Because some key files have changed, V3.0 should be unzipped to a clean directory. 1. New Features in 3.0-0 1.1 SCP and Libraries - Added ASSIGN/DEASSIGN (logical name) commands. - Changed RESTORE to unconditionally detach files. - Added E11 and TPC format support to magtape library. - Fixed bug in SHOW CONNECTIONS. - Added USE_ADDR64 support 1.2 All magtapes - Magtapes support SIMH format, E11 format, and TPC format (read only). - SET <tape_unit> FORMAT=format sets the specified tape unit's format. - SHOW <tape_unit> FORMAT displays the specified tape unit's format. - Tape format can also be set as part of the ATTACH command, using the -F switch. 1.3 VAX - VAX can be compiled without USE_INT64. - If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support files > 2GB. - VAX ROM has speed control (SET ROM DELAY/NODELAY). 2. Bugs Fixed in 3.01-0 2.1 VAX - Fixed CVTfi bug: integer overflow not set if exponent out of range - Fixed EMODx bugs: o First and second operands reversed o Separated fraction received wrong exponent o Overflow calculation on separated integer incorrect o Fraction not set to zero if exponent out of range - Fixed interval timer and ROM access to pass power-up self-test even on very fast host processors (fixes from Mark Pizzolato). 2.2 1401 - Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS. - Fixed MCE bug, BS off by 1 if zero suppress. - Fixed chaining bug, D lost if return to SCP. - Fixed H branch, branch occurs after continue. - Added check for invalid 8 character MCW, LCA. - Fixed magtape load-mode end of record response. 2.3 Nova - Fixed DSK variable size interaction with restore. 2.4 PDP-1 - Fixed DT variable size interaction with restore. 2.5 PDP-11 - Fixed DT variable size interaction with restore. - Fixed bug in MMR1 update (found by Tim Stark). - Added XQ features and fixed bugs: o Corrected XQ interrupts on IE state transition (code by Tom Evans). o Added XQ interrupt clear on soft reset. o Removed XQ interrupt when setting XL or RL (multiple people). o Added SET/SHOW XQ STATS. o Added SHOW XQ FILTERS. o Added ability to split received packet into multiple buffers. o Added explicit runt and giant packet processing. 2.6 PDP-18B - Fixed DT, RF variable size interaction with restore. - Fixed MT bug in MTTR. 2.7 PDP-8 - Fixed DT, DF, RF, RX variable size interaction with restore. - Fixed MT bug in SKTR. 2.8 HP2100 - Fixed bug in DP (13210A controller only), DQ read status. - Fixed bug in DP, DQ seek complete. 2.9 GRI - Fixed bug in SC queue pointer management. 3. New Features in 3.0 vs prior releases N/A 4. Bugs Fixed in 3.0 vs prior releases N/A 5. General Notes WARNING: The RESTORE command has changed. RESTORE will now detach an attached file on a unit, if that unit did not have an attached file in the saved configuration. This is required to assure that the unit flags and the file state are consistent. WARNING: The compilation scheme for the PDP-10, PDP-11, and VAX has changed. Use one of the supplied build files, or read the documentation carefully, before compiling any of these simulators.
399 lines
13 KiB
C
399 lines
13 KiB
C
/* pdp8_rf.c: RF08 fixed head disk simulator
|
||
|
||
Copyright (c) 1993-2003, Robert M Supnik
|
||
|
||
Permission is hereby granted, free of charge, to any person obtaining a
|
||
copy of this software and associated documentation files (the "Software"),
|
||
to deal in the Software without restriction, including without limitation
|
||
the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||
and/or sell copies of the Software, and to permit persons to whom the
|
||
Software is furnished to do so, subject to the following conditions:
|
||
|
||
The above copyright notice and this permission notice shall be included in
|
||
all copies or substantial portions of the Software.
|
||
|
||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
|
||
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||
|
||
Except as contained in this notice, the name of Robert M Supnik shall not
|
||
be used in advertising or otherwise to promote the sale, use or other dealings
|
||
in this Software without prior written authorization from Robert M Supnik.
