07f99bb8c3
- This release of the HP 3000 simulator adds the following device simulation:
- 30209A Line Printer Controller with One 2607/13/17/18 Line Printer
The simulation supports the use of custom VFU tape images, as well as the
built-in HP-standard VFU tape. The simulated device name is "LP". The full set
of configurable options is detailed in a new section of the HP 3000 Simulator
User's Guide.
In addition, the preconfigured MPE-V/R disc image has been updated to add the
following features:
- The MPE cold load command files attach the line printer to the "lp.txt"
output file and specify the "-n" option to clear the file before use.
- Preinstalled User-Defined Commands (UDCs) provide access to the COBOL 74
compiler with the MPE-V/E :COBOLII, :COBOLIIPREP, and :COBOLIIGO commands,
and to the COBOL 85 compiler with :COBOLIIX, :COBOLIIXPREP, and :COBOLIIXGO.
However, see the implementation note below.
--------------------
Implementation Notes
--------------------
- MPE requires a line printer, so it is recommended that the MPE startup
simulator command file include an ATTACH LP <filename> command to load paper
into the printer before cold loading. If the printer is not attached, it
will appear to MPE to be out of paper.
- The line printer terminates each print line with an HP-standard CR/LF pair.
If the output file is to be retained as a text file on a Unix system, removal
of the carriage returns, e.g., via the "dos2unix" utility, may be desirable.
- The simulator currently does not provide the HP 32234A COBOL II firmware
instructions, so programs generated by the COBOLII compiler will abort at run
time with an "ILLEGAL INSTRUCTION" error. Programs generated by the COBOL
compiler do not use these instructions and therefore are not affected.
----------
Bugs Fixed
----------
1. PROBLEM: The effective address of a byte pointer with a negative index is
calculated incorrectly.
VERSION: Release 1
OBSERVATION: Defining a :WELCOME message in MPE appears to work, but when
the next logon attempts to print the message, an infinite number of CRLFs
are printed instead.
CAUSE: The welcome message is stored in an extra data segment. The format
for each message line is a line length stored in the lower byte of the word
preceding the message string. The code defines BYTE POINTER NEXTLINE and
points NEXTLINE to the first message character. The line length is set
with NEXTLINE(-1) := IOCOUNT. This generates a LOAD <IOCOUNT> ; LDXN 1 ;
STB <NEXTLINE>,I,X sequence.
In the "cpu_ea" routine, the indexing adds the X register value (-1) to the
byte pointer (NEXTLINE). This causes an overflow that is not masked to 16
bits. For a word access, this displacement is added to the base register
and then masked to 16 bits, which gives the correct value. However, for
byte accesses, the displacement is divided by 2 and then added, and the sum
is masked. Dividing by 2 shifts the overflow bit into the MSB, causing the
addition result to be off by 32K. The STB goes to the wrong location, the
original zero in the length byte location is retained, and when the welcome
message is printed, a zero-length line is printed, and the byte pointer is
incremented by zero, so the null line is printed forever.
RESOLUTION: Modify "cpu_ea" (hp3000_cpu.c) to mask indexed displacements
to 16 bits after adding the X register value.
STATUS: Fixed in Release 2.
2. PROBLEM: An SMSK instruction may clear the interrupt mask flip-flop of a
device that specifies that it is should be "always enabled."
VERSION: Release 1
OBSERVATION: If the TOS word is zero, an SMSK instruction will clear the
interrupt mask flip-flop of a device whose mask jumper is set to "E"
(always enabled).
CAUSE: In response to a DSETMASK signal, device interfaces set their
interrupt mask flip-flops by "anding" the incoming data word with the
interrupt mask jumper setting. The jumper setting value for "always
enabled" is %177777, which sets the mask flip-flop in all cases, except
when the data word is zero.
RESOLUTION: Modify hp3000_atc.c, hp3000_ds.c, and hp3000_ms.c to set their
mask flip-flops unconditionally if the jumper setting is "E".
STATUS: Fixed in Release 2.
3. PROBLEM: The "SET <dev> INTMASK=<n>" command sets the wrong bit in the
device interface's interrupt mask jumper setting.
VERSION: Release 1
OBSERVATION: The interrupt mask jumper on a device interface is set by
specifying the mask bit number in a "SET <dev> INTMASK=<n>" command. This
sets a bit in the device's interrupt mask jumper word corresponding to the
bit number requested. However, the bit numbering is incorrect; setting the
jumper for bit 15, for example, sets bit 0 of the jumper word. Therefore,
the interface's mask flip-flop is not set as expected when an SMSK
instruction is executed.
CAUSE: The bit numbers were counted from the wrong end of the word.
RESOLUTION: Modify "hp_set_dib" and "hp_show_dib" (hp3000_sys.c) to number
the bits from the MSB instead of the LSB.
STATUS: Fixed in Release 2.
4. PROBLEM: The Multiplexer Channel is not generating the ACKSR signal
correctly.
VERSION: Release 1
OBSERVATION: The line printer controller hangs when an SIO chained write
is performed. The first programmed write completes normally, but the
second does not start. The channel is waiting for a service request that
does not occur.
CAUSE: The service request from the last write of the first block transfer
is being cleared by an ACKSR generated by the Multiplexer Channel when it
performs the IOCW fetch in State A for the second write request. The
channel should omit this ACKSR when the previous I/O order was a chained
read or write. However, the simulator is testing the order just fetched
(Write) instead of the order that has just completed (Write Chained).
RESOLUTION: Modify "mpx_service" (hp3000_mpx.c) to test the correct I/O
order in State A.
STATUS: Fixed in Release 2.
