11

- Added support for 18b only Qbus devices.
- Formalized bus and addressing definitions.
- Added control to enable/disable autoconfiguration.
- Added stub support for second Unibus Ethernet controller.

1.7 Interdata 32b

- Added instruction history.

1.8 Eclipse

- Added floating point support.
- Added programmable interval timer support.

1.9 H316

- Added DMA/DMC support.
- Added fixed head disk support.
- Added moving head disk support.
- Added magtape support.

1.10 IBM 1130 (Brian Knittel)

- Added support for physical card reader, using the Cardread
interface (www.ibm1130.org/sim/downloads).
- Added support for physical printer (flushes output buffer after
each line).

2. Bugs Fixed in 3.1-0

2.1 SCP and libraries

- Fixed numerous bugs in Ethernet library.

2.2 All DECtapes

- Fixed reverse checksum value in 'read all' mode.
- Simplified (and sped up) timing.

2.3 PDP-8

- Fixed bug in RX28 read status (found by Charles Dickman).
- Fixed RX28 double density write.

2.4 PDP-18b

- Fixed autoincrement bug in PDP-4, PDP-7, PDP-9.

2.5 PDP-11/VAX

- Revised RQ MB->LBN conversion for greater accuracy.
- Fixed bug in IO configuration (found by David Hittner).
- Fixed bug with multiple RQ RAUSER drives.
- Fixed bug in second Qbus Ethernet controller interrupts.

2.6 Nova/Eclipse

- Fixed bugs in DKP flag clear, map setup, map usage (Charles Owen).
- Fixed bug in MT, reset completes despite I/O reset (Charles Owen).
- Fixed bug in MT, space operations return word count (Charles Owen).

2.7 IBM 1130 (Brian Knittel)

- Fixed bug in setting carry bit in subtract and subtract double.
- Fixed timing problem in console printer simulation.

2.8 1620

- Fixed bug in branch digit (found by Dave Babcock).

3. New Features in 3.0 vs prior releases

3.1 SCP and Libraries

- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support.

3.2 All magtapes

- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
  the -F switch.

3.3 VAX

- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
  files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).

3.4 PDP-1

- Added block loader format support to LOAD.
- Changed BOOT PTR to allow loading of all of the first bank of memory.
- The LOAD command takes an optional argument specifying the memory field
  to be loaded.
- The PTR BOOT command takes its starting memory field from the TA (address
  switch) register.

3.5 PDP-18b Family

- Added PDP-4 EAE support.
- Added PDP-15 FP15 support.
- Added PDP-15 XVM support.
- Added PDP-15 "re-entrancy ECO".
- Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR.

4. Bugs Fixed in 3.0 vs prior releases

4.1 SCP and Libraries

- Fixed end of file problem in dep, idep.
- Fixed handling of trailing spaces in dep, idep.

4.2 VAX

- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
  o First and second operands reversed
  o Separated fraction received wrong exponent
  o Overflow calculation on separated integer incorrect
  o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
  fast host processors (fixes from Mark Pizzolato).
- Fixed bug in user disk size (found by Chaskiel M Grundman).

4.3 1401

- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
- Revised fetch to model hardware more closely.
- Fixed tape read end-of-record handling based on real 1401.
- Added diagnostic read (space forward).

4.4 Nova

- Fixed DSK variable size interaction with restore.
- Fixed bug in DSK set size routine.

4.5 PDP-1

- Fixed DT variable size interaction with restore.
- Updated CPU, line printer, standard devices to detect indefinite I/O wait.
- Fixed incorrect logical, missing activate, break in drum simulator.
- Fixed bugs in instruction decoding, overprinting for line printer.
- Fixed system hang if continue after PTR error.
- Fixed PTR to start/stop on successive rpa instructions.

4.6 PDP-11

- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
  o Corrected XQ interrupts on IE state transition (code by Tom Evans).
  o Added XQ interrupt clear on soft reset.
  o Removed XQ interrupt when setting XL or RL (multiple people).
  o Added SET/SHOW XQ STATS.
  o Added SHOW XQ FILTERS.
  o Added ability to split received packet into multiple buffers.
  o Added explicit runt and giant packet processing.
- Fixed bug in user disk size (found by Chaskiel M Grundman).

4.7 PDP-18B

- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
- Fixed bug in PDP-4 line printer overprinting.
- Fixed bug in PDP-15 memory protect/skip interaction.
- Fixed bug in RF set size routine.
- Increased PTP TIME for PDP-15 operating systems.
- Fixed priorities in PDP-15 API (differs from PDP-9).
- Fixed sign handling in PDP-15 EAE unsigned mul/div (differs from PDP-9).
- Fixed bug in CAF, clears API subsystem.

