simh-testsetgenerator/I1620/i1620_cpu.c

/* i1620_cpu.c: IBM 1620 CPU simulator

   Copyright (c) 2002, Robert M. Supnik

   Permission is hereby granted, free of charge, to any person obtaining a
   copy of this software and associated documentation files (the "Software"),
   to deal in the Software without restriction, including without limitation
   the rights to use, copy, modify, merge, publish, distribute, sublicense,
   and/or sell copies of the Software, and to permit persons to whom the
   Software is furnished to do so, subject to the following conditions:

   The above copyright notice and this permission notice shall be included in
   all copies or substantial portions of the Software.

   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
   ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
   IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
   CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

   Except as contained in this notice, the name of Robert M Supnik shall not
   be used in advertising or otherwise to promote the sale, use or other dealings
   in this Software without prior written authorization from Robert M Supnik.

   This CPU module incorporates code and comments from the 1620 simulator by
   Geoff Kuenning, with his permission.

   18-Oct-02	RMS	Fixed bugs in invalid result testing (found by Hans Pufal)

   The simulated register state for the IBM 1620 is:

   1620		sim	comment

   IR1		[PC]	program counter
   IR2			instruction register 2 (subroutine return address)
   OR1		[QAR]	Q address
   OR2		[PAR]	P address
   PR1			manual save address
   ind[0:99]		indicators

   Additional internal registers OR3, PR2, and PR3 are not simulated.

   The IBM 1620 is a fixed instruction length, variable data length, decimal
   data system.  Memory consists of 20000 - 60000 BCD digits, each containing
   four bits of data and a flag.  There are no general registers; all
   instructions are memory to memory.

   The 1620 uses a fixed, 12 digit instruction format:

	oo ppppp qqqqq

   where

	oo	=	opcode
	ppppp	=	P (usually destination) address
	qqqqq	=	Q (usually source) address

   Immediate instructions use the qqqqq field as the second operand.

   The 1620 Model 1 uses table lookups for add and multiply; for that reason,
   it was nicknamed CADET (Can't Add, Doesn't Even Try).  The Model 2 does
   adds in hardware and uses the add table memory for index registers.
*/

/* This routine is the instruction decode routine for the IBM 1620.
   It is called from the simulator control program to execute
   instructions in simulated memory, starting at the simulated PC.
   It runs until 'reason' is set non-zero.

   General notes:

   1. Reasons to stop.  The simulator can be stopped by:

	HALT instruction
	breakpoint encountered
	illegal addresses or instruction formats
	I/O error in I/O simulator

   2. Interrupts.  The 1620 has no interrupt structure.

   3. Non-existent memory.  On the 1620, all memory references
      are modulo the memory size.

   4. Adding I/O devices.  These modules must be modified:

	i1620_cpu.c	add iodisp table entry
	i1620_sys.c	add sim_devices table entry
*/

#include "i1620_defs.h"

#define PCQ_SIZE	64				/* must be 2**n */
#define PCQ_MASK	(PCQ_SIZE - 1)
#define PCQ_ENTRY	pcq[pcq_p = (pcq_p - 1) & PCQ_MASK] = saved_PC

uint8 M[MAXMEMSIZE] = { 0 };				/* main memory */
uint32 saved_PC = 0;					/* saved PC */
uint32 IR2 = 1;						/* inst reg 2 */
uint32 PAR = 0;						/* P address */
uint32 QAR = 0;						/* Q address */
uint32 PR1 = 1;						/* proc reg 1 */
uint32 iae = 1;						/* ind addr enb */
uint32 idxe = 0;					/* index enable */
uint32 idxb = 0;					/* index band */
uint32 io_stop = 1;					/* I/O stop */
uint32 ar_stop = 1;					/* arith stop */
int32 ind_max = 16;					/* iadr nest limit */
uint16 pcq[PCQ_SIZE] = { 0 };				/* PC queue */
int32 pcq_p = 0;					/* PC queue ptr */
REG *pcq_r = NULL;					/* PC queue reg ptr */
uint8 ind[NUM_IND] = { 0 };				/* indicators */

extern int32 sim_int_char;
extern int32 sim_interval;
extern int32 sim_brk_types, sim_brk_dflt, sim_brk_summ;	/* breakpoint info */
extern FILE *sim_log;

t_stat cpu_ex (t_value *vptr, t_addr addr, UNIT *uptr, int32 sw);
t_stat cpu_dep (t_value val, t_addr addr, UNIT *uptr, int32 sw);
t_stat cpu_reset (DEVICE *dptr);
t_stat cpu_set_opt1 (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat cpu_set_opt2 (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat cpu_set_model (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat cpu_set_size (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat cpu_set_save (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat cpu_set_table (UNIT *uptr, int32 val, char *cptr, void *desc);

int32 get_2d (uint32 ad);
t_stat get_addr (uint32 alast, int32 lnt, t_bool indexok, uint32 *addr);
t_stat cvt_addr (uint32 alast, int32 lnt, t_bool signok, int32 *val);
t_stat get_idx (uint32 aidx);
t_stat xmt_field (uint32 d, uint32 s, uint32 skp);
t_stat xmt_record (uint32 d, uint32 s, t_bool cpy);
t_stat xmt_index (uint32 d, uint32 s);
t_stat xmt_divd (uint32 d, uint32 s);
t_stat xmt_tns (uint32 d, uint32 s);
t_stat xmt_tnf (uint32 d, uint32 s);
t_stat add_field (uint32 d, uint32 s, t_bool sub, t_bool sto, int32 *sta);
uint32 add_one_digit (uint32 dst, uint32 src, uint32 *cry);
t_stat mul_field (uint32 mpc, uint32 mpy);
t_stat mul_one_digit (uint32 mpyd, uint32 mpcp, uint32 prop, uint32 last);
t_stat div_field (uint32 dvd, uint32 dvr, int32 *ez);
t_stat div_one_digit (uint32 dvd, uint32 dvr, uint32 max, uint32 *quod, uint32 *quop);
t_stat oct_to_dec (uint32 tbl, uint32 s);
t_stat dec_to_oct (uint32 d, uint32 tbl, int32 *ez);
t_stat or_field (uint32 d, uint32 s);
t_stat and_field (uint32 d, uint32 s);
t_stat xor_field (uint32 d, uint32 s);
t_stat com_field (uint32 d, uint32 s);
void upd_ind (void);

extern tty (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern ptp (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern ptr (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern cdp (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern cdr (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern dp (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern lpt (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern btp (uint32 op, uint32 pa, uint32 f0, uint32 f1);
extern btr (uint32 op, uint32 pa, uint32 f0, uint32 f1);

extern t_stat fp_add (uint32 d, uint32 s, t_bool sub);
extern t_stat fp_mul (uint32 d, uint32 s);
extern t_stat fp_div (uint32 d, uint32 s);
extern t_stat fp_fsl (uint32 d, uint32 s);
extern t_stat fp_fsr (uint32 d, uint32 s);

/* CPU data structures

   cpu_dev	CPU device descriptor
   cpu_unit	CPU unit descriptor
   cpu_reg	CPU register list
   cpu_mod	CPU modifier list
*/

UNIT cpu_unit = { UDATA (NULL, UNIT_FIX+UNIT_BCD+MI_STD, MAXMEMSIZE) };

REG cpu_reg[] = {
	{ DRDATA (PC, saved_PC, 16), PV_LEFT },
	{ DRDATA (IR2, IR2, 16), PV_LEFT },
	{ DRDATA (PR1, PR1, 16), PV_LEFT },
	{ DRDATA (PAR, PAR, 16), PV_LEFT + REG_RO },
	{ DRDATA (QAR, QAR, 16), PV_LEFT + REG_RO },
	{ FLDATA (SW1, ind[IN_SW1], 0) },
	{ FLDATA (SW2, ind[IN_SW2], 0) },
	{ FLDATA (SW3, ind[IN_SW3], 0) },
	{ FLDATA (SW4, ind[IN_SW4], 0) },
	{ FLDATA (HP, ind[IN_HP], 0) },
	{ FLDATA (EZ, ind[IN_EZ], 0) },
	{ FLDATA (OVF, ind[IN_OVF], 0) },
	{ FLDATA (EXPCHK, ind[IN_EXPCHK], 0) },
	{ FLDATA (RDCHK, ind[IN_RDCHK], 0) },
	{ FLDATA (WRCHK, ind[IN_WRCHK], 0) },
	{ FLDATA (ARSTOP, ar_stop, 0) },
	{ FLDATA (IOSTOP, io_stop, 0) },
	{ BRDATA (IND, ind, 10, 1, NUM_IND) },
	{ FLDATA (IAE, iae, 0) },
	{ FLDATA (IDXE, idxe, 0) },
	{ FLDATA (IDXB, idxb, 0) },
	{ DRDATA (INDMAX, ind_max, 16), REG_NZ + PV_LEFT },
	{ BRDATA (PCQ, pcq, 10, 14, PCQ_SIZE), REG_RO+REG_CIRC },
	{ ORDATA (PCQP, pcq_p, 6), REG_HRO },
	{ ORDATA (WRU, sim_int_char, 8) },
	{ NULL }  };

