folkert/simh-testsetgenerator
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
simh-testsetgenerator/sim_rev.h
Bob Supnik a12e4a1c39 Notes For V3.5-1 
The source set has been extensively overhauled.  For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.

1. New Features

1.1 3.5-0

1.1.1 All Ethernet devices

- Added Windows user-defined adapter names (from Timothe Litt)

1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors

- Added support for SET <unit>n DISCONNECT

1.1.3 VAX

- Added latent QDSS support
- Revised autoconfigure to handle QDSS

1.1.4 PDP-11

- Revised autoconfigure to handle more cases

1.2 3.5-1

No new features

1.3 3.5-2

1.3.1 All ASCII terminals

- Most ASCII terminal emulators have supported 7-bit and 8-bit
  operation; where required, they have also supported an upper-
  case only or KSR-emulation mode.  This release adds a new mode,
  7P, for 7-bit printing characters.  In 7P mode, non-printing
  characters in the range 0-31 (decimal), and 127 (decimal), are
  automatically suppressed.  This prevents printing of fill
  characters under Windows.

  The printable character set for ASCII code values 0-31 can be
  changed with the SET CONSOLE PCHAR command.  Code value 127
  (DELETE) is always suppressed.

1.3.2 VAX-11/780

- First release.  The VAX-11/780 has successfully run VMS V7.2.  The
  commercial instructions and compatability mode have not been
  extensively tested.  The Ethernet controller is not working yet
  and is disabled.

2. Bugs Fixed

2.1 3.5-0

2.1.1 SCP and libraries

- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators

2.1.2 1401

- Fixed bug, CPU reset was clearing SSB through SSG

2.1.3 PDP-11

- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)

2.1.4 Interdata

- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide

2.1.5 SDS

- Fixed bug in SHOW MUX CONN/STATS

2.1.6 HP

- Fixed bug in SHOW MUX CONN/STATS

2.1.7 PDP-8

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.8 PDP-18b

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.9 Nova, Eclipse

- Fixed potential integer overflow exception in divide

2.2 3.5-1

2.2.1 1401

- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings

2.2.2 1620

- Changed character encodings to be compatible with Pierce 709X simulator

2.2.3 PDP-10

- Changed MOVNI to eliminate GCC warning

2.2.4 VAX

- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table

2.2.5 PDP-11

- Fixed bug in autoconfiguration table

2.3 3.5-2

2.3.1 PDP-10

- RP: fixed drive clear not to clear disk address

2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)

- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)

2.3.3 PDP-8

- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)

2.3.4 VAX

- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected
2011-04-15 08:35:10 -07:00

