simh-testsetgenerator/PDP18B/pdp18b_stddev.c
Bob Supnik 2c2dd5ea33 Notes For V2.10-0
WARNING: V2.10 has reorganized and renamed some of the definition
files for the PDP-10, PDP-11, and VAX.  Be sure to delete all
previous source files before you unpack the Zip archive, or
unpack it into a new directory structure.

WARNING: V2.10 has a new, more comprehensive save file format.
Restoring save files from previous releases will cause 'invalid
register' errors and loss of CPU option flags, device enable/
disable flags, unit online/offline flags, and unit writelock
flags.

WARNING: If you are using Visual Studio .NET through the IDE,
be sure to turn off the /Wp64 flag in the project settings, or
dozens of spurious errors will be generated.

WARNING: Compiling Ethernet support under Windows requires
extra steps; see the Ethernet readme file.  Ethernet support is
currently available only for Windows, Linux, NetBSD, and OpenBSD.

1. New Features

1.1 SCP and Libraries

- The VT emulation package has been replaced by the capability
  to remote the console to a Telnet session.  Telnet clients
  typically have more complete and robust VT100 emulation.
- Simulated devices may now have statically allocated buffers,
  in addition to dynamically allocated buffers or disk-based
  data stores.
- The DO command now takes substitutable arguments (max 9).
  In command files, %n represents substitutable argument n.
- The initial command line is now interpreted as the command
  name and substitutable arguments for a DO command.  This is
  backward compatible to prior versions.
- The initial command line parses switches.  -Q is interpreted
  as quiet mode; informational messages are suppressed.
- The HELP command now takes an optional argument.  HELP <cmd>
  types help on the specified command.
- Hooks have been added for implementing GUI-based consoles,
  as well as simulator-specific command extensions.  A few
  internal data structures and definitions have changed.
- Two new routines (tmxr_open_master, tmxr_close_master) have
  been added to sim_tmxr.c.  The calling sequence for
  sim_accept_conn has been changed in sim_sock.c.
- The calling sequence for the VM boot routine has been modified
  to add an additional parameter.
- SAVE now saves, and GET now restores, controller and unit flags.
- Library sim_ether.c has been added for Ethernet support.

1.2 VAX

- Non-volatile RAM (NVR) can behave either like a memory or like
  a disk-based peripheral.  If unattached, it behaves like memory
  and is saved and restored by SAVE and RESTORE, respectively.
  If attached, its contents are loaded from disk by ATTACH and
  written back to disk at DETACH and EXIT.
- SHOW <device> VECTOR displays the device's interrupt vector.
  A few devices allow the vector to be changed with SET
  <device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape) has been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from vax_stddev.c and
  now references a common implementation file, dec_pt.h.
- Examine and deposit switches now work on all devices, not just
  the CPU.
- Device address conflicts are not detected until simulation starts.

1.3 PDP-11

- SHOW <device> VECTOR displays the device's interrupt vector.
  Most devices allow the vector to be changed with SET
  <device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape), RK611/RK06/RK07 (cartridge disk),
  RX211 (double density floppy), and KW11P programmable clock
  have been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from pdp11_stddev.c and
  now references a common implementation file, dec_pt.h.
- Device bootstraps now use the actual CSR specified by the
  SET ADDRESS command, rather than just the default CSR.  Note
  that PDP-11 operating systems may NOT support booting with
  non-standard addresses.
- Specifying more than 256KB of memory, or changing the bus
  configuration, causes all peripherals that are not compatible
  with the current bus configuration to be disabled.
- Device address conflicts are not detected until simulation starts.

1.4 PDP-10

- SHOW <device> VECTOR displays the device's interrupt vector.
  A few devices allow the vector to be changed with SET
  <device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The RX211 (double density floppy) has been added; it is off
  by default.
- The paper tape now references a common implementation file,
  dec_pt.h.
- Device address conflicts are not detected until simulation starts.

1.5 PDP-1

- DECtape (then known as MicroTape) support has been added.
- The line printer and DECtape can be disabled and enabled.

1.6 PDP-8

- The RX28 (double density floppy) has been added as an option to
  the existing RX8E controller.
- SHOW <device> DEVNO displays the device's device number.  Most
  devices allow the device number to be changed with SET <device>
  DEVNO=nnn.
- Device number conflicts are not detected until simulation starts.

1.7 IBM 1620

- The IBM 1620 simulator has been released.

1.8 AltairZ80

- A hard drive has been added for increased storage.
- Several bugs have been fixed.

