folkert/simh-testsetgenerator
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
simh-testsetgenerator/makefile
Mark Pizzolato bc36e9dde5 Adds serial port support to the multiplexer library. 
It also modifies the HP 2100 and PDP11 multiplexers to add serial support as demonstrations of the capability that, one day, might be extended to all simulators.  I have tested the HP support, but I relied on Holger Veit to test the DEC stuff, so I can't guarantee that it works.  I also relied on Holger to test under Linux, so the same caveat applies.

    The changes needed in the device simulators are relatively small.  For example, if you look at the patches for "hp2100_baci.c", you'll note that most of them are documentation changes.  The only things of note are:

 - an expansion of the TMXR initializer

 - additional code in the "attach" routine to try attaching a serial port
   if attaching a socket fails

 - additional code in the "detach" routine for the same reasons

The HP MPX device (hp2100_mpx.c) needs a tiny bit of additional support from the ATTACH and DETACH commands.  Specifically, SCP was modified to set a flag ("sim_unit_ref") to indicate whether ATTACH MPX or ATTACH MPX0 was done, i.e., to differentiate between a device and a unit attach (recall that SCP treats these as both referring to unit 0).  This is needed because the socket attaches (logically) to the device, whereas a serial port attaches to a line.  Without this flag, the attach routine cannot differentiate between ATTACH MPX and ATTACH MPX0, as the distinction is lost by the time the VM's attach routine is called.  This support isn't needed for the HP MUX device because the socket attaches to a different device than the lines do.

    MPX also requires a bit more work due to the capability to mix serial and Telnet lines on the same multiplexer (BACI is a single-line terminal device).

    The attached PDF contains revisions to the "Writing a Simulator for the SIMH System" publication that documents the additions and changes to the multiplexer library for serial port support.  User documentation for serial port support currently exists only in the initial comments in "sim_tmxr.c"; I will add the appropriate text to the "SIMH User's Guide" if we decide to add this to the release version.
2012-04-19 19:18:15 -07:00

800 lines
28 KiB
Makefile
Raw Blame History

#
# This GNU make makefile has been tested on:
# Linux (x86 & Sparc)
# OS X
# Solaris (x86 & Sparc)
# OpenBSD
# NetBSD
# FreeBSD
# Windows (MinGW & cygwin)
# Linux x86 targeting Android (using agcc script)
#
# Android targeted builds should invoke GNU make with GCC=agcc on
# the command line.
#
# In general, the logic below will detect and build with the available
# features which the host build environment provides.
#
# Dynamic loading of libpcap is the default behavior if pcap.h is
# available at build time. Direct calls to libpcap can be enabled
# if GNU make is invoked with USE_NETWORK=1 on the command line.
#
# The default build will build compiler optimized binaries.
# If debugging is desired, then GNU make can be invoked with
# DEBUG=1 on the command line.
#
# Internal ROM support can be disabled if GNU make is invoked with
# DONT_USE_ROMS=1 on the command line.
#
# Asynchronous I/O support can be disabled if GNU make is invoked with
# NOASYNCH=1 on the command line.
#
# CC Command (and platform available options). (Poor man's autoconf)
#
# building the pdp11, or any vax simulator could use networking support
BUILD_SINGLE := $(MAKECMDGOALS) $(BLANK_SUFFIX)
ifneq (,$(or $(findstring pdp11,$(MAKECMDGOALS)),$(findstring vax,$(MAKECMDGOALS)),$(findstring all,$(MAKECMDGOALS))))
NETWORK_USEFUL = true
ifneq (,$(findstring all,$(MAKECMDGOALS))$(word 2,$(MAKECMDGOALS)))
BUILD_MULTIPLE = s
endif
else
ifeq ($(MAKECMDGOALS),)
# default target is all
NETWORK_USEFUL = true
BUILD_MULTIPLE = s
BUILD_SINGLE := all $(BUILD_SINGLE)
endif
endif
ifeq ($(WIN32),) #*nix Environments (&& cygwin)
ifeq ($(GCC),)
GCC = gcc
endif
OSTYPE = $(shell uname)
# OSNAME is used in messages to indicate the source of libpcap components
OSNAME = $(OSTYPE)
ifeq (SunOS,$(OSTYPE))
TEST = /bin/test
else
TEST = test
endif
ifeq (CYGWIN,$(findstring CYGWIN,$(OSTYPE))) # uname returns CYGWIN_NT-n.n-ver
OSTYPE = cygwin
OSNAME = windows-build
endif
GCC_VERSION = $(shell $(GCC) -v /dev/null 2>&1 | grep 'gcc version' | awk '{ print $$3 }')
LTO_EXCLUDE_VERSIONS =
PCAPLIB = pcap
ifeq (agcc,$(findstring agcc,$(GCC))) # Android target build?