1568 lines
70 KiB
C
Raw Blame History

/* sim_rev.h: simulator revisions and current rev level
Copyright (c) 1993-2006, Robert M Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
*/
#ifndef _SIM_REV_H_
#define _SIM_REV_H_ 0
#define SIM_MAJOR 3
#define SIM_MINOR 5
#define SIM_PATCH 2
/* V3.5 revision history
patch date module(s) and fix(es)
2 07-Jan-06 scp.c:
- added breakpoint spaces
- added REG_FIT support
sim_console.c: added ASCII character processing routines
sim_tape.c, sim_tape.h:
- added write support for P7B format
- fixed bug in write forward (found by Dave Bryan)
h316_stddev.c, hp2100_stddev.c, hp2100_mux.c, id_tt.c,
id_ttp.c, id_pas.c, pdp8_tt.c, pdp8_ttx.c, pdp11_stddev.c,
pdp11_dz.c, pdp18b_stddev.c, pdp18b_tt1.c, vax_stddev,
gri_stddev.c:
- revised to support new character handling routines
pdp10_rp.c: fixed DCLR not to clear disk address
pdp11_hk.c: fixed overlapped seek interaction with NOP, etc
pdp11_rh.c: added enable/disable routine
pdp11_rq.c, pdp11_tm.c, pdp11_tq.c, pdp11_ts.c
- widened address display to 64b when USE_ADDR64
pdp11_rp.c:
- fixed DCLR not to clear disk address
- fixed device enable/disable logic to include Massbus adapter
- widened address display to 64b when USE_ADDR64
pdp11_tu.c:
- fixed device enable/disable logic to include Massbus adapter
- widened address display to 64b when USE_ADDR64
- changed default adapter to TM03 (for VMS)
pdp8_df.c, pdp8_dt.c, pdp8_rf.c:
- fixed unaligned access bug (found by Doug Carman)
pdp8_rl.c: fixed IOT 61 decoding bug (found by David Gesswein)
vax_cpu.c:
- fixed breakpoint detection when USE_ADDR64 option is active
- fixed CVTfi to trap on integer overflow if PSW<iv> set
1 15-Oct-05 All CPU's, other sources: fixed declaration inconsistencies
(from Sterling Garwood)
i1401_cpu.c: added control for old/new character encodings
i1401_cd.c, i1401_lpt.c, i1401_tty.c:
- changed character encodings to be consistent with 7094
- changed column binary format to be consistent with 7094
- added choice of business or Fortran set for output encoding
i1401_sys.c: changed WM character to ` under new encodings
i1620_cd.c, i1620_lpt.c, i1620_tty.c:
- changed character encodings to be consistent with 7094
pdp10_cpu.c: changed MOVNI to eliminate gcc warning
pdp11_io.c: fixed bug in autoconfiguration (missing XU)
vax_io.c: fixed bug in autoconfiguration (missing XU)
vax_fpa.c: fixed bug in 32b structure definitions (from Jason Stevens)
0 1-Sep-05 Note: most source modules have been edited to improve
readability and to fix declaration and cast problems in C++
all instruction histories: fixed reversed arguments to calloc
scp.c: revised to trim trailing spaces on file inputs
sim_sock.c: fixed SIGPIPE error on Unix
sim_ether.c: added Windows user-defined adapter names (from Timothe Litt)
sim_tape.c: fixed misallocation of TPC map array
sim_tmxr.c: added support for SET <unit> DISCONNECT
hp2100_mux.c: added SET MUXLn DISCONNECT
i1401_cpu.c:
- fixed SSB-SSG clearing on RESET (reported by Ralph Reinke)
- removed error stops in MCE
i1401_cd.c: fixed read, punch to ignore modifier on 1, 4 char inst
(reported by Van Snyder)
id_pas.c:
- fixed bug in SHOW CONN/STATS
- added SET PASLn DISCONNECT
pdp10_ksio.c: revised for new autoconfiguration interface
pdp11_cpu.c: replaced WAIT clock queue check with API call
pdp11_cpumod.c: added additional 11/60 registers
pdp11_io.c: revised autoconfiguration algorithm and interface
pdp11_dz.c: revised for new autoconfiguration interface
pdp11_vh.c:
- revised for new autoconfiguration interface
- fixed bug in vector display routine
pdp11_xu.c: fixed runt packet processing (found by Tim Chapman)
pdp18b_cpu.c, pdp18b_sys.c:
- removed spurious AAS instruction
pdp18b_tt1.c:
- fixed bug in SHOW CONN/STATS
- fixed bug in SET LOG/NOLOG
- added SET TTOXn DISCONNECT
pdp8_ttx.c:
- fixed bug in SHOW CONN/STATS
- fixed bug in SET LOG/NOLOG
- added SET TTOXn DISCONNECT
sds_mux.c:
- fixed bug in SHOW CONN/STATS
- added SET MUXLn DISCONNECT
vaxmod_defs.h: added QDSS support
vax_io.c: revised autoconfiguration algorithm and interface
/* V3.4 revision history
0 01-May-04 scp.c:
- fixed ASSERT code
- revised syntax for SET DEBUG (from Dave Bryan)
- revised interpretation of fprint_sym, fparse_sym returns
- moved DETACH sanity tests into detach_unit
sim_sock.h and sim_sock.c:
- added test for WSAEINPROGRESS (from Tim Riker)
many: revised detach routines to test for attached state
hp2100_cpu.c: reorganized CPU options (from Dave Bryan)
hp2100_cpu1.c: reorganized EIG routines (from Dave Bryan)
hp2100_fp1.c: added FFP support (from Dave Bryan)
id16_cpu.c:
- fixed bug in show history routine (from Mark Hittinger)
- revised examine/deposit to do words rather than bytes
id32_cpu.c:
- fixed bug in initial memory allocation
- fixed bug in show history routine (from Mark Hittinger)
- revised examine/deposit to do words rather than bytes
id16_sys.c, id32_sys:
- revised examine/deposit to do words rather than bytes
pdp10_tu.c:
- fixed bug, ERASE and WREOF should not clear done (reported
by Rich Alderson)
- fixed error reporting
pdp11_tu.c: fixed error reporting
/* V3.3 revision history
2 08-Mar-05 scp.c: added ASSERT command (from Dave Bryan)
h316_defs.h: fixed IORETURN macro
h316_mt.c: fixed error reporting from OCP (found by Philipp Hachtmann)
h316_stddev.c: fixed bug in OCP '0001 (found by Philipp Hachtmann)
hp2100_cpu.c: split out EAU and MAC instructions
hp2100_cpu1.c: (from Dave Bryan)
- fixed missing MPCK on JRS target
- removed EXECUTE instruction (is NOP in actual microcode)
hp2100_fp: (from Dave Bryan)
- fixed missing negative overflow renorm in StoreFP
i1401_lp.c: fixed bug in write_line (reported by Van Snyder)
id32_cpu.c: fixed branches to mask new PC (from Greg Johnson)
pdp11_cpu.c: fixed bugs in RESET for 11/70 (reported by Tim Chapman)
pdp11_cpumod.c:
- fixed bug in SHOW MODEL (from Sergey Okhapkin)
- made SYSID variable for 11/70 (from Tim Chapman)
- added MBRK write case for 11/70 (from Tim Chapman)
pdp11_rq: added RA60, RA71, RA81 disks
pdp11_ry: fixed bug in boot code (reported by Graham Toal)
vax_cpu.c: fixed initial state of cpu_extmem
1 05-Jan-05 h316_cpu.c: fixed bug in DIV
h316_stddev.c:
