simh-testsetgenerator/PDP11/pdp11_pt.c
Bob Supnik 4ffd3be790 Notes For V3.0-0
Because some key files have changed, V3.0 should be unzipped to a
clean directory.

1. New Features in 3.0-0

1.1 SCP and Libraries

- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support

1.2 All magtapes

- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
  the -F switch.

1.3 VAX

- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
  files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).

2. Bugs Fixed in 3.01-0

2.1 VAX

- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
  o First and second operands reversed
  o Separated fraction received wrong exponent
  o Overflow calculation on separated integer incorrect
  o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
  fast host processors (fixes from Mark Pizzolato).

2.2 1401

- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.

2.3 Nova

- Fixed DSK variable size interaction with restore.

2.4 PDP-1

- Fixed DT variable size interaction with restore.

2.5 PDP-11

- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
  o Corrected XQ interrupts on IE state transition (code by Tom Evans).
  o Added XQ interrupt clear on soft reset.
  o Removed XQ interrupt when setting XL or RL (multiple people).
  o Added SET/SHOW XQ STATS.
  o Added SHOW XQ FILTERS.
  o Added ability to split received packet into multiple buffers.
  o Added explicit runt and giant packet processing.

2.6 PDP-18B

- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.

2.7 PDP-8

- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.

2.8 HP2100

- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.

2.9 GRI

- Fixed bug in SC queue pointer management.

3. New Features in 3.0 vs prior releases

N/A

4. Bugs Fixed in 3.0 vs prior releases

N/A

5. General Notes

WARNING: The RESTORE command has changed.  RESTORE will now
detach an attached file on a unit, if that unit did not have
an attached file in the saved configuration.  This is required
to assure that the unit flags and the file state are consistent.

WARNING: The compilation scheme for the PDP-10, PDP-11, and VAX
has changed.  Use one of the supplied build files, or read the
documentation carefully, before compiling any of these simulators.
2011-04-15 08:34:08 -07:00

