simh-testsetgenerator/Interdata/id_tt.c
Bob Supnik a12e4a1c39 Notes For V3.5-1
The source set has been extensively overhauled.  For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.

1. New Features

1.1 3.5-0

1.1.1 All Ethernet devices

- Added Windows user-defined adapter names (from Timothe Litt)

1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors

- Added support for SET <unit>n DISCONNECT

1.1.3 VAX

- Added latent QDSS support
- Revised autoconfigure to handle QDSS

1.1.4 PDP-11

- Revised autoconfigure to handle more cases

1.2 3.5-1

No new features

1.3 3.5-2

1.3.1 All ASCII terminals

- Most ASCII terminal emulators have supported 7-bit and 8-bit
  operation; where required, they have also supported an upper-
  case only or KSR-emulation mode.  This release adds a new mode,
  7P, for 7-bit printing characters.  In 7P mode, non-printing
  characters in the range 0-31 (decimal), and 127 (decimal), are
  automatically suppressed.  This prevents printing of fill
  characters under Windows.

  The printable character set for ASCII code values 0-31 can be
  changed with the SET CONSOLE PCHAR command.  Code value 127
  (DELETE) is always suppressed.

1.3.2 VAX-11/780

- First release.  The VAX-11/780 has successfully run VMS V7.2.  The
  commercial instructions and compatability mode have not been
  extensively tested.  The Ethernet controller is not working yet
  and is disabled.

2. Bugs Fixed

2.1 3.5-0

2.1.1 SCP and libraries

- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators

2.1.2 1401

- Fixed bug, CPU reset was clearing SSB through SSG

2.1.3 PDP-11

- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)

2.1.4 Interdata

- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide

2.1.5 SDS

- Fixed bug in SHOW MUX CONN/STATS

2.1.6 HP

- Fixed bug in SHOW MUX CONN/STATS

2.1.7 PDP-8

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.8 PDP-18b

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.9 Nova, Eclipse

- Fixed potential integer overflow exception in divide

2.2 3.5-1

2.2.1 1401

- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings

2.2.2 1620

- Changed character encodings to be compatible with Pierce 709X simulator

2.2.3 PDP-10

- Changed MOVNI to eliminate GCC warning

2.2.4 VAX

- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table

2.2.5 PDP-11

- Fixed bug in autoconfiguration table

2.3 3.5-2

2.3.1 PDP-10

- RP: fixed drive clear not to clear disk address

2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)

- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)

2.3.3 PDP-8

- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)

2.3.4 VAX

- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected
2011-04-15 08:35:10 -07:00