1.9 HP 2100

- The 12845A has been added and made the default line printer (LPT).
  The 12653A has been renamed LPS and is off by default.  It also
  supports the diagnostic functions needed to run the DCPC and DMS
  diagnostics.
- The 12557A/13210A disk defaults to the 13210A (7900/7901).
- The 12559A magtape is off by default.
- New CPU options (EAU/NOEAU) enable/disable the extended arithmetic
  instructions for the 2116.  These instructions are standard on
  the 2100 and 21MX.
- New CPU options (MPR/NOMPR) enable/disable memory protect for the
  2100 and 21MX.
- New CPU options (DMS/NODMS) enable/disable the dynamic mapping
  instructions for the 21MX.
- The 12539 timebase generator autocalibrates.

1.10 Simulated Magtapes

- Simulated magtapes recognize end of file and the marker
  0xFFFFFFFF as end of medium.  Only the TMSCP tape simulator
  can generate an end of medium marker.
- The error handling in simulated magtapes was overhauled to be
  consistent through all simulators.

1.11 Simulated DECtapes

- Added support for RT11 image file format (256 x 16b) to DECtapes.

2. Release Notes

2.1 Bugs Fixed

- TS11/TSV05 was not simulating the XS0_MOT bit, causing failures
  under VMS.  In addition, two of the CTL options were coded
  interchanged.
- IBM 1401 tape was not setting a word mark under group mark for
  load mode reads.  This caused the diagnostics to crash.
- SCP bugs in ssh_break and set_logon were fixed (found by Dave
  Hittner).
- Numerous bugs in the HP 2100 extended arithmetic, floating point,
  21MX, DMS, and IOP instructions were fixed.  Bugs were also fixed
  in the memory protect and DMS functions.  The moving head disks
  (DP, DQ) were revised to simulate the hardware more accurately.
  Missing functions in DQ (address skip, read address) were added.

2.2 HP 2100 Debugging

- The HP 2100 CPU nows runs all of the CPU diagnostics.
- The peripherals run most of the peripheral diagnostics.  There
  is still a problem in overlapped seek operation on the disks.
  See the file hp2100_diag.txt for details.

3. In Progress

These simulators are not finished and are available in a separate
Zip archive distribution.

- Interdata 16b/32b: coded, partially tested.  See the file
  id_diag.txt for details.
- SDS 940: coded, partially tested.
2011-04-15 08:33:49 -07:00

