simh-testsetgenerator/VAX/vax_stddev.c
Bob Supnik a12e4a1c39 Notes For V3.5-1
The source set has been extensively overhauled.  For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.

1. New Features

1.1 3.5-0

1.1.1 All Ethernet devices

- Added Windows user-defined adapter names (from Timothe Litt)

1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors

- Added support for SET <unit>n DISCONNECT

1.1.3 VAX

- Added latent QDSS support
- Revised autoconfigure to handle QDSS

1.1.4 PDP-11

- Revised autoconfigure to handle more cases

1.2 3.5-1

No new features

1.3 3.5-2

1.3.1 All ASCII terminals

- Most ASCII terminal emulators have supported 7-bit and 8-bit
  operation; where required, they have also supported an upper-
  case only or KSR-emulation mode.  This release adds a new mode,
  7P, for 7-bit printing characters.  In 7P mode, non-printing
  characters in the range 0-31 (decimal), and 127 (decimal), are
  automatically suppressed.  This prevents printing of fill
  characters under Windows.

  The printable character set for ASCII code values 0-31 can be
  changed with the SET CONSOLE PCHAR command.  Code value 127
  (DELETE) is always suppressed.

1.3.2 VAX-11/780

- First release.  The VAX-11/780 has successfully run VMS V7.2.  The
  commercial instructions and compatability mode have not been
  extensively tested.  The Ethernet controller is not working yet
  and is disabled.

2. Bugs Fixed

2.1 3.5-0

2.1.1 SCP and libraries

- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators

2.1.2 1401

- Fixed bug, CPU reset was clearing SSB through SSG

2.1.3 PDP-11

- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)

2.1.4 Interdata

- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide

2.1.5 SDS

- Fixed bug in SHOW MUX CONN/STATS

2.1.6 HP

- Fixed bug in SHOW MUX CONN/STATS

2.1.7 PDP-8

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.8 PDP-18b

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.9 Nova, Eclipse

- Fixed potential integer overflow exception in divide

2.2 3.5-1

2.2.1 1401

- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings

2.2.2 1620

- Changed character encodings to be compatible with Pierce 709X simulator

2.2.3 PDP-10

- Changed MOVNI to eliminate GCC warning

2.2.4 VAX

- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table

2.2.5 PDP-11

- Fixed bug in autoconfiguration table

2.3 3.5-2

2.3.1 PDP-10

- RP: fixed drive clear not to clear disk address

2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)

- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)

2.3.3 PDP-8

- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)

2.3.4 VAX

- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected
2011-04-15 08:35:10 -07:00