277 lines
11 KiB
C

/* id_tt.c: Interdata teletype
Copyright (c) 2000-2005, Robert M. Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
tt console
22-Nov-05 RMS Revised for new terminal processing routines
29-Dec-03 RMS Added support for console backpressure
25-Apr-03 RMS Revised for extended file support
11-Jan-03 RMS Added TTP support
22-Dec-02 RMS Added break support
*/
#include "id_defs.h"
#include <ctype.h>
/* Device definitions */
#define TTI 0
#define TTO 1
#define STA_OVR 0x80 /* overrun */
#define STA_BRK 0x20 /* break */
#define STA_MASK (STA_OVR | STA_BRK | STA_BSY) /* status mask */
#define SET_EX (STA_OVR | STA_BRK) /* set EX */
#define CMD_V_FDPX 4 /* full/half duplex */
#define CMD_V_RD 2 /* read/write */
extern uint32 int_req[INTSZ], int_enb[INTSZ];
uint32 tt_sta = STA_BSY; /* status */
uint32 tt_fdpx = 1; /* tt mode */
uint32 tt_rd = 1, tt_chp = 0; /* tt state */
uint32 tt_arm = 0; /* int arm */
uint32 tt (uint32 dev, uint32 op, uint32 dat);
t_stat tti_svc (UNIT *uptr);
t_stat tto_svc (UNIT *uptr);
t_stat tt_reset (DEVICE *dptr);
t_stat tt_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat tt_set_break (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat tt_set_enbdis (UNIT *uptr, int32 val, char *cptr, void *desc);
/* TT data structures
tt_dev TT device descriptor
tt_unit TT unit descriptors
tt_reg TT register list
tt_mod TT modifiers list
*/
DIB tt_dib = { d_TT, -1, v_TT, NULL, &tt, NULL };
UNIT tt_unit[] = {
{ UDATA (&tti_svc, TT_MODE_KSR, 0), KBD_POLL_WAIT },
{ UDATA (&tto_svc, TT_MODE_KSR, 0), SERIAL_OUT_WAIT }
};
REG tt_reg[] = {
{ HRDATA (STA, tt_sta, 8) },
{ HRDATA (KBUF, tt_unit[TTI].buf, 8) },
{ DRDATA (KPOS, tt_unit[TTI].pos, T_ADDR_W), PV_LEFT },
{ DRDATA (KTIME, tt_unit[TTI].wait, 24), REG_NZ + PV_LEFT },
{ HRDATA (TBUF, tt_unit[TTO].buf, 8) },
{ DRDATA (TPOS, tt_unit[TTO].pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TTIME, tt_unit[TTO].wait, 24), REG_NZ + PV_LEFT },
{ FLDATA (IREQ, int_req[l_TT], i_TT) },
{ FLDATA (IENB, int_enb[l_TT], i_TT) },
{ FLDATA (IARM, tt_arm, 0) },
{ FLDATA (RD, tt_rd, 0) },
{ FLDATA (FDPX, tt_fdpx, 0) },
{ FLDATA (CHP, tt_chp, 0) },
{ HRDATA (DEVNO, tt_dib.dno, 8), REG_HRO },
{ NULL }
};
MTAB tt_mod[] = {
{ TT_MODE, TT_MODE_KSR, "KSR", "KSR", &tt_set_mode },
{ TT_MODE, TT_MODE_7B, "7b", "7B", &tt_set_mode },
{ TT_MODE, TT_MODE_8B, "8b", "8B", &tt_set_mode },
{ TT_MODE, TT_MODE_7P, "7p", "7P", &tt_set_mode },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, 0, NULL, "ENABLED",
&tt_set_enbdis, NULL, NULL },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, DEV_DIS, NULL, "DISABLED",
&tt_set_enbdis, NULL, NULL },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, 0, NULL, "BREAK",
&tt_set_break, NULL, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
&set_dev, &show_dev, &tt_dib },
{ 0 }
};
DEVICE tt_dev = {
"TT", tt_unit, tt_reg, tt_mod,
2, 10, 31, 1, 16, 8,
NULL, NULL, &tt_reset,
NULL, NULL, NULL,
&tt_dib, 0
};
/* Terminal: IO routine */
uint32 tt (uint32 dev, uint32 op, uint32 dat)
{
uint32 old_rd, t;
switch (op) { /* case IO op */
case IO_ADR: /* select */
return BY; /* byte only */
case IO_OC: /* command */
old_rd = tt_rd;
tt_arm = int_chg (v_TT, dat, tt_arm); /* upd int ctrl */
tt_fdpx = io_2b (dat, CMD_V_FDPX, tt_fdpx); /* upd full/half */
tt_rd = io_2b (dat, CMD_V_RD, tt_rd); /* upd rd/write */
if (tt_rd != old_rd) { /* rw change? */
if (tt_rd? tt_chp: !sim_is_active (&tt_unit[TTO])) {
tt_sta = 0; /* busy = 0 */
if (tt_arm) SET_INT (v_TT); /* req intr */
}
else {