MTAB cpu_mod[] = {
	{ IF_IA, IF_IA, "IA", "IA", &cpu_set_opt1 },
	{ IF_IA, 0, "no IA", "NOIA", &cpu_set_opt1 },
	{ IF_EDT, IF_EDT, "EDT", "EDT", &cpu_set_opt1 },
	{ IF_EDT, 0, "no EDT", "NOEDT", &cpu_set_opt1 },
	{ IF_DIV, IF_DIV, "DIV", "DIV", &cpu_set_opt1 },
	{ IF_DIV, 0, "no DIV", "NODIV", &cpu_set_opt1 },
	{ IF_FP, IF_FP, "FP", "FP", NULL },
	{ IF_FP, 0, "no FP", "NOFP", NULL },
	{ IF_BIN, IF_BIN, "BIN", "BIN", &cpu_set_opt2 },
	{ IF_BIN, 0, "no BIN", "NOBIN", &cpu_set_opt2 },
	{ IF_IDX, IF_IDX, "IDX", "IDX", &cpu_set_opt2 },
	{ IF_IDX, 0, "no IDX", "NOIDX", &cpu_set_opt2 },
	{ IF_MII, IF_MII, "Model 2", "MOD2", &cpu_set_model },
	{ IF_MII, 0, "Model 1", "MOD1", &cpu_set_model },
	{ UNIT_MSIZE, 20000, NULL, "20K", &cpu_set_size },
	{ UNIT_MSIZE, 40000, NULL, "40K", &cpu_set_size },
	{ UNIT_MSIZE, 60000, NULL, "60K", &cpu_set_size },
	{ UNIT_MSIZE, 0, NULL, "SAVE", &cpu_set_save },
	{ UNIT_MSIZE, 0, NULL, "TABLE", &cpu_set_table },
	{ 0 }  };

DEVICE cpu_dev = {
	"CPU", &cpu_unit, cpu_reg, cpu_mod,
	1, 10, 18, 1, 16, 5,
	&cpu_ex, &cpu_dep, &cpu_reset,
	NULL, NULL, NULL };

/* Instruction table */

const int32 op_table[100] = {
	0,						/* 0 */
	IF_FP + IF_VPA + IF_VQA,			/* FADD */
	IF_FP + IF_VPA + IF_VQA,			/* FSUB */
	IF_FP + IF_VPA + IF_VQA,			/* FMUL */
	0,
	IF_FP + IF_VPA + IF_VQA,			/* FSL */
	IF_FP + IF_MII + IF_VPA + IF_VQA,		/* TFL */
	IF_FP + IF_MII + IF_VPA + IF_VQA,		/* BTFL */
	IF_FP + IF_VPA + IF_VQA,			/* FSR */
	IF_FP + IF_VPA + IF_VQA,			/* FDV */
	IF_MII + IF_VPA + IF_IMM,			/* 10: BTAM */
	IF_VPA + IF_IMM,				/* AM */
	IF_VPA + IF_IMM,				/* SM */
	IF_VPA + IF_IMM,				/* MM */
	IF_VPA + IF_IMM,				/* CM */
	IF_VPA + IF_IMM,				/* TDM */
	IF_VPA + IF_IMM,				/* TFM */
	IF_VPA + IF_IMM,				/* BTM */
	IF_DIV + IF_VPA + IF_IMM,			/* LDM */
	IF_DIV + IF_VPA + IF_IMM,			/* DM */
	IF_MII + IF_VPA + IF_VQA,			/* 20: BTA */
	IF_VPA + IF_VQA,				/* A */
	IF_VPA + IF_VQA,				/* S */
	IF_VPA + IF_VQA,				/* M */
	IF_VPA + IF_VQA,				/* C */
	IF_VPA + IF_VQA,				/* TD */
	IF_VPA + IF_VQA,				/* TF */
	IF_VPA + IF_VQA,				/* BT */
	IF_DIV + IF_VPA + IF_VQA,			/* LD */
	IF_DIV + IF_VPA + IF_VQA,			/* D */
	IF_MII + IF_VPA + IF_VQA,			/* 30: TRNM */
	IF_VPA + IF_VQA,				/* TR */
	IF_VPA,						/* SF */
	IF_VPA,						/* CF */
	IF_VPA,						/* K */
	IF_VPA,						/* DN */
	IF_VPA,						/* RN */
	IF_VPA,						/* RA */
	IF_VPA,						/* WN */
	IF_VPA,						/* WA */
	0,						/* 40 */
	0,						/* NOP */
	0,						/* BB */
	IF_VPA + IF_VQA,				/* BD */
	IF_VPA + IF_VQA,				/* BNF */
	IF_VPA + IF_VQA,				/* BNR */
	IF_VPA,						/* BI */
	IF_VPA,						/* BNI */
	0,						/* H */
	IF_VPA,						/* B */
	0,						/* 50 */
	0,
	0,
	0,
	0,
	IF_VPA + IF_VQA,				/* BNG - disk sys */
	0,
	0,
	0,
	0,
	IF_MII + IF_VPA,				/* 60: BS */
	IF_IDX + IF_VPA + IF_NQX,			/* BX */
	IF_IDX + IF_VPA + IF_IMM,			/* BXM */
	IF_IDX + IF_VPA + IF_NQX,			/* BCX */
	IF_IDX + IF_VPA + IF_IMM,			/* BCXM */
	IF_IDX + IF_VPA + IF_NQX,			/* BLX */
	IF_IDX + IF_VPA + IF_IMM,			/* BLXM */
	IF_IDX + IF_VPA + IF_NQX,			/* BSX */
	0,
	0,
	IF_IDX + IF_VPA + IF_VQA,			/* 70: MA */
	IF_EDT + IF_VPA + IF_VQA,			/* MF */
	IF_EDT + IF_VPA + IF_VQA,			/* MF */
	IF_EDT + IF_VPA + IF_VQA,			/* TNF */
	0,
	0,
	0,
	0,
	0,
	0,
	0,						/* 80 */
	0,
	0,
	0,
	0,
	0,
	0,
	0,
	0,
	0,
	IF_BIN + IF_VPA + IF_4QA,			/* 90: BBT */
	IF_BIN + IF_VPA + IF_4QA,			/* BMK */
	IF_BIN + IF_VPA + IF_VQA,			/* ORF */
	IF_BIN + IF_VPA + IF_VQA,			/* ANDF */
	IF_BIN + IF_VPA + IF_VQA,			/* CPLF */
	IF_BIN + IF_VPA + IF_VQA,			/* EORF */
	IF_BIN + IF_VPA + IF_VQA,			/* OTD */
	IF_BIN + IF_VPA + IF_VQA,			/* DTO */
	0,
	0
 };

/* IO dispatch table */

t_stat (*iodisp[NUM_IO])(uint32 op, uint32 pa, uint32 f0, uint32 f1) = {
	NULL, &tty, &ptp, &ptr, &cdp,			/* 00 - 09 */
	&cdr, NULL, &dp,  NULL, &lpt,
	NULL, NULL, NULL, NULL, NULL,			/* 10 - 19 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 20 - 29 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, &btp, &btr, NULL,			/* 30 - 39 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 40 - 49 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 50 - 59 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 60 - 69 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 70 - 79 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 80 - 89 */
	NULL, NULL, NULL, NULL, NULL,
	NULL, NULL, NULL, NULL, NULL,			/* 90 - 99 */
	NULL, NULL, NULL, NULL, NULL  };

/* Indicator table: -1 = illegal, +1 = resets when tested */

const int32 ind_table[NUM_IND] = {
	-1,  0,  0,  0,  0, -1,  1,  1, -1,  1,		/* 00 - 09 */
	-1,  0,  0,  0,  1,  1,  1,  1, -1,  0,		/* 10 - 19 */
	-1, -1, -1, -1, -1,  0, -1, -1, -1, -1,		/* 20 - 29 */
	 0,  0,  0,  1,  1,  0,  1,  1,  1,  0,		/* 30 - 39 */
	-1, -1,  1, -1, -1, -1, -1, -1, -1, -1,		/* 40 - 49 */
	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,		/* 50 - 59 */
	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,		/* 60 - 69 */
	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,		/* 70 - 79 */
	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,		/* 80 - 89 */
	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1  };	/* 90 - 99 */

/* Add table for 1620 Model 1 */

const uint8 std_add_table[ADD_TABLE_LEN] = {
	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09,
	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x10,
	0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x10, 0x11,
	0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x10, 0x11, 0x12,
	0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x10, 0x11, 0x12, 0x13,
	0x05, 0x06, 0x07, 0x08, 0x09, 0x10, 0x11, 0x12, 0x13, 0x14,
	0x06, 0x07, 0x08, 0x09, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15,
	0x07, 0x08, 0x09, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16,
	0x08, 0x09, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
	0x09, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18  };


/* Add table for 1620 Model 2 ("hardware add") */

const uint8 sum_table[20] = {
	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09,
	0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19  };