OS_CCDEFS = -D_GNU_SOURCE
ifeq (,$(NOASYNCH))
OS_CCDEFS += -DSIM_ASYNCH_IO
endif
OS_LDFLAGS = -lm
else # Non-Android Builds
INCPATH:=/usr/include
LIBPATH:=/usr/lib
OS_CCDEFS = -D_GNU_SOURCE
GCC_OPTIMIZERS_CMD = $(GCC) -v --help 2>&1
GCC_WARNINGS_CMD = $(GCC) -v --help 2>&1
ifeq (Darwin,$(OSTYPE))
OSNAME = OSX
LIBEXT = dylib
# OSX's XCode gcc doesn't support LTO, but gcc built to explicitly enable it will work
ifeq (,$(shell $(GCC) -v /dev/null 2>&1 | grep '\-\-enable-lto'))
LTO_EXCLUDE_VERSIONS += $(GCC_VERSION)
endif
else
ifeq (Linux,$(OSTYPE))
LIBPATH := $(sort $(foreach lib,$(shell /sbin/ldconfig -p | grep ' => /' | sed 's/^.* => //'),$(dir $(lib))))
LIBEXT = so
else
ifeq (SunOS,$(OSTYPE))
OSNAME = Solaris
LIBPATH := $(shell crle | grep 'Default Library Path' | awk '{ print $$5 }' | sed 's/:/ /g')
LIBEXT = so
OS_LDFLAGS += -lsocket -lnsl
ifeq (incsfw,$(shell if $(TEST) -d /opt/sfw/include; then echo incsfw; fi))
INCPATH += /opt/sfw/include
OS_CCDEFS += -I/opt/sfw/include
endif
ifeq (libsfw,$(shell if $(TEST) -d /opt/sfw/lib; then echo libsfw; fi))
LIBPATH += /opt/sfw/lib
OS_LDFLAGS += -L/opt/sfw/lib -R/opt/sfw/lib
endif
else
ifeq (cygwin,$(OSTYPE))
# use 0readme_ethernet.txt documented Windows pcap build components
INCPATH += ../windows-build/winpcap/WpdPack/include
LIBPATH += ../windows-build/winpcap/WpdPack/lib
PCAPLIB = wpcap
LIBEXT = a
else
LDSEARCH :=$(shell ldconfig -r | grep 'search directories' | awk '{print $$3}' | sed 's/:/ /g')
ifneq (,$(LDSEARCH))
LIBPATH := $(LDSEARCH)
endif
ifeq (usrpkglib,$(shell if $(TEST) -d /usr/pkg/lib; then echo usrpkglib; fi))
LIBPATH += /usr/pkg/lib
OS_LDFLAGS += -L/usr/pkg/lib -R/usr/pkg/lib
endif
ifneq (,$(findstring NetBSD,$(OSTYPE))$(findstring FreeBSD,$(OSTYPE)))
LIBEXT = so
else
LIBEXT = a
endif
endif
endif
endif
endif
endif
$(info lib paths are: $(LIBPATH))
find_lib = $(strip $(firstword $(foreach dir,$(strip $(LIBPATH)),$(wildcard $(dir)/lib$(1).$(LIBEXT)))))
find_include = $(strip $(firstword $(foreach dir,$(strip $(INCPATH)),$(wildcard $(dir)/$(1).h))))
ifneq (,$(call find_lib,m))
OS_LDFLAGS += -lm
$(info using libm: $(call find_lib,m))
endif
ifneq (,$(call find_lib,rt))
OS_LDFLAGS += -lrt
$(info using librt: $(call find_lib,rt))
endif
ifneq (,$(call find_lib,pthread))
ifneq (,$(call find_include,pthread))
OS_CCDEFS += -DUSE_READER_THREAD
ifeq (,$(NOASYNCH))
OS_CCDEFS += -DSIM_ASYNCH_IO
endif
OS_LDFLAGS += -lpthread
$(info using libpthread: $(call find_lib,pthread) $(call find_include,pthread))
endif
endif
ifneq (,$(call find_include,dlfcn))
ifneq (,$(call find_lib,dl))
OS_CCDEFS += -DHAVE_DLOPEN=$(LIBEXT)
OS_LDFLAGS += -ldl
$(info using libdl: $(call find_lib,dl) $(call find_include,dlfcn))
else
ifeq (BSD,$(findstring BSD,$(OSTYPE)))
OS_CCDEFS += -DHAVE_DLOPEN=so
$(info using libdl: $(call find_include,dlfcn))
endif
endif
endif
ifneq (,$(NETWORK_USEFUL))
ifneq (,$(call find_include,pcap))
ifneq (,$(call find_lib,$(PCAPLIB)))
ifneq ($(USE_NETWORK),) # Network support specified on the GNU make command line
NETWORK_CCDEFS = -DUSE_NETWORK -I$(dir $(call find_include,pcap))
ifeq (cygwin,$(OSTYPE))
# cygwin has no ldconfig so explicitly specify pcap object library
NETWORK_LDFLAGS = -L$(dir $(call find_lib,$(PCAPLIB))) -Wl,-R,$(dir $(call find_lib,$(PCAPLIB))) -l$(PCAPLIB)
else
NETWORK_LDFLAGS = -l$(PCAPLIB)
endif
$(info using libpcap: $(call find_lib,$(PCAPLIB)) $(call find_include,pcap))
NETWORK_FEATURES = - static networking support using $(OSNAME) provided libpcap components
else # default build uses dynamic libpcap
NETWORK_CCDEFS = -DUSE_SHARED -I$(dir $(call find_include,pcap))
$(info using libpcap: $(call find_include,pcap))
NETWORK_FEATURES = - dynamic networking support using $(OSNAME) provided libpcap components
endif
else
NETWORK_CCDEFS = -DUSE_SHARED -I$(dir $(call find_include,pcap))
NETWORK_FEATURES = - dynamic networking support using $(OSNAME) provided libpcap components
$(info using libpcap: $(call find_include,pcap))
endif
else
# Look for package built from tcpdump.org sources with default install target (or cygwin winpcap)
LIBPATH += /usr/local/lib
INCPATH += /usr/local/include
LIBEXTSAVE := $(LIBEXT)
LIBEXT = a
ifneq (,$(call find_lib,$(PCAPLIB)))
ifneq (,$(call find_include,pcap))
$(info using libpcap: $(call find_lib,$(PCAPLIB)) $(call find_include,pcap))
ifeq (cygwin,$(OSTYPE))
NETWORK_CCDEFS = -DUSE_NETWORK -I$(dir $(call find_include,pcap))
NETWORK_LDFLAGS = -L$(dir $(call find_lib,$(PCAPLIB))) -Wl,-R,$(dir $(call find_lib,$(PCAPLIB))) -l$(PCAPLIB)
NETWORK_FEATURES = - static networking support using libpcap components located in the cygwin directories
else
NETWORK_CCDEFS := -DUSE_NETWORK -isystem $(dir $(call find_include,pcap)) $(call find_lib,$(PCAPLIB))
NETWORK_FEATURES = - networking support using libpcap components from www.tcpdump.org
$(info *** Warning ***)
$(info *** Warning *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) being built with networking support using)
$(info *** Warning *** libpcap components from www.tcpdump.org.)