tt_sta = STA_BSY; /* busy = 1 */
CLR_INT (v_TT); /* clr int */
}
}
else tt_sta = tt_sta & ~STA_OVR; /* clr ovflo */
break;
case IO_RD: /* read */
tt_chp = 0; /* clear pend */
if (tt_rd) tt_sta = (tt_sta | STA_BSY) & ~STA_OVR;
return (tt_unit[TTI].buf & 0xFF);
case IO_WD: /* write */
tt_unit[TTO].buf = dat & 0xFF; /* save char */
if (!tt_rd) tt_sta = tt_sta | STA_BSY; /* set busy */
sim_activate (&tt_unit[TTO], tt_unit[TTO].wait);
break;
case IO_SS: /* status */
t = tt_sta & STA_MASK; /* get status */
if (t & SET_EX) t = t | STA_EX; /* test for EX */
return t;
}
return 0;
}
/* Unit service routines */
t_stat tti_svc (UNIT *uptr)
{
int32 out, temp;
sim_activate (uptr, uptr->wait); /* continue poll */
tt_sta = tt_sta & ~STA_BRK; /* clear break */
if ((temp = sim_poll_kbd ()) < SCPE_KFLAG) return temp; /* no char or error? */
if (tt_rd) { /* read mode? */
tt_sta = tt_sta & ~STA_BSY; /* clear busy */
if (tt_arm) SET_INT (v_TT); /* if armed, intr */
if (tt_chp) tt_sta = tt_sta | STA_OVR; /* got char? overrun */
}
tt_chp = 1; /* char pending */
out = temp & 0x7F; /* echo is 7B */
if (temp & SCPE_BREAK) { /* break? */
tt_sta = tt_sta | STA_BRK; /* set status */
uptr->buf = 0; /* no character */
}
else uptr->buf = sim_tt_inpcvt (temp, TT_GET_MODE (uptr->flags) | TTUF_KSR);
uptr->pos = uptr->pos + 1; /* incr count */
if (!tt_fdpx) { /* half duplex? */
out = sim_tt_outcvt (out, TT_GET_MODE (uptr->flags));
if (out >= 0) { /* valid echo? */
sim_putchar (out); /* write char */
tt_unit[TTO].pos = tt_unit[TTO].pos + 1;
}
}
return SCPE_OK;
}
t_stat tto_svc (UNIT *uptr)
{
int32 ch;
t_stat r;
ch = sim_tt_outcvt (uptr->buf, TT_GET_MODE (uptr->flags));
if (ch >= 0) {
if ((r = sim_putchar_s (ch)) != SCPE_OK) { /* output; error? */
sim_activate (uptr, uptr->wait); /* try again */
return ((r == SCPE_STALL)? SCPE_OK: r);
}
}
if (!tt_rd) { /* write mode? */
tt_sta = tt_sta & ~STA_BSY; /* clear busy */
if (tt_arm) SET_INT (v_TT); /* if armed, intr */
}
uptr->pos = uptr->pos + 1; /* incr count */
return SCPE_OK;
}
/* Reset routine */
t_stat tt_reset (DEVICE *dptr)
{
if (dptr->flags & DEV_DIS) sim_cancel (&tt_unit[TTI]); /* dis? cancel poll */
else sim_activate (&tt_unit[TTI], tt_unit[TTI].wait); /* activate input */
sim_cancel (&tt_unit[TTO]); /* cancel output */
tt_rd = tt_fdpx = 1; /* read, full duplex */
tt_chp = 0; /* no char */
tt_sta = STA_BSY; /* buffer empty */
CLR_INT (v_TT); /* clear int */
CLR_ENB (v_TT); /* disable int */
tt_arm = 0; /* disarm int */
return SCPE_OK;
}
/* Make mode flags uniform */
t_stat tt_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc)
{
tt_unit[TTO].flags = (tt_unit[TTO].flags & ~TT_MODE) | val;
if (val == TT_MODE_7P) val = TT_MODE_7B;
tt_unit[TTI].flags = (tt_unit[TTI].flags & ~TT_MODE) | val;
return SCPE_OK;
}
/* Set input break */
t_stat tt_set_break (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (tt_dev.flags & DEV_DIS) return SCPE_NOFNC;
tt_sta = tt_sta | STA_BRK;
if (tt_rd) { /* read mode? */
tt_sta = tt_sta & ~STA_BSY; /* clear busy */
if (tt_arm) SET_INT (v_TT); /* if armed, intr */
}
sim_cancel (&tt_unit[TTI]); /* restart TT poll */
sim_activate (&tt_unit[TTI], tt_unit[TTI].wait); /* so brk is seen */
return SCPE_OK;
}
/* Set enabled/disabled */
t_stat tt_set_enbdis (UNIT *uptr, int32 val, char *cptr, void *desc)
{
extern DEVICE ttp_dev;
extern t_stat ttp_reset (DEVICE *dptr);
tt_dev.flags = (tt_dev.flags & ~DEV_DIS) | val;
ttp_dev.flags = (ttp_dev.flags & ~DEV_DIS) | (val ^ DEV_DIS);
tt_reset (&tt_dev);
ttp_reset (&ttp_dev);
return SCPE_OK;
}