/* Multiply table */

const uint8 std_mul_table[MUL_TABLE_LEN] = {
	0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
	0, 0, 1, 0, 2, 0, 3, 0, 4, 0,
	0, 0, 2, 0, 4, 0, 6, 0, 8, 0,
	0, 0, 3, 0, 6, 0, 9, 0, 2, 1,
	0, 0, 4, 0, 8, 0, 2, 1, 6, 1,
	0, 0, 5, 0, 0, 1, 5, 1, 0, 2,
	0, 0, 6, 0, 2, 1, 8, 1, 4, 2,
	0, 0, 7, 0, 4, 1, 1, 2, 8, 2,
	0, 0, 8, 0, 6, 1, 4, 2, 2, 3,
	0, 0, 9, 0, 8, 1, 7, 2, 6, 3,
	0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
	5, 0, 6, 0, 7, 0, 8, 0, 9, 0,
	0, 1, 2, 1, 4, 1, 6, 1, 8, 1,
	5, 1, 8, 1, 1, 2, 4, 2, 7, 2,
	0, 2, 4, 2, 8, 2, 2, 3, 6, 3,
	5, 2, 0, 3, 5, 3, 0, 4, 5, 4,
	0, 3, 6, 3, 2, 4, 8, 4, 4, 5,
	5, 3, 2, 4, 9, 4, 6, 5, 3, 6,
	0, 4, 8, 4, 6, 5, 4, 6, 2, 7,
	5, 4, 4, 5, 3, 6, 2, 7, 1, 8  };

#define BRANCH(x)	PCQ_ENTRY; PC = (x)
#define GET_IDXADDR(x)	((idxb? IDX_B: IDX_A) + ((x) * ADDR_LEN) + (ADDR_LEN - 1))

t_stat sim_instr (void)
{
uint32 PC, pla, qla, f0, f1;
int32 i, t, idx, flags, sta, dev, op;
t_stat reason;

/* Restore saved state */

PC = saved_PC;
if ((cpu_unit.flags & IF_IA) == 0) iae = 0;
if ((cpu_unit.flags & IF_IDX) == 0) idxe = idxb = 0;
upd_ind ();						/* update indicators */
reason = 0;

/* Main instruction fetch/decode loop */

while (reason == 0) {					/* loop until halted */
saved_PC = PC;						/* commit prev instr */
if (sim_interval <= 0) {				/* check clock queue */
	if (reason = sim_process_event ()) break;  }

if (sim_brk_summ && sim_brk_test (PC, SWMASK ('E'))) {	/* breakpoint? */
	reason = STOP_IBKPT;				/* stop simulation */
	break;  }

sim_interval = sim_interval - 1;

/* Instruction fetch and address decode */

if (PC & 1) {						/* PC odd? */
	reason = STOP_INVIAD;				/* stop */
	break;  }

op = get_2d (PC);					/* get opcode */
if (op < 0) {						/* invalid? */
	reason = STOP_INVINS;
	break;  }
flags = op_table[op];					/* get op, flags */
if ((flags & ALLOPT) &&					/* need option? */
   !(flags & ALLOPT & cpu_unit.flags)) {		/* any set? */
	reason = STOP_INVINS;				/* no, error */
	break;  }

pla = ADDR_A (PC, I_PL);				/* P last addr */
qla = ADDR_A (PC, I_QL);				/* Q last addr */
if (flags & IF_VPA) {					/* need P? */
	reason = get_addr (pla, 5, TRUE, &PAR);		/* get P addr */
	if (reason != SCPE_OK) break;  }		/* stop if error */
if (flags & (IF_VQA | IF_4QA | IF_NQX)) {		/* need Q? */
	reason = get_addr (qla,				/* get Q addr */
	    ((flags & IF_4QA)? 4: 5),			/* 4 or 5 digits */
	    ((flags & IF_NQX)? FALSE: TRUE),		/* not or indexed */
	    &QAR);
	if (reason != SCPE_OK) {			/* stop if invalid */
	    reason = reason + (STOP_INVQDG - STOP_INVPDG);
	    break;  }  }
else if (flags & IF_IMM) QAR = qla;			/* immediate? */
PC = PC + INST_LEN;					/* advance PC */
switch (op) {						/* case on op */

/* Transmit digit - P,Q are valid */

case OP_TD:
case OP_TDM:
	M[PAR] = M[QAR] & (FLAG | DIGIT);		/* move dig, flag */
	break;

/* Transmit field - P,Q are valid */

case OP_TF:
case OP_TFM:
	reason = xmt_field (PAR, QAR, 1);		/* xmit field */
	break;

/* Transmit record - P,Q are valid */

case OP_TR:
	reason = xmt_record (PAR, QAR, TRUE);		/* xmit record */
	break;

/* Transmit record no record mark - P,Q are valid */

case OP_TRNM:
	reason = xmt_record (PAR, QAR, FALSE);		/* xmit record but */
	break;						/* not rec mark */

/* Set flag - P is valid */

case OP_SF:
	M[PAR] = M[PAR] | FLAG;				/* set flag on P */
	break;

/* Clear flag - P is valid */

case OP_CF:
	M[PAR] = M[PAR] & ~FLAG;			/* clear flag on P */
	break;

/* Branch - P is valid */

case OP_B:
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch and transmit - P,Q are valid */

case OP_BT:
case OP_BTM:
	reason = xmt_field (ADDR_S (PAR, 1), QAR, 1);	/* xmit field to P-1 */
	IR2 = PC;					/* save PC */
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch and transmit floating - P,Q are valid */

case OP_BTFL:
	reason = xmt_field (ADDR_S (PAR, 1), QAR, 3);	/* skip 3 flags */
	IR2 = PC;					/* save PC */
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch and transmit address - P,Q are valid */

case OP_BTA:
case OP_BTAM:
	reason = xmt_field (ADDR_S (PAR, 1), QAR, 4);	/* skip 4 flags */
	IR2 = PC;					/* save PC */
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch back */

case OP_BB:
	if (PR1 != 1) {					/* PR1 valid? */
	    BRANCH (PR1);				/* return to PR1 */
	    PR1 = 1;  }					/* invalidate */
	else if (IR2 != 1) {				/* IR2 valid? */
	    BRANCH (IR2);				/* return to IR2 */
	     IR2 = 1;  }				/* invalidate */
	else reason = STOP_INVRTN;			/* MAR check */
	break;

/* Branch on digit (zero) - P,Q are valid */

case OP_BD:
	if ((M[QAR] & DIGIT) == 0) {			/* digit == 0? */
	    BRANCH (PAR);  }				/* branch */
	break;

/* Branch no flag - P,Q are valid */

case OP_BNF:
	if ((M[QAR] & FLAG) == 0) {			/* flag == 0? */
	    BRANCH (PAR);  }				/* branch */
	break;

/* Branch no record mark (8-2 not set) - P,Q are valid */

case OP_BNR:
	if ((M[QAR] & REC_MARK) != REC_MARK) {		/* not rec mark? */
	    BRANCH (PAR);  }				/* branch */
	break;

/* Branch no group mark - P,Q are valid */

case OP_BNG:
	if ((M[QAR] & DIGIT) != GRP_MARK) {		/* not grp mark? */
	    BRANCH (PAR);  }				/* branch */
	break;

/* Branch (no) indicator - P is valid */

case OP_BI:
case OP_BNI:
	upd_ind ();					/* update indicators */
	t = get_2d (ADDR_A (saved_PC, I_BR));		/* get ind number */
	if ((t < 0) || (ind_table[t] < 0)) {		/* not valid? */
	    reason = STOP_INVIND;			/* stop */
	    break;  }
	if ((ind[t] != 0) ^ (op == OP_BNI)) {		/* ind value correct? */
	    BRANCH (PAR);  }				/* branch */
	if (ind_table[t] > 0) ind[t] = 0;		/* reset if needed */
	break;

/* Add/subtract/compare - P,Q are valid */

case OP_A:
case OP_AM:
	reason = add_field (PAR, QAR, FALSE, TRUE, &sta); /* add, store */
	if (sta == ADD_CARRY) ind[IN_OVF] = 1;		/* cout => ovflo */
	if (ar_stop && ind[IN_OVF]) reason = STOP_OVERFL;
	break;

case OP_S:
case OP_SM:
	reason = add_field (PAR, QAR, TRUE, TRUE, &sta); /* sub, store */
	if (sta == ADD_CARRY) ind[IN_OVF] = 1;		/* cout => ovflo */
	if (ar_stop && ind[IN_OVF]) reason = STOP_OVERFL;
	break;

case OP_C:
case OP_CM:
	reason = add_field (PAR, QAR, TRUE, FALSE, &sta); /* sub, nostore */
	if (sta == ADD_CARRY) ind[IN_OVF] = 1;		/* cout => ovflo */
	if (ar_stop && ind[IN_OVF]) reason = STOP_OVERFL;
	break;

/* Multiply - P,Q are valid */

case OP_M:
case OP_MM:
	reason = mul_field (PAR, QAR);			/* multiply */
	break;

/* IO instructions - P is valid */

case OP_RA:
case OP_WA:
	if ((PAR & 1) == 0) {				/* P even? */
	    reason = STOP_INVEAD;			/* stop */
	    break;  }
case OP_K:
case OP_DN:
case OP_RN:
case OP_WN:
	dev = get_2d (ADDR_A (saved_PC, I_IO));		/* get IO dev */
	f0 = M[ADDR_A (saved_PC, I_CTL)] & DIGIT;	/* get function */
	f1 = M[ADDR_A (saved_PC, I_CTL + 1)] & DIGIT;
	if ((dev < 0) || (iodisp[dev] == NULL))		/* undefined dev? */
	    reason = STOP_INVIO;			/* stop */
	else reason = iodisp[dev] (op, PAR, f0, f1);	/* call device */
	break;