1795 lines
74 KiB
Makefile
1795 lines
74 KiB
Makefile
#
|
|
# This GNU make makefile has been tested on:
|
|
# Linux (x86 & Sparc & PPC)
|
|
# OS X
|
|
# Solaris (x86 & Sparc) (gcc and Sun C)
|
|
# OpenBSD
|
|
# NetBSD
|
|
# FreeBSD
|
|
# HP-UX
|
|
# AIX
|
|
# Windows (MinGW & cygwin)
|
|
# Linux x86 targeting Android (using agcc script)
|
|
# Haiku x86 (with gcc4)
|
|
#
|
|
# Android targeted builds should invoke GNU make with GCC=agcc on
|
|
# the command line.
|
|
#
|
|
# In general, the logic below will detect and build with the available
|
|
# features which the host build environment provides.
|
|
#
|
|
# Dynamic loading of libpcap is the preferred default behavior if pcap.h
|
|
# is available at build time. Support to statically linking against libpcap
|
|
# is deprecated and may be removed in the future. Static linking against
|
|
# libpcap can be enabled if GNU make is invoked with USE_NETWORK=1 on the
|
|
# command line.
|
|
#
|
|
# Some platforms may not have vendor supplied libpcap available. HP-UX is
|
|
# one such example. The packages which are available for this platform
|
|
# install include files and libraries in user specified directories. In
|
|
# order for this makefile to locate where these components may have been
|
|
# installed, gmake should be invoked with LPATH=/usr/lib:/usr/local/lib
|
|
# defined (adjusted as needed depending on where they may be installed).
|
|
#
|
|
# The default build will build compiler optimized binaries.
|
|
# If debugging is desired, then GNU make can be invoked with
|
|
# DEBUG=1 on the command line.
|
|
#
|
|
# simh project support is provided for simulators that are built with
|
|
# dependent packages provided with the or by the operating system
|
|
# distribution OR for platforms where that isn't directly available (OS X)
|
|
# by packages from specific package management systems (MacPorts). Users
|
|
# wanting to build simulators with locally build dependent packages or
|
|
# packages provided by an unsupported package management system can
|
|
# override where this procedure looks for include files and/or libraries.
|
|
# Overrides can be specified by define exported environment variables or
|
|
# GNU make command line arguments which specify INCLUDES and/or LIBRARIES.
|
|
# Each of these, if specified, must be the complete list include directories
|
|
# or library directories that should be used with each element separated by
|
|
# colons. (i.e. INCLUDES=/usr/include/:/usr/local/include/:...)
|
|
#
|
|
# Some environments may have the LLVM (clang) compiler installed as
|
|
# an alternate to gcc. If you want to build with the clang compiler,
|
|
# invoke make with GCC=clang.
|
|
#
|
|
# Internal ROM support can be disabled if GNU make is invoked with
|
|
# DONT_USE_ROMS=1 on the command line.
|
|
#
|
|
# Asynchronous I/O support can be disabled if GNU make is invoked with
|
|
# NOASYNCH=1 on the command line.
|
|
#
|
|
# For linting (or other code analyzers) make may be invoked similar to:
|
|
#
|
|
# make GCC=cppcheck CC_OUTSPEC= LDFLAGS= CFLAGS_G="--enable=all --template=gcc" CC_STD=--std=c99
|
|
#
|
|
# CC Command (and platform available options). (Poor man's autoconf)
|
|
#
|
|
ifeq (old,$(shell gmake --version /dev/null 2>&1 | grep 'GNU Make' | awk '{ if ($$3 < "3.81") {print "old"} }'))
|
|
GMAKE_VERSION = $(shell gmake --version /dev/null 2>&1 | grep 'GNU Make' | awk '{ print $$3 }')
|
|
$(warning *** Warning *** GNU Make Version $(GMAKE_VERSION) is too old to)
|
|
$(warning *** Warning *** fully process this makefile)
|
|
endif
|
|
BUILD_SINGLE := $(MAKECMDGOALS) $(BLANK_SUFFIX)
|
|
# building the pdp1, pdp11, tx-0, or any microvax simulator could use video support
|
|
ifneq (,$(or $(findstring XXpdp1XX,$(addsuffix XX,$(addprefix XX,$(MAKECMDGOALS)))),$(findstring pdp11,$(MAKECMDGOALS)),$(findstring tx-0,$(MAKECMDGOALS)),$(findstring microvax1,$(MAKECMDGOALS)),$(findstring microvax2,$(MAKECMDGOALS)),$(findstring microvax3900,$(MAKECMDGOALS)),$(findstring XXvaxXX,$(addsuffix XX,$(addprefix XX,$(MAKECMDGOALS))))))
|
|
VIDEO_USEFUL = true
|
|
endif
|
|
# building the besm6 needs both video support and fontfile support
|
|
ifneq (,$(findstring besm6,$(MAKECMDGOALS)))
|
|
VIDEO_USEFUL = true
|
|
BESM6_BUILD = true
|
|
endif
|
|
# building the pdp11, pdp10, or any vax simulator could use networking support
|
|
ifneq (,$(or $(findstring pdp11,$(MAKECMDGOALS)),$(findstring pdp10,$(MAKECMDGOALS)),$(findstring vax,$(MAKECMDGOALS)),$(findstring all,$(MAKECMDGOALS))))
|
|
NETWORK_USEFUL = true
|
|
ifneq (,$(findstring all,$(MAKECMDGOALS))$(word 2,$(MAKECMDGOALS)))
|
|
BUILD_MULTIPLE = s
|
|
VIDEO_USEFUL = true
|
|
BESM6_BUILD = true
|
|
endif
|
|
else
|
|
ifeq ($(MAKECMDGOALS),)
|
|
# default target is all
|
|
NETWORK_USEFUL = true
|
|
VIDEO_USEFUL = true
|
|
BUILD_MULTIPLE = s
|
|
BUILD_SINGLE := all $(BUILD_SINGLE)
|
|
BESM6_BUILD = true
|
|
endif
|
|
endif
|
|
find_exe = $(abspath $(strip $(firstword $(foreach dir,$(strip $(subst :, ,$(PATH))),$(wildcard $(dir)/$(1))))))
|
|
find_lib = $(abspath $(strip $(firstword $(foreach dir,$(strip $(LIBPATH)),$(wildcard $(dir)/lib$(1).$(LIBEXT))))))
|
|
find_include = $(abspath $(strip $(firstword $(foreach dir,$(strip $(INCPATH)),$(wildcard $(dir)/$(1).h)))))
|
|
ifneq ($(findstring Windows,$(OS)),)
|
|
ifeq ($(findstring .exe,$(SHELL)),.exe)
|
|
# MinGW
|
|
WIN32 := 1
|
|
else # Msys or cygwin
|
|
ifeq (MINGW,$(findstring MINGW,$(shell uname)))
|
|
$(info *** This makefile can not be used with the Msys bash shell)
|
|
$(error *** Use build_mingw.bat $(MAKECMDGOALS) from a Windows command prompt)
|
|
endif
|
|
endif
|
|
endif
|
|
ifeq ($(WIN32),) #*nix Environments (&& cygwin)
|
|
ifeq ($(GCC),)
|
|
ifeq (,$(shell which gcc 2>/dev/null))
|
|
$(info *** Warning *** Using local cc since gcc isn't available locally.)
|
|
$(info *** Warning *** You may need to install gcc to build working simulators.)
|
|
GCC = cc
|
|
else
|
|
GCC = gcc
|
|
endif
|
|
endif
|
|
OSTYPE = $(shell uname)
|
|
# OSNAME is used in messages to indicate the source of libpcap components
|
|
OSNAME = $(OSTYPE)
|
|
ifeq (SunOS,$(OSTYPE))
|
|
TEST = /bin/test
|
|
else
|
|
TEST = test
|
|
endif
|
|
ifeq (CYGWIN,$(findstring CYGWIN,$(OSTYPE))) # uname returns CYGWIN_NT-n.n-ver
|
|
OSTYPE = cygwin
|
|
OSNAME = windows-build
|
|
endif
|
|
ifeq (,$(shell $(GCC) -v /dev/null 2>&1 | grep 'clang'))
|
|
GCC_VERSION = $(shell $(GCC) -v /dev/null 2>&1 | grep 'gcc version' | awk '{ print $$3 }')
|
|
COMPILER_NAME = GCC Version: $(GCC_VERSION)
|
|
ifeq (,$(GCC_VERSION))
|
|
ifeq (SunOS,$(OSTYPE))
|
|
ifneq (,$(shell $(GCC) -V 2>&1 | grep 'Sun C'))
|
|
SUNC_VERSION = $(shell $(GCC) -V 2>&1 | grep 'Sun C')
|
|
COMPILER_NAME = $(wordlist 2,10,$(SUNC_VERSION))
|
|
CC_STD = -std=c99
|
|
endif
|
|
endif
|
|
ifeq (HP-UX,$(OSTYPE))
|
|
ifneq (,$(shell what `which $(firstword $(GCC)) 2>&1`| grep -i compiler))
|
|
COMPILER_NAME = $(strip $(shell what `which $(firstword $(GCC)) 2>&1` | grep -i compiler))
|
|
CC_STD = -std=gnu99
|
|
endif
|
|
endif
|
|
else
|
|
ifeq (,$(findstring ++,$(GCC)))
|
|
CC_STD = -std=gnu99
|
|
else
|
|
CPP_BUILD = 1
|
|
endif
|
|
endif
|
|
else
|
|
ifeq (Apple,$(shell $(GCC) -v /dev/null 2>&1 | grep 'Apple' | awk '{ print $$1 }'))
|
|
COMPILER_NAME = $(shell $(GCC) -v /dev/null 2>&1 | grep 'Apple' | awk '{ print $$1 " " $$2 " " $$3 " " $$4 }')
|
|
CLANG_VERSION = $(word 4,$(COMPILER_NAME))
|
|
else
|
|
COMPILER_NAME = $(shell $(GCC) -v /dev/null 2>&1 | grep 'clang version' | awk '{ print $$1 " " $$2 " " $$3 }')
|
|
CLANG_VERSION = $(word 3,$(COMPILER_NAME))
|
|
ifeq (,$(findstring .,$(CLANG_VERSION)))
|
|
COMPILER_NAME = $(shell $(GCC) -v /dev/null 2>&1 | grep 'clang version' | awk '{ print $$1 " " $$2 " " $$3 " " $$4 }')
|
|
CLANG_VERSION = $(word 4,$(COMPILER_NAME))
|
|
endif
|
|
endif
|
|
ifeq (,$(findstring ++,$(GCC)))
|
|
CC_STD = -std=c99
|
|
else
|
|
CPP_BUILD = 1
|
|
endif
|
|
endif
|
|
ifeq (git-repo,$(shell if $(TEST) -d ./.git; then echo git-repo; fi))
|
|
ifeq (need-hooks,$(shell if $(TEST) ! -e ./.git/hooks/post-checkout; then echo need-hooks; fi))
|
|
$(info *** Installing git hooks in local repository ***)
|
|
GIT_HOOKS += $(shell /bin/cp './Visual Studio Projects/git-hooks/post-commit' ./.git/hooks/)
|
|
GIT_HOOKS += $(shell /bin/cp './Visual Studio Projects/git-hooks/post-checkout' ./.git/hooks/)
|
|
GIT_HOOKS += $(shell /bin/cp './Visual Studio Projects/git-hooks/post-merge' ./.git/hooks/)
|
|
GIT_HOOKS += $(shell ./.git/hooks/post-checkout)
|
|
ifneq (,$(strip $(GIT_HOOKS)))
|
|
$(info *** Warning - Error installing git hooks *** $(GIT_HOOKS))
|
|
endif
|
|
endif
|
|
endif
|
|
LTO_EXCLUDE_VERSIONS =
|
|
PCAPLIB = pcap
|
|
ifeq (agcc,$(findstring agcc,$(GCC))) # Android target build?