- fixed bug in SKS '104 (reported by Philipp Hachtmann)
- fixed bug in SKS '504
- adder reader/punch ASCII file support
- added Teletype reader/punch support
h316_dp.c: fixed bug in skip on !seeking
h316_mt.c: fixed bug in DMA/DMC support
h316_lp.c: fixed bug in DMA/DMC support
hp2100_cpu.c:
- fixed DMA reset to clear alternate CTL flop (from Dave Bryan)
- fixed DMA reset to not clear control words (from Dave Bryan)
- fixed SBS, CBS, TBS to do virtual reads
- separated A/B from M[0/1], for DMA IO (from Dave Bryan)
- added SET CPU 21MX-M, 21MX-E (from Dave Brian)
- disabled TIMER/EXECUTE/DIAG instructions for 21MX-M (from Dave Bryan)
- added post-processor to maintain T/M consistency (from Dave Bryan)
hp2100_ds.c: first release
hp2100_lps.c (all changes from Dave Bryan)
- added restart when set online, etc.
- fixed col count for non-printing chars
hp2100_lpt.c (all changes from Dave Bryan)
- added restart when set online, etc.
hp2100_sys.c (all changes from Dave Bryan):
- added STOP_OFFLINE, STOP_PWROFF messages
i1401_sys.c: added address argument support (from Van Snyder)
id_mt.c: added read-only file support
lgp_cpu.c, lgp_sys.c: modified VM pointer setup
pdp11_cpu.c: fixed WAIT to work in all modes (from John Dundas)
pdp11_tm.c, pdp11_ts.c: added read-only file support
sds_mt.c: added read-only file support
0 23-Nov-04 scp.c:
- added reset_all_p (powerup)
- fixed comma-separated SET options (from Dave Bryan)
- changed ONLINE/OFFLINE to ENABLED/DISABLED (from Dave Bryan)
- modified to flush device buffers on stop (from Dave Bryan)
- changed HELP to suppress duplicate command displays
sim_console.c:
- moved SET/SHOW DEBUG under CONSOLE hierarchy
hp2100_cpu.c: (all fixes by Dave Bryan)
- moved MP into its own device; added MP option jumpers
- modified DMA to allow disabling
- modified SET CPU 2100/2116 to truncate memory > 32K
- added -F switch to SET CPU to force memory truncation
- fixed S-register behavior on 2116
- fixed LIx/MIx behavior for DMA on 2116 and 2100
- fixed LIx/MIx behavior for empty I/O card slots
- modified WRU to be REG_HRO
- added BRK and DEL to save console settings
- fixed use of "unsigned int16" in cpu_reset
hp2100_dp.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
- fixed ANY ERROR status for 12557A interface
- fixed unattached drive status for 12557A interface
- status cmd without prior STC DC now completes (12557A)
- OTA/OTB CC on 13210A interface also does CLC CC
- fixed RAR model
- fixed seek check on 13210 if sector out of range
hp2100_dq.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
- shortened xtime from 5 to 3 (drive avg 156KW/second)
- fixed not ready/any error status
- fixed RAR model
hp2100_dr.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
- fixed sector return in status word
- provided protected tracks and "Writing Enabled" status bit
- fixed DMA last word write, incomplete sector fill value
- added "parity error" status return on writes for 12606
- added track origin test for 12606
- added SCP test for 12606
- fixed 12610 SFC operation
- added "Sector Flag" status bit
- added "Read Inhibit" status bit for 12606
- fixed current-sector determination
- added TRACKPROT modifier
hp2100_ipl.c, hp2100_ms.c: (all fixes by Dave Bryan)
- fixed enable/disable from either device
hp2100_lps.c: (all fixes by Dave Bryan)
- added SET OFFLINE/ONLINE, POWEROFF/POWERON
- fixed status returns for error conditions
- fixed handling of non-printing characters
- fixed handling of characters after column 80
- improved timing model accuracy for RTE
- added fast/realistic timing
- added debug printouts
hp2100_lpt.c: (all fixes by Dave Bryan)
- added SET OFFLINE/ONLINE, POWEROFF/POWERON
- fixed status returns for error conditions
- fixed TOF handling so form remains on line 0
hp2100_stddev.c (all fixes by Dave Bryan)
- added paper tape loop mode, DIAG/READER modifiers to PTR
- added PV_LEFT to PTR TRLLIM register
- modified CLK to permit disable
hp2100_sys.c: (all fixes by Dave Bryan)
- added memory protect device
- fixed display of CCA/CCB/CCE instructions
i1401_cpu.c: added =n to SHOW HISTORY
id16_cpu.c: added instruction history
id32_cpu.c: added =n to SHOW HISTORY
pdp10_defs.h: revised Unibus DMA API's
pdp10_ksio.c: revised Unibus DMA API's
pdp10_lp20.c: revised Unibus DMA API's
pdp10_rp.c: replicated register state per drive
pdp10_tu.c:
- fixed to set FCE on short record
- fixed to return bit<15> in drive type
- fixed format specification, 1:0 are don't cares
- implemented write check
- TMK is cleared by new motion command, not DCLR
- DONE is set on data transfers, ATA on non data transfers
pdp11_defs.h:
- revised Unibus/Qbus DMA API's
- added CPU type and options flags
pdp11_cpumod.h, pdp11_cpumod.c:
- new routines for setting CPU type and options
pdp11_io.c: revised Unibus/Qbus DMA API's
all PDP-11 DMA peripherals:
- revised Unibus/Qbus DMA API's
pdp11_hk.c: CS2 OR must be zero for M+
pdp11_rh.c, pdp11_rp.c, pdp11_tu.c:
- split Massbus adapter from controllers
- replicated RP register state per drive
- added TM02/TM03 with TE16/TU45/TU77 drives
pdp11_rq.c, pdp11_tq.c:
- provided different default timing for PDP-11, VAX
- revised to report CPU bus type in stage 1
- revised to report controller type reflecting bus type
- added -L switch (LBNs) to RAUSER size specification
pdp15_cpu.c: added =n to SHOW HISTORY
pdp15_fpp.c:
- fixed URFST to mask low 9b of fraction
- fixed exception PC setting
pdp8_cpu.c: added =n to SHOW HISTORY
vax_defs.h:
- added octaword, compatibility mode support
vax_moddefs.h:
- revised Unibus/Qbus DMA API's
vax_cpu.c:
- moved processor-specific code to vax_sysdev.c
- added =n to SHOW HISTORY
vax_cpu1.c:
- moved processor-specific IPR's to vax_sysdev.c
- moved emulation trap to vax_cis.c
- added support for compatibility mode
vax_cis.c: new full VAX CIS instruction emulator
vax_octa.c: new full VAX octaword and h_floating instruction emulator
vax_cmode.c: new full VAX compatibility mode instruction emulator
vax_io.c:
- revised Unibus/Qbus DMA API's
vax_io.c, vax_stddev.c, vax_sysdev.c:
- integrated powerup into RESET (with -p)
vax_sys.c:
- fixed bugs in parsing indirect displacement modes
- fixed bugs in displaying and parsing character data