$(info *** Warning *** Some users have had problems using the www.tcpdump.org libpcap)
$(info *** Warning *** components for simh networking. For best results, with)
$(info *** Warning *** simh networking, it is recommended that you install the)
$(info *** Warning *** libpcap-dev package from your $(OSTYPE) distribution)
$(info *** Warning ***)
endif
else
$(error using libpcap: $(call find_lib,$(PCAPLIB)) missing pcap.h)
endif
endif
LIBEXT = $(LIBEXTSAVE)
endif
ifneq (,$(findstring USE_NETWORK,$(NETWORK_CCDEFS))$(findstring USE_SHARED,$(NETWORK_CCDEFS)))
# Given we have libpcap components, consider other network connections as well
ifneq (,$(call find_lib,vdeplug))
# libvdeplug requires the use of the OS provided libpcap
ifeq (,$(findstring usr/local,$(NETWORK_CCDEFS)))
ifneq (,$(call find_include,libvdeplug))
# Provide support for vde networking
NETWORK_CCDEFS += -DUSE_VDE_NETWORK
NETWORK_LDFLAGS += -lvdeplug
$(info using libvdeplug: $(call find_lib,vdeplug) $(call find_include,libvdeplug))
endif
endif
endif
ifneq (,$(call find_include,linux/if_tun))
# Provide support for Tap networking on Linux
NETWORK_CCDEFS += -DUSE_TAP_NETWORK
endif
ifeq (bsdtuntap,$(shell if $(TEST) -e /usr/include/net/if_tun.h -o -e /Library/Extensions/tap.kext; then echo bsdtuntap; fi))
# Provide support for Tap networking on BSD platforms (including OS X)
NETWORK_CCDEFS += -DUSE_TAP_NETWORK -DUSE_BSDTUNTAP
endif
else
NETWORK_FEATURES = - WITHOUT networking support
$(info *** Warning ***)
$(info *** Warning *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) are being built WITHOUT networking support)
$(info *** Warning ***)
$(info *** Warning *** To build simulator(s) with networking support you should read)
$(info *** Warning *** 0readme_ethernet.txt and follow the instructions regarding the)
$(info *** Warning *** needed libpcap components for your $(OSTYPE) platform)
$(info *** Warning ***)
endif
NETWORK_OPT = $(NETWORK_CCDEFS)
endif
ifneq (binexists,$(shell if $(TEST) -e BIN; then echo binexists; fi))
MKDIRBIN = if $(TEST) ! -e BIN; then mkdir BIN; fi
endif
else
#Win32 Environments (via MinGW32)
GCC = gcc
GCC_Path := $(dir $(shell where gcc.exe))
GCC_VERSION = $(word 3,$(shell $(GCC) --version))
LTO_EXCLUDE_VERSIONS = 4.5.2
ifeq (pthreads,$(shell if exist ..\windows-build\pthreads\Pre-built.2\include\pthread.h echo pthreads))
PTHREADS_CCDEFS = -DUSE_READER_THREAD -DPTW32_STATIC_LIB -I../windows-build/pthreads/Pre-built.2/include
ifeq (,$(NOASYNCH))
PTHREADS_CCDEFS += -DSIM_ASYNCH_IO
endif
PTHREADS_LDFLAGS = -lpthreadGC2 -L..\windows-build\pthreads\Pre-built.2\lib
else
ifeq (pthreads,$(shell if exist $(dir $(GCC_Path))..\include\pthread.h echo pthreads))
PTHREADS_CCDEFS = -DUSE_READER_THREAD
ifeq (,$(NOASYNCH))
PTHREADS_CCDEFS += -DSIM_ASYNCH_IO
endif
PTHREADS_LDFLAGS = -lpthread
endif
endif
ifeq (pcap,$(shell if exist ..\windows-build\winpcap\Wpdpack\include\pcap.h echo pcap))
PCAP_CCDEFS = -I../windows-build/winpcap/Wpdpack/include -I$(GCC_Path)..\include\ddk -DUSE_SHARED
NETWORK_LDFLAGS =
NETWORK_OPT = -DUSE_SHARED
NETWORK_FEATURES = - dynamic networking support using windows-build provided libpcap components