|
|
OS_CCDEFS = -D_GNU_SOURCE
|
|
ifeq (,$(NOASYNCH))
|
|
OS_CCDEFS += -DSIM_ASYNCH_IO
|
|
endif
|
|
OS_LDFLAGS = -lm
|
|
else # Non-Android Builds
|
|
ifeq (,$(INCLUDES)$(LIBRARIES))
|
|
INCPATH:=/usr/include
|
|
LIBPATH:=/usr/lib
|
|
else
|
|
$(info *** Warning ***)
|
|
ifeq (,$(INCLUDES))
|
|
INCPATH:=$(shell LANG=C; $(GCC) -x c -v -E /dev/null 2>&1 | grep -A 10 '> search starts here' | grep '^ ' | tr -d '\n')
|
|
else
|
|
$(info *** Warning *** Unsupported build with INCLUDES defined as: $(INCLUDES))
|
|
INCPATH:=$(strip $(subst :, ,$(INCLUDES)))
|
|
UNSUPPORTED_BUILD := include
|
|
endif
|
|
ifeq (,$(LIBRARIES))
|
|
LIBPATH:=/usr/lib
|
|
else
|
|
$(info *** Warning *** Unsupported build with LIBRARIES defined as: $(LIBRARIES))
|
|
LIBPATH:=$(strip $(subst :, ,$(LIBRARIES)))
|
|
ifeq (include,$(UNSUPPORTED_BUILD))
|
|
UNSUPPORTED_BUILD := include+lib
|
|
else
|
|
UNSUPPORTED_BUILD := lib
|
|
endif
|
|
endif
|
|
$(info *** Warning ***)
|
|
endif
|
|
OS_CCDEFS = -D_GNU_SOURCE
|
|
GCC_OPTIMIZERS_CMD = $(GCC) -v --help 2>&1
|
|
GCC_WARNINGS_CMD = $(GCC) -v --help 2>&1
|
|
LD_ELF = $(shell echo | $(GCC) -E -dM - | grep __ELF__)
|
|
ifeq (Darwin,$(OSTYPE))
|
|
OSNAME = OSX
|
|
LIBEXT = dylib
|
|
ifneq (include,$(findstring include,$(UNSUPPORTED_BUILD)))
|
|
INCPATH:=$(shell LANG=C; $(GCC) -x c -v -E /dev/null 2>&1 | grep -A 10 '> search starts here' | grep '^ ' | grep -v 'framework directory' | tr -d '\n')
|
|
endif
|
|
ifeq (incopt,$(shell if $(TEST) -d /opt/local/include; then echo incopt; fi))
|
|
INCPATH += /opt/local/include
|
|
OS_CCDEFS += -I/opt/local/include
|
|
endif
|
|
ifeq (libopt,$(shell if $(TEST) -d /opt/local/lib; then echo libopt; fi))
|
|
LIBPATH += /opt/local/lib
|
|
OS_LDFLAGS += -L/opt/local/lib
|
|
endif
|
|
ifeq (libXt,$(shell if $(TEST) -d /usr/X11/lib; then echo libXt; fi))
|
|
LIBPATH += /usr/X11/lib
|
|
OS_LDFLAGS += -L/usr/X11/lib
|
|
endif
|
|
else
|
|
ifeq (Linux,$(OSTYPE))
|
|
ifneq (lib,$(findstring lib,$(UNSUPPORTED_BUILD)))
|
|
LIBPATH := $(sort $(foreach lib,$(shell /sbin/ldconfig -p | grep ' => /' | sed 's/^.* => //'),$(dir $(lib))))
|
|
endif
|
|
LIBEXT = so
|
|
else
|
|
ifeq (SunOS,$(OSTYPE))
|
|
OSNAME = Solaris
|
|
ifneq (lib,$(findstring lib,$(UNSUPPORTED_BUILD)))
|
|
LIBPATH := $(shell LANG=C; crle | grep 'Default Library Path' | awk '{ print $$5 }' | sed 's/:/ /g')
|
|
endif
|
|
LIBEXT = so
|
|
OS_LDFLAGS += -lsocket -lnsl
|
|
ifeq (incsfw,$(shell if $(TEST) -d /opt/sfw/include; then echo incsfw; fi))
|
|
INCPATH += /opt/sfw/include
|
|
OS_CCDEFS += -I/opt/sfw/include
|
|
endif
|
|
ifeq (libsfw,$(shell if $(TEST) -d /opt/sfw/lib; then echo libsfw; fi))
|
|
LIBPATH += /opt/sfw/lib
|
|
OS_LDFLAGS += -L/opt/sfw/lib -R/opt/sfw/lib
|
|
endif
|
|
OS_CCDEFS += -D_LARGEFILE_SOURCE
|
|
else
|
|
ifeq (cygwin,$(OSTYPE))
|
|
# use 0readme_ethernet.txt documented Windows pcap build components
|
|
INCPATH += ../windows-build/winpcap/WpdPack/include
|
|
LIBPATH += ../windows-build/winpcap/WpdPack/lib
|
|
PCAPLIB = wpcap
|
|
LIBEXT = a
|
|
else
|
|
ifneq (,$(findstring AIX,$(OSTYPE)))
|
|
OS_LDFLAGS += -lm -lrt
|
|
ifeq (incopt,$(shell if $(TEST) -d /opt/freeware/include; then echo incopt; fi))
|
|
INCPATH += /opt/freeware/include
|
|
OS_CCDEFS += -I/opt/freeware/include
|
|
endif
|
|
ifeq (libopt,$(shell if $(TEST) -d /opt/freeware/lib; then echo libopt; fi))
|
|
LIBPATH += /opt/freeware/lib
|
|
OS_LDFLAGS += -L/opt/freeware/lib
|
|
endif
|
|
else
|
|
ifneq (,$(findstring Haiku,$(OSTYPE)))
|
|
HAIKU_ARCH=$(shell getarch)
|
|
ifeq ($(HAIKU_ARCH),)
|
|
$(error Missing getarch command, your Haiku release is probably too old)
|
|
endif
|
|
ifeq ($(HAIKU_ARCH),x86_gcc2)
|
|
$(error Unsupported arch x86_gcc2. Run setarch x86 and retry)
|
|
endif
|
|
INCPATH := $(shell findpaths -e -a $(HAIKU_ARCH) B_FIND_PATH_HEADERS_DIRECTORY)
|
|
INCPATH += $(shell findpaths -e B_FIND_PATH_HEADERS_DIRECTORY posix)
|
|
LIBPATH := $(shell findpaths -e -a $(HAIKU_ARCH) B_FIND_PATH_DEVELOP_LIB_DIRECTORY)
|
|
OS_LDFLAGS += -lnetwork
|
|
else
|
|
ifeq (,$(findstring NetBSD,$(OSTYPE)))
|
|
ifneq (no ldconfig,$(findstring no ldconfig,$(shell which ldconfig 2>&1)))
|
|
LDSEARCH :=$(shell LANG=C; ldconfig -r | grep 'search directories' | awk '{print $$3}' | sed 's/:/ /g')
|
|
endif
|
|
ifneq (,$(LDSEARCH))
|
|
LIBPATH := $(LDSEARCH)
|
|
else
|
|
ifeq (,$(strip $(LPATH)))
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** The library search path on your $(OSTYPE) platform can't be)
|
|
$(info *** Warning *** determined. This should be resolved before you can expect)
|
|
$(info *** Warning *** to have fully working simulators.)
