simh-testsetgenerator/sim_tmxr.c
Bob Supnik 1da2d9452d Notes For V3.1-0
RESTRICTION: The FP15 and XVM features of the PDP-15 are only partially
debugged.  Do NOT enable these features for normal operations.

1. New Features in 3.1-0

1.1 SCP and libraries

- Added simulated Ethernet support for VMS, FreeBSD, Mac OS/X.
- Added status return to tmxr_putc_ln.
- Added sim_putchar_s to handle possible output stalls.

1.2 All DECtapes

- Added "DECtape off reel" error stop.

1.3 All Asynchronous Consoles

- Added support for output congestion stall if using a Telnet connection.

1.4 PDP-1

- Added Type 23 parallel drum support.

1.5 PDP-8

- Added instruction history.
- Added TSC8-75 option support for ETOS.
- Added TD8E DECtape support.

1.6 PDP-18b

- Added instruction history.
- Changed PDP-9, PDP-15 API default to enabled.

1.7 PDP-11

- Added support for 18b only Qbus devices.
- Formalized bus and addressing definitions.
- Added control to enable/disable autoconfiguration.
- Added stub support for second Unibus Ethernet controller.

1.7 Interdata 32b

- Added instruction history.

1.8 Eclipse

- Added floating point support.
- Added programmable interval timer support.

1.9 H316

- Added DMA/DMC support.
- Added fixed head disk support.
- Added moving head disk support.
- Added magtape support.

1.10 IBM 1130 (Brian Knittel)

- Added support for physical card reader, using the Cardread
interface (www.ibm1130.org/sim/downloads).
- Added support for physical printer (flushes output buffer after
each line).

2. Bugs Fixed in 3.1-0

2.1 SCP and libraries

- Fixed numerous bugs in Ethernet library.

2.2 All DECtapes

- Fixed reverse checksum value in 'read all' mode.
- Simplified (and sped up) timing.

2.3 PDP-8

- Fixed bug in RX28 read status (found by Charles Dickman).
- Fixed RX28 double density write.

2.4 PDP-18b

- Fixed autoincrement bug in PDP-4, PDP-7, PDP-9.

2.5 PDP-11/VAX

- Revised RQ MB->LBN conversion for greater accuracy.
- Fixed bug in IO configuration (found by David Hittner).
- Fixed bug with multiple RQ RAUSER drives.
- Fixed bug in second Qbus Ethernet controller interrupts.

2.6 Nova/Eclipse

- Fixed bugs in DKP flag clear, map setup, map usage (Charles Owen).
- Fixed bug in MT, reset completes despite I/O reset (Charles Owen).
- Fixed bug in MT, space operations return word count (Charles Owen).

2.7 IBM 1130 (Brian Knittel)

- Fixed bug in setting carry bit in subtract and subtract double.
- Fixed timing problem in console printer simulation.

2.8 1620

- Fixed bug in branch digit (found by Dave Babcock).

3. New Features in 3.0 vs prior releases

3.1 SCP and Libraries

- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support.

3.2 All magtapes

- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
  the -F switch.

3.3 VAX

- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
  files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).

3.4 PDP-1

- Added block loader format support to LOAD.
- Changed BOOT PTR to allow loading of all of the first bank of memory.
- The LOAD command takes an optional argument specifying the memory field
  to be loaded.
- The PTR BOOT command takes its starting memory field from the TA (address
  switch) register.

3.5 PDP-18b Family

- Added PDP-4 EAE support.
- Added PDP-15 FP15 support.
- Added PDP-15 XVM support.
- Added PDP-15 "re-entrancy ECO".
- Added PDP-7, PDP-9, PDP-15 hardware RIM loader support in BOOT PTR.

4. Bugs Fixed in 3.0 vs prior releases

4.1 SCP and Libraries

- Fixed end of file problem in dep, idep.
- Fixed handling of trailing spaces in dep, idep.