else
ifeq (pcap,$(shell if exist $(dir $(GCC_Path))..\include\pcap.h echo pcap))
PCAP_CCDEFS = -DUSE_SHARED -I$(GCC_Path)..\include\ddk
NETWORK_LDFLAGS =
NETWORK_OPT = -DUSE_SHARED
NETWORK_FEATURES = - dynamic networking support using libpcap components found in the MinGW directories
endif
endif
OS_CCDEFS = -fms-extensions $(PTHREADS_CCDEFS) $(PCAP_CCDEFS)
OS_LDFLAGS = -lm -lwsock32 -lwinmm $(PTHREADS_LDFLAGS)
EXE = .exe
ifneq (binexists,$(shell if exist BIN echo binexists))
MKDIRBIN = if not exist BIN mkdir BIN
endif
ifneq ($(USE_NETWORK),)
NETWORK_OPT = -DUSE_SHARED
endif
endif
ifneq ($(DEBUG),)
CFLAGS_G = -g -ggdb -g3
CFLAGS_O = -O0
BUILD_FEATURES = - debugging support
else
CFLAGS_O = -O2
LDFLAGS_O =
GCC_MAJOR_VERSION = $(firstword $(subst ., ,$(GCC_VERSION)))
ifneq (3,$(GCC_MAJOR_VERSION))
ifeq (,$(GCC_OPTIMIZERS_CMD))
GCC_OPTIMIZERS_CMD = $(GCC) --help=optimizers
endif
GCC_OPTIMIZERS = $(shell $(GCC_OPTIMIZERS_CMD))
endif
ifneq (,$(findstring $(GCC_VERSION),$(LTO_EXCLUDE_VERSIONS)))
NO_LTO = 1
endif
ifneq (,$(findstring -finline-functions,$(GCC_OPTIMIZERS)))
CFLAGS_O += -finline-functions
endif
ifneq (,$(findstring -fgcse-after-reload,$(GCC_OPTIMIZERS)))
CFLAGS_O += -fgcse-after-reload
endif
ifneq (,$(findstring -fpredictive-commoning,$(GCC_OPTIMIZERS)))
CFLAGS_O += -fpredictive-commoning
endif
ifneq (,$(findstring -fipa-cp-clone,$(GCC_OPTIMIZERS)))
CFLAGS_O += -fipa-cp-clone
endif
ifneq (,$(findstring -funsafe-loop-optimizations,$(GCC_OPTIMIZERS)))
CFLAGS_O += -fno-unsafe-loop-optimizations
endif
ifneq (,$(findstring -fstrict-overflow,$(GCC_OPTIMIZERS)))
CFLAGS_O += -fno-strict-overflow
endif
ifeq (,$(NO_LTO))
ifneq (,$(findstring -flto,$(GCC_OPTIMIZERS)))
CFLAGS_O += -flto -fwhole-program
LDFLAGS_O += -flto -fwhole-program
endif
endif
BUILD_FEATURES = - compiler optimizations and no debugging support
endif
ifneq (3,$(GCC_MAJOR_VERSION))
ifeq (,$(GCC_WARNINGS_CMD))
GCC_WARNINGS_CMD = $(GCC) --help=warnings
endif
ifneq (,$(findstring -Wunused-result,$(shell $(GCC_WARNINGS_CMD))))
CFLAGS_O += -Wno-unused-result
endif
endif
ifneq (clean,$(MAKECMDGOALS))
BUILD_FEATURES := $(BUILD_FEATURES). GCC Version: $(GCC_VERSION)
$(info ***)
$(info *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) being built with:)
$(info *** $(BUILD_FEATURES).)
ifneq (,$(NETWORK_FEATURES))
$(info *** $(NETWORK_FEATURES).)
endif
$(info ***)
endif
ifneq ($(DONT_USE_ROMS),)
ROMS_OPT = -DDONT_USE_INTERNAL_ROM
else
BUILD_ROMS = ${BIN}BuildROMs${EXE}
endif
ifneq ($(DONT_USE_READER_THREAD),)
NETWORK_OPT += -DDONT_USE_READER_THREAD
endif
CC = $(GCC) -std=c99 -U__STRICT_ANSI__ $(CFLAGS_G) $(CFLAGS_O) -I . $(OS_CCDEFS) $(ROMS_OPT)
LDFLAGS = $(OS_LDFLAGS) $(NETWORK_LDFLAGS) $(LDFLAGS_O)
#
# Common Libraries
#
BIN = BIN/
SIM = scp.c sim_console.c sim_fio.c sim_timer.c sim_sock.c \
sim_tmxr.c sim_ether.c sim_tape.c sim_disk.c sim_serial.c
#
# Emulator source files and compile time options
#
PDP1D = PDP1
PDP1 = ${PDP1D}/pdp1_lp.c ${PDP1D}/pdp1_cpu.c ${PDP1D}/pdp1_stddev.c \
${PDP1D}/pdp1_sys.c ${PDP1D}/pdp1_dt.c ${PDP1D}/pdp1_drm.c \
${PDP1D}/pdp1_clk.c ${PDP1D}/pdp1_dcs.c
PDP1_OPT = -I ${PDP1D}