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** You can specify your library paths via the LPATH environment)
|
|
$(info *** Warning *** variable.)
|
|
$(info *** Warning ***)
|
|
else
|
|
LIBPATH = $(subst :, ,$(LPATH))
|
|
endif
|
|
endif
|
|
OS_LDFLAGS += $(patsubst %,-L%,$(LIBPATH))
|
|
endif
|
|
endif
|
|
endif
|
|
ifeq (usrpkglib,$(shell if $(TEST) -d /usr/pkg/lib; then echo usrpkglib; fi))
|
|
LIBPATH += /usr/pkg/lib
|
|
INCPATH += /usr/pkg/include
|
|
OS_LDFLAGS += -L/usr/pkg/lib -R/usr/pkg/lib
|
|
OS_CCDEFS += -I/usr/pkg/include
|
|
endif
|
|
ifeq (X11R7,$(shell if $(TEST) -d /usr/X11R7/lib; then echo X11R7; fi))
|
|
LIBPATH += /usr/X11R7/lib
|
|
INCPATH += /usr/X11R7/include
|
|
OS_LDFLAGS += -L/usr/X11R7/lib -R/usr/X11R7/lib
|
|
OS_CCDEFS += -I/usr/X11R7/include
|
|
endif
|
|
ifeq (/usr/local/lib,$(findstring /usr/local/lib,$(LIBPATH)))
|
|
INCPATH += /usr/local/include
|
|
OS_CCDEFS += -I/usr/local/include
|
|
endif
|
|
ifneq (,$(findstring NetBSD,$(OSTYPE))$(findstring FreeBSD,$(OSTYPE))$(findstring AIX,$(OSTYPE)))
|
|
LIBEXT = so
|
|
else
|
|
ifeq (HP-UX,$(OSTYPE))
|
|
ifeq (ia64,$(shell uname -m))
|
|
LIBEXT = so
|
|
else
|
|
LIBEXT = sl
|
|
endif
|
|
OS_CCDEFS += -D_HPUX_SOURCE -D_LARGEFILE64_SOURCE
|
|
OS_LDFLAGS += -Wl,+b:
|
|
NO_LTO = 1
|
|
else
|
|
LIBEXT = a
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
# Some gcc versions don't support LTO, so only use LTO when the compiler is known to support it
|
|
ifeq (,$(NO_LTO))
|
|
ifneq (,$(GCC_VERSION))
|
|
ifeq (,$(shell $(GCC) -v /dev/null 2>&1 | grep '\-\-enable-lto'))
|
|
LTO_EXCLUDE_VERSIONS += $(GCC_VERSION)
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
$(info lib paths are: $(LIBPATH))
|
|
$(info include paths are: $(INCPATH))
|
|
need_search = $(strip $(shell ld -l$(1) /dev/null 2>&1 | grep $(1) | sed s/$(1)//))
|
|
LD_SEARCH_NEEDED := $(call need_search,ZzzzzzzZ)
|
|
ifneq (,$(call find_lib,m))
|
|
OS_LDFLAGS += -lm
|
|
$(info using libm: $(call find_lib,m))
|
|
endif
|
|
ifneq (,$(call find_lib,rt))
|
|
OS_LDFLAGS += -lrt
|
|
$(info using librt: $(call find_lib,rt))
|
|
endif
|
|
ifneq (,$(call find_include,pthread))
|
|
ifneq (,$(call find_lib,pthread))
|
|
OS_CCDEFS += -DUSE_READER_THREAD
|
|
ifeq (,$(NOASYNCH))
|
|
OS_CCDEFS += -DSIM_ASYNCH_IO
|
|
endif
|
|
OS_LDFLAGS += -lpthread
|
|
$(info using libpthread: $(call find_lib,pthread) $(call find_include,pthread))
|
|
else
|
|
LIBEXTSAVE := $(LIBEXT)
|
|
LIBEXT = a
|
|
ifneq (,$(call find_lib,pthread))
|
|
OS_CCDEFS += -DUSE_READER_THREAD
|
|
ifeq (,$(NOASYNCH))
|
|
OS_CCDEFS += -DSIM_ASYNCH_IO
|
|
endif
|
|
OS_LDFLAGS += -lpthread
|
|
$(info using libpthread: $(call find_lib,pthread) $(call find_include,pthread))
|
|
else
|
|
ifneq (,$(findstring Haiku,$(OSTYPE)))
|
|
OS_CCDEFS += -DUSE_READER_THREAD
|
|
ifeq (,$(NOASYNCH))
|
|
OS_CCDEFS += -DSIM_ASYNCH_IO
|
|
endif
|
|
$(info using libpthread: $(call find_include,pthread))
|
|
endif
|
|
endif
|
|
LIBEXT = $(LIBEXTSAVE)
|
|
endif
|
|
endif
|
|
# Find available RegEx library. Prefer libpcreposix.
|
|
ifneq (,$(call find_include,pcreposix))
|
|
ifneq (,$(call find_lib,pcreposix))
|
|
OS_CCDEFS += -DHAVE_PCREPOSIX_H
|
|
OS_LDFLAGS += -lpcreposix
|
|
$(info using libpcreposix: $(call find_lib,pcreposix) $(call find_include,pcreposix))
|
|
ifeq ($(LD_SEARCH_NEEDED),$(call need_search,pcreposix))
|
|
OS_LDFLAGS += -L$(dir $(call find_lib,pcreposix))