|
||
|
||
rf RF08 fixed head disk
|
||
|
||
14-Mar-03 RMS Fixed variable platter interaction with save/restore
|
||
03-Mar-03 RMS Fixed autosizing
|
||
02-Feb-03 RMS Added variable platter and autosizing support
|
||
04-Oct-02 RMS Added DIB, device number support
|
||
28-Nov-01 RMS Added RL8A support
|
||
25-Apr-01 RMS Added device enable/disable support
|
||
19-Mar-01 RMS Added disk monitor bootstrap, fixed IOT decoding
|
||
15-Feb-01 RMS Fixed 3 cycle data break sequence
|
||
14-Apr-99 RMS Changed t_addr to unsigned
|
||
30-Mar-98 RMS Fixed bug in RF bootstrap
|
||
|
||
The RF08 is a head-per-track disk. It uses the three cycle data break
|
||
facility. To minimize overhead, the entire RF08 is buffered in memory.
|
||
|
||
Two timing parameters are provided:
|
||
|
||
rf_time Interword timing, must be non-zero
|
||
rf_burst Burst mode, if 0, DMA occurs cycle by cycle; otherwise,
|
||
DMA occurs in a burst
|
||
*/
|
||
|
||
#include "pdp8_defs.h"
|
||
#include <math.h>
|
||
|
||
#define UNIT_V_AUTO (UNIT_V_UF + 0) /* autosize */
|
||
#define UNIT_V_PLAT (UNIT_V_UF + 1) /* #platters - 1 */
|
||
#define UNIT_M_PLAT 03
|
||
#define UNIT_GETP(x) ((((x) >> UNIT_V_PLAT) & UNIT_M_PLAT) + 1)
|
||
#define UNIT_AUTO (1 << UNIT_V_AUTO)
|
||
#define UNIT_PLAT (UNIT_M_PLAT << UNIT_V_PLAT)
|
||
|
||
/* Constants */
|
||
|
||
#define RF_NUMWD 2048 /* words/track */
|
||
#define RF_NUMTR 128 /* tracks/disk */
|
||
#define RF_DKSIZE (RF_NUMTR * RF_NUMWD) /* words/disk */
|
||
#define RF_NUMDK 4 /* disks/controller */
|
||
#define RF_WC 07750 /* word count */
|
||
#define RF_MA 07751 /* mem address */
|
||
#define RF_WMASK (RF_NUMWD - 1) /* word mask */
|
||
|
||
/* Parameters in the unit descriptor */
|
||
|
||
#define FUNC u4 /* function */
|
||
#define RF_READ 2 /* read */
|
||
#define RF_WRITE 4 /* write */
|
||
|
||
/* Status register */
|
||
|
||
#define RFS_PCA 04000 /* photocell status */
|
||
#define RFS_DRE 02000 /* data req enable */
|
||
#define RFS_WLS 01000 /* write lock status */
|
||
#define RFS_EIE 00400 /* error int enable */
|
||
#define RFS_PIE 00200 /* photocell int enb */
|
||
#define RFS_CIE 00100 /* done int enable */
|
||
#define RFS_MEX 00070 /* memory extension */
|
||
#define RFS_DRL 00004 /* data late error */
|
||
#define RFS_NXD 00002 /* non-existent disk */
|
||
#define RFS_PER 00001 /* parity error */
|
||
#define RFS_ERR (RFS_WLS + RFS_DRL + RFS_NXD + RFS_PER)
|
||
#define RFS_V_MEX 3
|
||
|
||
#define GET_MEX(x) (((x) & RFS_MEX) << (12 - RFS_V_MEX))
|
||