4.2 VAX

- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
  o First and second operands reversed
  o Separated fraction received wrong exponent
  o Overflow calculation on separated integer incorrect
  o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
  fast host processors (fixes from Mark Pizzolato).
- Fixed bug in user disk size (found by Chaskiel M Grundman).

4.3 1401

- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
- Revised fetch to model hardware more closely.
- Fixed tape read end-of-record handling based on real 1401.
- Added diagnostic read (space forward).

4.4 Nova

- Fixed DSK variable size interaction with restore.
- Fixed bug in DSK set size routine.

4.5 PDP-1

- Fixed DT variable size interaction with restore.
- Updated CPU, line printer, standard devices to detect indefinite I/O wait.
- Fixed incorrect logical, missing activate, break in drum simulator.
- Fixed bugs in instruction decoding, overprinting for line printer.
- Fixed system hang if continue after PTR error.
- Fixed PTR to start/stop on successive rpa instructions.

4.6 PDP-11

- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
  o Corrected XQ interrupts on IE state transition (code by Tom Evans).
  o Added XQ interrupt clear on soft reset.
  o Removed XQ interrupt when setting XL or RL (multiple people).
  o Added SET/SHOW XQ STATS.
  o Added SHOW XQ FILTERS.
  o Added ability to split received packet into multiple buffers.
  o Added explicit runt and giant packet processing.
- Fixed bug in user disk size (found by Chaskiel M Grundman).

4.7 PDP-18B

- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
- Fixed bug in PDP-4 line printer overprinting.
- Fixed bug in PDP-15 memory protect/skip interaction.
- Fixed bug in RF set size routine.
- Increased PTP TIME for PDP-15 operating systems.
- Fixed priorities in PDP-15 API (differs from PDP-9).
- Fixed sign handling in PDP-15 EAE unsigned mul/div (differs from PDP-9).
- Fixed bug in CAF, clears API subsystem.

4.8 PDP-8

- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
- Fixed bug in DF, RF set size routine.

4.9 HP2100

- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
- Fixed DR drum sizes.
- Fixed DR variable capacity interaction with SAVE/RESTORE.

4.10 GRI

- Fixed bug in SC queue pointer management.

4.11 PDP-10

- Fixed bug in RP read header.

4.12 Ibm1130

- Fixed bugs found by APL 1130.

4.13 Altairz80

- Fixed bug in real-time clock on Windows host.

4.14 1620

- Fixed bug in immediate index add (found by Michael Short).
2011-04-15 08:34:20 -07:00