|
|
endif
|
|
endif
|
|
else
|
|
# If libpcreposix isn't available, fall back to the local regex.h
|
|
# Presume that the local regex support is available in the C runtime
|
|
# without a specific reference to a library. This may not be true on
|
|
# some platforms.
|
|
ifneq (,$(call find_include,regex))
|
|
OS_CCDEFS += -DHAVE_REGEX_H
|
|
$(info using regex: $(call find_include,regex))
|
|
endif
|
|
endif
|
|
ifneq (,$(call find_include,dlfcn))
|
|
ifneq (,$(call find_lib,dl))
|
|
OS_CCDEFS += -DHAVE_DLOPEN=$(LIBEXT)
|
|
OS_LDFLAGS += -ldl
|
|
$(info using libdl: $(call find_lib,dl) $(call find_include,dlfcn))
|
|
else
|
|
ifneq (,$(findstring BSD,$(OSTYPE))$(findstring AIX,$(OSTYPE))$(findstring Haiku,$(OSTYPE)))
|
|
OS_CCDEFS += -DHAVE_DLOPEN=so
|
|
$(info using libdl: $(call find_include,dlfcn))
|
|
else
|
|
ifneq (,$(call find_lib,dld))
|
|
OS_CCDEFS += -DHAVE_DLOPEN=$(LIBEXT)
|
|
OS_LDFLAGS += -ldld
|
|
$(info using libdld: $(call find_lib,dld) $(call find_include,dlfcn))
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
ifneq (,$(call find_include,png))
|
|
ifneq (,$(call find_lib,png))
|
|
OS_CCDEFS += -DHAVE_LIBPNG
|
|
OS_LDFLAGS += -lpng
|
|
$(info using libpng: $(call find_lib,png) $(call find_include,png))
|
|
endif
|
|
endif
|
|
ifneq (,$(call find_include,glob))
|
|
OS_CCDEFS += -DHAVE_GLOB
|
|
else
|
|
ifneq (,$(call find_include,fnmatch))
|
|
OS_CCDEFS += -DHAVE_FNMATCH
|
|
endif
|
|
endif
|
|
ifneq (,$(call find_include,sys/mman))
|
|
ifneq (,$(shell grep shm_open $(call find_include,sys/mman)))
|
|
OS_CCDEFS += -DHAVE_SHM_OPEN
|
|
$(info using mman: $(call find_include,sys/mman))
|
|
endif
|
|
endif
|
|
ifneq (,$(VIDEO_USEFUL))
|
|
ifeq (cygwin,$(OSTYPE))
|
|
LIBEXTSAVE := $(LIBEXT)
|
|
LIBEXT = dll.a
|
|
endif
|
|
ifneq (,$(call find_include,SDL2/SDL))
|
|
ifneq (,$(call find_lib,SDL2))
|
|
VIDEO_CCDEFS += -DHAVE_LIBSDL -DUSE_SIM_VIDEO `$(realpath $(dir $(call find_include,SDL2/SDL))../../bin/sdl2-config) --cflags`
|
|
VIDEO_LDFLAGS += `$(realpath $(dir $(call find_include,SDL2/SDL))../../bin/sdl2-config) --libs`
|
|
VIDEO_FEATURES = - video capabilities provided by libSDL2 (Simple Directmedia Layer)
|
|
DISPLAYL = ${DISPLAYD}/display.c $(DISPLAYD)/sim_ws.c
|
|
DISPLAYVT = ${DISPLAYD}/vt11.c
|
|
DISPLAY_OPT += -DUSE_DISPLAY $(VIDEO_CCDEFS) $(VIDEO_LDFLAGS)
|
|
$(info using libSDL2: $(call find_include,SDL2/SDL))
|
|
ifeq (Darwin,$(OSTYPE))
|
|
VIDEO_CCDEFS += -DSDL_MAIN_AVAILABLE
|
|
endif
|
|
endif
|
|
else
|
|
ifneq (,$(call find_include,SDL/SDL))
|
|
ifneq (,$(call find_lib,SDL))
|
|
VIDEO_CCDEFS += -DHAVE_LIBSDL -DUSE_SIM_VIDEO `$(realpath $(dir $(call find_include,SDL/SDL))../../bin/sdl-config) --cflags`
|
|
VIDEO_LDFLAGS += `$(realpath $(dir $(call find_include,SDL/SDL))../../bin/sdl-config) --libs`
|
|
VIDEO_FEATURES = - video capabilities provided by libSDL (Simple Directmedia Layer)
|
|
DISPLAYL = ${DISPLAYD}/display.c $(DISPLAYD)/sim_ws.c
|
|
DISPLAYVT = ${DISPLAYD}/vt11.c
|
|
DISPLAY_OPT += -DUSE_DISPLAY $(VIDEO_CCDEFS) $(VIDEO_LDFLAGS)
|
|
$(info using libSDL: $(call find_include,SDL/SDL))
|
|
ifeq (Darwin,$(OSTYPE))
|
|
VIDEO_CCDEFS += -DSDL_MAIN_AVAILABLE
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
ifeq (cygwin,$(OSTYPE))
|
|
LIBEXT = $(LIBEXTSAVE)
|
|
endif
|
|
ifeq (,$(findstring HAVE_LIBSDL,$(VIDEO_CCDEFS)))
|
|
$(info *** Info ***)
|
|
$(info *** Info *** The simulator$(BUILD_MULTIPLE) you are building could provide more)
|
|
$(info *** Info *** functionality if video support were available on your system.)
|
|
ifeq (Darwin,$(OSTYPE))
|
|
$(info *** Info *** Install the MacPorts libSDL2 packaged to provide this)
|
|
$(info *** Info *** functionality for your OS X system:)
|
|
$(info *** Info *** # port install libsdl2)
|
|
else
|
|
ifneq (,$(and $(findstring Linux,$(OSTYPE)),$(call find_exe,apt-get)))
|
|
$(info *** Info *** Install the development components of libSDL or libSDL2)
|
|
$(info *** Info *** packaged for your operating system distribution for)
|
|
$(info *** Info *** your Linux system:)
|
|
$(info *** Info *** # apt-get install libsdl2-dev)
|
|
$(info *** Info *** or)
|
|
$(info *** Info *** # apt-get install libsdl-dev)
|
|
else
|
|
$(info *** Info *** Install the development components of libSDL packaged by your)
|
|
$(info *** Info *** operating system distribution and rebuild your simulator to)
|
|
$(info *** Info *** enable this extra functionality.)
|
|
endif
|
|
endif
|
|
$(info *** Info ***)
|
|
endif
|
|
endif
|
|
ifneq (,$(NETWORK_USEFUL))
|
|
ifneq (,$(call find_include,pcap))
|
|
ifneq (,$(shell grep 'pcap/pcap.h' $(call find_include,pcap) | grep include))
|
|
PCAP_H_PATH = $(dir $(call find_include,pcap))pcap/pcap.h
|
|
else
|
|
PCAP_H_PATH = $(call find_include,pcap)
|
|
endif
|
|
ifneq (,$(shell grep pcap_compile $(PCAP_H_PATH) | grep const))
|
|
BPF_CONST_STRING = -DBPF_CONST_STRING
|
|
endif
|
|
NETWORK_CCDEFS += -DHAVE_PCAP_NETWORK -I$(dir $(call find_include,pcap)) $(BPF_CONST_STRING)
|
|
NETWORK_LAN_FEATURES += PCAP
|
|
ifneq (,$(call find_lib,$(PCAPLIB)))
|
|
ifneq ($(USE_NETWORK),) # Network support specified on the GNU make command line
|
|
NETWORK_CCDEFS += -DUSE_NETWORK
|
|
ifeq (,$(findstring Linux,$(OSTYPE))$(findstring Darwin,$(OSTYPE)))
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** Statically linking against libpcap is provides no measurable)
|
|
$(info *** Warning *** benefits over dynamically linking libpcap.)