#define GET_POS(x) ((int) fmod (sim_gtime() / ((double) (x)), \
|
||
((double) RF_NUMWD)))
|
||
#define UPDATE_PCELL if (GET_POS(rf_time) < 6) rf_sta = rf_sta | RFS_PCA; \
|
||
else rf_sta = rf_sta & ~RFS_PCA
|
||
#define RF_INT_UPDATE if ((rf_done && (rf_sta & RFS_CIE)) || \
|
||
((rf_sta & RFS_ERR) && (rf_sta & RFS_EIE)) || \
|
||
((rf_sta & RFS_PCA) && (rf_sta & RFS_PIE))) \
|
||
int_req = int_req | INT_RF; \
|
||
else int_req = int_req & ~INT_RF
|
||
|
||
extern uint16 M[];
|
||
extern int32 int_req, stop_inst;
|
||
extern UNIT cpu_unit;
|
||
|
||
int32 rf_sta = 0; /* status register */
|
||
int32 rf_da = 0; /* disk address */
|
||
int32 rf_done = 0; /* done flag */
|
||
int32 rf_wlk = 0; /* write lock */
|
||
int32 rf_time = 10; /* inter-word time */
|
||
int32 rf_burst = 1; /* burst mode flag */
|
||
int32 rf_stopioe = 1; /* stop on error */
|
||
|
||
DEVICE rf_dev;
|
||
int32 rf60 (int32 IR, int32 AC);
|
||
int32 rf61 (int32 IR, int32 AC);
|
||
int32 rf62 (int32 IR, int32 AC);
|
||
int32 rf64 (int32 IR, int32 AC);
|
||
t_stat rf_svc (UNIT *uptr);
|
||
t_stat pcell_svc (UNIT *uptr);
|
||
t_stat rf_reset (DEVICE *dptr);
|
||
t_stat rf_boot (int32 unitno, DEVICE *dptr);
|
||
t_stat rf_attach (UNIT *uptr, char *cptr);
|
||
t_stat rf_set_size (UNIT *uptr, int32 val, char *cptr, void *desc);
|
||
|
||
/* RF08 data structures
|
||
|
||
rf_dev RF device descriptor
|
||
rf_unit RF unit descriptor
|
||
pcell_unit photocell timing unit (orphan)
|
||
rf_reg RF register list
|
||
*/
|
||
|
||
DIB rf_dib = { DEV_RF, 5, { &rf60, &rf61, &rf62, NULL, &rf64 } };
|
||
|
||
UNIT rf_unit =
|
||
{ UDATA (&rf_svc, UNIT_FIX+UNIT_ATTABLE+
|
||
UNIT_BUFABLE+UNIT_MUSTBUF, RF_DKSIZE) };
|
||
|
||
UNIT pcell_unit = { UDATA (&pcell_svc, 0, 0) };
|
||
|
||
REG rf_reg[] = {
|
||
{ ORDATA (STA, rf_sta, 12) },
|
||
{ ORDATA (DA, rf_da, 20) },
|
||
{ ORDATA (WC, M[RF_WC], 12) },
|
||
{ ORDATA (MA, M[RF_MA], 12) },
|
||
{ FLDATA (DONE, rf_done, 0) },
|
||
{ FLDATA (INT, int_req, INT_V_RF) },
|
||
{ ORDATA (WLK, rf_wlk, 32) },
|
||
{ DRDATA (TIME, rf_time, 24), REG_NZ + PV_LEFT },
|
||
{ FLDATA (BURST, rf_burst, 0) },
|
||
{ FLDATA (STOP_IOE, rf_stopioe, 0) },
|
||
{ DRDATA (CAPAC, rf_unit.capac, 21), REG_HRO },
|
||
{ ORDATA (DEVNUM, rf_dib.dev, 6), REG_HRO },
|
||
{ NULL } };
|
||
|
||
MTAB rf_mod[] = {
|
||
{ UNIT_PLAT, 0, NULL, "1P", &rf_set_size },
|
||
{ UNIT_PLAT, 1, NULL, "2P", &rf_set_size },
|
||
{ UNIT_PLAT, 2, NULL, "3P", &rf_set_size },
|
||
{ UNIT_PLAT, 3, NULL, "4P", &rf_set_size },
|
||
{ UNIT_AUTO, UNIT_AUTO, "autosize", "AUTOSIZE", NULL },