/* Divide special feature instructions */

case OP_LD:
case OP_LDM:
	for (i = 0; i < PROD_AREA_LEN; i++)		/* clear prod area */
	    M[PROD_AREA + i] = 0;
	t = M[QAR] & FLAG;				/* save Q sign */
	reason = xmt_divd (PAR, QAR);			/* xmit dividend */
	M[PROD_AREA + PROD_AREA_LEN - 1] |= t;		/* set sign */
	break;

/* Divide - P,Q are valid */

case OP_D:
case OP_DM:
	reason = div_field (PAR, QAR, &t);		/* divide */
	ind[IN_EZ] = t;					/* set indicator */
	if ((reason == STOP_OVERFL) && !ar_stop)	/* ovflo stop? */
		reason = SCPE_OK;			/* no */
	break;

/* Edit special feature instructions */

/* Move flag - P,Q are valid */

case OP_MF:
	M[PAR] = (M[PAR] & ~FLAG) | (M[QAR] & FLAG);	/* copy Q flag */
	M[QAR] = M[QAR] & ~FLAG;			/* clr Q flag */
	break;

/* Transmit numeric strip - P,Q are valid, P is source */

case OP_TNS:
	if ((PAR & 1) == 0) {				/* P must be odd */
	    reason = STOP_INVEAD;
	    break;  }
	reason = xmt_tns (QAR, PAR);			/* xmit and strip */
	break;

/* Transmit numeric fill - P,Q are valid */

case OP_TNF:
	if ((PAR & 1) == 0) {				/* P must be odd */
	    reason = STOP_INVEAD;
	    break;  }
	reason = xmt_tnf (PAR, QAR);			/* xmit and strip */
	break;

/* Index special feature instructions */

/* Move address - P,Q are valid */

case OP_MA:
	for (i = 0; i < ADDR_LEN; i++) {		/* move 5 digits */
	    M[PAR] = (M[PAR] & FLAG) | (M[QAR] & DIGIT);
	    MM (PAR); MM (QAR);  }
	break;

/* Branch load index - P,Q are valid, Q not indexed */

case OP_BLX:
case OP_BLXM:
	idx = get_idx (ADDR_A (saved_PC, I_QL - 1));	/* get index */
	if (idx < 0) {					/* invalid? */
	    reason = STOP_INVIDX;			/* stop for now */
	    break;  }
	xmt_index (GET_IDXADDR (idx), QAR);		/* copy Q to idx */
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch store index - P,Q are valid, Q not indexed */

case OP_BSX:
	idx = get_idx (ADDR_A (saved_PC, I_QL - 1));	/* get index */
	if (idx < 0) {					/* invalid? */
	    reason = STOP_INVIDX;			/* stop for now */
	    break;  }
	xmt_index (QAR, GET_IDXADDR (idx));		/* copy idx to Q */
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch and modify index - P,Q are valid, Q not indexed */

case OP_BX:
case OP_BXM:
	idx = get_idx (ADDR_A (saved_PC, I_QL - 1));	/* get index */
	if (idx < 0) {					/* invalid? */
	    reason = STOP_INVIDX;			/* stop for now */
	    break;  }
	reason = add_field (GET_IDXADDR (idx), QAR, FALSE, TRUE, &sta);
	if (ar_stop && ind[IN_OVF]) reason = STOP_OVERFL;
	BRANCH (PAR);					/* branch to P */
	break;

/* Branch conditionally and modify index - P,Q are valid, Q not indexed */

case OP_BCX:
case OP_BCXM:
	idx = get_idx (ADDR_A (saved_PC, I_QL - 1));	/* get index */
	if (idx < 0) {					/* invalid? */
	    reason = STOP_INVIDX;			/* stop for now */
	    break;  }
	reason = add_field (GET_IDXADDR (idx), QAR, FALSE, TRUE, &sta);
	if (ar_stop && ind[IN_OVF]) reason = STOP_OVERFL;
	if ((ind[IN_EZ] == 0) && (sta == ADD_NOCRY)) {	/* ~z, ~c, ~schg? */
	    BRANCH (PAR);  }				/* branch */
	break;

/* Branch and select - P is valid */

case OP_BS:
	t = M[ADDR_A (saved_PC, I_SEL)] & DIGIT;	/* get select */
	switch (t) {					/* case on select */
	case 0:
		idxe = idxb = 0;			/* indexing off */
		break;
	case 1:
		idxe = 1; idxb = 0;			/* index band A */
		break;
	case 2:
		idxe = idxb = 1;			/* index band B */
		break;
	case 8:
		iae = 0;				/* indirect off */
		break;
	case 9:
		iae = 1;				/* indirect on */
		break;
	default:
		reason = STOP_INVSEL;			/* undefined */
		break;  }
	BRANCH (PAR);
	break;

/* Binary special feature instructions */

/* Branch on bit - P,Q are valid, Q is 4d address */

case OP_BBT:
	t = M[ADDR_A (saved_PC, I_Q)];			/* get Q0 digit */
	if (t & M[QAR] & DIGIT) {			/* match to mem? */
	    BRANCH (PAR);  }				/* branch */
	break;

/* Branch on mask - P,Q are valid, Q is 4d address */

case OP_BMK:
	t = M[ADDR_A (saved_PC, I_Q)];			/* get Q0 digit */
	if (((t ^ M[QAR]) &				/* match to mem? */
	    ((t & FLAG)? (FLAG + DIGIT): DIGIT)) == 0) {
	    BRANCH (PAR);  }				/* branch */
	break;

/* Or - P,Q are valid */

case OP_ORF:
	reason = or_field (PAR, QAR);			/* OR fields */
	break;

/* AND - P,Q are valid */

case OP_ANDF:
	reason = and_field (PAR, QAR);			/* AND fields */
	break;

/* Exclusive or - P,Q are valid */

case OP_EORF:
	reason = xor_field (PAR, QAR);			/* XOR fields */
	break;

/* Complement - P,Q are valid */

case OP_CPLF:
	reason = com_field (PAR, QAR);			/* COM field */
	break;

/* Octal to decimal - P,Q are valid */

case OP_OTD:
	reason = oct_to_dec (PAR, QAR);			/* convert */
	break;

/* Decimal to octal - P,Q are valid */

case OP_DTO:
	reason = dec_to_oct (PAR, QAR, &t);		/* convert */
	ind[IN_EZ] = t;					/* set indicator */
	if (ar_stop && ind[IN_OVF]) reason = STOP_OVERFL;
	break;

/* Floating point special feature instructions */

case OP_FADD:
	reason = fp_add (PAR, QAR, FALSE);		/* add */
	if (ar_stop && ind[IN_EXPCHK]) reason = STOP_EXPCHK;
	break;

case OP_FSUB:
	reason = fp_add (PAR, QAR, TRUE);		/* subtract */
	if (ar_stop && ind[IN_EXPCHK]) reason = STOP_EXPCHK;
	break;

case OP_FMUL:
	reason = fp_mul (PAR, QAR);			/* multiply */
	if (ar_stop && ind[IN_EXPCHK]) reason = STOP_EXPCHK;
	break;

case OP_FDIV:
	reason = fp_div (PAR, QAR);			/* divide */
	if (ar_stop && ind[IN_OVF]) reason = STOP_FPDVZ;
	if (ar_stop && ind[IN_EXPCHK]) reason = STOP_EXPCHK;
	break;

case OP_FSL:
	reason = fp_fsl (PAR, QAR);			/* shift left */
	break;

case OP_FSR:
	reason = fp_fsr (PAR, QAR);			/* shift right */
	break;

/* Halt */

case OP_H:
	saved_PC = PC;					/* commit inst */
	reason = STOP_HALT;				/* stop */
	break;

/* NOP */

case OP_NOP:
	break;

/* Invalid instruction code */

default:
	reason = STOP_INVINS;				/* stop */
	break;  }					/* end switch */
	}						/* end while */

/* Simulation halted */

pcq_r->qptr = pcq_p;					/* update pc q ptr */
upd_ind ();
return reason;
}

/* Utility routines */

/* Get 2 digit field

   Inputs:
	ad	=	address of high digit
   Outputs:
	val	=	field converted to binary
			-1 if bad digit
*/

int32 get_2d (uint32 ad)
{
int32 d, d1;

d = M[ad] & DIGIT;					/* get 1st digit */
d1 = M[ADDR_A (ad, 1)] & DIGIT;				/* get 2nd digit */
if (BAD_DIGIT (d) || BAD_DIGIT (d1)) return -1;		/* bad? error */
return ((d * 10) + d1);					/* cvt to binary */
}

/* Get address routine

   Inputs:
	alast	=	address of low digit
	lnt	=	length
	indexok	=	TRUE if indexing allowed
	&addr	=	pointer to address output
   Output:
	return	=	error status (in terms of P address)
	addr	=	address converted to binary