491 lines
15 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* sim_tmxr.c: Telnet terminal multiplexor library
Copyright (c) 2001-2003, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
Based on the original DZ11 simulator by Thord Nilson, as updated by
Arthur Krewat.
01-Nov-03 RMS Cleaned up attach routine
09-Mar-03 RMS Fixed bug in SHOW CONN
22-Dec-02 RMS Fixed bugs in IAC+IAC receive and transmit sequences
Added support for received break (all from by Mark Pizzolato)
Fixed bug in attach
31-Oct-02 RMS Fixed bug in 8b (binary) support
22-Aug-02 RMS Added tmxr_open_master, tmxr_close_master
30-Dec-01 RMS Added tmxr_fstats, tmxr_dscln, renamed tmxr_fstatus
03-Dec-01 RMS Changed tmxr_fconns for extended SET/SHOW
20-Oct-01 RMS Fixed bugs in read logic (found by Thord Nilson).
Added tmxr_rqln, tmxr_tqln
*/
#include "sim_defs.h"
#include "sim_sock.h"
#include "sim_tmxr.h"
#include <ctype.h>
/* Telnet protocol constants - negatives are for init'ing signed char data */
#define TN_IAC -1 /* protocol delim */
#define TN_DONT -2 /* dont */
#define TN_DO -3 /* do */
#define TN_WONT -4 /* wont */
#define TN_WILL -5 /* will */
#define TN_BRK -13 /* break */
#define TN_BIN 0 /* bin */
#define TN_ECHO 1 /* echo */
#define TN_SGA 3 /* sga */
#define TN_LINE 34 /* line mode */
#define TN_CR 015 /* carriage return */
/* Telnet line states */
#define TNS_NORM 000 /* normal */
#define TNS_IAC 001 /* IAC seen */
#define TNS_WILL 002 /* WILL seen */
#define TNS_WONT 003 /* WONT seen */
#define TNS_SKIP 004 /* skip next */
void tmxr_rmvrc (TMLN *lp, int32 p);
extern int32 sim_switches;
extern char sim_name[];
extern FILE *sim_log;
extern uint32 sim_os_msec (void);
/* Poll for new connection
Called from unit service routine to test for new connection
Inputs:
*mp = pointer to terminal multiplexor descriptor
Outputs:
line number activated, -1 if none
*/
int32 tmxr_poll_conn (TMXR *mp)
{
SOCKET newsock;
TMLN *lp;
int32 i;
uint32 ipaddr;
static char mantra[] = {
TN_IAC, TN_WILL, TN_LINE,
TN_IAC, TN_WILL, TN_SGA,
TN_IAC, TN_WILL, TN_ECHO,
TN_IAC, TN_WILL, TN_BIN,
TN_IAC, TN_DO, TN_BIN };
newsock = sim_accept_conn (mp->master, &ipaddr); /* poll connect */
if (newsock != INVALID_SOCKET) { /* got a live one? */
for (i = 0; i < mp->lines; i++) { /* find avail line */
lp = mp->ldsc[i]; /* ptr to ln desc */
if (lp->conn == 0) break; } /* available? */
if (i >= mp->lines) { /* all busy? */
tmxr_msg (newsock, "All connections busy\r\n");
sim_close_sock (newsock, 0); }
else {
lp = mp->ldsc[i]; /* get line desc */
lp->conn = newsock; /* record connection */
lp->ipad = ipaddr; /* ip address */
lp->cnms = sim_os_msec (); /* time of conn */
lp->rxbpr = lp->rxbpi = 0; /* init buf pointers */
lp->txbpr = lp->txbpi = 0;
lp->rxcnt = lp->txcnt = 0; /* init counters */
lp->tsta = 0; /* init telnet state */
lp->xmte = 1; /* enable transmit */
lp->dstb = 0; /* default bin mode */
sim_write_sock (newsock, mantra, 15);
tmxr_msg (newsock, "\n\r\nConnected to the ");
tmxr_msg (newsock, sim_name);
tmxr_msg (newsock, " simulator\r\n\n");
return i; }
} /* end if newsock */
return -1;
}