|
||
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
|
||
&set_dev, &show_dev, NULL },
|
||
{ 0 } };
|
||
|
||
DEVICE rf_dev = {
|
||
"RF", &rf_unit, rf_reg, rf_mod,
|
||
1, 8, 20, 1, 8, 12,
|
||
NULL, NULL, &rf_reset,
|
||
&rf_boot, &rf_attach, NULL,
|
||
&rf_dib, DEV_DISABLE | DEV_DIS };
|
||
|
||
/* IOT routines */
|
||
|
||
int32 rf60 (int32 IR, int32 AC)
|
||
{
|
||
int32 t;
|
||
int32 pulse = IR & 07;
|
||
|
||
UPDATE_PCELL; /* update photocell */
|
||
if (pulse & 1) { /* DCMA */
|
||
rf_da = rf_da & ~07777; /* clear DAR<8:19> */
|
||
rf_done = 0; /* clear done */
|
||
rf_sta = rf_sta & ~RFS_ERR; /* clear errors */
|
||
RF_INT_UPDATE; } /* update int req */
|
||
if (pulse & 6) { /* DMAR, DMAW */
|
||
rf_da = rf_da | AC; /* DAR<8:19> |= AC */
|
||
rf_unit.FUNC = pulse & ~1; /* save function */
|
||
t = (rf_da & RF_WMASK) - GET_POS (rf_time); /* delta to new loc */
|
||
if (t < 0) t = t + RF_NUMWD; /* wrap around? */
|
||
sim_activate (&rf_unit, t * rf_time); /* schedule op */
|
||
AC = 0; } /* clear AC */
|
||
return AC;
|
||
}
|
||
|
||
int32 rf61 (int32 IR, int32 AC)
|
||
{
|
||
int32 pulse = IR & 07;
|
||
|
||
UPDATE_PCELL; /* update photocell */
|
||
switch (pulse) { /* decode IR<9:11> */
|
||
case 1: /* DCIM */
|
||
rf_sta = rf_sta & 07007; /* clear STA<3:8> */
|
||
int_req = int_req & ~INT_RF; /* clear int req */
|
||
sim_cancel (&pcell_unit); /* cancel photocell */
|
||
return AC;
|
||
case 2: /* DSAC */
|
||
return ((rf_da & RF_WMASK) == GET_POS (rf_time))? IOT_SKP: 0;
|
||
case 5: /* DIML */
|
||
rf_sta = (rf_sta & 07007) | (AC & 0770); /* STA<3:8> <- AC */
|
||
if (rf_sta & RFS_PIE) /* photocell int? */
|
||
sim_activate (&pcell_unit, (RF_NUMWD - GET_POS (rf_time)) *
|
||
rf_time);
|
||
else sim_cancel (&pcell_unit);
|
||
RF_INT_UPDATE; /* update int req */
|
||
return 0; /* clear AC */
|
||
case 6: /* DIMA */
|
||
return rf_sta; } /* AC <- STA<0:11> */
|
||
return AC;
|
||
}
|
||
|
||
/* IOT's, continued */
|
||
|
||
int32 rf62 (int32 IR, int32 AC)
|
||
{
|
||
int32 pulse = IR & 07;
|
||
|
||
UPDATE_PCELL; /* update photocell */
|
||
if (pulse & 1) { /* DFSE */
|
||
if (rf_sta & RFS_ERR) AC = AC | IOT_SKP; }
|
||
if (pulse & 2) { /* DFSC */
|
||
if (pulse & 4) AC = AC & ~07777; /* for DMAC */
|
||
else if (rf_done) AC = AC | IOT_SKP; }
|
||
if (pulse & 4) AC = AC | (rf_da & 07777); /* DMAC */
|
||
return AC;
|
||
}
|
||
|
||
int32 rf64 (int32 IR, int32 AC)
|
||
{
|
||
int32 pulse = IR & 07;
|
||
|
||
UPDATE_PCELL; /* update photocell */
|
||
switch (pulse) { /* decode IR<9:11> */