883 lines
25 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* pdp18b_stddev.c: 18b PDP's standard devices
Copyright (c) 1993-2002, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
ptr paper tape reader
ptp paper tape punch
tti keyboard
tto teleprinter
clk clock
01-Nov-02 RMS Added 7B/8B support to terminal
05-Oct-02 RMS Added DIBs, device number support, IORS call
14-Jul-02 RMS Added ASCII reader/punch support (from Hans Pufal)
30-May-02 RMS Widened POS to 32b
29-Nov-01 RMS Added read only unit support
25-Nov-01 RMS Revised interrupt structure
17-Sep-01 RMS Removed multiconsole support
07-Sep-01 RMS Added terminal multiplexor support
17-Jul-01 RMS Moved function prototype
10-Jun-01 RMS Cleaned up IOT decoding to reflect hardware
27-May-01 RMS Added multiconsole support
10-Mar-01 RMS Added funny format loader support
05-Mar-01 RMS Added clock calibration support
22-Dec-00 RMS Added PDP-9/15 half duplex support
30-Nov-00 RMS Fixed PDP-4/7 bootstrap loader for 4K systems
30-Oct-00 RMS Standardized register naming
06-Jan-97 RMS Fixed PDP-4 console input
16-Dec-96 RMS Fixed bug in binary ptr service
*/
#include "pdp18b_defs.h"
#include <ctype.h>
#define UNIT_V_RASCII (UNIT_V_UF + 0) /* reader ASCII */
#define UNIT_RASCII (1 << UNIT_V_RASCII)
#define UNIT_V_PASCII (UNIT_V_UF + 0) /* punch ASCII */
#define UNIT_PASCII (1 << UNIT_V_PASCII)
extern int32 M[];
extern int32 int_hwre[API_HLVL+1], saved_PC;
extern int32 sim_switches;
extern UNIT cpu_unit;
int32 clk_state = 0;
int32 ptr_err = 0, ptr_stopioe = 0, ptr_state = 0;
int32 ptp_err = 0, ptp_stopioe = 0;
int32 tti_state = 0;
int32 tto_state = 0;
int32 clk_tps = 60; /* ticks/second */
int32 tmxr_poll = 16000; /* term mux poll */
int32 ptr (int32 pulse, int32 AC);
int32 ptp (int32 pulse, int32 AC);
int32 tti (int32 pulse, int32 AC);
int32 tto (int32 pulse, int32 AC);
int32 clk_iors (void);
int32 ptr_iors (void);
int32 ptp_iors (void);
int32 tti_iors (void);
int32 tto_iors (void);
t_stat clk_svc (UNIT *uptr);
t_stat ptr_svc (UNIT *uptr);
t_stat ptp_svc (UNIT *uptr);
t_stat tti_svc (UNIT *uptr);
t_stat tto_svc (UNIT *uptr);
t_stat clk_reset (DEVICE *dptr);
t_stat ptr_reset (DEVICE *dptr);
t_stat ptp_reset (DEVICE *dptr);
t_stat tti_reset (DEVICE *dptr);
t_stat tto_reset (DEVICE *dptr);
t_stat ptr_attach (UNIT *uptr, char *cptr);
t_stat ptp_attach (UNIT *uptr, char *cptr);
t_stat ptr_detach (UNIT *uptr);
t_stat ptp_detach (UNIT *uptr);
t_stat ptr_boot (int32 unitno, DEVICE *dptr);
t_stat tty_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc);
extern int32 upd_iors (void);
/* CLK data structures
clk_dev CLK device descriptor
clk_unit CLK unit
clk_reg CLK register list
*/
DIB clk_dib = { 0, 0, &clk_iors, { NULL } };
UNIT clk_unit = { UDATA (&clk_svc, 0, 0), 16000 };
REG clk_reg[] = {
{ FLDATA (INT, int_hwre[API_CLK], INT_V_CLK) },
{ FLDATA (DONE, int_hwre[API_CLK], INT_V_CLK) },
{ FLDATA (ENABLE, clk_state, 0) },
{ DRDATA (TIME, clk_unit.wait, 24), REG_NZ + PV_LEFT },
{ DRDATA (TPS, clk_tps, 8), REG_NZ + PV_LEFT },
{ NULL } };
MTAB clk_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", NULL, NULL, &show_devno },
{ 0 } };
DEVICE clk_dev = {
"CLK", &clk_unit, clk_reg, clk_mod,
1, 0, 0, 0, 0, 0,
NULL, NULL, &clk_reset,
NULL, NULL, NULL,
&clk_dib, 0 };
/* PTR data structures
ptr_dev PTR device descriptor
ptr_unit PTR unit
ptr_reg PTR register list
*/
DIB ptr_dib = { DEV_PTR, 1, &ptr_iors, { &ptr } };
UNIT ptr_unit = {
UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0),
SERIAL_IN_WAIT };
REG ptr_reg[] = {
{ ORDATA (BUF, ptr_unit.buf, 18) },
{ FLDATA (INT, int_hwre[API_PTR], INT_V_PTR) },
{ FLDATA (DONE, int_hwre[API_PTR], INT_V_PTR) },