   Notes:
   - If indexing produces a negative result, the effective address is
     the 10's complement of the result
   - An address that exceeds memory produces a MAR check stop
*/

t_stat get_addr (uint32 alast, int32 lnt, t_bool indexok, uint32 *reta)
{
uint8 indir;
int32 cnt, idx, idxa, idxv, addr;

if (iae) indir = FLAG;					/* init indirect */
else indir = 0;

cnt = 0;						/* count depth */
do {	indir = indir & M[alast];			/* get indirect */
	if (cvt_addr (alast, lnt, FALSE, &addr))	/* cvt addr to bin */
	    return STOP_INVPDG;				/* bad? */
	idx = get_idx (ADDR_S (alast, 1));		/* get index addr */
	if (indexok && (idx > 0)) {			/* indexable? */
	    idxa = GET_IDXADDR (idx);			/* get idx addr */
	    if (cvt_addr (idxa, ADDR_LEN, TRUE, &idxv))	/* cvt idx */
		return STOP_INVPDG;
	    addr = addr + idxv;				/* add in index */
	    if (addr < 0) addr = addr + 100000;  }	/* -? 10's comp */
	if (addr >= (int32) MEMSIZE) return STOP_INVPAD;/* invalid addr? */
	alast = addr;					/* new address */
	lnt = ADDR_LEN;  }				/* std len */
while (indir && (cnt++ < ind_max));
if (cnt > ind_max) return STOP_INVPIA;			/* indir too deep? */
*reta = addr;						/* return address */
return SCPE_OK;
}

/* Convert address to binary

   Inputs:
	alast	=	address of low digit
	lnt	=	length
	signok	=	TRUE if signed
	val	=	address of output
   Outputs:
	status	=	0 if ok, != 0 if error
*/

t_stat cvt_addr (uint32 alast, int32 lnt, t_bool signok, int32 *val)
{
int32 sign = 0, addr = 0, t;

if (signok && (M[alast] & FLAG)) sign = 1;		/* signed? */
alast = alast - lnt;					/* find start */
do {	PP (alast);					/* incr mem addr */
	t = M[alast] & DIGIT;				/* get digit */
	if (BAD_DIGIT (t)) return STOP_INVDIG;		/* bad? error */
	addr = (addr * 10) + t;  }			/* cvt to bin */
while (--lnt > 0);
if (sign) *val = -addr;					/* minus? */
else *val = addr;
return SCPE_OK;
}

/* Get index register number

   Inputs:
	aidx	=	address of low digit
   Outputs:
	index	=	>0 if indexed
			=0 if not indexed
			<0 if indexing disabled
*/

t_stat get_idx (uint32 aidx)
{
int32 i, idx = 0;

if (idxe == 0) return -1;				/* indexing off? */
for (i = 0; i < 3; i++) {				/* 3 flags worth */
	if (M[aidx] & FLAG) idx = idx | (1 << i);	/* test flag */
	MM (aidx);  }					/* next digit */
return idx;
}

/* Update indicators routine */

void upd_ind (void)
{
ind[IN_HPEZ] = ind[IN_HP] | ind[IN_EZ];			/* HPEZ = HP | EZ */
ind[IN_DERR] = ind[IN_DACH] | ind[IN_DWLR] | ind[IN_DCYO];
ind[IN_ANYCHK] = ind[IN_RDCHK] | ind[IN_WRCHK] |	/* ANYCHK = all chks */
	ind[IN_MBREVEN] | ind[IN_MBRODD] |
	ind[IN_PRCHK] | ind[IN_DACH];
ind[IN_IXN] = ind[IN_IXA] = ind[IN_IXB] = 0;		/* clr index indics */
if (!idxe) ind[IN_IXN] = 1;				/* off? */
else if (!idxb) ind[IN_IXA] = 1;			/* on, band A? */
else ind[IN_IXB] = 1; 					/* no, band B */
return;
}

/* Transmit routines */

/* Transmit field from 's' to 'd' - ignore first 'skp' flags */

t_stat xmt_field (uint32 d, uint32 s, uint32 skp)
{
t_addr cnt = 0;
uint8 t;

do {	t = M[d] = M[s] & (FLAG | DIGIT);		/* copy src to dst */
	MM (d); MM (s);					/* decr mem addrs */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while (((t & FLAG) == 0) || (cnt <= skp));		/* until flag */
return SCPE_OK;
}

/* Transmit record from 's' to 'd' - copy record mark if 'cpy' = TRUE */

t_stat xmt_record (uint32 d, uint32 s, t_bool cpy)
{
t_addr cnt = 0;

while ((M[s] & REC_MARK) != REC_MARK) {			/* until rec mark */
	M[d] = M[s] & (FLAG | DIGIT);			/* copy src to dst */
	PP (d); PP (s);					/* incr mem addrs */
	if (cnt++ >= MEMSIZE) return STOP_RWRAP;  }	/* (stop runaway) */
if (cpy) M[d] = M[s] & (FLAG | DIGIT);			/* copy rec mark */
return SCPE_OK;
}

/* Transmit index from 's' to 'd' - fixed five character field */

t_stat xmt_index (uint32 d, uint32 s)
{
int32 i;

M[d] = M[s] & (FLAG | DIGIT);				/* preserve sign */
MM (d); MM (s);						/* decr mem addrs */
for (i = 0; i < ADDR_LEN - 2; i++) {			/* copy 3 digits */
	M[d] = M[s] & DIGIT;				/* without flags */
	MM (d); MM (s);  }				/* decr mem addrs */
M[d] = (M[s] & DIGIT) | FLAG;				/* set flag on last */
return SCPE_OK;
}

/* Transmit dividend from 'd' to 's' - clear flag on first digit */

t_stat xmt_divd (uint32 d, uint32 s)
{
t_addr cnt = 0;

M[d] = M[s] & DIGIT;					/* first w/o flag */
do {	MM (d); MM (s);					/* decr mem addrs */
	M[d] = M[s] & (FLAG | DIGIT);			/* copy src to dst */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while ((M[d] & FLAG) == 0);				/* until src flag */
return SCPE_OK;
}

/* Transmit numeric strip from 's' to 'd' - s is odd */

t_stat xmt_tns (uint32 d, uint32 s)
{
t_addr cnt = 0;
uint8 t, z;

t = M[s] & DIGIT;					/* get units */
z = M[s - 1] & DIGIT;					/* get zone */
if ((z == 1) || (z == 5) || ((z == 2) && (t == 0)))	/* 1x, 5x, 20? */
	M[d] = t | FLAG;				/* set flag */
else M[d] = t;						/* else clear flag */
do {	MM (d);						/* decr mem addrs */
	s = ADDR_S (s, 2);
	t = M[d] & FLAG;				/* save dst flag */
	M[d] = M[s] & (FLAG | DIGIT);			/* copy src to dst */
	if (cnt >= MEMSIZE) return STOP_FWRAP;		/* (stop runaway) */
	cnt = cnt + 2;  }
while (t == 0);						/* until dst flag */
M[d] = M[d] | FLAG;					/* set flag at end */
return SCPE_OK;
}

/* Transmit numeric fill from 's' to 'd' - d is odd */

t_stat xmt_tnf (uint32 d, uint32 s)
{
t_addr cnt = 0;
uint8 t;

t = M[s];						/* get 1st digit */
M[d] = t & DIGIT;					/* store */
M[d - 1] = (t & FLAG)? 5: 7;				/* set sign from flag */
do {	MM (s);						/* decr mem addr */
	d = ADDR_S (d, 2);
	t = M[s];					/* get src digit */
	M[d] = t & DIGIT;				/* move to dst, no flag */
	M[d - 1] = 7;					/* set zone */
	if (cnt >= MEMSIZE) return STOP_FWRAP;		/* (stop runaway) */
	cnt = cnt + 2;  }
while ((t & FLAG) == 0);				/* until src flag */
return SCPE_OK;
}

/* Add routine

   Inputs:
	d	=	destination field low (P)
	s	=	source field low (Q)
	sub	=	TRUE if subtracting
	sto	=	TRUE if storing
   Output:
	return	=	status
	sta	=	ADD_NOCRY: no carry out, no sign change
			ADD_SCHNG: sign change
			ADD_CARRY: carry out

   Reference Manual: "When the sum is zero, the sign of the P field
   is retained."
*/

t_stat add_field (uint32 d, uint32 s, t_bool sub, t_bool sto, int32 *sta)
{
uint32 cry, src, dst, res, comp, dp, dsv;
uint32 src_f = 0, cnt = 0, dst_f;

*sta = ADD_NOCRY;					/* assume no cry */
dsv = d;						/* save dst */
comp = ((M[d] ^ M[s]) & FLAG) ^ (sub? FLAG: 0);		/* set compl flag */
cry = 0;						/* clr carry */
ind[IN_HP] = ((M[d] & FLAG) == 0);			/* set sign from res */
ind[IN_EZ] = 1;						/* assume zero */

dst = M[d] & DIGIT;					/* 1st digits */
src = M[s] & DIGIT;
if (BAD_DIGIT (dst) || BAD_DIGIT (src))			/* bad digit? */
     return STOP_INVDIG;
if (comp) src = 10 - src;				/* complement? */
res = add_one_digit (dst, src, &cry);			/* add */
if (sto) M[d] = (M[d] & FLAG) | res;			/* store */
MM (d);	MM (s);						/* decr mem addrs */
do {	dst = M[d] & DIGIT;				/* get dst digit */
	dst_f = M[d] & FLAG;				/* get dst flag */
	if (src_f) src = 0;				/* src done? src = 0 */
	else {
	    src = M[s] & DIGIT;				/* get src digit */
	    src_f = M[s] & FLAG;			/* get src flag */
	    MM (s);  } 					/* decr src addr */
	if (BAD_DIGIT (dst) || BAD_DIGIT (src))		/* bad digit? */
	    return STOP_INVDIG;
	if (comp) src = 9 - src;			/* complement? */
	res = add_one_digit (dst, src, &cry);		/* add */
	if (sto) M[d] = dst_f | res;			/* store */
	MM (d);						/* decr dst addr */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while (dst_f == 0);					/* until dst done */
if (!src_f) ind[IN_OVF] = 1;				/* !src done? ovf */
if (comp && !cry && !ind[IN_EZ]) {			/* recomp needed? */
	ind[IN_HP] = ind[IN_HP] ^ 1;			/* flip indicator */
	if (sto) {					/* storing? */
	    for (cry = 1, dp = dsv; dp != d; ) {	/* rescan */
		dst = M[dp] & DIGIT;			/* get dst digit */
		res = add_one_digit (9 - dst, 0, &cry);	/* "add" */
		M[dp] = (M[dp] & FLAG) | res;		/* store */
		MM (dp);  }				/* decr dst addr */
	    M[dsv] = M[dsv] ^ FLAG;  } 			/* compl sign */
	*sta = ADD_SIGNC;				/* sign changed */
	return SCPE_OK;  }				/* end if recomp */
if (ind[IN_EZ]) ind[IN_HP] = 0;				/* res = 0? clr HP */
if (!comp && cry) *sta = ADD_CARRY;			/* set status */
return SCPE_OK;
}