/* Reset line */
void tmxr_reset_ln (TMLN *lp)
{
sim_close_sock (lp->conn, 0); /* reset conn */
lp->conn = lp->tsta = 0; /* reset state */
lp->rxbpr = lp->rxbpi = 0;
lp->txbpr = lp->txbpi = 0;
lp->xmte = 1;
lp->dstb = 0;
return;
}
/* Get character from specific line
Inputs:
*lp = pointer to terminal line descriptor
Output:
valid + char, 0 if line
*/
int32 tmxr_getc_ln (TMLN *lp)
{
int32 j, val = 0;
uint32 tmp;
if (lp->conn && lp->rcve) { /* conn & enb? */
j = lp->rxbpi - lp->rxbpr; /* # input chrs */
if (j) { /* any? */
tmp = lp->rxb[lp->rxbpr]; /* get char */
val = TMXR_VALID | (tmp & 0377); /* valid + chr */
if (lp->rbr[lp->rxbpr]) val = val | SCPE_BREAK; /* break? */
lp->rxbpr = lp->rxbpr + 1; } /* adv pointer */
} /* end if conn */
if (lp->rxbpi == lp->rxbpr) /* empty? zero ptrs */
lp->rxbpi = lp->rxbpr = 0;
return val;
}
/* Poll for input
Inputs:
*mp = pointer to terminal multiplexor descriptor
Outputs: none
*/
void tmxr_poll_rx (TMXR *mp)
{
int32 i, nbytes, j;
TMLN *lp;
for (i = 0; i < mp->lines; i++) { /* loop thru lines */
lp = mp->ldsc[i]; /* get line desc */
if (!lp->conn || !lp->rcve) continue; /* skip if !conn */
nbytes = 0;
if (lp->rxbpi == 0) /* need input? */
nbytes = sim_read_sock (lp->conn, /* yes, read */
&(lp->rxb[lp->rxbpi]), /* leave spc for */
TMXR_MAXBUF - TMXR_GUARD); /* Telnet cruft */
else if (lp->tsta) /* in Telnet seq? */
nbytes = sim_read_sock (lp->conn, /* yes, read to end */
&(lp->rxb[lp->rxbpi]),
TMXR_MAXBUF - lp->rxbpi);
if (nbytes < 0) tmxr_reset_ln (lp); /* closed? reset ln */
else if (nbytes > 0) { /* if data rcvd */
j = lp->rxbpi; /* start of data */
memset (&lp->rbr[j], 0, nbytes); /* clear status */
lp->rxbpi = lp->rxbpi + nbytes; /* adv pointers */
lp->rxcnt = lp->rxcnt + nbytes;
/* Examine new data, remove TELNET cruft before making input available */
for (; j < lp->rxbpi; ) { /* loop thru char */
char tmp = lp->rxb[j]; /* get char */
switch (lp->tsta) { /* case tlnt state */
case TNS_NORM: /* normal */
if (tmp == TN_IAC) { /* IAC? */
lp->tsta = TNS_IAC; /* change state */
tmxr_rmvrc (lp, j); /* remove char */
break; }
if ((tmp == TN_CR) && lp->dstb) /* CR, no bin */
lp->tsta = TNS_SKIP; /* skip next */
j = j + 1; /* advance j */
break;
case TNS_IAC: /* IAC prev */
if ((tmp == TN_IAC) & !lp->dstb) { /* IAC + IAC, bin? */
lp->tsta = TNS_NORM; /* treat as normal */
j = j + 1; /* advance j */
break; } /* keep IAC */
if (tmp == TN_BRK) { /* IAC + BRK? */
lp->tsta = TNS_NORM; /* treat as normal */
lp->rxb[j] = 0; /* char is null */
lp->rbr[j] = 1; /* flag break */
j = j + 1; /* advance j */
break; }
if (tmp == TN_WILL) /* IAC + WILL? */
lp->tsta = TNS_WILL;
else if (tmp == TN_WONT) /* IAC + WONT? */
lp->tsta = TNS_WONT;
else lp->tsta = TNS_SKIP; /* IAC + other */
tmxr_rmvrc (lp, j); /* remove char */
break;
case TNS_WILL: case TNS_WONT: /* IAC+WILL/WONT prev */
if (tmp == TN_BIN) { /* BIN? */
if (lp->tsta == TNS_WILL) lp->dstb = 0;
else lp->dstb = 1; }
case TNS_SKIP: default: /* skip char */
lp->tsta = TNS_NORM; /* next normal */
tmxr_rmvrc (lp, j); /* remove char */
break; } /* end case state */
} /* end for char */