#if defined (IOS_PTRERR)
{ FLDATA (ERR, ptr_err, 0) },
#endif
{ ORDATA (STATE, ptr_state, 5), REG_HRO },
{ DRDATA (POS, ptr_unit.pos, 32), PV_LEFT },
{ DRDATA (TIME, ptr_unit.wait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, ptr_stopioe, 0) },
{ NULL } };
MTAB ptr_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", NULL, NULL, &show_devno },
{ 0 } };
DEVICE ptr_dev = {
"PTR", &ptr_unit, ptr_reg, ptr_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &ptr_reset,
&ptr_boot, &ptr_attach, &ptr_detach,
&ptr_dib, 0 };
/* PTP data structures
ptp_dev PTP device descriptor
ptp_unit PTP unit
ptp_reg PTP register list
*/
DIB ptp_dib = { DEV_PTP, 1, &ptp_iors, { &ptp } };
UNIT ptp_unit = {
UDATA (&ptp_svc, UNIT_SEQ+UNIT_ATTABLE, 0), SERIAL_OUT_WAIT };
REG ptp_reg[] = {
{ ORDATA (BUF, ptp_unit.buf, 8) },
{ FLDATA (INT, int_hwre[API_PTP], INT_V_PTP) },
{ FLDATA (DONE, int_hwre[API_PTP], INT_V_PTP) },
#if defined (IOS_PTPERR)
{ FLDATA (ERR, ptp_err, 0) },
#endif
{ DRDATA (POS, ptp_unit.pos, 32), PV_LEFT },
{ DRDATA (TIME, ptp_unit.wait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, ptp_stopioe, 0) },
{ NULL } };
MTAB ptp_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", NULL, NULL, &show_devno },
{ 0 } };
DEVICE ptp_dev = {
"PTP", &ptp_unit, ptp_reg, ptp_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &ptp_reset,
NULL, &ptp_attach, &ptp_detach,
&ptp_dib, 0 };
/* TTI data structures
tti_dev TTI device descriptor
tti_unit TTI unit
tti_reg TTI register list
tti_trans ASCII to Baudot table
*/
#if defined (KSR28)
#define TTI_WIDTH 5
#define TTI_FIGURES (1 << TTI_WIDTH)
#define TTI_2ND (1 << (TTI_WIDTH + 1))
#define TTI_BOTH (1 << (TTI_WIDTH + 2))
#define BAUDOT_LETTERS 033
#define BAUDOT_FIGURES 037
static const int32 tti_trans[128] = {
000,000,000,000,000,000,000,064, /* bell */
000,000,0210,000,000,0202,000,000, /* lf, cr */
000,000,000,000,000,000,000,000,
000,000,000,000,000,000,000,000,
0204,066,061,045,062,000,053,072, /* space - ' */
076,051,000,000,046,070,047,067, /* ( - / */
055,075,071,060,052,041,065,074, /* 0 - 7 */
054,043,056,057,000,000,000,063, /* 8 - ? */
000,030,023,016,022,020,026,013, /* @ - G */
005,014,032,036,011,007,006,003, /* H - O */
015,035,012,024,001,034,017,031, /* P - W */
027,025,021,000,000,000,000,000, /* X - _ */
000,030,023,016,022,020,026,013, /* ` - g */
005,014,032,036,011,007,006,003, /* h - o */
015,035,012,024,001,034,017,031, /* p - w */
027,025,021,000,000,000,000,000 }; /* x - DEL */
#else
#define TTI_WIDTH 8
#endif
#define TTI_MASK ((1 << TTI_WIDTH) - 1)
#define UNIT_V_8B (UNIT_V_UF + 0) /* 8B */
#define UNIT_V_KSR (UNIT_V_UF + 1) /* KSR33 */
#define UNIT_V_HDX (UNIT_V_UF + 2) /* half duplex */
#define UNIT_8B (1 << UNIT_V_8B)
#define UNIT_KSR (1 << UNIT_V_KSR)
#define UNIT_HDX (1 << UNIT_V_HDX)
DIB tti_dib = { DEV_TTI, 1, &tti_iors, { &tti } };
#if defined (PDP4) || defined (PDP7)
UNIT tti_unit = { UDATA (&tti_svc, UNIT_KSR, 0), KBD_POLL_WAIT };
#else
UNIT tti_unit = { UDATA (&tti_svc, UNIT_KSR+UNIT_HDX, 0), KBD_POLL_WAIT };
#endif
REG tti_reg[] = {
{ ORDATA (BUF, tti_unit.buf, TTI_WIDTH) },
{ FLDATA (INT, int_hwre[API_TTI], INT_V_TTI) },
{ FLDATA (DONE, int_hwre[API_TTI], INT_V_TTI) },
#if defined (KSR28)
{ ORDATA (TTI_STATE, tti_state, (TTI_WIDTH + 3)), REG_HRO },
#endif
{ DRDATA (POS, tti_unit.pos, 32), PV_LEFT },
{ DRDATA (TIME, tti_unit.wait, 24), REG_NZ + PV_LEFT },
{ NULL } };
MTAB tti_mod[] = {
#if !defined (KSR28)
{ UNIT_KSR+UNIT_8B, UNIT_KSR, "KSR", "KSR", &tty_set_mode },
{ UNIT_KSR+UNIT_8B, 0 , "7b" , "7B" , &tty_set_mode },
{ UNIT_KSR+UNIT_8B, UNIT_8B , "8b" , "8B" , &tty_set_mode },
{ UNIT_HDX, 0 , "full duplex", "FDX", NULL },