/* Add one digit via table (Model 1) or "hardware" (Model 2) */

uint32 add_one_digit (uint32 dst, uint32 src, uint32 *cry)
{
uint32 res;

if (*cry) src = src + 1;				/* cry in? incr src */
if (src >= 10) {					/* src > 10? */
	src = src - 10;					/* src -= 10 */
	*cry = 1;  }					/* carry out */
else *cry = 0;						/* else no carry */
if (cpu_unit.flags & IF_MII)				/* Model 2? */
	res = sum_table[dst + src];			/* "hardware" */
else res = M[ADD_TABLE + (dst * 10) + src];		/* table lookup */
if (res & FLAG) *cry = 1;				/* carry out? */
if (res & DIGIT) ind[IN_EZ] = 0;			/* nz? clr ind */
return res & DIGIT;
}

/* Multiply routine 

   Inputs:
	mpc	=	multiplicand address
	mpy	=	multiplier address
   Outputs:
	return	=	status

   Reference manual: "A zero product may have a negative or positive sign,
   depending on the signs of the fields at the P and Q addresses."
*/

t_stat mul_field (uint32 mpc, uint32 mpy)
{
int32 i;
uint32 pro;						/* prod pointer */
uint32 mpyd, mpyf;					/* mpy digit, flag */
t_addr cnt = 0;						/* counter */
uint8 sign;						/* final sign */
t_stat r;

PR1 = 1;						/* step on PR1 */
for (i = 0; i < PROD_AREA_LEN; i++)			/* clr prod area */
	M[PROD_AREA + i] = 0;
sign = (M[mpc] & FLAG) ^ (M[mpy] & FLAG);		/* get final sign */
ind[IN_HP] = (sign == 0);				/* set indicators */
ind[IN_EZ] = 1;
pro = PROD_AREA + PROD_AREA_LEN - 1;			/* product ptr */

/* Loop on multiplier (mpy) and product (pro) digits */

do {	mpyd = M[mpy] & DIGIT;				/* multiplier digit */
	mpyf = (M[mpy] & FLAG) && (cnt != 0);		/* last digit flag */
	if (BAD_DIGIT (mpyd)) return STOP_INVDIG;	/* bad? */
	r = mul_one_digit (mpyd, mpc, pro, mpyf);	/* prod += mpc*mpy_dig */
	if (r != SCPE_OK) return r;			/* error? */
	MM (mpy); MM (pro);				/* decr mpyr, prod addrs */
	if (cnt++ > MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while ((mpyf == 0) || (cnt <= 1));			/* until mpyr flag */

if (ind[IN_EZ]) ind[IN_HP] = 0;				/* res = 0? clr HP */
M[PROD_AREA + PROD_AREA_LEN - 1] |= sign;		/* set final sign */
return SCPE_OK;
}

/* Multiply step

   Inputs:
	mpyd	=	multiplier digit (tested valid)
	mpcp	=	multiplicand low address
	prop	=	product low address
	last	=	last iteration flag (set flag on high product)
   Outputs:
	prod	+=	multiplicand * multiplier_digit
	return	=	status

   The multiply table address is constructed as follows:
   - double the multiplier digit
   - use the 10's digit of the doubled result, + 1, as the 100's digit
     of the table address
   - use the multiplicand digit as the 10's digit of the table address
   - use the unit digit of the doubled result as the unit digit of the
     table address
   EZ indicator is cleared if a non-zero digit is ever generated
*/

t_stat mul_one_digit (uint32 mpyd, uint32 mpcp, uint32 prop, uint32 last)
{
uint32 mpta, mptb;					/* mult table */
uint32 mptd;						/* mult table digit */
uint32 mpcd, mpcf;					/* mpc digit, flag */
uint32 prwp;						/* prod working ptr */
uint32 prod;						/* product digit */
uint32 cry;						/* carry */
t_addr mpcc, cryc;					/* counters */

mptb = MUL_TABLE + ((mpyd <= 4)? (mpyd * 2):		/* set mpy table 100's, */
	(((mpyd - 5) * 2) + 100));			/* 1's digits */

/* Inner loop on multiplicand (mpcp) and product (prop) digits */

mpcc = 0;						/* multiplicand ctr */
do {	prwp = prop;					/* product working ptr */
	mpcd = M[mpcp] & DIGIT;				/* multiplicand digit */
	mpcf = M[mpcp] & FLAG;				/* multiplicand flag */
	if (BAD_DIGIT (mpcd)) return STOP_INVDIG;	/* bad? */
	mpta = mptb + (mpcd * 10);			/* mpy table 10's digit */
	cry = 0;					/* init carry */
	mptd = M[mpta] & DIGIT;				/* mpy table digit */
	if (BAD_DIGIT (mptd)) return STOP_INVDIG;	/* bad? */
	prod = M[prwp] & DIGIT;				/* product digit */
	if (BAD_DIGIT (prod)) return STOP_INVDIG;	/* bad? */
	M[prwp] = add_one_digit (prod, mptd, &cry);	/* add mpy tbl to prod */
	MM (prwp);					/* decr working ptr */
	mptd = M[mpta + 1] & DIGIT;			/* mpy table digit */
	if (BAD_DIGIT (mptd)) return STOP_INVDIG;	/* bad? */
	prod = M[prwp] & DIGIT;				/* product digit */
	if (BAD_DIGIT (prod)) return STOP_INVDIG;	/* bad? */
	M[prwp] = add_one_digit (prod, mptd, &cry);	/* add mpy tbl to prod */
	cryc = 0;					/* (stop runaway) */
	while (cry) {					/* propagate carry */
	    MM (prwp);					/* decr working ptr */
	    prod = M[prwp] & DIGIT;			/* product digit */
	    if (BAD_DIGIT (prod)) return STOP_INVDIG;	/* bad? */
	    M[prwp] = add_one_digit (prod, 0, &cry);	/* add cry */
	    if (cryc++ > MEMSIZE) return STOP_FWRAP;  }
	MM (mpcp); MM (prop);				/* decr mpc, prod ptrs */
	if (mpcc++ > MEMSIZE) return STOP_FWRAP;  }
while ((mpcf == 0) || (mpcc <= 1));			/* until mpcf flag */
if (last) 
	M[prop] = M[prop] | FLAG;			/* flag high product */
return SCPE_OK;
}

/* Divide routine - comments from Geoff Kuenning's 1620 simulator

   The destination of the divide is given by:

	100 - <# digits in quotient>

   Which is more easily calculated as:

	100 - <# digits in divisor> - <# digits in dividend>

   The quotient goes into 99 minus the divisor length.  The
   remainder goes into 99.  The load dividend instruction (above)
   should have specified a P address of 99 minus the size of the
   divisor.

   Note that this all implies that "dest" points to the *leftmost*
   digit of the dividend.

   After the division, the assumed decimal point will be as many
   positions to the left as there are digits in the divisor.  In
   other words, a 4-digit divisor will produce 4 (assumed) decimal
   places.

   There are other ways to do these things.  In particular, the
   load-dividend instruction doesn't have to specify the above
   formula; if it's done differently, then you don't have to get
   decimal places.  This is not well-explained in the books I have.

   How to divide on a 1620:

   The dividend is the field at 99:

	    90 = _1234567890

   The divisor is somewhere else in memory:

	    _03

   The divide operation specifies the left-most digit of the
   dividend as the place to begin trial subtractions:

	    DM	90,3

   The loop works as follows:

  	1.  Call the left-most digit of the dividend "current_dividend".
  	    Call the location current_dividend - <divisor_length>
  	    "quotient_digit".
  	2.  Clear the flag at current_dividend, and set one at
  	    quotient_digit.