4.8 PDP-8

- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
- Fixed bug in DF, RF set size routine.

4.9 HP2100

- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
- Fixed DR drum sizes.
- Fixed DR variable capacity interaction with SAVE/RESTORE.

4.10 GRI

- Fixed bug in SC queue pointer management.

4.11 PDP-10

- Fixed bug in RP read header.

4.12 Ibm1130

- Fixed bugs found by APL 1130.

4.13 Altairz80

- Fixed bug in real-time clock on Windows host.

4.14 1620

- Fixed bug in immediate index add (found by Michael Short).
2011-04-15 08:34:20 -07:00

143 lines
4.5 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* pdp8_tsc.c: PDP-8 ETOS timesharing option board (TSC8-75)
Copyright (c) 2003, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
This module is based on Bernhard Baehr's PDP-8/E simulator
PDP-8/E Simulator Source Code
Copyright ) 2001-2003 Bernhard Baehr
TSC8iots.c - IOTs for the TSC8-75 Board plugin
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
tsc TSC8-75 option board
*/
#include "pdp8_defs.h"
extern int32 int_req;
extern int32 SF;
extern int32 tsc_ir; /* "ERIOT" */
extern int32 tsc_pc; /* "ERTB" */
extern int32 tsc_cdf; /* "ECDF" */
extern int32 tsc_enb; /* enable */
#define UNIT_V_SN699 (UNIT_V_UF + 0) /* SN 699 or above */
#define UNIT_SN699 (1 << UNIT_V_SN699)
DEVICE tsc_dev;
int32 tsc (int32 IR, int32 AC);
t_stat tsc_reset (DEVICE *dptr);
/* TSC data structures
tsc_dev TSC device descriptor
tsc_unit TSC unit descriptor
tsc_reg TSC register list
*/
DIB tsc_dib = { DEV_TSC, 1, { &tsc } };
UNIT tsc_unit = { UDATA (NULL, UNIT_SN699, 0) };
REG tsc_reg[] = {
{ ORDATA (IR, tsc_ir, 12) },
{ ORDATA (PC, tsc_pc, 12) },
{ FLDATA (CDF, tsc_cdf, 0) },
{ FLDATA (ENB, tsc_enb, 0) },
{ FLDATA (INT, int_req, INT_V_TSC) },
{ NULL } };
MTAB tsc_mod[] = {
{ UNIT_SN699, UNIT_SN699, "ESME", "ESME", NULL },
{ UNIT_SN699, 0, "no ESME", "NOESME", NULL },
{ 0 } };
DEVICE tsc_dev = {
"TSC", &tsc_unit, tsc_reg, tsc_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &tsc_reset,
NULL, NULL, NULL,
&tsc_dib, DEV_DISABLE | DEV_DIS };
/* IOT routine */
int32 tsc (int32 IR, int32 AC)
{
switch (IR & 07) { /* decode IR<9:11> */
case 0: /* ETDS */
tsc_enb = 0; /* disable int req */
int_req = int_req & ~INT_TSC; /* clear flag */
break;
case 1: /* ESKP */
return (int_req & INT_TSC)? IOT_SKP + AC: AC; /* skip on int req */
case 2: /* ECTF */
int_req = int_req & ~INT_TSC; /* clear int req */
break;
case 3: /* ECDF */
AC = AC | ((tsc_ir >> 3) & 07); /* read "ERIOT"<6:8> */
if (tsc_cdf) AC = AC | IOT_SKP; /* if cdf, skip */
tsc_cdf = 0;
break;
case 4: /* ERTB */
return tsc_pc;
case 5: /* ESME */
if (tsc_unit.flags & UNIT_SN699) { /* enabled? */
if (tsc_cdf && ((tsc_ir & 070) >> 3) == (SF & 07)) {
AC = AC | IOT_SKP;
tsc_cdf = 0; } }
break;
case 6: /* ERIOT */
return tsc_ir;
case 7: /* ETEN */
tsc_enb = 1;
break; } /* end switch */
return AC;
}
/* Reset routine */
t_stat tsc_reset (DEVICE *dptr)
{
tsc_ir = 0;
tsc_pc = 0;
tsc_cdf = 0;
tsc_enb = 0;
int_req = int_req & ~INT_TSC;
return SCPE_OK;
}