vax_syscm.c: added display and parse for compatibility mode
vax_syslist.c:
- split from vax_sys.c
- removed PTR, PTP
/* V3.2 revision history
3 03-Sep-04 scp.c:
- added ECHO command (from Dave Bryan)
- qualified RESTORE detach with SIM_SW_REST
sim_console: added OS/2 EMX fixes (from Holger Veit)
sim_sock.h: added missing definition for OS/2 (from Holger Veit)
hp2100_cpu.c: changed error stops to report PC not PC + 1
(from Dave Bryan)
hp2100_dp.c: functional and timing fixes (from Dave Bryan)
- controller sets ATN for all commands except read status
- controller resumes polling for ATN interrupts after read status
- check status on unattached drive set busy and not ready
- check status tests wrong unit for write protect status
- drive on line sets ATN, will set FLG if polling
hp2100_dr.c: fixed CLC to stop operation (from Dave Bryan)
hp2100_ms.c: functional and timing fixes (from Dave Bryan)
- fixed erroneous execution of rejected command
- fixed erroneous execution of select-only command
- fixed erroneous execution of clear command
- fixed odd byte handling for read
- fixed spurious odd byte status on 13183A EOF
- modified handling of end of medium
- added detailed timing, with fast and realistic modes
- added reel sizes to simulate end of tape
- added debug printouts
hp2100_mt.c: modified handling of end of medium (from Dave Bryan)
hp2100_stddev.c: added tab to control char set (from Dave Bryan)
pdp11_rq.c: VAX controllers luns start at 0 (from Andreas Cejna)
vax_cpu.c: fixed bug in EMODD/G, second word of quad dst not probed
2 17-Jul-04 scp.c: fixed problem ATTACHing to read only files
(found by John Dundas)
sim_console.c: revised Windows console code (from Dave Bryan)
sim_fio.c: fixed problem in big-endian read
(reported by Scott Bailey)
gri_cpu.c: updated MSR, EAO functions
hp_stddev.c: generalized handling of control char echoing
(from Dave Bryan)
vax_sys.c: fixed bad block initialization routine
1 10-Jul-04 scp.c: added SET/SHOW CONSOLE subhierarchy
hp2100_cpu.c: fixes and added features (from Dave Bryan)
- SBT increments B after store
- DMS console map must check dms_enb
- SFS x,C and SFC x,C work
- MP violation clears automatically on interrupt
- SFS/SFC 5 is not gated by protection enabled
- DMS enable does not disable mem prot checks
- DMS status inconsistent at simulator halt
- Examine/deposit are checking wrong addresses
- Physical addresses are 20b not 15b
- Revised DMS to use memory rather than internal format
- Added instruction printout to HALT message
- Added M and T internal registers
- Added N, S, and U breakpoints
Revised IBL facility to conform to microcode
Added DMA EDT I/O pseudo-opcode
Separated DMA SRQ (service request) from FLG
all HP2100 peripherals:
- revised to make SFS x,C and SFC x,C work
- revised to separate SRQ from FLG
all HP2100 IBL bootable peripherals:
- revised boot ROMs to use IBL facility
- revised SR values to preserve SR<5:3>
hp2100_lps.c, hp2100_lpt.c: fixed timing
hp2100_dp.c: fixed interpretation of SR<0>
hp2100_dr.c: revised boot code to use IBL algorithm
hp2100_mt.c, hp2100_ms.c: fixed spurious timing error after CLC
(found by Dave Bryan)
hp2100_stddev.c:
- fixed input behavior during typeout for RTE-IV
- suppressed nulls on TTY output for RTE-IV
hp2100_sys.c: added SFS x,C and SFC x,C to print/parse routines
pdp10_fe.c, pdp11_stddev.c, pdp18b_stddev.c, pdp8_tt.c, vax_stddev.c:
- removed SET TTI CTRL-C option
pdp11_tq.c:
- fixed bug in reporting write protect (reported by Lyle Bickley)
- fixed TK70 model number and media ID (found by Robert Schaffrath)
pdp11_vh.c: added DHQ11 support (from John Dundas)
pdp11_io.c, vax_io.c: fixed DHQ11 autoconfigure (from John Dundas)
pdp11_sys.c, vax_sys.c: added DHQ11 support (from John Dundas)
vax_cpu.c: fixed bug in DIVBx, DIVWx (reported by Peter Trimmel)
0 04-Apr-04 scp.c:
- added sim_vm_parse_addr and sim_vm_fprint_addr
- added REG_VMAD
- moved console logging to SCP
- changed sim_fsize to use descriptor rather than name
- added global device/unit show modifiers
- added device debug support (Dave Hittner)
- moved device and unit flags, updated save format
sim_ether.c:
- further generalizations (Dave Hittner, Mark Pizzolato)
sim_tmxr.h, sim_tmxr.c:
- added tmxr_linemsg
- changed TMXR definition to support variable number of lines
sim_libraries:
- new console library (sim_console.h, sim_console.c)
- new file I/O library (sim_fio.h, sim_fio.c)
- new timer library (sim_timer.h, sim_timer.c)
all terminal multiplexors: revised for tmxr library changes
all DECtapes:
- added STOP_EOR to enable end-of-reel stop
- revised for device debug support
all variable-sized devices: revised for sim_fsize change
eclipse_cpu.c, nova_cpu.c: fixed device enable/disable support
(found by Bruce Ray)
nova_defs.h, nova_sys.c, nova_qty.c:
- added QTY and ALM support (Bruce Ray)
id32_cpu.c, id_dp.c: revised for device debug support
lgp: added LGP-30 [LGP-21] simulator
pdp1_sys.c: fixed bug in LOAD (found by Mark Crispin)
pdp10_mdfp.c:
- fixed bug in floating unpack
- fixed bug in FIXR (found by Philip Stone, fixed by Chris Smith)
pdp11_dz.c: added per-line logging
pdp11_rk.c:
- added formatting support
- added address increment inhibit support
- added transfer overrun detection
pdp11_hk.c, pdp11_rp.c: revised for device debug support
pdp11_rq.c: fixed bug in interrupt control (found by Tom Evans)
pdp11_ry.c: added VAX support
pdp11_tm.c, pdp11_tq.c, pdp11_ts.c: revised for device debug support
pdp11_xu.c: replaced stub with real implementation (Dave Hittner)
pdp18b_cpu.c:
- fixed bug in XVM g_mode implementation
- fixed bug in PDP-15 indexed address calculation
- fixed bug in PDP-15 autoindexed address calculation
pdp18b_fpp.c: fixed bugs in instruction decode
pdp18b_stddev.c:
- fixed clock response to CAF
- fixed bug in hardware read-in mode bootstrap
pdp18b_sys.c: fixed XVM instruction decoding errors
pdp18b_tt1.c: added support for 1-16 additional terminals
vax_moddef.h, vax_cpu.c, vax_sysdev.c:
- added extended physical memory support (Mark Pizzolato)
- added RXV21 support
vax_cpu1.c:
- added PC read fault in EXTxV
- fixed PC write fault in INSV
/* V3.1 revision history
0 29-Dec-03 sim_defs.h, scp.c: added output stall status