391 lines
12 KiB
C

/* vax_stddev.c: VAX 3900 standard I/O devices
Copyright (c) 1998-2005, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
tti terminal input
tto terminal output
clk 100Hz and TODR clock
22-Nov-05 RMS Revised for new terminal processing routines
09-Sep-04 RMS Integrated powerup into RESET (with -p)
28-May-04 RMS Removed SET TTI CTRL-C
29-Dec-03 RMS Added console backpressure support
25-Apr-03 RMS Revised for extended file support
02-Mar-02 RMS Added SET TTI CTRL-C
22-Dec-02 RMS Added console halt capability
01-Nov-02 RMS Added 7B/8B capability to terminal
12-Sep-02 RMS Removed paper tape, added variable vector support
30-May-02 RMS Widened POS to 32b
30-Apr-02 RMS Automatically set TODR to VMS-correct value during boot
*/
#include "vax_defs.h"
#include <time.h>
#define TTICSR_IMP (CSR_DONE + CSR_IE) /* terminal input */
#define TTICSR_RW (CSR_IE)
#define TTIBUF_ERR 0x8000 /* error */
#define TTIBUF_OVR 0x4000 /* overrun */
#define TTIBUF_FRM 0x2000 /* framing error */
#define TTIBUF_RBR 0x0400 /* receive break */
#define TTOCSR_IMP (CSR_DONE + CSR_IE) /* terminal output */
#define TTOCSR_RW (CSR_IE)
#define CLKCSR_IMP (CSR_IE) /* real-time clock */
#define CLKCSR_RW (CSR_IE)
#define CLK_DELAY 5000 /* 100 Hz */
#define TMXR_MULT 2 /* 50 Hz */
extern int32 int_req[IPL_HLVL];
extern int32 hlt_pin;
extern int32 sim_switches;
int32 tti_csr = 0; /* control/status */
int32 tto_csr = 0; /* control/status */
int32 clk_csr = 0; /* control/status */
int32 clk_tps = 100; /* ticks/second */
int32 todr_reg = 0; /* TODR register */
int32 todr_blow = 1; /* TODR battery low */
int32 tmxr_poll = CLK_DELAY * TMXR_MULT; /* term mux poll */
int32 tmr_poll = CLK_DELAY; /* pgm timer poll */
t_stat tti_svc (UNIT *uptr);
t_stat tto_svc (UNIT *uptr);
t_stat clk_svc (UNIT *uptr);
t_stat tti_reset (DEVICE *dptr);
t_stat tto_reset (DEVICE *dptr);
t_stat clk_reset (DEVICE *dptr);
extern int32 sysd_hlt_enb (void);
/* TTI data structures
tti_dev TTI device descriptor
tti_unit TTI unit descriptor
tti_reg TTI register list
*/
DIB tti_dib = { 0, 0, NULL, NULL, 1, IVCL (TTI), SCB_TTI, { NULL } };
UNIT tti_unit = { UDATA (&tti_svc, TT_MODE_8B, 0), KBD_POLL_WAIT };
REG tti_reg[] = {
{ HRDATA (BUF, tti_unit.buf, 16) },
{ HRDATA (CSR, tti_csr, 16) },
{ FLDATA (INT, int_req[IPL_TTI], INT_V_TTI) },
{ FLDATA (DONE, tti_csr, CSR_V_DONE) },
{ FLDATA (IE, tti_csr, CSR_V_IE) },
{ DRDATA (POS, tti_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, tti_unit.wait, 24), REG_NZ + PV_LEFT },
{ NULL }
};
MTAB tti_mod[] = {
{ TT_MODE, TT_MODE_7B, "7b", "7B", NULL },
{ TT_MODE, TT_MODE_8B, "8b", "8B", NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL,
NULL, &show_vec, NULL },
{ 0 }
};
DEVICE tti_dev = {
"TTI", &tti_unit, tti_reg, tti_mod,
1, 10, 31, 1, 16, 8,
NULL, NULL, &tti_reset,
NULL, NULL, NULL,
&tti_dib, 0
};
/* TTO data structures
tto_dev TTO device descriptor