|
||
case 1: /* DCXA */
|
||
rf_da = rf_da & 07777; /* clear DAR<0:7> */
|
||
break;
|
||
case 3: /* DXAL */
|
||
rf_da = rf_da & 07777; /* clear DAR<0:7> */
|
||
case 2: /* DXAL w/o clear */
|
||
rf_da = rf_da | ((AC & 0377) << 12); /* DAR<0:7> |= AC */
|
||
AC = AC & ~07777; /* clear AC */
|
||
break;
|
||
case 5: /* DXAC */
|
||
AC = AC & ~07777; /* clear AC */
|
||
case 4: /* DXAC w/o clear */
|
||
AC = AC | ((rf_da >> 12) & 0377); /* AC |= DAR<0:7> */
|
||
break;
|
||
default:
|
||
AC = (stop_inst << IOT_V_REASON) + AC;
|
||
break; } /* end switch */
|
||
if ((uint32) rf_da >= rf_unit.capac) rf_sta = rf_sta | RFS_NXD;
|
||
else rf_sta = rf_sta & ~RFS_NXD;
|
||
RF_INT_UPDATE;
|
||
return AC;
|
||
}
|
||
|
||
/* Unit service
|
||
|
||
Note that for reads and writes, memory addresses wrap around in the
|
||
current field. This code assumes the entire disk is buffered.
|
||
*/
|
||
|
||
t_stat rf_svc (UNIT *uptr)
|
||
{
|
||
int32 pa, t, mex;
|
||
|
||
UPDATE_PCELL; /* update photocell */
|
||
if ((uptr->flags & UNIT_BUF) == 0) { /* not buf? abort */
|
||
rf_sta = rf_sta | RFS_NXD;
|
||
rf_done = 1;
|
||
RF_INT_UPDATE; /* update int req */
|
||
return IORETURN (rf_stopioe, SCPE_UNATT); }
|
||
|
||
mex = GET_MEX (rf_sta);
|
||
do { if ((uint32) rf_da >= rf_unit.capac) { /* disk overflow? */
|
||
rf_sta = rf_sta | RFS_NXD;
|
||
break; }
|
||
M[RF_WC] = (M[RF_WC] + 1) & 07777; /* incr word count */
|
||
M[RF_MA] = (M[RF_MA] + 1) & 07777; /* incr mem addr */
|
||
pa = mex | M[RF_MA]; /* add extension */
|
||
if (uptr->FUNC == RF_READ) { /* read? */
|
||
if (MEM_ADDR_OK (pa)) /* check nxm */
|
||
M[pa] = *(((int16 *) uptr->filebuf) + rf_da); }
|
||
else { /* write */
|
||
t = ((rf_da >> 15) & 030) | ((rf_da >> 14) & 07);
|
||
if ((rf_wlk >> t) & 1) rf_sta = rf_sta | RFS_WLS;
|
||
else {
|
||
*(((int16 *) uptr->filebuf) + rf_da) = M[pa];
|
||
if (((uint32) rf_da) >= uptr->hwmark) uptr->hwmark = rf_da + 1; } }
|
||
rf_da = (rf_da + 1) & 03777777; } /* incr disk addr */
|
||
while ((M[RF_WC] != 0) && (rf_burst != 0)); /* brk if wc, no brst */
|
||
|
||
if ((M[RF_WC] != 0) && ((rf_sta & RFS_ERR) == 0)) /* more to do? */
|
||
sim_activate (&rf_unit, rf_time); /* sched next */
|
||
else { rf_done = 1; /* done */
|
||
RF_INT_UPDATE; } /* update int req */
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Photocell unit service */
|
||
|
||
t_stat pcell_svc (UNIT *uptr)
|
||
{
|
||
rf_sta = rf_sta | RFS_PCA; /* set photocell */
|
||
if (rf_sta & RFS_PIE) { /* int enable? */
|
||