all console emulators: added output stall support
sim_ether.c (Dave Hittner, Mark Pizzolato, Anders Ahgren):
- added Alpha/VMS support
- added FreeBSD, Mac OS/X support
- added TUN/TAP support
- added DECnet duplicate address detection
all memory buffered devices (fixed head disks, floppy disks):
- cleaned up buffer copy code
all DECtapes:
- fixed reverse checksum in read all
- added DECtape off reel message
- simplified timing
eclipse_cpu.c (Charles Owen):
- added floating point support
- added programmable interval timer support
- bug fixes
h316_cpu.c:
- added instruction history
- added DMA/DMC support
- added device ENABLE/DISABLE support
- change default to HSA option included
h316_dp.c: added moving head disk support
h316_fhd.c: added fixed head disk support
h316_mt.c: added magtape support
h316_sys.c: added new device support
nova_dkp.c (Charles Owen):
- fixed bug in flag clear sequence
- added diagnostic mode support for disk sizing
` nova_mt.c (Charles Owen):
- fixed bug, space operations return record count
- fixed bug, reset doesn't cancel rewind
nova_sys.c: added floating point, timer support (from Charles Owen)
i1620_cpu.c: fixed bug in branch digit (found by Dave Babcock)
pdp1_drm.c:
- added parallel drum support
- fixed bug in serial drum instructin decoding
pdp1_sys.c: added parallel drum support, mnemonics
pdp11_cpu.c:
- added autoconfiguration controls
- added support for 18b-only Qbus devices
- cleaned up addressing/bus definitions
pdp11_rk.c, pdp11_ry.c, pdp11_tm.c, pdp11_hk.c:
- added Q18 attribute
pdp11_io.c:
- added autoconfiguration controls
- fixed bug in I/O configuration (found by Dave Hittner)
pdp11_rq.c:
- revised MB->LBN conversion for greater accuracy
- fixed bug with multiple RAUSER drives
pdp11_tc.c: changed to be off by default (base config is Qbus)
pdp11_xq.c (Dave Hittner, Mark Pizzolato):
- fixed second controller interrupts
- fixed bugs in multicast and promiscuous setup
pdp18b_cpu.c:
- added instruction history
- fixed PDP-4,-7,-9 autoincrement bug
- change PDP-7,-9 default to API option included
pdp8_defs.h, pdp8_sys.c:
- added DECtape off reel message
- added support for TSC8-75 (ETOS) option
- added support for TD8E controller
pdp8_cpu.c: added instruction history
pdp8_rx.c:
- fixed bug in RX28 read status (found by Charles Dickman)
- fixed double density write
pdp8_td.c: added TD8E controller
pdp8_tsc.c: added TSC8-75 option
vax_cpu.c:
- revised instruction history for dynamic sizing
- added autoconfiguration controls
vax_io.c:
- added autoconfiguration controls
- fixed bug in I/O configuration (found by Dave Hittner)
id16_cpu.c: revised instruction decoding
id32_cpu.c:
- revised instruction decoding
- added instruction history
/* V3.0 revision history
2 15-Sep-03 scp.c:
- fixed end-of-file problem in dep, idep
- fixed error on trailing spaces in dep, idep
pdp1_stddev.c
- fixed system hang if continue after PTR error
- added PTR start/stop functionality
- added address switch functionality to PTR BOOT
pdp1_sys.c: added multibank capability to LOAD
pdp18b_cpu.c:
- fixed priorities in PDP-15 API (PI between 3 and 4)
- fixed sign handling in PDP-15 unsigned mul/div
- fixed bug in CAF, must clear API subsystem
i1401_mt.c:
- fixed tape read end-of-record handling based on real 1401
- added diagnostic read (space forward)
i1620_cpu.c
- fixed bug in immediate index add (found by Michael Short)
1 27-Jul-03 pdp1_cpu.c: updated to detect indefinite I/O wait
pdp1_drm.c: fixed incorrect logical, missing activate, break
pdp1_lp.c:
- fixed bugs in instruction decoding, overprinting
- updated to detect indefinite I/O wait
pdp1_stddev.c:
- changed RIM loader to be "hardware"
- updated to detect indefinite I/O wait
pdp1_sys.c: added block loader format support to LOAD
pdp10_rp.c: fixed bug in read header
pdp11_rq: fixed bug in user disk size (found by Chaskiel M Grundman)
pdp18b_cpu.c:
- added FP15 support
- added XVM support
- added EAE support to the PDP-4
- added PDP-15 "re-entrancy ECO"
- fixed memory protect/skip interaction
- fixed CAF to only reset peripherals
pdp18b_fpp.c: added FP15
pdp18b_lp.c: fixed bug in Type 62 overprinting
pdp18b_rf.c: fixed bug in set size routine
pdp18b_stddev.c:
- increased PTP TIME for PDP-15 operating systems
- added hardware RIM loader for PDP-7, PDP-9, PDP-15
pdp18b_sys.c: added FP15, KT15, XVM instructions
pdp8b_df.c, pdp8_rf.c: fixed bug in set size routine
hp2100_dr.c:
- fixed drum sizes
- fixed variable capacity interaction with SAVE/RESTORE
i1401_cpu.c: revised fetch to model hardware more closely
ibm1130: fixed bugs found by APL 1130
nova_dsk.c: fixed bug in set size routine
altairz80: fixed bug in real-time clock on Windows host
0 15-Jun-03 scp.c:
- added ASSIGN/DEASSIGN
- changed RESTORE to detach files
- added u5, u6 unit fields
- added USE_ADDR64 support
- changed some structure fields to unsigned
scp_tty.c: added extended file seek
sim_sock.c: fixed calling sequence in stubs
sim_tape.c:
- added E11 and TPC format support
- added extended file support
sim_tmxr.c: fixed bug in SHOW CONNECTIONS
all magtapes:
- added multiformat support
- added extended file support
i1401_cpu.c:
- fixed mnemonic, instruction lengths, and reverse
scan length check bug for MCS
- fixed MCE bug, BS off by 1 if zero suppress
- fixed chaining bug, D lost if return to SCP
- fixed H branch, branch occurs after continue
- added check for invalid 8 character MCW, LCA
i1401_mt.c: fixed load-mode end of record response
nova_dsk.c: fixed variable size interaction with restore
pdp1_dt.c: fixed variable size interaction with restore
pdp10_rp.c: fixed ordering bug in attach
pdp11_cpu.c:
- fixed bug in MMR1 update (found by Tim Stark)
- fixed bug in memory size table
pdp11_lp.c, pdp11_rq.c: added extended file support
pdp11_rl.c, pdp11_rp.c, pdp11_ry.c: fixed ordering bug in attach
pdp11_tc.c: fixed variable size interaction with restore
pdp11_xq.c:
- corrected interrupts on IE state transition (code by Tom Evans)
- added interrupt clear on soft reset (first noted by Bob Supnik)
- removed interrupt when setting XL or RL (multiple people)
- added SET/SHOW XQ STATS
- added SHOW XQ FILTERS
- added ability to split received packet into multiple buffers