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** Support for linking this way is currently deprecated and may be removed)
|
|
$(info *** Warning *** in the future.)
|
|
$(info *** Warning ***)
|
|
else
|
|
$(info *** Error ***)
|
|
$(info *** Error *** Statically linking against libpcap is provides no measurable)
|
|
$(info *** Error *** benefits over dynamically linking libpcap.)
|
|
$(info *** Error ***)
|
|
$(info *** Error *** Support for linking statically has been removed on the $(OSTYPE))
|
|
$(info *** Error *** platform.)
|
|
$(info *** Error ***)
|
|
$(error Retry your build without specifying USE_NETWORK=1)
|
|
endif
|
|
ifeq (cygwin,$(OSTYPE))
|
|
# cygwin has no ldconfig so explicitly specify pcap object library
|
|
NETWORK_LDFLAGS = -L$(dir $(call find_lib,$(PCAPLIB))) -Wl,-R,$(dir $(call find_lib,$(PCAPLIB))) -l$(PCAPLIB)
|
|
else
|
|
NETWORK_LDFLAGS = -l$(PCAPLIB)
|
|
endif
|
|
$(info using libpcap: $(call find_lib,$(PCAPLIB)) $(call find_include,pcap))
|
|
NETWORK_FEATURES = - static networking support using $(OSNAME) provided libpcap components
|
|
else # default build uses dynamic libpcap
|
|
NETWORK_CCDEFS += -DUSE_SHARED
|
|
$(info using libpcap: $(call find_include,pcap))
|
|
NETWORK_FEATURES = - dynamic networking support using $(OSNAME) provided libpcap components
|
|
endif
|
|
else
|
|
LIBEXTSAVE := $(LIBEXT)
|
|
LIBEXT = a
|
|
ifneq (,$(call find_lib,$(PCAPLIB)))
|
|
NETWORK_CCDEFS += -DUSE_NETWORK
|
|
NETWORK_LDFLAGS := -L$(dir $(call find_lib,$(PCAPLIB))) -l$(PCAPLIB)
|
|
NETWORK_FEATURES = - static networking support using $(OSNAME) provided libpcap components
|
|
$(info using libpcap: $(call find_lib,$(PCAPLIB)) $(call find_include,pcap))
|
|
endif
|
|
LIBEXT = $(LIBEXTSAVE)
|
|
endif
|
|
else
|
|
# On non-Linux platforms, we'll still try to provide deprecated support for libpcap in /usr/local
|
|
INCPATHSAVE := $(INCPATH)
|
|
ifeq (,$(findstring Linux,$(OSTYPE)))
|
|
# Look for package built from tcpdump.org sources with default install target (or cygwin winpcap)
|
|
INCPATH += /usr/local/include
|
|
PCAP_H_FOUND = $(call find_include,pcap)
|
|
endif
|
|
ifneq (,$(strip $(PCAP_H_FOUND)))
|
|
ifneq (,$(shell grep 'pcap/pcap.h' $(call find_include,pcap) | grep include))
|
|
PCAP_H_PATH = $(dir $(call find_include,pcap))pcap/pcap.h
|
|
else
|
|
PCAP_H_PATH = $(call find_include,pcap)
|
|
endif
|
|
ifneq (,$(shell grep pcap_compile $(PCAP_H_PATH) | grep const))
|
|
BPF_CONST_STRING = -DBPF_CONST_STRING
|
|
endif
|
|
LIBEXTSAVE := $(LIBEXT)
|
|
# first check if binary - shared objects are available/installed in the linker known search paths
|
|
ifneq (,$(call find_lib,$(PCAPLIB)))
|
|
NETWORK_CCDEFS = -DUSE_SHARED -I$(dir $(call find_include,pcap)) $(BPF_CONST_STRING)
|
|
NETWORK_FEATURES = - dynamic networking support using libpcap components from www.tcpdump.org and locally installed libpcap.$(LIBEXT)
|
|
$(info using libpcap: $(call find_include,pcap))
|
|
else
|
|
LIBPATH += /usr/local/lib
|
|
LIBEXT = a
|
|
ifneq (,$(call find_lib,$(PCAPLIB)))
|
|
$(info using libpcap: $(call find_lib,$(PCAPLIB)) $(call find_include,pcap))
|
|
ifeq (cygwin,$(OSTYPE))
|
|
NETWORK_CCDEFS = -DUSE_NETWORK -DHAVE_PCAP_NETWORK -I$(dir $(call find_include,pcap)) $(BPF_CONST_STRING)
|
|
NETWORK_LDFLAGS = -L$(dir $(call find_lib,$(PCAPLIB))) -Wl,-R,$(dir $(call find_lib,$(PCAPLIB))) -l$(PCAPLIB)
|
|
NETWORK_FEATURES = - static networking support using libpcap components located in the cygwin directories
|
|
else
|
|
NETWORK_CCDEFS := -DUSE_NETWORK -DHAVE_PCAP_NETWORK -isystem -I$(dir $(call find_include,pcap)) $(BPF_CONST_STRING) $(call find_lib,$(PCAPLIB))
|
|
NETWORK_FEATURES = - networking support using libpcap components from www.tcpdump.org
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) being built with networking support using)
|
|
$(info *** Warning *** libpcap components from www.tcpdump.org.)
|
|
$(info *** Warning *** Some users have had problems using the www.tcpdump.org libpcap)
|
|
$(info *** Warning *** components for simh networking. For best results, with)
|
|
$(info *** Warning *** simh networking, it is recommended that you install the)
|
|
$(info *** Warning *** libpcap-dev (or libpcap-devel) package from your $(OSNAME) distribution)
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** Building with the components manually installed from www.tcpdump.org)
|
|
$(info *** Warning *** is officially deprecated. Attempting to do so is unsupported.)
|
|
$(info *** Warning ***)
|
|
endif
|
|
else
|
|
$(error using libpcap: $(call find_include,pcap) missing $(PCAPLIB).$(LIBEXT))
|
|
endif
|
|
NETWORK_LAN_FEATURES += PCAP
|
|
endif
|
|
LIBEXT = $(LIBEXTSAVE)
|
|
else
|
|
INCPATH = $(INCPATHSAVE)
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) are being built WITHOUT)
|
|
$(info *** Warning *** libpcap networking support)
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** To build simulator(s) with libpcap networking support you)
|
|
ifneq (,$(and $(findstring Linux,$(OSTYPE)),$(call find_exe,apt-get)))
|
|
$(info *** Warning *** should install the libpcap development components for)
|
|
$(info *** Warning *** for your Linux system:)
|
|
$(info *** Warning *** # apt-get install libpcap-dev)
|
|
else
|
|
$(info *** Warning *** should read 0readme_ethernet.txt and follow the instructions)
|
|
$(info *** Warning *** regarding the needed libpcap development components for your)
|
|
$(info *** Warning *** $(OSTYPE) platform)
|
|
endif
|
|
$(info *** Warning ***)
|
|
endif
|
|
endif
|
|
# Consider other network connections
|
|
ifneq (,$(call find_lib,vdeplug))
|
|
# libvdeplug requires the use of the OS provided libpcap
|
|
ifeq (,$(findstring usr/local,$(NETWORK_CCDEFS)))
|
|
ifneq (,$(call find_include,libvdeplug))
|
|
# Provide support for vde networking
|
|
NETWORK_CCDEFS += -DHAVE_VDE_NETWORK
|
|
NETWORK_LAN_FEATURES += VDE
|
|
ifeq (,$(findstring USE_NETWORK,$(NETWORK_CCDEFS))$(findstring USE_SHARED,$(NETWORK_CCDEFS)))
|
|
NETWORK_CCDEFS += -DUSE_NETWORK
|
|
endif
|
|
ifeq (Darwin,$(OSTYPE))
|
|
NETWORK_LDFLAGS += -lvdeplug -L$(dir $(call find_lib,vdeplug))
|
|
else
|
|
NETWORK_LDFLAGS += -lvdeplug -Wl,-R,$(dir $(call find_lib,vdeplug)) -L$(dir $(call find_lib,vdeplug))
|
|
endif
|
|
$(info using libvdeplug: $(call find_lib,vdeplug) $(call find_include,libvdeplug))
|
|
endif
|
|
endif
|
|
endif
|
|
ifeq (,$(findstring HAVE_VDE_NETWORK,$(NETWORK_CCDEFS)))
|
|
# Support is available on Linux for libvdeplug. Advise on its usage
|
|
ifneq (,$(findstring Linux,$(OSTYPE)))
|
|
ifneq (,$(findstring USE_NETWORK,$(NETWORK_CCDEFS))$(findstring USE_SHARED,$(NETWORK_CCDEFS)))
|
|
$(info *** Info ***)
|
|
$(info *** Info *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) are being built with)
|
|
$(info *** Info *** minimal libpcap networking support)
|
|
$(info *** Info ***)
|
|
endif
|
|
$(info *** Info ***)
|
|
$(info *** Info *** Simulators on your $(OSNAME) platform can also be built with)
|
|
$(info *** Info *** extended LAN Ethernet networking support by using VDE Ethernet.)