} /* end else nbytes */
} /* end for lines */
for (i = 0; i < mp->lines; i++) { /* loop thru lines */
lp = mp->ldsc[i]; /* get line desc */
if (lp->rxbpi == lp->rxbpr) /* if buf empty, */
lp->rxbpi = lp->rxbpr = 0; /* reset pointers */
} /* end for */
return;
}
/* Return count of available characters for line */
int32 tmxr_rqln (TMLN *lp)
{
return (lp->rxbpi - lp->rxbpr);
}
/* Remove character p (and matching status) from line l input buffer */
void tmxr_rmvrc (TMLN *lp, int32 p)
{
for ( ; p < lp->rxbpi; p++) {
lp->rxb[p] = lp->rxb[p + 1];
lp->rbr[p] = lp->rbr[p + 1]; }
lp->rxbpi = lp->rxbpi - 1;
return;
}
/* Store character in line buffer
Inputs:
*lp = pointer to line descriptor
chr = characters
Outputs:
status = ok, connection lost, or stall
*/
t_stat tmxr_putc_ln (TMLN *lp, int32 chr)
{
if (lp->conn == 0) return SCPE_LOST; /* no conn? lost */
if (lp->txbpi < (TMXR_MAXBUF - 1)) { /* room for char (+ IAC)? */
lp->txb[lp->txbpi] = (char) chr; /* buffer char */
lp->txbpi = lp->txbpi + 1; /* adv pointer */
if ((char) chr == TN_IAC) { /* IAC? */
lp->txb[lp->txbpi] = (char) chr; /* IAC + IAC */
lp->txbpi = lp->txbpi + 1; } /* adv pointer */
if (lp->txbpi > (TMXR_MAXBUF - TMXR_GUARD)) /* near full? */
lp->xmte = 0; /* disable line */
return SCPE_OK; } /* char sent */
lp->xmte = 0; /* no room, dsbl line */
return SCPE_STALL; /* char not sent */
}
/* Poll for output
Inputs:
*mp = pointer to terminal multiplexor descriptor
Outputs:
none
*/
void tmxr_poll_tx (TMXR *mp)
{
int32 i, nbytes, sbytes;
TMLN *lp;
for (i = 0; i < mp->lines; i++) { /* loop thru lines */
lp = mp->ldsc[i]; /* get line desc */
if (lp->conn == 0) continue; /* skip if !conn */
nbytes = lp->txbpi - lp->txbpr; /* avail bytes */
if (nbytes) { /* >0? write */
sbytes = sim_write_sock (lp->conn,
&(lp->txb[lp->txbpr]), nbytes);
if (sbytes != SOCKET_ERROR) { /* update ptrs */
lp->txbpr = lp->txbpr + sbytes;
lp->txcnt = lp->txcnt + sbytes;
nbytes = nbytes - sbytes; }
}
if (nbytes == 0) { /* buf empty? */
lp->xmte = 1; /* enable this line */
lp->txbpr = lp->txbpi = 0; }
} /* end for */
return;
}
/* Return count of buffered characters for line */
int32 tmxr_tqln (TMLN *lp)
{
return (lp->txbpi - lp->txbpr);
}
/* Open master socket */
t_stat tmxr_open_master (TMXR *mp, char *cptr)
{
int32 i, port;
SOCKET sock;
TMLN *lp;
t_stat r;
port = (int32) get_uint (cptr, 10, 65535, &r); /* get port */
if ((r != SCPE_OK) || (port == 0)) return SCPE_ARG;
sock = sim_master_sock (port); /* make master socket */
if (sock == INVALID_SOCKET) return SCPE_OPENERR; /* open error */
printf ("Listening on port %d (socket %d)\n", port, sock);
if (sim_log) fprintf (sim_log,
"Listening on port %d (socket %d)\n", port, sock);
mp->port = port; /* save port */
mp->master = sock; /* save master socket */
for (i = 0; i < mp->lines; i++) { /* initialize lines */
lp = mp->ldsc[i];
lp->conn = lp->tsta = 0;
lp->rxbpi = lp->rxbpr = 0;
lp->txbpi = lp->txbpr = 0;
lp->rxcnt = lp->txcnt = 0;
lp->xmte = 1;
lp->dstb = 0; }
return SCPE_OK;
}
/* Attach unit to master socket */
t_stat tmxr_attach (TMXR *mp, UNIT *uptr, char *cptr)
{
char* tptr;