sim_activate (&pcell_unit, RF_NUMWD * rf_time);
|
||
int_req = int_req | INT_RF; }
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Reset routine */
|
||
|
||
t_stat rf_reset (DEVICE *dptr)
|
||
{
|
||
rf_sta = rf_da = 0;
|
||
rf_done = 1;
|
||
int_req = int_req & ~INT_RF; /* clear interrupt */
|
||
sim_cancel (&rf_unit);
|
||
sim_cancel (&pcell_unit);
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Bootstrap routine */
|
||
|
||
#define OS8_START 07750
|
||
#define OS8_LEN (sizeof (os8_rom) / sizeof (int16))
|
||
#define DM4_START 00200
|
||
#define DM4_LEN (sizeof (dm4_rom) / sizeof (int16))
|
||
|
||
static const uint16 os8_rom[] = {
|
||
07600, /* 7750, CLA CLL ; also word count */
|
||
06603, /* 7751, DMAR ; also address */
|
||
06622, /* 7752, DFSC ; done? */
|
||
05352, /* 7753, JMP .-1 ; no */
|
||
05752 /* 7754, JMP @.-2 ; enter boot */
|
||
};
|
||
|
||
static const uint16 dm4_rom[] = {
|
||
00200, 07600, /* 0200, CLA CLL */
|
||
00201, 06603, /* 0201, DMAR ; read */
|
||
00202, 06622, /* 0202, DFSC ; done? */
|
||
00203, 05202, /* 0203, JMP .-1 ; no */
|
||
00204, 05600, /* 0204, JMP @.-4 ; enter boot */
|
||
07750, 07576, /* 7750, 7576 ; word count */
|
||
07751, 07576 /* 7751, 7576 ; address */
|
||
};
|
||
|
||
t_stat rf_boot (int32 unitno, DEVICE *dptr)
|
||
{
|
||
int32 i;
|
||
extern int32 sim_switches, saved_PC;
|
||
|
||
if (rf_dib.dev != DEV_RF) return STOP_NOTSTD; /* only std devno */
|
||
if (sim_switches & SWMASK ('D')) {
|
||
for (i = 0; i < DM4_LEN; i = i + 2)
|
||
M[dm4_rom[i]] = dm4_rom[i + 1];
|
||
saved_PC = DM4_START; }
|
||
else { for (i = 0; i < OS8_LEN; i++)
|
||
M[OS8_START + i] = os8_rom[i];
|
||
saved_PC = OS8_START; }
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Attach routine */
|
||
|
||
t_stat rf_attach (UNIT *uptr, char *cptr)
|
||
{
|
||
uint32 sz, p;
|
||
uint32 ds_bytes = RF_DKSIZE * sizeof (int16);
|
||
|
||
if ((uptr->flags & UNIT_AUTO) && (sz = sim_fsize (cptr))) {
|
||
p = (sz + ds_bytes - 1) / ds_bytes;
|
||
if (p >= RF_NUMDK) p = RF_NUMDK - 1;
|
||
uptr->flags = (uptr->flags & ~UNIT_PLAT) |
|
||
(p << UNIT_V_PLAT); }
|
||
uptr->capac = UNIT_GETP (uptr->flags) * RF_DKSIZE;
|
||
return attach_unit (uptr, cptr);
|
||
}
|
||
|
||
/* Change disk size */
|
||
|
||
t_stat rf_set_size (UNIT *uptr, int32 val, char *cptr, void *desc)
|
||
{
|
||
if ((val < 0) || (val >= RF_NUMDK)) return SCPE_IERR;
|
||
if (uptr->flags & UNIT_ATT) return SCPE_ALATT;
|
||
uptr->capac = (val + 1) * RF_DKSIZE;
|
||
uptr->flags = uptr->flags & ~UNIT_AUTO;
|
||
return SCPE_OK;
|
||
}
|