324 lines
9.7 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* pdp11_pt.c: PC11 paper tape reader/punch simulator
Copyright (c) 1993-2003, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
ptr paper tape reader
ptp paper tape punch
19-May-03 RMS Revised for new conditional compilation scheme
25-Apr-03 RMS Revised for extended file support
12-Sep-02 RMS Split off from pdp11_stddev.c
*/
#if defined (VM_PDP10) /* PDP10 version */
#include "pdp10_defs.h"
#define PT_DIS DEV_DIS
extern int32 int_req;
extern int32 int_vec[32];
#elif defined (VM_VAX) /* VAX version */
#include "vax_defs.h"
#define PT_DIS DEV_DIS
extern int32 int_req[IPL_HLVL];
extern int32 int_vec[IPL_HLVL][32];
#else /* PDP-11 version */
#include "pdp11_defs.h"
#define PT_DIS 0
extern int32 int_req[IPL_HLVL];
extern int32 int_vec[IPL_HLVL][32];
#endif
#define PTRCSR_IMP (CSR_ERR+CSR_BUSY+CSR_DONE+CSR_IE) /* paper tape reader */
#define PTRCSR_RW (CSR_IE)
#define PTPCSR_IMP (CSR_ERR + CSR_DONE + CSR_IE) /* paper tape punch */
#define PTPCSR_RW (CSR_IE)
int32 ptr_csr = 0; /* control/status */
int32 ptr_stopioe = 0; /* stop on error */
int32 ptp_csr = 0; /* control/status */
int32 ptp_stopioe = 0; /* stop on error */
DEVICE ptr_dev, ptp_dev;
t_stat ptr_rd (int32 *data, int32 PA, int32 access);
t_stat ptr_wr (int32 data, int32 PA, int32 access);
t_stat ptr_svc (UNIT *uptr);
t_stat ptr_reset (DEVICE *dptr);
t_stat ptr_attach (UNIT *uptr, char *ptr);
t_stat ptr_detach (UNIT *uptr);
t_stat ptp_rd (int32 *data, int32 PA, int32 access);
t_stat ptp_wr (int32 data, int32 PA, int32 access);
t_stat ptp_svc (UNIT *uptr);
t_stat ptp_reset (DEVICE *dptr);
t_stat ptp_attach (UNIT *uptr, char *ptr);
t_stat ptp_detach (UNIT *uptr);
/* PTR data structures
ptr_dev PTR device descriptor
ptr_unit PTR unit descriptor
ptr_reg PTR register list
*/
DIB ptr_dib = { IOBA_PTR, IOLN_PTR, &ptr_rd, &ptr_wr,
1, IVCL (PTR), VEC_PTR, { NULL } };
UNIT ptr_unit = {
UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0),
SERIAL_IN_WAIT };
REG ptr_reg[] = {
{ GRDATA (BUF, ptr_unit.buf, DEV_RDX, 8, 0) },
{ GRDATA (CSR, ptr_csr, DEV_RDX, 16, 0) },
{ FLDATA (INT, int_req, INT_V_PTR) },
{ FLDATA (ERR, ptr_csr, CSR_V_ERR) },
{ FLDATA (BUSY, ptr_csr, CSR_V_BUSY) },
{ FLDATA (DONE, ptr_csr, CSR_V_DONE) },
{ FLDATA (IE, ptr_csr, CSR_V_IE) },
{ DRDATA (POS, ptr_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, ptr_unit.wait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, ptr_stopioe, 0) },
{ FLDATA (DEVDIS, ptr_dev.flags, DEV_V_DIS), REG_HRO },
{ NULL } };
MTAB ptr_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL,
NULL, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL,
NULL, &show_vec, NULL },
{ 0 } };
DEVICE ptr_dev = {
"PTR", &ptr_unit, ptr_reg, ptr_mod,
1, 10, 31, 1, DEV_RDX, 8,
NULL, NULL, &ptr_reset,
NULL, &ptr_attach, &ptr_detach,
&ptr_dib, DEV_DISABLE | PT_DIS | DEV_UBUS | DEV_QBUS };
/* PTP data structures
ptp_dev PTP device descriptor
ptp_unit PTP unit descriptor
ptp_reg PTP register list
*/
DIB ptp_dib = { IOBA_PTP, IOLN_PTP, &ptp_rd, &ptp_wr,
1, IVCL (PTP), VEC_PTP, { NULL } };
UNIT ptp_unit = {
UDATA (&ptp_svc, UNIT_SEQ+UNIT_ATTABLE, 0), SERIAL_OUT_WAIT };
REG ptp_reg[] = {
{ GRDATA (BUF, ptp_unit.buf, DEV_RDX, 8, 0) },
{ GRDATA (CSR, ptp_csr, DEV_RDX, 16, 0) },
{ FLDATA (INT, int_req, INT_V_PTP) },
{ FLDATA (ERR, ptp_csr, CSR_V_ERR) },
{ FLDATA (DONE, ptp_csr, CSR_V_DONE) },
{ FLDATA (IE, ptp_csr, CSR_V_IE) },
{ DRDATA (POS, ptp_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, ptp_unit.wait, 24), PV_LEFT },
{ FLDATA (STOP_IOE, ptp_stopioe, 0) },
{ NULL } };
MTAB ptp_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL,
NULL, &show_addr, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL,
NULL, &show_vec, NULL },
{ 0 } };
DEVICE ptp_dev = {
"PTP", &ptp_unit, ptp_reg, ptp_mod,
1, 10, 31, 1, DEV_RDX, 8,
NULL, NULL, &ptp_reset,
NULL, &ptp_attach, &ptp_detach,
&ptp_dib, DEV_DISABLE | PT_DIS | DEV_UBUS | DEV_QBUS };
/* Paper tape reader I/O address routines */