  		88 = _001234567890, q_d = 88, c_d = 90
  	    [Not actually done; divisor length controls subtract.]
  	3.  Subtract the divisor from the field at current-dividend,
  	    using normal 1620 rules, except that signs are ignored.
  	    Continue these subtractions until either 10 subtractions
  	    have been done, or you get a negative result:

  		88 = _00_2234567890, q_d = 88, c_d = 90
  	4.  If 10 subtractions have been done, set the overflow
  	    indicator and abort.  Otherwise, add the divisor back to
  	    correct for the oversubtraction:

  		88 = _001234567890, q_d = 88, c_d = 90
  	5.  Store the (net) number of subtractions in quotient_digit:

  		88 = _001234567890, q_d = 88, c_d = 90
  	6.  If this is not the first pass, clear the flag at
  	    quotient_digit.  Increment quotient_digit and
  	    current_dividend, and set a flag at the new
  	    quotient_digit:

  		88 = _0_01234567890, q_d = 89, c_d = 91
  	    [If first pass, set a flag at quotient digit.]
  	7.  If current_dividend is not 100, repeat steps 3 through 7.
  	8.  Set flags at 99 and quotient_digit - 1 according to the
  	    rules of algebra:  the quotient's sign is the exclusive-or
  	    of the signs of the divisor and dividend, and the
  	    remainder has the sign of the dividend:

  		 10 /  3 =  3 remainder  1
  		 10 / -3 = -3 remainder  1
  		-10 /  3 = -3 remainder -1
  		-10 / -3 =  3 remainder -1
  
  	    This preserves the relationship dd = q * dv + r.

   Our example continues as follows for steps 3 through 7:
  
  	    3.	88 = _0_00_334567890, q_d = 89, c_d = 91
  	    4.	88 = _0_00034567890
  	    5.	88 = _0_40034567890
  	    6.	88 = _04_0034567890, q_d = 90, c_d = 92
  	    3.	88 = _04_00_34567890
  	    4.	88 = _04_0004567890
  	    5.	88 = _04_1004567890
  	    6.	88 = _041_004567890, q_d = 91, c_d = 93
  	    3.	88 = _041_00_2567890
  	    4.	88 = _041_001567890
  	    5.	88 = _041_101567890
  	    6.	88 = _0411_01567890, q_d = 92, c_d = 94
  	    3.	88 = _0411_00_367890
  	    4.	88 = _0411_00067890
  	    5.	88 = _0411_50067890
  	    6.	88 = _04115_0067890, q_d = 93, c_d = 95
  	    3.	88 = _04115_00_37890
  	    4.	88 = _04115_0007890
  	    5.	88 = _04115_2007890
  	    6.	88 = _041152_007890, q_d = 94, c_d = 96
  	    3.	88 = _041152_00_2890
  	    4.	88 = _041152_001890
  	    5.	88 = _041152_201890
  	    6.	88 = _0411522_01890, q_d = 95, c_d = 97
  	    3.	88 = _0411522_00_390
  	    4.	88 = _0411522_00090
  	    5.	88 = _0411522_60090
  	    6.	88 = _04115226_0090, q_d = 96, c_d = 98
  	    3.	88 = _04115226_00_30
  	    4.	88 = _04115226_0000
  	    5.	88 = _04115226_3000
  	    6.	88 = _041152263_000, q_d = 97, c_d = 99
  	    3.	88 = _041152263_00_3
  	    4.	88 = _041152263_000
  	    5.	88 = _041152263_000
  	    6.	88 = _0411522630_00, q_d = 98, c_d = 100

   In the actual code below, we elide several of these steps in
   various ways for convenience and efficiency.

   Note that the EZ indicator is NOT valid for divide, because it
   is cleared by any non-zero result in an intermediate add.  The
   code maintains its own EZ indicator for the quotient.
*/

t_stat div_field (uint32 dvd, uint32 dvr, int32 *ez)
{
uint32 quop, quod, quos;				/* quo ptr, dig, sign */
uint32 dvds;						/* dvd sign */
t_bool first = TRUE;					/* first pass */
t_stat r;

dvds = (M[PROD_AREA + PROD_AREA_LEN - 1]) & FLAG;	/* dividend sign */
quos = dvds ^ (M[dvr] & FLAG);				/* quotient sign */
ind[IN_HP] = (quos == 0);				/* set indicators */
*ez = 1;

/* Loop on current dividend, high order digit at dvd */

do {	r = div_one_digit (dvd, dvr, 10, &quod, &quop);	/* dev quo digit */
	if (r != SCPE_OK) return r;			/* error? */

/* Store quotient digit and advance current dividend pointer */

	if (first) {					/* first pass? */
	    if (quod >= 10) {				/* overflow? */
		ind[IN_OVF] = 1;			/* set indicator */
		return STOP_OVERFL;  }			/* stop */
	    M[quop] = FLAG | quod;			/* set flag on quo */
	    first = FALSE;  }
	else M[quop] = quod;				/* store quo digit */
	if (quod) *ez = 0;				/* if nz, clr ind */
	PP (dvd);  }					/* incr dvd ptr */
while (dvd != (PROD_AREA + PROD_AREA_LEN));		/* until end prod */

/* Division done.  Set signs of quo, rem, set flag on high order remainder */

if (*ez) ind[IN_HP] = 0;				/* res = 0? clr HP */
M[PROD_AREA + PROD_AREA_LEN - 1] |= dvds;		/* remainder sign */
M[quop] = M[quop] | quos;				/* quotient sign */
PP (quop);						/* high remainder */
M[quop] = M[quop] | FLAG;				/* set flag */
return SCPE_OK;
}

/* Divide step

   Inputs:
	dvd	=	current dividend address (high digit)
	dvr	=	divisor address (low digit)
	max	=	max number of iterations before overflow
	&quod	=	address to store quotient digit
	&quop	=	address to store quotient pointer (can be NULL)
   Outputs:
	return	=	status

   Divide step calculates a quotient digit by repeatedly subtracting the
   divisor from the current dividend.  The divisor's length controls the
   subtraction; dividend flags are ignored.
*/

t_stat div_one_digit (uint32 dvd, uint32 dvr, uint32 max,
		     uint32 *quod, uint32 *quop)
{
uint32 dvrp, dvrd, dvrf;				/* dvr ptr, dig, flag */
uint32 dvdp, dvdd;					/* dvd ptr, dig */
uint32 qd, cry;						/* quo dig, carry */
t_addr cnt;

for (qd = 0; qd < max; qd++) {				/* devel quo dig */
	dvrp = dvr;					/* divisor ptr */
	dvdp = dvd;					/* dividend ptr */
	cnt = 0;
	cry = 1;					/* carry in = 1 */
	do {						/* sub dvr fm dvd */
	    dvdd = M[dvdp] & DIGIT;			/* dividend digit */
	    if (BAD_DIGIT (dvdd)) return STOP_INVDIG;	/* bad? */
	    dvrd = M[dvrp] & DIGIT;			/* divisor digit */
	    dvrf = M[dvrp] & FLAG;			/* divisor flag */
	    if (BAD_DIGIT (dvrd)) return STOP_INVDIG;	/* bad? */
	    M[dvdp] = add_one_digit (dvdd, 9 - dvrd, &cry);	/* sub */
	    MM (dvdp); MM (dvrp);			/* decr ptrs */
	    if (cnt++ > MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
	while ((dvrf == 0) || (cnt <= 1));		/* until dvr flag */
	if (!cry) {					/* !cry = borrow */
	    dvdd = M[dvdp] & DIGIT;			/* borrow digit */
	    if (BAD_DIGIT (dvdd)) return STOP_INVDIG;	/* bad? */
	    M[dvdp] = add_one_digit (dvdd, 9, &cry);  }	/* sub */
	if (!cry) break;  }				/* !cry = negative */

/* Add back the divisor to correct for the negative result */

dvrp = dvr;						/* divisor ptr */
dvdp = dvd;						/* dividend ptr */
cnt = 0;
cry = 0;						/* carry in = 0 */
do {	dvdd = M[dvdp] & DIGIT;				/* dividend digit */
	dvrd = M[dvrp] & DIGIT;				/* divisor digit */
	dvrf = M[dvrp] & FLAG;				/* divisor flag */
	M[dvdp] = add_one_digit (dvdd, dvrd, &cry);	/* add */
	MM (dvdp); MM (dvrp); cnt++;  }			/* decr ptrs */
while ((dvrf == 0) || (cnt <= 1));			/* until dvr flag */
if (cry) {						/* carry out? */
	dvdd = M[dvdp] & DIGIT;				/* borrow digit */
	M[dvdp] = add_one_digit (dvdd, 0, &cry);  }	/* add */
if (quop != NULL) *quop = dvdp;				/* set quo addr */
*quod = qd;						/* set quo digit */
return SCPE_OK;
}

/* Logical operation routines (and, or, xor, complement)