NOVAD = NOVA
NOVA = ${NOVAD}/nova_sys.c ${NOVAD}/nova_cpu.c ${NOVAD}/nova_dkp.c \
${NOVAD}/nova_dsk.c ${NOVAD}/nova_lp.c ${NOVAD}/nova_mta.c \
${NOVAD}/nova_plt.c ${NOVAD}/nova_pt.c ${NOVAD}/nova_clk.c \
${NOVAD}/nova_tt.c ${NOVAD}/nova_tt1.c ${NOVAD}/nova_qty.c
NOVA_OPT = -I ${NOVAD}
ECLIPSE = ${NOVAD}/eclipse_cpu.c ${NOVAD}/eclipse_tt.c ${NOVAD}/nova_sys.c \
${NOVAD}/nova_dkp.c ${NOVAD}/nova_dsk.c ${NOVAD}/nova_lp.c \
${NOVAD}/nova_mta.c ${NOVAD}/nova_plt.c ${NOVAD}/nova_pt.c \
${NOVAD}/nova_clk.c ${NOVAD}/nova_tt1.c ${NOVAD}/nova_qty.c
ECLIPSE_OPT = -I ${NOVAD} -DECLIPSE
PDP18BD = PDP18B
PDP18B = ${PDP18BD}/pdp18b_dt.c ${PDP18BD}/pdp18b_drm.c ${PDP18BD}/pdp18b_cpu.c \
${PDP18BD}/pdp18b_lp.c ${PDP18BD}/pdp18b_mt.c ${PDP18BD}/pdp18b_rf.c \
${PDP18BD}/pdp18b_rp.c ${PDP18BD}/pdp18b_stddev.c ${PDP18BD}/pdp18b_sys.c \
${PDP18BD}/pdp18b_rb.c ${PDP18BD}/pdp18b_tt1.c ${PDP18BD}/pdp18b_fpp.c
PDP4_OPT = -DPDP4 -I ${PDP18BD}
PDP7_OPT = -DPDP7 -I ${PDP18BD}
PDP9_OPT = -DPDP9 -I ${PDP18BD}
PDP15_OPT = -DPDP15 -I ${PDP18BD}
PDP11D = PDP11
PDP11 = ${PDP11D}/pdp11_fp.c ${PDP11D}/pdp11_cpu.c ${PDP11D}/pdp11_dz.c \
${PDP11D}/pdp11_cis.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_rk.c \
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rp.c ${PDP11D}/pdp11_rx.c \
${PDP11D}/pdp11_stddev.c ${PDP11D}/pdp11_sys.c ${PDP11D}/pdp11_tc.c \
${PDP11D}/pdp11_tm.c ${PDP11D}/pdp11_ts.c ${PDP11D}/pdp11_io.c \
${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_tq.c ${PDP11D}/pdp11_pclk.c \
${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_pt.c ${PDP11D}/pdp11_hk.c \
${PDP11D}/pdp11_xq.c ${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_vh.c \
${PDP11D}/pdp11_rh.c ${PDP11D}/pdp11_tu.c ${PDP11D}/pdp11_cpumod.c \
${PDP11D}/pdp11_cr.c ${PDP11D}/pdp11_rf.c ${PDP11D}/pdp11_dl.c \
${PDP11D}/pdp11_ta.c ${PDP11D}/pdp11_rc.c ${PDP11D}/pdp11_kg.c \
${PDP11D}/pdp11_ke.c ${PDP11D}/pdp11_dc.c ${PDP11D}/pdp11_io_lib.c
PDP11_OPT = -DVM_PDP11 -I ${PDP11D} ${NETWORK_OPT}
VAXD = VAX
VAX = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c ${VAXD}/vax_io.c \
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
${VAXD}/vax_mmu.c ${VAXD}/vax_stddev.c ${VAXD}/vax_sysdev.c \
${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c ${VAXD}/vax_syslist.c \
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
${PDP11D}/pdp11_xq.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_vh.c \
${PDP11D}/pdp11_cr.c ${PDP11D}/pdp11_io_lib.c
VAX_OPT = -DVM_VAX -DUSE_INT64 -DUSE_ADDR64 -I ${VAXD} -I ${PDP11D} ${NETWORK_OPT}
VAX780 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
${VAXD}/vax780_stddev.c ${VAXD}/vax780_sbi.c \
${VAXD}/vax780_mem.c ${VAXD}/vax780_uba.c ${VAXD}/vax780_mba.c \
${VAXD}/vax780_fload.c ${VAXD}/vax780_syslist.c \
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_cr.c \
${PDP11D}/pdp11_rp.c ${PDP11D}/pdp11_tu.c ${PDP11D}/pdp11_hk.c \
${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_io_lib.c
VAX780_OPT = -DVM_VAX -DVAX_780 -DUSE_INT64 -DUSE_ADDR64 -I VAX -I ${PDP11D} ${NETWORK_OPT}
PDP10D = PDP10
PDP10 = ${PDP10D}/pdp10_fe.c ${PDP11D}/pdp11_dz.c ${PDP10D}/pdp10_cpu.c \