{ UNIT_HDX, UNIT_HDX, "half duplex", "HDX", NULL },
#endif
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", NULL, NULL, &show_devno },
{ 0 } };
DEVICE tti_dev = {
"TTI", &tti_unit, tti_reg, tti_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &tti_reset,
NULL, NULL, NULL,
&tti_dib, 0 };
/* TTO data structures
tto_dev TTO device descriptor
tto_unit TTO unit
tto_reg TTO register list
tto_trans Baudot to ASCII table
*/
#if defined (KSR28)
#define TTO_WIDTH 5
#define TTO_FIGURES (1 << TTO_WIDTH)
static const char tto_trans[64] = {
0 ,'T',015,'O',' ','H','N','M',
012,'L','R','G','I','P','C','V',
'E','Z','D','B','S','Y','F','X',
'A','W','J', 0 ,'U','Q','K', 0,
0 ,'5','\r','9',' ','#',',','.',
012,')','4','&','8','0',':',';',
'3','"','$','?','\a','6','!','/',
'-','2','\'',0 ,'7','1','(', 0 };
#else
#define TTO_WIDTH 8
#endif
#define TTO_MASK ((1 << TTO_WIDTH) - 1)
DIB tto_dib = { DEV_TTO, 1, &tto_iors, { &tto } };
UNIT tto_unit = { UDATA (&tto_svc, UNIT_KSR, 0), SERIAL_OUT_WAIT };
REG tto_reg[] = {
{ ORDATA (BUF, tto_unit.buf, TTO_WIDTH) },
{ FLDATA (INT, int_hwre[API_TTO], INT_V_TTO) },
{ FLDATA (DONE, int_hwre[API_TTO], INT_V_TTO) },
#if defined (KSR28)
{ FLDATA (TTO_STATE, tto_state, 0), REG_HRO },
#endif
{ DRDATA (POS, tto_unit.pos, 32), PV_LEFT },
{ DRDATA (TIME, tto_unit.wait, 24), PV_LEFT },
{ NULL } };
MTAB tto_mod[] = {
#if !defined (KSR28)
{ UNIT_KSR+UNIT_8B, UNIT_KSR, "KSR", "KSR", &tty_set_mode },
{ UNIT_KSR+UNIT_8B, 0 , "7b" , "7B" , &tty_set_mode },
{ UNIT_KSR+UNIT_8B, UNIT_8B , "8b" , "8B" , &tty_set_mode },
#endif
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", NULL, NULL, &show_devno },
{ 0 } };
DEVICE tto_dev = {
"TTO", &tto_unit, tto_reg, tto_mod,
1, 10, 31, 1, 8, 8,
NULL, NULL, &tto_reset,
NULL, NULL, NULL,
&tto_dib, 0 };
/* Clock: IOT routine */
int32 clk (int32 pulse, int32 AC)
{
if (pulse & 001) { /* CLSF */
if (TST_INT (CLK)) AC = AC | IOT_SKP; }
if (pulse & 004) { /* CLON/CLOF */
if (pulse & 040) { /* CLON */
CLR_INT (CLK); /* clear flag */
clk_state = 1; /* clock on */
if (!sim_is_active (&clk_unit)) /* already on? */
sim_activate (&clk_unit, /* start, calibr */
sim_rtc_init (clk_unit.wait)); }
else clk_reset (&clk_dev); } /* CLOF */
return AC;
}
/* Unit service */
t_stat clk_svc (UNIT *uptr)
{
int32 t;
if (clk_state) { /* clock on? */
M[7] = (M[7] + 1) & 0777777; /* incr counter */
if (M[7] == 0) SET_INT (CLK); /* ovrflo? set flag */
t = sim_rtc_calb (clk_tps); /* calibrate clock */
sim_activate (&clk_unit, t); /* reactivate unit */
tmxr_poll = t; } /* set mux poll */
return SCPE_OK;
}
/* IORS service */
int32 clk_iors (void)
{
return (TST_INT (CLK)? IOS_CLK: 0);
}
/* Reset routine */
t_stat clk_reset (DEVICE *dptr)
{
CLR_INT (CLK); /* clear flag */
clk_state = 0; /* clock off */
sim_cancel (&clk_unit); /* stop clock */
tmxr_poll = clk_unit.wait; /* set mux poll */
return SCPE_OK;
}
/* Paper tape reader: IOT routine */
int32 ptr (int32 pulse, int32 AC)
{
if (pulse & 001) { /* RSF */
if (TST_INT (PTR)) AC = AC | IOT_SKP; }
if (pulse & 002) { /* RRB, RCF */
CLR_INT (PTR); /* clear done */
AC = AC | ptr_unit.buf; } /* return buffer */
if (pulse & 004) { /* RSA, RSB */
ptr_state = (pulse & 040)? 18: 0; /* set mode */
CLR_INT (PTR); /* clear done */
ptr_unit.buf = 0; /* clear buffer */
sim_activate (&ptr_unit, ptr_unit.wait); }
return AC;
}
/* Unit service */
t_stat ptr_svc (UNIT *uptr)
{
int32 temp;
if ((ptr_unit.flags & UNIT_ATT) == 0) { /* attached? */
#if defined (IOS_PTRERR)
SET_INT (PTR); /* if err, set int */
ptr_err = 1;
#endif
return IORETURN (ptr_stopioe, SCPE_UNATT); }
if ((temp = getc (ptr_unit.fileref)) == EOF) { /* end of file? */
#if defined (IOS_PTRERR)