- added explicit runt & giant packet processing
vax_fpa.c:
- fixed integer overflow bug in CVTfi
- fixed multiple bugs in EMODf
vax_io.c: optimized byte and word DMA routines
vax_sysdev.c:
- added calibrated delay to ROM reads (from Mark Pizzolato)
- fixed calibration problems in interval timer (from Mark Pizzolato)
pdp1_dt.c: fixed variable size interaction with restore
pdp18b_dt.c: fixed variable size interaction with restore
pdp18b_mt.c: fixed bug in MTTR
pdp18b_rf.c: fixed variable size interaction with restore
pdp8_df.c, pdp8_rf.c: fixed variable size interaction
with restore
pdp8_dt.c: fixed variable size interaction with restore
pdp8_mt.c: fixed bug in SKTR
hp2100_dp.c,hp2100_dq.c:
- fixed bug in read status (13210A controller)
- fixed bug in seek completion
id_pt.c: fixed type declaration (found by Mark Pizzolato)
gri_cpu.c: fixed bug in SC queue pointer management
/* V2.10 revision history
4 03-Mar-03 scp.c
- added .ini startup file capability
- added multiple breakpoint actions
- added multiple switch evaluation points
- fixed bug in multiword deposits to file
sim_tape.c: magtape simulation library
h316_stddev.c: added set line frequency command
hp2100_mt.c, hp2100_ms.c: revised to use magtape library
i1401_mt.c: revised to use magtape library
id_dp.c, id_idc.c: fixed cylinder overflow on writes
id_mt.c:
- fixed error handling to stop selector channel
- revised to use magtape library
id16_sys.c, id32_sys.c: added relative addressing support
id_uvc.c:
- added set frequency command to line frequency clock
- improved calibration algorithm for precision clock
nova_clk.c: added set line frequency command
nova_dsk.c: fixed autosizing algorithm
nova_mt.c: revised to use magtape library
pdp10_tu.c: revised to use magtape library
pdp11_cpu.c: fixed bug in MMR1 update (found by Tim Stark)
pdp11_stddev.c
- added set line frequency command
- added set ctrl-c command
pdp11_rq.c:
- fixed ordering problem in queue process
- fixed bug in vector calculation for VAXen
- added user defined drive support
pdp11_ry.c: fixed autosizing algorithm
pdp11_tm.c, pdp11_ts.c: revised to use magtape library
pdp11_tq.c:
- fixed ordering problem in queue process
- fixed overly restrictive test for bad modifiers
- fixed bug in vector calculation for VAXen
- added variable controller, user defined drive support
- revised to use magtape library
pdp18b_cpu.c: fixed three EAE bugs (found by Hans Pufal)
pdp18b_mt.c:
- fixed bugs in BOT error handling, interrupt handling
- revised to use magtape library
pdp18b_rf.c:
- removed 22nd bit from disk address
- fixed autosizing algorithm
pdp18b_stddev.c:
- added set line frequency command
- added set ctrl-c command
pdp18b_sys.c: fixed FMTASC printouts (found by Hans Pufal)
pdp8_clk.c: added set line frequency command
pdp8_df.c, pdp8_rf.c, pdp8_rx.c: fixed autosizing algorithm
pdp8_mt.c:
- fixed bug in BOT error handling
- revised to use magtape library
pdp8_tt.c: added set ctrl-c command
sds_cpu.c: added set line frequency command
sds_mt.c: revised to use magtape library
vax_stddev.c: added set ctrl-c command
3 06-Feb-03 scp.c:
- added dynamic extension of the breakpoint table
- added breakpoint actions
hp2100_cpu.c: fixed last cycle bug in DMA output (found by
Mike Gemeny)
hp2100_ipl.c: individual links are full duplex (found by
Mike Gemeny)
pdp11_cpu.c: changed R, SP to track PSW<rs,cm> respectively
pdp18b_defs.h, pdp18b_sys.c: added RB09 fixed head disk,
LP09 printer
pdp18b_rf.c:
- fixed IOT decoding (found by Hans Pufal)
- fixed address overrun logic
- added variable number of platters and autosizing
pdp18b_rf.c:
- fixed IOT decoding
- fixed bug in command initiation
pdp18b_rb.c: new RB09 fixed head disk
pdp18b_lp.c: new LP09 line printer
pdp8_df.c: added variable number of platters and autosizing
pdp8_rf.c: added variable number of platters and autosizing
nova_dsk.c: added variable number of platters and autosizing
id16_cpu.c: fixed bug in SETM, SETMR (found by Mark Pizzolato)
2 15-Jan-03 scp.c:
- added dynamic memory size flag and RESTORE support
- added EValuate command
- added get_ipaddr routine
- added ! (OS command) feature (from Mark Pizzolato)
- added BREAK support to sim_poll_kbd (from Mark Pizzolato)
sim_tmxr.c:
- fixed bugs in IAC+IAC handling (from Mark Pizzolato)
- added IAC+BRK handling (from Mark Pizzolato)
sim_sock.c:
- added use count for Windows start/stop
- added sim_connect_sock
pdp1_defs.h, pdp1_cpu.c, pdp1_sys.c, pdp1_drm.c:
added Type 24 serial drum
pdp18_defs.h: added PDP-4 drum support
hp2100_cpu.c: added 21MX IOP support
hp2100_ipl.c: added HP interprocessor link support
pdp11_tq.c: fixed bug in transfer end packet length
pdp11_xq.c:
- added VMScluster support (thanks to Mark Pizzolato)
- added major performance enhancements (thanks to Mark Pizzolato)
- added local packet processing
- added system id broadcast
pdp11_stddev.c: changed default to 7b (for early UNIX)
vax_cpu.c, vax_io.c, vax_stddev.c, vax_sysdev.c:
added console halt capability (from Mark Pizzolato)
all terminals and multiplexors: added BREAK support
1 21-Nov-02 pdp1_stddev.c: changed typewriter to half duplex
(found by Derek Peschel)
pdp10_tu.c:
- fixed bug in bootstrap (reported by Michael Thompson)
- fixed bug in read (reported by Harris Newman)
0 15-Nov-02 SCP and libraries
scp.c:
- added Telnet console support
- removed VT emulation support
- added support for statically buffered devices
- added HELP <command>
- fixed bugs in set_logon, ssh_break (found by David Hittner)
- added VMS file optimization (from Robert Alan Byer)
- added quiet mode, DO with parameters, GUI interface,
extensible commands (from Brian Knittel)
- added DEVICE context and flags
- added central device enable/disable support
- modified SAVE/GET to save and restore flags
- modified boot routine calling sequence
scp_tty.c:
- removed VT emulation support
- added sim_os_sleep, renamed sim_poll_kbd, sim_putchar
sim_tmxr.c:
- modified for Telnet console support
- fixed bug in binary (8b) support
sim_sock.c: modified for Telnet console support
sim_ether.c: new library for Ethernet (from David Hittner)
all magtapes:
- added support for end of medium
- cleaned up BOT handling