|
|
$(info *** Info ***)
|
|
$(info *** Info *** To build simulator(s) with extended networking support you)
|
|
ifeq (Darwin,$(OSTYPE))
|
|
$(info *** Info *** should install the MacPorts vde2 package to provide this)
|
|
$(info *** Info *** functionality for your OS X system:)
|
|
$(info *** Info *** # port install vde2)
|
|
else
|
|
ifneq (,$(and $(findstring Linux,$(OSTYPE)),$(call find_exe,apt-get)))
|
|
$(info *** Info *** should install the vde2 package to provide this)
|
|
$(info *** Info *** functionality for your $(OSNAME) system:)
|
|
$(info *** Info *** # apt-get install vde2)
|
|
else
|
|
$(info *** Info *** should read 0readme_ethernet.txt and follow the instructions)
|
|
$(info *** Info *** regarding the needed libvdeplug components for your $(OSNAME))
|
|
$(info *** Info *** platform)
|
|
endif
|
|
endif
|
|
$(info *** Info ***)
|
|
endif
|
|
endif
|
|
ifneq (,$(call find_include,linux/if_tun))
|
|
# Provide support for Tap networking on Linux
|
|
NETWORK_CCDEFS += -DHAVE_TAP_NETWORK
|
|
NETWORK_LAN_FEATURES += TAP
|
|
ifeq (,$(findstring USE_NETWORK,$(NETWORK_CCDEFS))$(findstring USE_SHARED,$(NETWORK_CCDEFS)))
|
|
NETWORK_CCDEFS += -DUSE_NETWORK
|
|
endif
|
|
endif
|
|
ifeq (bsdtuntap,$(shell if $(TEST) -e /usr/include/net/if_tun.h -o -e /Library/Extensions/tap.kext; then echo bsdtuntap; fi))
|
|
# Provide support for Tap networking on BSD platforms (including OS X)
|
|
NETWORK_CCDEFS += -DHAVE_TAP_NETWORK -DHAVE_BSDTUNTAP
|
|
NETWORK_LAN_FEATURES += TAP
|
|
ifeq (,$(findstring USE_NETWORK,$(NETWORK_CCDEFS))$(findstring USE_SHARED,$(NETWORK_CCDEFS)))
|
|
NETWORK_CCDEFS += -DUSE_NETWORK
|
|
endif
|
|
endif
|
|
ifeq (slirp,$(shell if $(TEST) -e slirp_glue/sim_slirp.c; then echo slirp; fi))
|
|
NETWORK_CCDEFS += -Islirp -Islirp_glue -Islirp_glue/qemu -DHAVE_SLIRP_NETWORK -DUSE_SIMH_SLIRP_DEBUG slirp/*.c slirp_glue/*.c
|
|
NETWORK_LAN_FEATURES += NAT(SLiRP)
|
|
endif
|
|
ifeq (,$(findstring USE_NETWORK,$(NETWORK_CCDEFS))$(findstring USE_SHARED,$(NETWORK_CCDEFS))$(findstring HAVE_VDE_NETWORK,$(NETWORK_CCDEFS)))
|
|
NETWORK_CCDEFS += -DUSE_NETWORK
|
|
NETWORK_FEATURES = - WITHOUT Local LAN networking support
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) are being built WITHOUT LAN networking support)
|
|
$(info *** Warning ***)
|
|
$(info *** Warning *** To build simulator(s) with networking support you should read)
|
|
$(info *** Warning *** 0readme_ethernet.txt and follow the instructions regarding the)
|
|
$(info *** Warning *** needed libpcap components for your $(OSTYPE) platform)
|
|
$(info *** Warning ***)
|
|
endif
|
|
NETWORK_OPT = $(NETWORK_CCDEFS)
|
|
endif
|
|
ifneq (binexists,$(shell if $(TEST) -e BIN; then echo binexists; fi))
|
|
MKDIRBIN = mkdir -p BIN
|
|
endif
|
|
ifeq (commit-id-exists,$(shell if $(TEST) -e .git-commit-id; then echo commit-id-exists; fi))
|
|
GIT_COMMIT_ID=$(shell cat .git-commit-id)
|
|
else
|
|
ifeq (,$(shell grep 'define SIM_GIT_COMMIT_ID' sim_rev.h | grep 'Format:'))
|
|
GIT_COMMIT_ID=$(shell grep 'define SIM_GIT_COMMIT_ID' sim_rev.h | awk '{ print $$3 }')
|
|
endif
|
|
endif
|
|
else
|
|
#Win32 Environments (via MinGW32)
|
|
GCC := gcc
|
|
GCC_Path := $(abspath $(dir $(word 1,$(wildcard $(addsuffix /$(GCC).exe,$(subst ;, ,$(PATH)))))))
|
|
ifeq (rename-build-support,$(shell if exist ..\windows-build-windows-build echo rename-build-support))
|
|
REMOVE_OLD_BUILD := $(shell if exist ..\windows-build rmdir/s/q ..\windows-build)
|
|
FIXED_BUILD := $(shell move ..\windows-build-windows-build ..\windows-build >NUL)
|
|
endif
|
|
GCC_VERSION = $(word 3,$(shell $(GCC) --version))
|
|
COMPILER_NAME = GCC Version: $(GCC_VERSION)
|
|
ifeq (,$(findstring ++,$(GCC)))
|
|
CC_STD = -std=gnu99
|
|
else
|
|
CPP_BUILD = 1
|
|
endif
|
|
LTO_EXCLUDE_VERSIONS = 4.5.2
|
|
ifeq (,$(PATH_SEPARATOR))
|
|
PATH_SEPARATOR := ;
|
|
endif
|
|
INCPATH = $(abspath $(wildcard $(GCC_Path)\..\include $(subst $(PATH_SEPARATOR), ,$(CPATH)) $(subst $(PATH_SEPARATOR), ,$(C_INCLUDE_PATH))))
|
|
LIBPATH = $(abspath $(wildcard $(GCC_Path)\..\lib $(subst :, ,$(LIBRARY_PATH))))
|
|
$(info lib paths are: $(LIBPATH))
|
|
$(info include paths are: $(INCPATH))
|
|
# Give preference to any MinGW provided threading (if available)
|
|
ifneq (,$(call find_include,pthread))
|
|
PTHREADS_CCDEFS = -DUSE_READER_THREAD
|
|
ifeq (,$(NOASYNCH))
|
|
PTHREADS_CCDEFS += -DSIM_ASYNCH_IO
|
|
endif
|
|
PTHREADS_LDFLAGS = -lpthread
|
|
else
|
|
ifeq (pthreads,$(shell if exist ..\windows-build\pthreads\Pre-built.2\include\pthread.h echo pthreads))
|
|
PTHREADS_CCDEFS = -DUSE_READER_THREAD -DPTW32_STATIC_LIB -D_POSIX_C_SOURCE -I../windows-build/pthreads/Pre-built.2/include
|
|
ifeq (,$(NOASYNCH))
|
|
PTHREADS_CCDEFS += -DSIM_ASYNCH_IO
|
|
endif
|
|
PTHREADS_LDFLAGS = -lpthreadGC2 -L..\windows-build\pthreads\Pre-built.2\lib
|
|
endif
|
|
endif
|
|
ifeq (pcap,$(shell if exist ..\windows-build\winpcap\Wpdpack\include\pcap.h echo pcap))
|
|
NETWORK_LDFLAGS =
|
|
NETWORK_OPT = -DUSE_SHARED -I../windows-build/winpcap/Wpdpack/include
|
|
NETWORK_FEATURES = - dynamic networking support using windows-build provided libpcap components
|
|
NETWORK_LAN_FEATURES += PCAP
|
|
else
|
|
ifneq (,$(call find_include,pcap))
|
|
NETWORK_LDFLAGS =
|
|
NETWORK_OPT = -DUSE_SHARED
|
|
NETWORK_FEATURES = - dynamic networking support using libpcap components found in the MinGW directories
|
|
NETWORK_LAN_FEATURES += PCAP
|
|
endif
|
|
endif
|
|
ifneq (,$(VIDEO_USEFUL))
|
|
SDL_INCLUDE = $(word 1,$(shell dir /b /s ..\windows-build\libSDL\SDL.h))
|
|
ifeq (SDL.h,$(findstring SDL.h,$(SDL_INCLUDE)))
|
|
VIDEO_CCDEFS += -DHAVE_LIBSDL -I$(abspath $(dir $(SDL_INCLUDE)))
|
|
VIDEO_LDFLAGS += -lSDL2 -L$(abspath $(dir $(SDL_INCLUDE))\..\lib)
|
|
VIDEO_FEATURES = - video capabilities provided by libSDL2 (Simple Directmedia Layer)
|
|
else
|
|
$(info ***********************************************************************)
|
|
$(info ***********************************************************************)
|
|
$(info ** This build could produce simulators with video capabilities. **)
|
|
$(info ** However, the required files to achieve this can't be found on **)
|
|
$(info ** this system. Download the file: **)
|
|
$(info ** https://github.com/simh/windows-build/archive/windows-build.zip **)
|
|
$(info ** Extract the windows-build-windows-build folder it contains to **)
|
|
$(info ** $(abspath ..\) **)
|
|
$(info ***********************************************************************)
|
|
$(info ***********************************************************************)
|
|
$(info .)