SET_INT (PTR); /* if err, set done */
ptr_err = 1;
#endif
if (feof (ptr_unit.fileref)) {
if (ptr_stopioe) printf ("PTR end of file\n");
else return SCPE_OK; }
else perror ("PTR I/O error");
clearerr (ptr_unit.fileref);
return SCPE_IOERR; }
if (ptr_state == 0) ptr_unit.buf = (temp | /* alpha */
((ptr_unit.flags & UNIT_RASCII)? 0200: 0)) & 0377;
else if (temp & 0200) { /* binary */
ptr_state = ptr_state - 6;
ptr_unit.buf = ptr_unit.buf | ((temp & 077) << ptr_state); }
if (ptr_state == 0) SET_INT (PTR); /* if done, set flag */
else sim_activate (&ptr_unit, ptr_unit.wait); /* else restart */
ptr_unit.pos = ptr_unit.pos + 1;
return SCPE_OK;
}
/* Reset routine */
t_stat ptr_reset (DEVICE *dptr)
{
ptr_state = 0; /* clear state */
ptr_unit.buf = 0;
CLR_INT (PTR); /* clear flag */
ptr_err = (ptr_unit.flags & UNIT_ATT)? 0: 1;
sim_cancel (&ptr_unit); /* deactivate unit */
return SCPE_OK;
}
/* IORS service */
int32 ptr_iors (void)
{
return ((TST_INT (PTR)? IOS_PTR: 0)
#if defined (IOS_PTRERR)
| (ptr_err? IOS_PTRERR: 0)
#endif
);
}
/* Attach routine */
t_stat ptr_attach (UNIT *uptr, char *cptr)
{
t_stat reason;
reason = attach_unit (uptr, cptr);
ptr_err = (ptr_unit.flags & UNIT_ATT)? 0: 1;
ptr_unit.flags = ptr_unit.flags & ~UNIT_RASCII;
if (sim_switches & SWMASK ('A'))
ptr_unit.flags = ptr_unit.flags | UNIT_RASCII;
return reason;
}
/* Detach routine */
t_stat ptr_detach (UNIT *uptr)
{
ptr_err = 1;
return detach_unit (uptr);
}
#if defined (PDP4) || defined (PDP7)
/* Bootstrap routine, PDP-4 and PDP-7
In a 4K system, the boostrap resides at 7762-7776.
In an 8K or greater system, the bootstrap resides at 17762-17776.
Because the program is so small, simple masking can be
used to remove addr<5> for a 4K system.
*/
#define BOOT_START 017577
#define BOOT_FPC 017577
#define BOOT_RPC 017770
#define BOOT_LEN (sizeof (boot_rom) / sizeof (int))
static const int32 boot_rom[] = {
0700144, /* rsb */
0117762, /* ff, jsb r1b */
0057666, /* dac done 1 */
0117762, /* jms r1b */
0057667, /* dac done 2 */
0117762, /* jms r1b */
0040007, /* dac conend */
0057731, /* dac conbeg */
0440007, /* isz conend */
0117762, /* blk, jms r1b */
0057673, /* dac cai */
0741100, /* spa */
0617665, /* jmp done */
0117762, /* jms r1b */
0057777, /* dac tem1 */
0317673, /* add cai */
0057775, /* dac cks */
0117713, /* jms r1a */
0140010, /* dzm word */
0457777, /* cont, isz tem1 */
0617632, /* jmp cont1 */
0217775, /* lac cks */
0740001, /* cma */
0740200, /* sza */
0740040, /* hlt */
0700144, /* rsb */
0617610, /* jmp blk */
0117713, /* cont1, jms r1a */
0057762, /* dac tem2 */
0117713, /* jms r1a */
0742010, /* rtl */
0742010, /* rtl */
0742010, /* rtl */
0742010, /* rtl */
0317762, /* add tem2 */
0057762, /* dac tem2 */
0117713, /* jms r1a */
0742020, /* rtr */
0317726, /* add cdsp */
0057713, /* dac r1a */
0517701, /* and ccma */
0740020, /* rar */
0317762, /* add tem2 */
0437713, /* xct i r1a */
0617622, /* jmp cont */
0617672, /* dsptch, jmp code0 */
0617670, /* jmp code1 */
0617700, /* jmp code2 */
0617706, /* jmp code3 */
0417711, /* xct code4 */
0617732, /* jmp const */
0740000, /* nop */
0740000, /* nop */
0740000, /* nop */
0200007, /* done, lac conend */
0740040, /* xx */
0740040, /* xx */
0517727, /* code1, and imsk */
0337762, /* add i tem2 */
0300010, /* code0, add word */
0740040, /* cai, xx */
0750001, /* clc */
0357673, /* tad cai */
0057673, /* dac cai */
0617621, /* jmp cont-1 */
0711101, /* code2, spa cla */
0740001, /* ccma, cma */
0277762, /* xor i tem2 */
0300010, /* add word */
0040010, /* code2a, dac word */
0617622, /* jmp cont */
0057711, /* code3, dac code4 */
0217673, /* lac cai */
0357701, /* tad ccma */