tto_unit TTO unit descriptor
tto_reg TTO register list
*/
DIB tto_dib = { 0, 0, NULL, NULL, 1, IVCL (TTO), SCB_TTO, { NULL } };
UNIT tto_unit = { UDATA (&tto_svc, TT_MODE_8B, 0), SERIAL_OUT_WAIT };
REG tto_reg[] = {
{ HRDATA (BUF, tto_unit.buf, 8) },
{ HRDATA (CSR, tto_csr, 16) },
{ FLDATA (INT, int_req[IPL_TTO], INT_V_TTO) },
{ FLDATA (DONE, tto_csr, CSR_V_DONE) },
{ FLDATA (IE, tto_csr, CSR_V_IE) },
{ DRDATA (POS, tto_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TIME, tto_unit.wait, 24), PV_LEFT },
{ NULL }
};
MTAB tto_mod[] = {
{ TT_MODE, TT_MODE_7B, "7b", "7B", NULL },
{ TT_MODE, TT_MODE_8B, "8b", "8B", NULL },
{ TT_MODE, TT_MODE_7P, "7p", "7P", NULL },
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec },
{ 0 }
};
DEVICE tto_dev = {
"TTO", &tto_unit, tto_reg, tto_mod,
1, 10, 31, 1, 16, 8,
NULL, NULL, &tto_reset,
NULL, NULL, NULL,
&tto_dib, 0
};
/* CLK data structures
clk_dev CLK device descriptor
clk_unit CLK unit descriptor
clk_reg CLK register list
*/
DIB clk_dib = { 0, 0, NULL, NULL, 1, IVCL (CLK), SCB_INTTIM, { NULL } };
UNIT clk_unit = { UDATA (&clk_svc, 0, 0), CLK_DELAY };
REG clk_reg[] = {
{ HRDATA (CSR, clk_csr, 16) },
{ FLDATA (INT, int_req[IPL_CLK], INT_V_CLK) },
{ FLDATA (IE, clk_csr, CSR_V_IE) },
{ DRDATA (TODR, todr_reg, 32), PV_LEFT },
{ FLDATA (BLOW, todr_blow, 0) },
{ DRDATA (TIME, clk_unit.wait, 24), REG_NZ + PV_LEFT },
{ DRDATA (POLL, tmr_poll, 24), REG_NZ + PV_LEFT + REG_HRO },
{ DRDATA (TPS, clk_tps, 8), REG_NZ + PV_LEFT },
{ NULL }
};
MTAB clk_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "VECTOR", NULL, NULL, &show_vec },
{ 0 }
};
DEVICE clk_dev = {
"CLK", &clk_unit, clk_reg, clk_mod,
1, 0, 0, 0, 0, 0,
NULL, NULL, &clk_reset,
NULL, NULL, NULL,
&clk_dib, 0
};
/* Clock and terminal MxPR routines
iccs_rd/wr interval timer
todr_rd/wr time of year clock
rxcs_rd/wr input control/status
rxdb_rd input buffer
txcs_rd/wr output control/status
txdb_wr output buffer
*/
int32 iccs_rd (void)
{
return (clk_csr & CLKCSR_IMP);
}
int32 todr_rd (void)
{
return todr_reg;
}
int32 rxcs_rd (void)
{
return (tti_csr & TTICSR_IMP);
}
int32 rxdb_rd (void)
{
int32 t = tti_unit.buf; /* char + error */
tti_csr = tti_csr & ~CSR_DONE; /* clr done */
tti_unit.buf = tti_unit.buf & 0377; /* clr errors */
CLR_INT (TTI);
return t;
}
int32 txcs_rd (void)
{
return (tto_csr & TTOCSR_IMP);
}
void iccs_wr (int32 data)
{
if ((data & CSR_IE) == 0) CLR_INT (CLK);
clk_csr = (clk_csr & ~CLKCSR_RW) | (data & CLKCSR_RW);
return;
}
void todr_wr (int32 data)
{
todr_reg = data;
if (data) todr_blow = 0;
return;
}
void rxcs_wr (int32 data)
{
if ((data & CSR_IE) == 0) CLR_INT (TTI);
else if ((tti_csr & (CSR_DONE + CSR_IE)) == CSR_DONE)
SET_INT (TTI);
tti_csr = (tti_csr & ~TTICSR_RW) | (data & TTICSR_RW);
return;
}
void txcs_wr (int32 data)
{
if ((data & CSR_IE) == 0) CLR_INT (TTO);
else if ((tto_csr & (CSR_DONE + CSR_IE)) == CSR_DONE)
SET_INT (TTO);