${PDP10D}/pdp10_ksio.c ${PDP10D}/pdp10_lp20.c ${PDP10D}/pdp10_mdfp.c \
${PDP10D}/pdp10_pag.c ${PDP10D}/pdp10_rp.c ${PDP10D}/pdp10_sys.c \
${PDP10D}/pdp10_tim.c ${PDP10D}/pdp10_tu.c ${PDP10D}/pdp10_xtnd.c \
${PDP11D}/pdp11_pt.c ${PDP11D}/pdp11_ry.c \
${PDP11D}/pdp11_cr.c
PDP10_OPT = -DVM_PDP10 -DUSE_INT64 -I ${PDP10D} -I ${PDP11D}
PDP8D = PDP8
PDP8 = ${PDP8D}/pdp8_cpu.c ${PDP8D}/pdp8_clk.c ${PDP8D}/pdp8_df.c \
${PDP8D}/pdp8_dt.c ${PDP8D}/pdp8_lp.c ${PDP8D}/pdp8_mt.c \
${PDP8D}/pdp8_pt.c ${PDP8D}/pdp8_rf.c ${PDP8D}/pdp8_rk.c \
${PDP8D}/pdp8_rx.c ${PDP8D}/pdp8_sys.c ${PDP8D}/pdp8_tt.c \
${PDP8D}/pdp8_ttx.c ${PDP8D}/pdp8_rl.c ${PDP8D}/pdp8_tsc.c \
${PDP8D}/pdp8_td.c ${PDP8D}/pdp8_ct.c ${PDP8D}/pdp8_fpp.c
PDP8_OPT = -I ${PDP8D}
H316D = H316
H316 = ${H316D}/h316_stddev.c ${H316D}/h316_lp.c ${H316D}/h316_cpu.c \
${H316D}/h316_sys.c ${H316D}/h316_mt.c ${H316D}/h316_fhd.c \
${H316D}/h316_dp.c
H316_OPT = -I ${H316D}
HP2100D = HP2100
HP2100 = ${HP2100D}/hp2100_stddev.c ${HP2100D}/hp2100_dp.c ${HP2100D}/hp2100_dq.c \
${HP2100D}/hp2100_dr.c ${HP2100D}/hp2100_lps.c ${HP2100D}/hp2100_ms.c \
${HP2100D}/hp2100_mt.c ${HP2100D}/hp2100_mux.c ${HP2100D}/hp2100_cpu.c \
${HP2100D}/hp2100_fp.c ${HP2100D}/hp2100_sys.c ${HP2100D}/hp2100_lpt.c \
${HP2100D}/hp2100_ipl.c ${HP2100D}/hp2100_ds.c ${HP2100D}/hp2100_cpu0.c \
${HP2100D}/hp2100_cpu1.c ${HP2100D}/hp2100_cpu2.c ${HP2100D}/hp2100_cpu3.c \
${HP2100D}/hp2100_cpu4.c ${HP2100D}/hp2100_cpu5.c ${HP2100D}/hp2100_cpu6.c \
${HP2100D}/hp2100_cpu7.c ${HP2100D}/hp2100_fp1.c ${HP2100D}/hp2100_baci.c \
${HP2100D}/hp2100_mpx.c ${HP2100D}/hp2100_pif.c ${HP2100D}/hp2100_di.c \
${HP2100D}/hp2100_di_da.c ${HP2100D}/hp_disclib.c
HP2100_OPT = -DHAVE_INT64 -I ${HP2100D}
I1401D = I1401
I1401 = ${I1401D}/i1401_lp.c ${I1401D}/i1401_cpu.c ${I1401D}/i1401_iq.c \
${I1401D}/i1401_cd.c ${I1401D}/i1401_mt.c ${I1401D}/i1401_dp.c \
${I1401D}/i1401_sys.c
I1401_OPT = -I ${I1401D}
I1620D = I1620
I1620 = ${I1620D}/i1620_cd.c ${I1620D}/i1620_dp.c ${I1620D}/i1620_pt.c \
${I1620D}/i1620_tty.c ${I1620D}/i1620_cpu.c ${I1620D}/i1620_lp.c \
${I1620D}/i1620_fp.c ${I1620D}/i1620_sys.c
I1620_OPT = -I ${I1620D}
I7094D = I7094
I7094 = ${I7094D}/i7094_cpu.c ${I7094D}/i7094_cpu1.c ${I7094D}/i7094_io.c \
${I7094D}/i7094_cd.c ${I7094D}/i7094_clk.c ${I7094D}/i7094_com.c \
${I7094D}/i7094_drm.c ${I7094D}/i7094_dsk.c ${I7094D}/i7094_sys.c \
${I7094D}/i7094_lp.c ${I7094D}/i7094_mt.c ${I7094D}/i7094_binloader.c
I7094_OPT = -DUSE_INT64 -I ${I7094D}
IBM1130D = Ibm1130
IBM1130 = ${IBM1130D}/ibm1130_cpu.c ${IBM1130D}/ibm1130_cr.c \
${IBM1130D}/ibm1130_disk.c ${IBM1130D}/ibm1130_stddev.c \
${IBM1130D}/ibm1130_sys.c ${IBM1130D}/ibm1130_gdu.c \
${IBM1130D}/ibm1130_gui.c ${IBM1130D}/ibm1130_prt.c \
${IBM1130D}/ibm1130_fmt.c ${IBM1130D}/ibm1130_ptrp.c \
${IBM1130D}/ibm1130_plot.c ${IBM1130D}/ibm1130_sca.c \
${IBM1130D}/ibm1130_t2741.c
IBM1130_OPT = -I ${IBM1130D}
ID16D = Interdata
ID16 = ${ID16D}/id16_cpu.c ${ID16D}/id16_sys.c ${ID16D}/id_dp.c \
${ID16D}/id_fd.c ${ID16D}/id_fp.c ${ID16D}/id_idc.c ${ID16D}/id_io.c \
${ID16D}/id_lp.c ${ID16D}/id_mt.c ${ID16D}/id_pas.c ${ID16D}/id_pt.c \