   Inputs:
	d	=	destination address
	s	=	source address
   Output:
	return	=	status

   Destination flags are preserved; EZ reflects the result.
   COM does not obey normal field length restrictions.
*/

t_stat or_field (uint32 d, uint32 s)
{
t_addr cnt = 0;
int32 t;

ind[IN_EZ] = 1;						/* assume result zero */
do {	t = M[s];					/* get src */
	M[d] = (M[d] & FLAG) | ((M[d] | t) & 07);	/* OR src to dst */
	if (M[d] & DIGIT) ind[IN_EZ] = 0;		/* nz dig? clr ind */
	MM (d); MM (s);					/* decr pointers */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while (((t & FLAG) == 0) || (cnt <= 1));		/* until src flag */
return SCPE_OK;
}

t_stat and_field (uint32 d, uint32 s)
{
t_addr cnt = 0;
int32 t;

ind[IN_EZ] = 1;						/* assume result zero */
do {	t = M[s];					/* get src */
	M[d] = (M[d] & FLAG) | ((M[d] & t) & 07);	/* AND src to dst */
	if (M[d] & DIGIT) ind[IN_EZ] = 0;		/* nz dig? clr ind */
	MM (d); MM (s);					/* decr pointers */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while (((t & FLAG) == 0) || (cnt <= 1));		/* until src flag */
return SCPE_OK;
}

t_stat xor_field (uint32 d, uint32 s)
{
t_addr cnt = 0;
int32 t;

ind[IN_EZ] = 1;						/* assume result zero */
do {	t = M[s];					/* get src */
	M[d] = (M[d] & FLAG) | ((M[d] ^ t) & 07);	/* XOR src to dst */
	if (M[d] & DIGIT) ind[IN_EZ] = 0;		/* nz dig? clr ind */
	MM (d); MM (s);					/* decr pointers */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while (((t & FLAG) == 0) || (cnt <= 1));		/* until src flag */
return SCPE_OK;
}

t_stat com_field (uint32 d, uint32 s)
{
t_addr cnt = 0;
int32 t;

ind[IN_EZ] = 1;						/* assume result zero */
do {	t = M[s];					/* get src */
	M[d] = (t & FLAG) | ((t ^ 07) & 07);		/* comp src to dst */
	if (M[d] & DIGIT) ind[IN_EZ] = 0;		/* nz dig? clr ind */
	MM (d); MM (s);					/* decr pointers */
	if (cnt++ >= MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while ((t & FLAG) == 0);				/* until src flag */
return SCPE_OK;
}

/* Octal to decimal

   Inputs:
	tbl	=	conversion table address (low digit)
	s	=	source address
   Outputs:
	product area =	converted source
	result	=	status

   OTD is a cousin of multiply.  The octal digits in the source are
   multiplied by successive values in the conversion table, and the
   results are accumulated in the product area.  Although the manual
   does not say, this code assumes that EZ and HP are affected.
 */

t_stat oct_to_dec (uint32 tbl, uint32 s)
{
t_addr cnt = 0, tblc;
uint32 i, sd, sf, tf, sign;
t_stat r;

for (i = 0; i < PROD_AREA_LEN; i++)			/* clr prod area */
	M[PROD_AREA + i] = 0;
sign = M[s] & FLAG;					/* save sign */
ind[IN_EZ] = 1;						/* set indicators */
ind[IN_HP] = (sign == 0);
do {	sd = M[s] & DIGIT;				/* src digit */
	sf = M[s] & FLAG;				/* src flag */
	r = mul_one_digit (sd, tbl, PROD_AREA + PROD_AREA_LEN - 1, sf);
	if (r != SCPE_OK) return r;			/* err? */
	MM (s);						/* decr src addr */
	MM (tbl);					/* skip 1st tbl dig */
	tblc = 0;					/* count */
	do {	tf = M[tbl] & FLAG;			/* get next */
		MM (tbl);				/* decr ptr */
		if (tblc++ > MEMSIZE) return STOP_FWRAP;  }
	while (tf == 0);				/* until flag */
	if (cnt++ > MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
while (sf == 0);
if (ind[IN_EZ]) ind[IN_HP] = 0;				/* res = 0? clr HP */
M[PROD_AREA + PROD_AREA_LEN - 1] |= sign;		/* set sign */
return SCPE_OK;
}

/* Decimal to octal 

   Inputs:
	d	=	destination address
	tbl	=	conversion table address (low digit of highest power)
	&ez	=	address of soft EZ indicator
	product area =	field to convert
   Outputs:
	return	=	status

   DTO is a cousin to divide.  The number in the product area is repeatedly
   divided by successive values in the conversion table, and the quotient
   digits are stored in the destination.  Although the manual does not say,
   this code assumes that EZ and HP are affected.
 */

t_stat dec_to_oct (uint32 d, uint32 tbl, int32 *ez)
{
uint32 sign, octd, t;
t_bool first = TRUE;
t_addr ctr = 0;
t_stat r;

sign = M[PROD_AREA + PROD_AREA_LEN - 1] & FLAG;		/* input sign */
*ez = 1;						/* set indicators */
ind[IN_HP] = (sign == 0);
for ( ;; ) {
	r = div_one_digit (PROD_AREA + PROD_AREA_LEN - 1, /* divide */
	    tbl, 8, &octd, NULL);
	if (r != SCPE_OK) return r;			/* error? */
	if (first) {					/* first pass? */
	    if (octd >= 8) {				/* overflow? */
		ind[IN_OVF] = 1;			/* set indicator */
		return SCPE_OK;  }			/* stop */
	    M[d] = FLAG | octd;				/* set flag on quo */
	    first = FALSE;  }
	else M[d] = octd;				/* store quo digit */
	if (octd) *ez = 0;				/* if nz, clr ind */
	PP (tbl);					/* incr tbl addr */
	if ((M[tbl] & REC_MARK) == REC_MARK) break;	/* record mark? */
	PP (tbl);					/* skip flag */
	if ((M[tbl] & REC_MARK) == REC_MARK) break;	/* record mark? */
	do {	PP (tbl);				/* look for F, rec mk */
		t = M[tbl];  }
	while (((t & FLAG) == 0) && ((t & REC_MARK) != REC_MARK));
	MM (tbl);					/* step back one */
	PP (d);						/* incr quo addr */
	if (ctr++ > MEMSIZE) return STOP_FWRAP;  }	/* (stop runaway) */
if (*ez) ind[IN_HP] = 0;				/* res = 0? clr HP */
M[d] = M[d] | sign;					/* set result sign */	
return SCPE_OK;
}

/* Reset routine */

t_stat cpu_reset (DEVICE *dptr)
{
int32 i;
static t_bool one_time = TRUE;

PR1 = IR2 = 1;						/* invalidate PR1,IR2 */
ind[0] = 0;
for (i = IN_SW4 + 1; i < NUM_IND; i++) ind[i] = 0;	/* init indicators */
if (cpu_unit.flags & IF_IA) iae = 1;			/* indirect enabled? */
else iae = 0;
idxe = idxb = 0;					/* indexing off */
pcq_r = find_reg ("PCQ", NULL, dptr);			/* init old PC queue */
if (pcq_r) pcq_r->qptr = 0;
else return SCPE_IERR;
sim_brk_types = sim_brk_dflt = SWMASK ('E');		/* init breakpoints */
upd_ind ();						/* update indicators */
if (one_time) cpu_set_table (&cpu_unit, 1, NULL, NULL);	/* set default tables */
one_time = FALSE;
return SCPE_OK;
}

/* Memory examine */

t_stat cpu_ex (t_value *vptr, t_addr addr, UNIT *uptr, int32 sw)
{
if (addr >= MEMSIZE) return SCPE_NXM;
if (vptr != NULL) *vptr = M[addr] & (FLAG | DIGIT);
return SCPE_OK;
}

/* Memory deposit */

t_stat cpu_dep (t_value val, t_addr addr, UNIT *uptr, int32 sw)
{
if (addr >= MEMSIZE) return SCPE_NXM;
M[addr] = val & (FLAG | DIGIT);
return SCPE_OK;
}

/* Memory size change */

t_stat cpu_set_size (UNIT *uptr, int32 val, char *cptr, void *desc)
{
int32 mc = 0;
t_addr i;

if ((val <= 0) || (val > MAXMEMSIZE) || ((val % 1000) != 0))
	return SCPE_ARG;
for (i = val; i < MEMSIZE; i++) mc = mc | M[i];
if ((mc != 0) && (!get_yn ("Really truncate memory [N]?", FALSE)))
	return SCPE_OK;
MEMSIZE = val;
for (i = MEMSIZE; i < MAXMEMSIZE; i++) M[i] = 0;
return SCPE_OK;
}

/* Model change */

t_stat cpu_set_model (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (val) cpu_unit.flags = (cpu_unit.flags & (UNIT_SCP | UNIT_BCD | MII_OPT)) |
	IF_DIV | IF_IA | IF_EDT;
else cpu_unit.flags = cpu_unit.flags & (UNIT_SCP | UNIT_BCD | MI_OPT);
return SCPE_OK;
}

/* Set/clear Model 1 option */

t_stat cpu_set_opt1 (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (cpu_unit.flags & IF_MII) {
	printf ("Feature is standard on 1620 Model 2\n");
	if (sim_log) fprintf (sim_log, "Feature is standard on 1620 Model 2\n");
	return SCPE_NOFNC;  }
return SCPE_OK;
}

/* Set/clear Model 2 option */

t_stat cpu_set_opt2 (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (!(cpu_unit.flags & IF_MII)) {
	printf ("Feature is not available on 1620 Model 1\n");
	if (sim_log) fprintf (sim_log, "Feature is not available on 1620 Model 1\n");
	return SCPE_NOFNC;  }
return SCPE_OK;
}

/* Front panel save */

t_stat cpu_set_save (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (saved_PC & 1) return SCPE_NOFNC;
PR1 = saved_PC;
return SCPE_OK;
}

/* Set standard add/multiply tables */

t_stat cpu_set_table (UNIT *uptr, int32 val, char *cptr, void *desc)
{
int32 i;

for (i = 0; i < MUL_TABLE_LEN; i++)			/* set mul table */
	M[MUL_TABLE + i] = std_mul_table[i];
if (((cpu_unit.flags & IF_MII) == 0) || val) {		/* set add table */
	for (i = 0; i < ADD_TABLE_LEN; i++)
		M[ADD_TABLE + i] = std_add_table[i];  }
return SCPE_OK;
}