tto_csr = (tto_csr & ~TTOCSR_RW) | (data & TTOCSR_RW);
return;
}
void txdb_wr (int32 data)
{
tto_unit.buf = data & 0377;
tto_csr = tto_csr & ~CSR_DONE;
CLR_INT (TTO);
sim_activate (&tto_unit, tto_unit.wait);
return;
}
/* Terminal input routines
tti_svc process event (character ready)
tti_reset process reset
*/
t_stat tti_svc (UNIT *uptr)
{
int32 c;
sim_activate (uptr, uptr->wait); /* continue poll */
if ((c = sim_poll_kbd ()) < SCPE_KFLAG) return c; /* no char or error? */
if (c & SCPE_BREAK) { /* break? */
if (sysd_hlt_enb ()) hlt_pin = 1; /* if enabled, halt */
tti_unit.buf = TTIBUF_ERR | TTIBUF_FRM | TTIBUF_RBR;
}
else tti_unit.buf = sim_tt_inpcvt (c, TT_GET_MODE (uptr->flags));
uptr->pos = uptr->pos + 1;
tti_csr = tti_csr | CSR_DONE;
if (tti_csr & CSR_IE) SET_INT (TTI);
return SCPE_OK;
}
t_stat tti_reset (DEVICE *dptr)
{
tti_unit.buf = 0;
tti_csr = 0;
CLR_INT (TTI);
sim_activate (&tti_unit, tti_unit.wait); /* activate unit */
return SCPE_OK;
}
/* Terminal output routines
tto_svc process event (character typed)
tto_reset process reset
*/
t_stat tto_svc (UNIT *uptr)
{
int32 c;
t_stat r;
c = sim_tt_outcvt (tto_unit.buf, TT_GET_MODE (uptr->flags));
if (c >= 0) {
if ((r = sim_putchar_s (c)) != SCPE_OK) { /* output; error? */
sim_activate (uptr, uptr->wait); /* retry */
return ((r == SCPE_STALL)? SCPE_OK: r); /* !stall? report */
}
}
tto_csr = tto_csr | CSR_DONE;
if (tto_csr & CSR_IE) SET_INT (TTO);
uptr->pos = uptr->pos + 1;
return SCPE_OK;
}
t_stat tto_reset (DEVICE *dptr)
{
tto_unit.buf = 0;
tto_csr = CSR_DONE;
CLR_INT (TTO);
sim_cancel (&tto_unit); /* deactivate unit */
return SCPE_OK;
}
/* Clock routines
clk_svc process event (clock tick)
clk_reset process reset
todr_powerup powerup for TODR (get date from system)
*/
t_stat clk_svc (UNIT *uptr)
{
int32 t;
if (clk_csr & CSR_IE) SET_INT (CLK);
t = sim_rtcn_calb (clk_tps, TMR_CLK); /* calibrate clock */
sim_activate (&clk_unit, t); /* reactivate unit */
tmr_poll = t; /* set tmr poll */
tmxr_poll = t * TMXR_MULT; /* set mux poll */
if (!todr_blow) todr_reg = todr_reg + 1; /* incr TODR */
return SCPE_OK;
}
t_stat todr_powerup (void)
{
uint32 base;
time_t curr;
struct tm *ctm;
curr = time (NULL); /* get curr time */
if (curr == (time_t) -1) return SCPE_NOFNC; /* error? */
ctm = localtime (&curr); /* decompose */
if (ctm == NULL) return SCPE_NOFNC; /* error? */
base = (((((ctm->tm_yday * 24) + /* sec since 1-Jan */
ctm->tm_hour) * 60) +
ctm->tm_min) * 60) +
ctm->tm_sec;
todr_reg = (base * 100) + 0x10000000; /* cvt to VAX form */
todr_blow = 0;
return SCPE_OK;
}
t_stat clk_reset (DEVICE *dptr)
{
int32 t;
if (sim_switches & SWMASK ('P')) todr_powerup (); /* powerup? */
clk_csr = 0;
CLR_INT (CLK);
t = sim_rtcn_init (clk_unit.wait, TMR_CLK); /* init timer */
sim_activate (&clk_unit, t); /* activate unit */
tmr_poll = t; /* set tmr poll */
tmxr_poll = t * TMXR_MULT; /* set mux poll */
return SCPE_OK;
}