${ID16D}/id_tt.c ${ID16D}/id_uvc.c ${ID16D}/id16_dboot.c ${ID16D}/id_ttp.c
ID16_OPT = -I ${ID16D}
ID32D = Interdata
ID32 = ${ID32D}/id32_cpu.c ${ID32D}/id32_sys.c ${ID32D}/id_dp.c \
${ID32D}/id_fd.c ${ID32D}/id_fp.c ${ID32D}/id_idc.c ${ID32D}/id_io.c \
${ID32D}/id_lp.c ${ID32D}/id_mt.c ${ID32D}/id_pas.c ${ID32D}/id_pt.c \
${ID32D}/id_tt.c ${ID32D}/id_uvc.c ${ID32D}/id32_dboot.c ${ID32D}/id_ttp.c
ID32_OPT = -I ${ID32D}
S3D = S3
S3 = ${S3D}/s3_cd.c ${S3D}/s3_cpu.c ${S3D}/s3_disk.c ${S3D}/s3_lp.c \
${S3D}/s3_pkb.c ${S3D}/s3_sys.c
S3_OPT = -I ${S3D}
ALTAIRD = ALTAIR
ALTAIR = ${ALTAIRD}/altair_sio.c ${ALTAIRD}/altair_cpu.c ${ALTAIRD}/altair_dsk.c \
${ALTAIRD}/altair_sys.c
ALTAIR_OPT = -I ${ALTAIRD}
ALTAIRZ80D = AltairZ80
ALTAIRZ80 = ${ALTAIRZ80D}/altairz80_cpu.c ${ALTAIRZ80D}/altairz80_cpu_nommu.c \
${ALTAIRZ80D}/altairz80_dsk.c ${ALTAIRZ80D}/disasm.c \
${ALTAIRZ80D}/altairz80_sio.c ${ALTAIRZ80D}/altairz80_sys.c \
${ALTAIRZ80D}/altairz80_hdsk.c ${ALTAIRZ80D}/altairz80_net.c \
${ALTAIRZ80D}/flashwriter2.c ${ALTAIRZ80D}/i86_decode.c \
${ALTAIRZ80D}/i86_ops.c ${ALTAIRZ80D}/i86_prim_ops.c \
${ALTAIRZ80D}/i8272.c ${ALTAIRZ80D}/insnsd.c \
${ALTAIRZ80D}/mfdc.c ${ALTAIRZ80D}/n8vem.c ${ALTAIRZ80D}/vfdhd.c \
${ALTAIRZ80D}/s100_disk1a.c ${ALTAIRZ80D}/s100_disk2.c ${ALTAIRZ80D}/s100_disk3.c\
${ALTAIRZ80D}/s100_fif.c ${ALTAIRZ80D}/s100_mdriveh.c \
${ALTAIRZ80D}/s100_mdsad.c ${ALTAIRZ80D}/s100_selchan.c \
${ALTAIRZ80D}/s100_ss1.c ${ALTAIRZ80D}/s100_64fdc.c \
${ALTAIRZ80D}/s100_scp300f.c ${ALTAIRZ80D}/sim_imd.c \
${ALTAIRZ80D}/wd179x.c ${ALTAIRZ80D}/s100_hdc1001.c \
${ALTAIRZ80D}/s100_if3.c ${ALTAIRZ80D}/s100_adcs6.c
ALTAIRZ80_OPT = -I ${ALTAIRZ80D}
GRID = GRI
GRI = ${GRID}/gri_cpu.c ${GRID}/gri_stddev.c ${GRID}/gri_sys.c
GRI_OPT = -I ${GRID}
LGPD = LGP
LGP = ${LGPD}/lgp_cpu.c ${LGPD}/lgp_stddev.c ${LGPD}/lgp_sys.c
LGP_OPT = -I ${LGPD}
SDSD = SDS
SDS = ${SDSD}/sds_cpu.c ${SDSD}/sds_drm.c ${SDSD}/sds_dsk.c ${SDSD}/sds_io.c \
${SDSD}/sds_lp.c ${SDSD}/sds_mt.c ${SDSD}/sds_mux.c ${SDSD}/sds_rad.c \
${SDSD}/sds_stddev.c ${SDSD}/sds_sys.c
SDS_OPT = -I ${SDSD}
SWTPD = swtp
SWTP = ${SWTPD}/swtp_cpu.c ${SWTPD}/swtp_dsk.c ${SWTPD}/swtp_sio.c \
${SWTPD}/swtp_sys.c
SWTP_OPT = -I ${SWTPD}
#
# Build everything
#
ALL = pdp1 pdp4 pdp7 pdp8 pdp9 pdp15 pdp11 pdp10 \
vax vax780 nova eclipse hp2100 i1401 i1620 s3 \
altair altairz80 gri i7094 ibm1130 id16 \
id32 sds lgp h316 swtp
all : ${ALL}
clean :
ifeq ($(WIN32),)
${RM} -r ${BIN}
else
if exist BIN\*.exe del /q BIN\*.exe
if exist BIN rmdir BIN
endif
${BIN}BuildROMs${EXE} :
${MKDIRBIN}
ifeq (agcc,$(findstring agcc,$(firstword $(CC))))
gcc $(wordlist 2,1000,${CC}) sim_BuildROMs.c -o $@
else
${CC} sim_BuildROMs.c -o $@
endif
ifeq ($(WIN32),)
$@
${RM} $@
ifeq (Darwin,$(OSTYPE)) # remove Xcode's debugging symbols folder too
${RM} -rf $@.dSYM
endif
else
$(@D)\$(@F)
del $(@D)\$(@F)
endif
#
# Individual builds
#
pdp1 : ${BIN}pdp1${EXE}
${BIN}pdp1${EXE} : ${PDP1} ${SIM}
${MKDIRBIN}
${CC} ${PDP1} ${SIM} ${PDP1_OPT} -o $@ ${LDFLAGS}
pdp4 : ${BIN}pdp4${EXE}
${BIN}pdp4${EXE} : ${PDP18B} ${SIM}
${MKDIRBIN}
${CC} ${PDP18B} ${SIM} ${PDP4_OPT} -o $@ ${LDFLAGS}
pdp7 : ${BIN}pdp7${EXE}
${BIN}pdp7${EXE} : ${PDP18B} ${SIM}