t_stat ptr_rd (int32 *data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptr csr */
*data = ptr_csr & PTRCSR_IMP;
return SCPE_OK;
case 1: /* ptr buf */
ptr_csr = ptr_csr & ~CSR_DONE;
CLR_INT (PTR);
*data = ptr_unit.buf & 0377;
return SCPE_OK; }
return SCPE_NXM; /* can't get here */
}
t_stat ptr_wr (int32 data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptr csr */
if (PA & 1) return SCPE_OK;
if ((data & CSR_IE) == 0) CLR_INT (PTR);
else if (((ptr_csr & CSR_IE) == 0) && (ptr_csr & (CSR_ERR | CSR_DONE)))
SET_INT (PTR);
if (data & CSR_GO) {
ptr_csr = (ptr_csr & ~CSR_DONE) | CSR_BUSY;
CLR_INT (PTR);
if (ptr_unit.flags & UNIT_ATT) /* data to read? */
sim_activate (&ptr_unit, ptr_unit.wait);
else sim_activate (&ptr_unit, 0); } /* error if not */
ptr_csr = (ptr_csr & ~PTRCSR_RW) | (data & PTRCSR_RW);
return SCPE_OK;
case 1: /* ptr buf */
return SCPE_OK; } /* end switch PA */
return SCPE_NXM; /* can't get here */
}
/* Paper tape reader service */
t_stat ptr_svc (UNIT *uptr)
{
int32 temp;
ptr_csr = (ptr_csr | CSR_ERR) & ~CSR_BUSY;
if (ptr_csr & CSR_IE) SET_INT (PTR);
if ((ptr_unit.flags & UNIT_ATT) == 0)
return IORETURN (ptr_stopioe, SCPE_UNATT);
if ((temp = getc (ptr_unit.fileref)) == EOF) {
if (feof (ptr_unit.fileref)) {
if (ptr_stopioe) printf ("PTR end of file\n");
else return SCPE_OK; }
else perror ("PTR I/O error");
clearerr (ptr_unit.fileref);
return SCPE_IOERR; }
ptr_csr = (ptr_csr | CSR_DONE) & ~CSR_ERR;
ptr_unit.buf = temp & 0377;
ptr_unit.pos = ptr_unit.pos + 1;
return SCPE_OK;
}
/* Paper tape reader support routines */
t_stat ptr_reset (DEVICE *dptr)
{
ptr_unit.buf = 0;
ptr_csr = 0;
if ((ptr_unit.flags & UNIT_ATT) == 0) ptr_csr = ptr_csr | CSR_ERR;
CLR_INT (PTR);
sim_cancel (&ptr_unit);
return SCPE_OK;
}
t_stat ptr_attach (UNIT *uptr, char *cptr)
{
t_stat reason;
reason = attach_unit (uptr, cptr);
if ((ptr_unit.flags & UNIT_ATT) == 0) ptr_csr = ptr_csr | CSR_ERR;
else ptr_csr = ptr_csr & ~CSR_ERR;
return reason;
}
t_stat ptr_detach (UNIT *uptr)
{
ptr_csr = ptr_csr | CSR_ERR;
return detach_unit (uptr);
}
/* Paper tape punch I/O address routines */
t_stat ptp_rd (int32 *data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptp csr */
*data = ptp_csr & PTPCSR_IMP;
return SCPE_OK;
case 1: /* ptp buf */
*data = ptp_unit.buf;
return SCPE_OK; }
return SCPE_NXM; /* can't get here */
}
t_stat ptp_wr (int32 data, int32 PA, int32 access)
{
switch ((PA >> 1) & 01) { /* decode PA<1> */
case 0: /* ptp csr */
if (PA & 1) return SCPE_OK;
if ((data & CSR_IE) == 0) CLR_INT (PTP);
else if (((ptp_csr & CSR_IE) == 0) && (ptp_csr & (CSR_ERR | CSR_DONE)))
SET_INT (PTP);
ptp_csr = (ptp_csr & ~PTPCSR_RW) | (data & PTPCSR_RW);
return SCPE_OK;
case 1: /* ptp buf */
if ((PA & 1) == 0) ptp_unit.buf = data & 0377;
ptp_csr = ptp_csr & ~CSR_DONE;
CLR_INT (PTP);
if (ptp_unit.flags & UNIT_ATT) /* file to write? */
sim_activate (&ptp_unit, ptp_unit.wait);
else sim_activate (&ptp_unit, 0); /* error if not */
return SCPE_OK; } /* end switch PA */
return SCPE_NXM; /* can't get here */
}
/* Paper tape punch service */
t_stat ptp_svc (UNIT *uptr)
{
ptp_csr = ptp_csr | CSR_ERR | CSR_DONE;
if (ptp_csr & CSR_IE) SET_INT (PTP);
if ((ptp_unit.flags & UNIT_ATT) == 0)
return IORETURN (ptp_stopioe, SCPE_UNATT);
if (putc (ptp_unit.buf, ptp_unit.fileref) == EOF) {
perror ("PTP I/O error");
clearerr (ptp_unit.fileref);
return SCPE_IOERR; }
ptp_csr = ptp_csr & ~CSR_ERR;
ptp_unit.pos = ptp_unit.pos + 1;
return SCPE_OK;
}
/* Paper tape punch support routines */
t_stat ptp_reset (DEVICE *dptr)
{
ptp_unit.buf = 0;
ptp_csr = CSR_DONE;
if ((ptp_unit.flags & UNIT_ATT) == 0) ptp_csr = ptp_csr | CSR_ERR;
CLR_INT (PTP);
sim_cancel (&ptp_unit); /* deactivate unit */
return SCPE_OK;
}
t_stat ptp_attach (UNIT *uptr, char *cptr)
{
t_stat reason;
reason = attach_unit (uptr, cptr);
if ((ptp_unit.flags & UNIT_ATT) == 0) ptp_csr = ptp_csr | CSR_ERR;
else ptp_csr = ptp_csr & ~CSR_ERR;
return reason;
}
t_stat ptp_detach (UNIT *uptr)
{
ptp_csr = ptp_csr | CSR_ERR;
return detach_unit (uptr);
}