0740040, /* code4, xx */
0617622, /* jmp cont */
0000000, /* r1a, 0 */
0700101, /* rsf */
0617714, /* jmp .-1 */
0700112, /* rrb */
0700104, /* rsa */
0057730, /* dac tem */
0317775, /* add cks */
0057775, /* dac cks */
0217730, /* lac tem */
0744000, /* cll */
0637713, /* jmp i r1a */
0017654, /* cdsp, dsptch */
0760000, /* imsk, 760000 */
0000000, /* tem, 0 */
0000000, /* conbeg, 0 */
0300010, /* const, add word */
0060007, /* dac i conend */
0217731, /* lac conbeg */
0040010, /* dac index */
0220007, /* lac i conend */
0560010, /* con1, sad i index */
0617752, /* jmp find */
0560010, /* sad i index */
0617752, /* jmp find */
0560010, /* sad i index */
0617752, /* jmp find */
0560010, /* sad i index */
0617752, /* jmp find */
0560010, /* sad i index */
0617752, /* jmp find */
0617737, /* jmp con1 */
0200010, /* find, lac index */
0540007, /* sad conend */
0440007, /* isz conend */
0617704, /* jmp code2a */
0000000,
0000000,
0000000,
0000000,
0000000, /* r1b, 0 */
0700101, /* rsf */
0617763, /* jmp .-1 */
0700112, /* rrb */
0700144, /* rsb */
0637762, /* jmp i r1b */
0700144, /* go, rsb */
0117762, /* g, jms r1b */
0057775, /* dac cks */
0417775, /* xct cks */
0117762, /* jms r1b */
0000000, /* cks, 0 */
0617771 /* jmp g */
};
t_stat ptr_boot (int32 unitno, DEVICE *dptr)
{
int32 i, mask, wd;
extern int32 sim_switches;
if (ptr_dib.dev != DEV_PTR) return STOP_NONSTD; /* non-std addr? */
if (MEMSIZE < 8192) mask = 0767777; /* 4k? */
else mask = 0777777;
for (i = 0; i < BOOT_LEN; i++) {
wd = boot_rom[i];
if ((wd >= 0040000) && (wd < 0640000)) wd = wd & mask;
M[(BOOT_START & mask) + i] = wd; }
saved_PC = ((sim_switches & SWMASK ('F'))? BOOT_FPC: BOOT_RPC) & mask;
return SCPE_OK;
}
#else
/* PDP-9 and PDP-15 have built-in hardware RIM loaders */
t_stat ptr_boot (int32 unitno, DEVICE *dptr)
{
return SCPE_ARG;
}
#endif
/* Paper tape punch: IOT routine */
int32 ptp (int32 pulse, int32 AC)
{
if (pulse & 001) { /* PSF */
if (TST_INT (PTP)) AC = AC | IOT_SKP; }
if (pulse & 002) CLR_INT (PTP); /* PCF */
if (pulse & 004) { /* PSA, PSB, PLS */
CLR_INT (PTP); /* clear flag */
ptp_unit.buf = (pulse & 040)? /* load punch buf */
(AC & 077) | 0200: AC & 0377; /* bin or alpha */
sim_activate (&ptp_unit, ptp_unit.wait); } /* activate unit */
return AC;
}
/* Unit service */
t_stat ptp_svc (UNIT *uptr)
{
SET_INT (PTP); /* set done flag */
if ((ptp_unit.flags & UNIT_ATT) == 0) { /* not attached? */
ptp_err = 1; /* set error */
return IORETURN (ptp_stopioe, SCPE_UNATT); }
if (ptp_unit.flags & UNIT_PASCII) { /* ASCII mode? */
ptp_unit.buf = ptp_unit.buf & 0177; /* force 7b */
if ((ptp_unit.buf == 0) || (ptp_unit.buf == 0177))
return SCPE_OK; } /* skip null, del */
if (putc (ptp_unit.buf, ptp_unit.fileref) == EOF) { /* I/O error? */
ptp_err = 1; /* set error */
perror ("PTP I/O error");
clearerr (ptp_unit.fileref);
return SCPE_IOERR; }
ptp_unit.pos = ptp_unit.pos + 1;
return SCPE_OK;
}
/* IORS service */
int32 ptp_iors (void)
{
return ((TST_INT (PTP)? IOS_PTP: 0)
#if defined (IOS_PTPERR)
| (ptp_err? IOS_PTPERR: 0)
#endif
);
}
/* Reset routine */
t_stat ptp_reset (DEVICE *dptr)
{
ptp_unit.buf = 0;
CLR_INT (PTP); /* clear flag */
ptp_err = (ptp_unit.flags & UNIT_ATT)? 0: 1;
sim_cancel (&ptp_unit); /* deactivate unit */
return SCPE_OK;
}
/* Attach routine */
t_stat ptp_attach (UNIT *uptr, char *cptr)
{
t_stat reason;
reason = attach_unit (uptr, cptr);
ptp_err = (ptp_unit.flags & UNIT_ATT)? 0: 1;
ptp_unit.flags = ptp_unit.flags & ~UNIT_PASCII;
if (sim_switches & SWMASK ('A'))
ptp_unit.flags = ptp_unit.flags | UNIT_PASCII;
return reason;
}
/* Detach routine */
t_stat ptp_detach (UNIT *uptr)
{
ptp_err = 1;
return detach_unit (uptr);
}