${MKDIRBIN}
${CC} ${PDP18B} ${SIM} ${PDP7_OPT} -o $@ ${LDFLAGS}
pdp8 : ${BIN}pdp8${EXE}
${BIN}pdp8${EXE} : ${PDP8} ${SIM}
${MKDIRBIN}
${CC} ${PDP8} ${SIM} ${PDP8_OPT} -o $@ ${LDFLAGS}
pdp9 : ${BIN}pdp9${EXE}
${BIN}pdp9${EXE} : ${PDP18B} ${SIM}
${MKDIRBIN}
${CC} ${PDP18B} ${SIM} ${PDP9_OPT} -o $@ ${LDFLAGS}
pdp15 : ${BIN}pdp15${EXE}
${BIN}pdp15${EXE} : ${PDP18B} ${SIM}
${MKDIRBIN}
${CC} ${PDP18B} ${SIM} ${PDP15_OPT} -o $@ ${LDFLAGS}
pdp10 : ${BIN}pdp10${EXE}
${BIN}pdp10${EXE} : ${PDP10} ${SIM}
${MKDIRBIN}
${CC} ${PDP10} ${SIM} ${PDP10_OPT} -o $@ ${LDFLAGS}
pdp11 : ${BIN}pdp11${EXE}
${BIN}pdp11${EXE} : ${PDP11} ${SIM}
${MKDIRBIN}
${CC} ${PDP11} ${SIM} ${PDP11_OPT} -o $@ ${LDFLAGS}
vax : ${BIN}vax${EXE}
${BIN}vax${EXE} : ${VAX} ${SIM} ${BUILD_ROMS}
${MKDIRBIN}
${CC} ${VAX} ${SIM} ${VAX_OPT} -o $@ ${LDFLAGS}
vax780 : ${BIN}vax780${EXE}
${BIN}vax780${EXE} : ${VAX780} ${SIM} ${BUILD_ROMS}
${MKDIRBIN}
${CC} ${VAX780} ${SIM} ${VAX780_OPT} -o $@ ${LDFLAGS}
nova : ${BIN}nova${EXE}
${BIN}nova${EXE} : ${NOVA} ${SIM}
${MKDIRBIN}
${CC} ${NOVA} ${SIM} ${NOVA_OPT} -o $@ ${LDFLAGS}
eclipse : ${BIN}eclipse${EXE}
${BIN}eclipse${EXE} : ${ECLIPSE} ${SIM}
${MKDIRBIN}
${CC} ${ECLIPSE} ${SIM} ${ECLIPSE_OPT} -o $@ ${LDFLAGS}
h316 : ${BIN}h316${EXE}
${BIN}h316${EXE} : ${H316} ${SIM}
${MKDIRBIN}
${CC} ${H316} ${SIM} ${H316_OPT} -o $@ ${LDFLAGS}
hp2100 : ${BIN}hp2100${EXE}
${BIN}hp2100${EXE} : ${HP2100} ${SIM}
${MKDIRBIN}
${CC} ${HP2100} ${SIM} ${HP2100_OPT} -o $@ ${LDFLAGS}
i1401 : ${BIN}i1401${EXE}
${BIN}i1401${EXE} : ${I1401} ${SIM}
${MKDIRBIN}
${CC} ${I1401} ${SIM} ${I1401_OPT} -o $@ ${LDFLAGS}
i1620 : ${BIN}i1620${EXE}
${BIN}i1620${EXE} : ${I1620} ${SIM}
${MKDIRBIN}
${CC} ${I1620} ${SIM} ${I1620_OPT} -o $@ ${LDFLAGS}
i7094 : ${BIN}i7094${EXE}
${BIN}i7094${EXE} : ${I7094} ${SIM}
${MKDIRBIN}
${CC} ${I7094} ${SIM} ${I7094_OPT} -o $@ ${LDFLAGS}
ibm1130 : ${BIN}ibm1130${EXE}
${BIN}ibm1130${EXE} : ${IBM1130}
${MKDIRBIN}
${CC} ${IBM1130} ${SIM} ${IBM1130_OPT} -o $@ ${LDFLAGS}
s3 : ${BIN}s3${EXE}
${BIN}s3${EXE} : ${S3} ${SIM}
${MKDIRBIN}
${CC} ${S3} ${SIM} ${S3_OPT} -o $@ ${LDFLAGS}
altair : ${BIN}altair${EXE}
${BIN}altair${EXE} : ${ALTAIR} ${SIM}
${MKDIRBIN}
${CC} ${ALTAIR} ${SIM} ${ALTAIR_OPT} -o $@ ${LDFLAGS}
altairz80 : ${BIN}altairz80${EXE}
${BIN}altairz80${EXE} : ${ALTAIRZ80} ${SIM}
${MKDIRBIN}
${CC} ${ALTAIRZ80} ${SIM} ${ALTAIRZ80_OPT} -o $@ ${LDFLAGS}
gri : ${BIN}gri${EXE}
${BIN}gri${EXE} : ${GRI} ${SIM}
${MKDIRBIN}
${CC} ${GRI} ${SIM} ${GRI_OPT} -o $@ ${LDFLAGS}
lgp : ${BIN}lgp${EXE}
${BIN}lgp${EXE} : ${LGP} ${SIM}
${MKDIRBIN}
${CC} ${LGP} ${SIM} ${LGP_OPT} -o $@ ${LDFLAGS}
id16 : ${BIN}id16${EXE}
${BIN}id16${EXE} : ${ID16} ${SIM}
${MKDIRBIN}
${CC} ${ID16} ${SIM} ${ID16_OPT} -o $@ ${LDFLAGS}
id32 : ${BIN}id32${EXE}
${BIN}id32${EXE} : ${ID32} ${SIM}
${MKDIRBIN}
${CC} ${ID32} ${SIM} ${ID32_OPT} -o $@ ${LDFLAGS}
sds : ${BIN}sds${EXE}
${BIN}sds${EXE} : ${SDS} ${SIM}
${MKDIRBIN}
${CC} ${SDS} ${SIM} ${SDS_OPT} -o $@ ${LDFLAGS}
swtp : ${BIN}swtp${EXE}
${BIN}swtp${EXE} : ${SWTP} ${SIM}
${MKDIRBIN}
${CC} ${SWTP} ${SIM} ${SWTP_OPT} -o $@ ${LDFLAGS}
Reference in a new issue View git blame Copy permalink