all DECtapes: added support for RT11 image file format
most terminals and multiplexors:
- added support for 7b vs 8b character processing
PDP-1
pdp1_cpu.c, pdp1_sys.c, pdp1_dt.c: added PDP-1 DECtape support
PDP-8
pdp8_cpu.c, all peripherals:
- added variable device number support
- added new device enabled/disable support
pdp8_rx.c: added RX28/RX02 support
PDP-11
pdp11_defs.h, pdp11_io.c, pdp11_sys.c, all peripherals:
- added variable vector support
- added new device enable/disable support
- added autoconfiguration support
all bootstraps: modified to support variable addresses
dec_mscp.h, pdp11_tq.c: added TK50 support
pdp11_rq.c:
- added multicontroller support
- fixed bug in HBE error log packet
- fixed bug in ATP processing
pdp11_ry.c: added RX211/RX02 support
pdp11_hk.c: added RK611/RK06/RK07 support
pdp11_tq.c: added TMSCP support
pdp11_xq.c: added DEQNA/DELQA support (from David Hittner)
pdp11_pclk.c: added KW11P support
pdp11_ts.c:
- fixed bug in CTL decoding
- fixed bug in extended status XS0_MOT
pdp11_stddev.c: removed paper tape to its own module
PDP-18b
pdp18b_cpu.c, all peripherals:
- added variable device number support
- added new device enabled/disabled support
VAX
dec_dz.h: fixed bug in number of boards calculation
vax_moddefs.h, vax_io.c, vax_sys.c, all peripherals:
- added variable vector support
- added new device enable/disable support
- added autoconfiguration support
vax_sys.c:
- generalized examine/deposit
- added TMSCP, multiple RQDX3, DEQNA/DELQA support
vax_stddev.c: removed paper tape, now uses PDP-11 version
vax_sysdev.c:
- allowed NVR to be attached to file
- removed unused variables (found by David Hittner)
PDP-10
pdp10_defs.h, pdp10_ksio.c, all peripherals:
- added variable vector support
- added new device enable/disable support
pdp10_defs.h, pdp10_ksio.c: added support for standard PDP-11
peripherals, added RX211 support
pdp10_pt.c: rewritten to reference common implementation
Nova, Eclipse:
nova_cpu.c, eclipse_cpu.c, all peripherals:
- added new device enable/disable support
HP2100
hp2100_cpu:
- fixed bugs in the EAU, 21MX, DMS, and IOP instructions
- fixed bugs in the memory protect and DMS functions
- created new options to enable/disable EAU, MPR, DMS
- added new device enable/disable support
hp2100_fp.c:
- recoded to conform to 21MX microcode algorithms
hp2100_stddev.c:
- fixed bugs in TTY reset, OTA, time base generator
- revised BOOT support to conform to RBL loader
- added clock calibration
hp2100_dp.c:
- changed default to 13210A
- added BOOT support
hp2100_dq.c:
- finished incomplete functions, fixed head switching
- added BOOT support
hp2100_ms.c:
- fixed bugs found by diagnostics
- added 13183 support
- added BOOT support
hp2100_mt.c:
- fixed bugs found by diagnostics
- disabled by default
hp2100_lpt.c: implemented 12845A controller
hp2100_lps.c:
- renamed 12653A controller
- added diagnostic mode for MPR, DCPC diagnostics
- disabled by default
IBM 1620: first release
/* V2.9 revision history
11 20-Jul-02 i1401_mt.c: on read, end of record stores group mark
without word mark (found by Van Snyder)
i1401_dp.c: reworked address generation and checking
vax_cpu.c: added infinite loop detection and halt to
boot ROM option (from Mark Pizzolato)
vax_fpa.c: changed function names to prevent conflict
with C math library
pdp11_cpu.c: fixed bug in MMR0 update logic (from
John Dundas)
pdp18b_stddev.c: added "ASCII mode" for reader and
punch (from Hans Pufal)
gri_*.c: added GRI-909 simulator
scp.c: added DO echo, DO exit (from Brian Knittel)
scp_tty.c: added Windows priority hacking (from
Mark Pizzolato)
10 15-Jun-02 scp.c: fixed error checking on calls to fxread/fxwrite
(found by Norm Lastovic)
scp_tty.c, sim_vt.h, sim_vt.c: added VTxxx emulation
support for Windows (from Fischer Franz)
sim_sock.c: added OS/2 support (from Holger Veit)
pdp11_cpu.c: fixed bugs (from John Dundas)
- added special case for PS<15:12> = 1111 to MFPI
- removed special case from MTPI
- added masking of relocation adds
i1401_cpu.c:
- added multiply/divide
- fixed bugs (found by Van Snyder)
o 5 and 7 character H, 7 character doesn't branch
o 8 character NOP
o 1401-like memory dump
i1401_dp.c: added 1311 disk
9 04-May-02 pdp11_rq: fixed bug in polling routine
8 03-May-02 scp.c:
- changed LOG/NOLOG to SET LOG/NOLOG
- added SHOW LOG
- added SET VT/NOVT and SHOW VT for VT emulation
sim_sock.h: changed VMS stropt.h include to ioctl.h
vax_cpu.c
- added TODR powerup routine to set date, time on boot
- fixed exception flows to clear trap request
- fixed register logging in autoincrement indexed
vax_stddev.c: added TODR powerup routine
vax_cpu1.c: fixed exception flows to clear trap request
7 30-Apr-02 scp.c: fixed bug in clock calibration when (real) clock
jumps forward due too far (found by Jonathan Engdahl)
pdp11_cpu.c: fixed bugs, added features (from John Dundas
and Wolfgang Helbig)
- added HTRAP and BPOK to maintenance register
- added trap on kernel HALT if MAINT<HTRAP> set
- fixed red zone trap, clear odd address and nxm traps
- fixed RTS SP, don't increment restored SP
- fixed TSTSET, write dst | 1 rather than prev R0 | 1
- fixed DIV, set N=0,Z=1 on div by zero (J11, 11/70)
- fixed DIV, set set N=Z=0 on overfow (J11, 11/70)
- fixed ASH, ASHC, count = -32 used implementation-
dependent 32 bit right shift
- fixed illegal instruction test to detect 000010
- fixed write-only page test
pdp11_rp.c: fixed SHOW ADDRESS command
vaxmod_defs.h: fixed DZ vector base and number of lines
dec_dz.h:
- fixed interrupt acknowledge routines
- fixed SHOW ADDRESS command
all magtape routines: added test for badly formed
record length (suggested by Jonathan Engdahl)
6 18-Apr-02 vax_cpu.c: fixed CASEL condition codes
vax_cpu1.c: fixed vfield pos > 31 test to be unsigned
vax_fpu.c: fixed EDIV overflow test for 0 quotient
5 14-Apr-02 vax_cpu1.c:
- fixed interrupt, prv_mode set to 0 (found by Tim Stark)
- fixed PROBEx to mask mode to 2b (found by Kevin Handy)
4 1-Apr-02 pdp11_rq.c: fixed bug, reset cleared write protect status
pdp11_ts.c: fixed bug in residual frame count after space
3 15-Mar-02 pdp11_defs.h: changed default model to KDJ11A (11/73)
pdp11_rq.c: adjusted delays for M+ timing bugs