/* Terminal input: IOT routine */
int32 tti (int32 pulse, int32 AC)
{
if (pulse & 001) { /* KSF */
if (TST_INT (TTI)) AC = AC | IOT_SKP; }
if (pulse & 002) { /* KRB */
CLR_INT (TTI); /* clear flag */
AC = AC | tti_unit.buf & TTI_MASK; } /* return buffer */
if (pulse & 004) { /* IORS */
AC = AC | upd_iors (); }
return AC;
}
/* Unit service */
t_stat tti_svc (UNIT *uptr)
{
#if defined (KSR28) /* Baudot... */
int32 c;
sim_activate (&tti_unit, tti_unit.wait); /* continue poll */
if (tti_state & TTI_2ND) { /* char waiting? */
tti_unit.buf = tti_state & TTI_MASK; /* return char */
tti_state = tti_state & ~TTI_2ND; } /* not waiting */
else { if ((c = sim_poll_kbd ()) < SCPE_KFLAG) return c;
c = tti_trans[c & 0177]; /* translate char */
if (c == 0) return SCPE_OK; /* untranslatable? */
if (((c & TTI_FIGURES) == (tti_state & TTI_FIGURES)) ||
(c & TTI_BOTH)) tti_unit.buf = c & TTI_MASK;
else { tti_unit.buf = (c & TTI_FIGURES)?
BAUDOT_FIGURES: BAUDOT_LETTERS;
tti_state = c | TTI_2ND; } } /* set 2nd waiting */
#else /* ASCII... */
int32 c, out;
sim_activate (&tti_unit, tti_unit.wait); /* continue poll */
if ((c = sim_poll_kbd ()) < SCPE_KFLAG) return c; /* no char or error? */
out = c & 0177; /* mask echo to 7b */
if (tti_unit.flags & UNIT_KSR) { /* KSR? */
if (islower (out)) out = toupper (out); /* convert to UC */
c = out | 0200; } /* set TTY bit */
else c = c & ((tti_unit.flags & UNIT_8B)? 0377: 0177); /* no, 7b/8b */
if ((tti_unit.flags & UNIT_HDX) && /* half duplex and */
(!(tto_unit.flags & UNIT_KSR) || /* 7b/8b or */
((out >= 007) && (out <= 0137)))) { /* in range? */
sim_putchar (out); /* echo */
tto_unit.pos = tto_unit.pos + 1; }
tti_unit.buf = c; /* got char */
#endif
SET_INT (TTI); /* set flag */
tti_unit.pos = tti_unit.pos + 1;
return SCPE_OK;
}
/* IORS service */
int32 tti_iors (void)
{
return (TST_INT (TTI)? IOS_TTI: 0);
}
/* Reset routine */
t_stat tti_reset (DEVICE *dptr)
{
tti_unit.buf = 0; /* clear buffer */
tti_state = 0; /* clear state */
CLR_INT (TTI); /* clear flag */
sim_activate (&tti_unit, tti_unit.wait); /* activate unit */
return SCPE_OK;
}
/* Terminal output: IOT routine */
int32 tto (int32 pulse, int32 AC)
{
if (pulse & 001) { /* TSF */
if (TST_INT (TTO)) AC = AC | IOT_SKP; }
if (pulse & 002) CLR_INT (TTO); /* clear flag */
if (pulse & 004) { /* load buffer */
sim_activate (&tto_unit, tto_unit.wait); /* activate unit */
tto_unit.buf = AC & TTO_MASK; } /* load buffer */
return AC;
}
/* Unit service */
t_stat tto_svc (UNIT *uptr)
{
int32 c;
t_stat r;
SET_INT (TTO); /* set flag */
#if defined (KSR28) /* Baudot... */
if (tto_unit.buf == BAUDOT_FIGURES) { /* set figures? */
tto_state = TTO_FIGURES;
return SCPE_OK; }
if (tto_unit.buf == BAUDOT_LETTERS) { /* set letters? */
tto_state = 0;
return SCPE_OK; }
c = tto_trans[tto_unit.buf + tto_state]; /* translate */
#else
if (tto_unit.flags & UNIT_KSR) { /* KSR? */
c = tto_unit.buf & 0177;
if (islower (c)) c = toupper (c);
if ((c < 007) || (c > 0137)) return SCPE_OK; }
else c = tto_unit.buf & ((tto_unit.flags & UNIT_8B)? 0377: 0177);
#endif
if ((r = sim_putchar (c)) != SCPE_OK) return r;
tto_unit.pos = tto_unit.pos + 1;
return SCPE_OK;
}
/* IORS service */
int32 tto_iors (void)
{
return (TST_INT (TTO)? IOS_TTO: 0);
}
/* Reset routine */
t_stat tto_reset (DEVICE *dptr)
{
tto_unit.buf = 0; /* clear buffer */
tto_state = 0; /* clear state */
CLR_INT (TTO); /* clear flag */
sim_cancel (&tto_unit); /* deactivate unit */
return SCPE_OK;
}
t_stat tty_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc)
{
tti_unit.flags = (tti_unit.flags & ~(UNIT_KSR | UNIT_8B)) | val;
tto_unit.flags = (tto_unit.flags & ~(UNIT_KSR | UNIT_8B)) | val;
return SCPE_OK;
}