t_stat r;
tptr = malloc (strlen (cptr) + 1); /* get string buf */
if (tptr == NULL) return SCPE_MEM; /* no more mem? */
r = tmxr_open_master (mp, cptr); /* open master socket */
if (r != SCPE_OK) { /* error? */
free (tptr); /* release buf */
return SCPE_OPENERR; }
strcpy (tptr, cptr); /* copy port */
uptr->filename = tptr; /* save */
uptr->flags = uptr->flags | UNIT_ATT; /* no more errors */
return SCPE_OK;
}
/* Close master socket */
t_stat tmxr_close_master (TMXR *mp)
{
int32 i;
TMLN *lp;
for (i = 0; i < mp->lines; i++) { /* loop thru conn */
lp = mp->ldsc[i];
if (lp->conn) {
tmxr_msg (lp->conn, "\r\nDisconnected from the ");
tmxr_msg (lp->conn, sim_name);
tmxr_msg (lp->conn, " simulator\r\n\n");
tmxr_reset_ln (lp); } /* end if conn */
} /* end for */
sim_close_sock (mp->master, 1); /* close master socket */
mp->master = 0;
return SCPE_OK;
}
/* Detach unit from master socket */
t_stat tmxr_detach (TMXR *mp, UNIT *uptr)
{
if (!(uptr->flags & UNIT_ATT)) return SCPE_OK; /* attached? */
tmxr_close_master (mp); /* close master socket */
free (uptr->filename); /* free port string */
uptr->filename = NULL;
uptr->flags = uptr->flags & ~UNIT_ATT; /* not attached */
return SCPE_OK;
}
/* Stub examine and deposit */
t_stat tmxr_ex (t_value *vptr, t_addr addr, UNIT *uptr, int32 sw)
{
return SCPE_NOFNC;
}
t_stat tmxr_dep (t_value val, t_addr addr, UNIT *uptr, int32 sw)
{
return SCPE_NOFNC;
}
/* Output message */
void tmxr_msg (SOCKET sock, char *msg)
{
if (sock) sim_write_sock (sock, msg, strlen (msg));
return;
}
/* Print connections - used only in named SHOW command */
void tmxr_fconns (FILE *st, TMLN *lp, int32 ln)
{
if (ln >= 0) fprintf (st, "line %d: ", ln);
if (lp->conn) {
int32 o1, o2, o3, o4, hr, mn, sc;
uint32 ctime;
o1 = (lp->ipad >> 24) & 0xFF;
o2 = (lp->ipad >> 16) & 0xFF;
o3 = (lp->ipad >> 8) & 0xFF;
o4 = (lp->ipad) & 0xFF;
ctime = (sim_os_msec () - lp->cnms) / 1000;
hr = ctime / 3600;
mn = (ctime / 60) % 60;
sc = ctime % 60;
fprintf (st, "IP address %d.%d.%d.%d", o1, o2, o3, o4);
if (ctime) fprintf (st, ", connected %02d:%02d:%02d\n", hr, mn, sc); }
else fprintf (st, "line disconnected\n");
return;
}
/* Print statistics - used only in named SHOW command */
void tmxr_fstats (FILE *st, TMLN *lp, int32 ln)
{
static const char *enab = "on";
static const char *dsab = "off";
if (ln >= 0) fprintf (st, "line %d: ", ln);
if (lp->conn) {
fprintf (st, "input (%s) queued/total = %d/%d, ",
(lp->rcve? enab: dsab),
lp->rxbpi - lp->rxbpr, lp->rxcnt);
fprintf (st, "output (%s) queued/total = %d/%d\n",
(lp->xmte? enab: dsab),
lp->txbpi - lp->txbpr, lp->txcnt); }
else fprintf (st, "line disconnected\n");
return;
}
/* Disconnect line */
t_stat tmxr_dscln (UNIT *uptr, int32 val, char *cptr, void *desc)
{
TMXR *mp = (TMXR *) desc;
TMLN *lp;
int32 ln;
t_stat r;
if ((mp == NULL) || (val && (cptr == NULL))) return SCPE_ARG;
if (cptr) {
ln = (int32) get_uint (cptr, 10, mp->lines - 1, &r);
if (r != SCPE_OK) return SCPE_ARG; }
else ln = 0;
lp = mp->ldsc[ln];
if (lp->conn) {
tmxr_msg (lp->conn, "\r\nOperator disconnected line\r\n\n");
tmxr_reset_ln (lp); }
return SCPE_OK;
}