hp2100_cpu.c, pdp10_cpu.c, pdp11_cpu.c: tweaked abort
code for ANSI setjmp/longjmp compliance
hp2100_cpu.c, hp2100_fp.c, hp2100_stddev.c, hp2100_sys.c:
revised to allocate memory dynamically
2 01-Mar-02 pdp11_cpu.c:
- fixed bugs in CPU registers
- fixed double operand evaluation order for M+
pdp11_rq.c: added delays to initialization for
RSX11M+ prior to V4.5
1 20-Feb-02 scp.c: fixed bug in clock calibration when (real)
time runs backwards
pdp11_rq.c: fixed bug in host timeout logic
pdp11_ts.c: fixed bug in message header logic
pdp18b_defs.h, pdp18b_dt.c, pdp18b_sys.c: added
PDP-7 DECtape support
hp2100_cpu.c:
- added floating point and DMS
- fixed bugs in DIV, ASL, ASR, LBT, SBT, CBT, CMW
hp2100_sys.c: added floating point, DMS
hp2100_fp.c: added floating point
ibm1130: added Brian Knittel's IBM 1130 simulator
0 30-Jan-02 scp.c:
- generalized timer package for multiple timers
- added circular register arrays
- fixed bugs, line spacing in modifier display
- added -e switch to attach
- moved device enable/disable to simulators
scp_tty.c: VAX specific fix (from Robert Alan Byer)
sim_tmxr.c, sim_tmxr.h:
- added tmxr_fstats, tmxr_dscln
- renamed tmxr_fstatus to tmxr_fconns
sim_sock.c, sim_sock.h: added VMS support (from
Robert Alan Byer)
pdp_dz.h, pdp18b_tt1.c, nova_tt1.c:
- added SET DISCONNECT
- added SHOW STATISTICS
pdp8_defs.h: fixed bug in interrupt enable initialization
pdp8_ttx.c: rewrote as unified multiplexor
pdp11_cpu.c: fixed calc_MMR1 macro (found by Robert Alan Byer)
pdp11_stddev.c: fixed bugs in KW11L (found by John Dundas)
pdp11_rp.c: fixed bug in 18b mode boot
pdp11 bootable I/O devices: fixed register setup at boot
exit (found by Doug Carman)
hp2100_cpu.c:
- fixed DMA register tables (found by Bill McDermith)
- fixed SZx,SLx,RSS bug (found by Bill McDermith)
- fixed flop restore logic (found by Bill McDermith)
hp2100_mt.c: fixed bug on write of last character
hp2100_dq,dr,ms,mux.c: added new disk, magtape, and terminal
multiplexor controllers
i1401_cd.c, i1401_mt.c: new zero footprint bootstraps
(from Van Snyder)
i1401_sys.c: fixed symbolic display of H, NOP with no trailing
word mark (found by Van Snyder)
most CPUs:
- replaced OLDPC with PC queue
- implemented device enable/disable locally
V2.8 revision history
5 25-Dec-01 scp.c: fixed bug in DO command (found by John Dundas)
pdp10_cpu.c:
- moved trap-in-progress to separate variable
- cleaned up declarations
- cleaned up volatile state for GNU C longjmp
pdp11_cpu.c: cleaned up declarations
pdp11_rq.c: added RA-class disks
4 17-Dec-01 pdp11_rq.c: added delayed processing of packets
3 16-Dec-01 pdp8_cpu.c:
- mode A EAE instructions didn't clear GTF
- ASR shift count > 24 mis-set GTF
- effective shift count == 32 didn't work
2 07-Dec-01 scp.c: added breakpoint package
all CPU's: revised to use new breakpoint package
1 05-Dec-01 scp.c: fixed bug in universal register name logic
0 30-Nov-01 Reorganized simh source and documentation tree
scp: Added DO command, universal registers, extended
SET/SHOW logic
pdp11: overhauled PDP-11 for DMA map support, shared
sources with VAX, dynamic buffer allocation
18b pdp: overhauled interrupt structure
pdp8: added RL8A
pdp10: fixed two ITS-related bugs (found by Dave Conroy)
V2.7 revision history
patch date module(s) and fix(es)
15 23-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: fixed bugs
error interrupt handling
pdp10_defs.h, pdp10_ksio.c, pdp10_fe.c, pdp10_fe.c,
pdp10_rp.c, pdp10_tu.c: reworked I/O page interface
to use symbolic base addresses and lengths
14 20-Oct-01 dec_dz.h, sim_tmxr_h, sim_tmxr.c: fixed bug in Telnet
state handling (found by Thord Nilson), removed
tmxr_getchar, added tmxr_rqln and tmxr_tqln
13 18-Oct-01 pdp11_tm.c: added stub diagnostic register clock
for RSTS/E (found by Thord Nilson)
12 15-Oct-01 pdp11_defs.h, pdp11_cpu.c, pdp11_tc.c, pdp11_ts.c,
pdp11_rp.c: added operations logging
11 8-Oct-01 scp.c: added sim_rev.h include and version print
pdp11_cpu.c: fixed bug in interrupt acknowledge,
multiple outstanding interrupts caused the lowest
rather than the highest to be acknowledged
10 7-Oct-01 pdp11_stddev.c: added monitor bits (CSR<7>) for full
KW11L compatibility, needed for RSTS/E autoconfiguration
9 6-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: rewrote interrupt
logic from RH11/RH70 schematics, to mimic hardware quirks
dec_dz.c: fixed bug in carrier detect logic, carrier
detect was being cleared on next modem poll
8 4-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: undid edit of
28-Sep-01; real problem was level-sensitive nature of
CS1_SC, but CS1_SC can only trigger an interrupt if
DONE is set
7 2-Oct-01 pdp11_rp.c, pdp10_rp.c: CS1_SC is evaluated as a level-
sensitive, rather than an edge-sensitive, input to
interrupt request
6 30-Sep-01 pdp11_rp.c, pdp10_rp.c: separated out CS1<5:0> to per-
drive registers
pdp10_tu.c: based on above, cleaned up handling of
non-existent formatters, fixed non-data transfer
commands clearing DONE
5 28-Sep-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: controller should
interrupt if ATA or SC sets when IE is set, was
interrupting only if DON = 1 as well
4 27-Sep-01 pdp11_ts.c:
- NXM errors should return TC4 or TC5; were returning TC3
- extended features is part of XS2; was returned in XS3
- extended characteristics (fifth) word needed for RSTS/E
pdp11_tc.c: stop, stop all do cause an interrupt
dec_dz.h: scanner should find a ready output line, even
if there are no connections; needed for RSTS/E autoconfigure
scp.c:
- added routine sim_qcount for 1130
- added "simulator exit" detach routine for 1130
sim_defs.h: added header for sim_qcount
3 20-Sep-01 pdp11_ts.c: boot code binary was incorrect
2 19-Sep-01 pdp18b_cpu.c: EAE should interpret initial count of 00
as 100
scp.c: modified Macintosh support
1 17-Sep-01 pdp8_ttx.c: new module for PDP-8 multi-terminal support
pdp18b_tt1.c: modified to use sim_tmxr library
nova_tt1.c: modified to use sim_tmxr library
dec_dz.h: added autodisconnect support
scp.c: removed old multiconsole support
sim_tmxr.c: modified calling sequence for sim_putchar_ln
sim_sock.c: added Macintosh sockets support
*/
#endif
Reference in a new issue View git blame Copy permalink