|
|
endif
|
|
endif
|
|
OS_CCDEFS += -fms-extensions $(PTHREADS_CCDEFS)
|
|
OS_LDFLAGS += -lm -lwsock32 -lwinmm $(PTHREADS_LDFLAGS)
|
|
EXE = .exe
|
|
ifneq (binexists,$(shell if exist BIN echo binexists))
|
|
MKDIRBIN = if not exist BIN mkdir BIN
|
|
endif
|
|
ifneq ($(USE_NETWORK),)
|
|
NETWORK_OPT += -DUSE_SHARED
|
|
endif
|
|
ifneq (,$(shell if exist .git-commit-id type .git-commit-id))
|
|
GIT_COMMIT_ID=$(shell if exist .git-commit-id type .git-commit-id)
|
|
else
|
|
ifeq (,$(shell findstr /C:"define SIM_GIT_COMMIT_ID" sim_rev.h | findstr Format))
|
|
GIT_COMMIT_ID=$(shell for /F "tokens=3" %%i in ("$(shell findstr /C:"define SIM_GIT_COMMIT_ID" sim_rev.h)") do echo %%i)
|
|
endif
|
|
endif
|
|
ifneq (windows-build,$(shell if exist ..\windows-build\README.md echo windows-build))
|
|
$(info ***********************************************************************)
|
|
$(info ***********************************************************************)
|
|
$(info ** This build is operating without the required windows-build **)
|
|
$(info ** components and therefore will produce less than optimal **)
|
|
$(info ** simulator operation and features. **)
|
|
$(info ** Download the file: **)
|
|
$(info ** https://github.com/simh/windows-build/archive/windows-build.zip **)
|
|
$(info ** Extract the windows-build-windows-build folder it contains to **)
|
|
$(info ** $(abspath ..\) **)
|
|
$(info ***********************************************************************)
|
|
$(info ***********************************************************************)
|
|
$(info .)
|
|
else
|
|
# Version check on windows-build
|
|
WINDOWS_BUILD = $(shell findstr WINDOWS-BUILD ..\windows-build\Windows-Build_Versions.txt)
|
|
ifeq (,$(WINDOWS_BUILD))
|
|
WINDOWS_BUILD = 00000000
|
|
endif
|
|
ifneq (,$(shell if 20150412 GTR $(WINDOWS_BUILD) echo old-windows-build))
|
|
$(info .)
|
|
$(info windows-build components at: $(abspath ..\windows-build))
|
|
$(info .)
|
|
$(info ***********************************************************************)
|
|
$(info ***********************************************************************)
|
|
$(info ** This currently available windows-build components are out of **)
|
|
$(info ** date. For the most functional and stable features you shoud **)
|
|
$(info ** Download the file: **)
|
|
$(info ** https://github.com/simh/windows-build/archive/windows-build.zip **)
|
|
$(info ** Extract the windows-build-windows-build folder it contains to **)
|
|
$(info ** $(abspath ..\) **)
|
|
$(info ***********************************************************************)
|
|
$(info ***********************************************************************)
|
|
$(info .)
|
|
endif
|
|
ifeq (pcre,$(shell if exist ..\windows-build\PCRE\include\pcre.h echo pcre))
|
|
OS_CCDEFS += -DHAVE_PCREPOSIX_H -DPCRE_STATIC -I$(abspath ../windows-build/PCRE/include)
|
|
OS_LDFLAGS += -lpcreposix -lpcre -L../windows-build/PCRE/lib/
|
|
$(info using libpcreposix: $(abspath ../windows-build/PCRE/lib/pcreposix.a) $(abspath ../windows-build/PCRE/include/pcreposix.h))
|
|
endif
|
|
ifeq (slirp,slirp)
|
|
NETWORK_OPT += -Islirp -Islirp_glue -Islirp_glue/qemu -DHAVE_SLIRP_NETWORK -DUSE_SIMH_SLIRP_DEBUG slirp/*.c slirp_glue/*.c -lIphlpapi
|
|
NETWORK_LAN_FEATURES += NAT(SLiRP)
|
|
endif
|
|
endif
|
|
endif # Win32 (via MinGW)
|
|
ifneq (,$(GIT_COMMIT_ID))
|
|
CFLAGS_GIT = -DSIM_GIT_COMMIT_ID=$(GIT_COMMIT_ID)
|
|
endif
|
|
ifneq (,$(UNSUPPORTED_BUILD))
|
|
CFLAGS_GIT += -DSIM_BUILD=Unsupported=$(UNSUPPORTED_BUILD)
|
|
endif
|
|
ifneq ($(DEBUG),)
|
|
CFLAGS_G = -g -ggdb -g3
|
|
CFLAGS_O = -O0
|
|
BUILD_FEATURES = - debugging support
|
|
else
|
|
ifneq (clang,$(findstring clang,$(COMPILER_NAME)))
|
|
CFLAGS_O = -O2
|
|
ifeq (Darwin,$(OSTYPE))
|
|
NO_LTO = 1
|
|
endif
|
|
else
|
|
NO_LTO = 1
|
|
ifeq (Darwin,$(OSTYPE))
|
|
CFLAGS_O += -O4 -fno-strict-overflow -flto -fwhole-program
|
|
else
|
|
CFLAGS_O := -O2 -fno-strict-overflow
|
|
endif
|
|
endif
|
|
LDFLAGS_O =
|
|
GCC_MAJOR_VERSION = $(firstword $(subst ., ,$(GCC_VERSION)))
|
|
ifneq (3,$(GCC_MAJOR_VERSION))
|
|
ifeq (,$(GCC_OPTIMIZERS_CMD))
|
|
GCC_OPTIMIZERS_CMD = $(GCC) --help=optimizers
|
|
endif
|
|
GCC_OPTIMIZERS = $(shell $(GCC_OPTIMIZERS_CMD))
|
|
endif
|
|
ifneq (,$(findstring $(GCC_VERSION),$(LTO_EXCLUDE_VERSIONS)))
|
|
NO_LTO = 1
|
|
endif
|
|
ifneq (,$(findstring -finline-functions,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -finline-functions
|
|
endif
|
|
ifneq (,$(findstring -fgcse-after-reload,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -fgcse-after-reload
|
|
endif
|
|
ifneq (,$(findstring -fpredictive-commoning,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -fpredictive-commoning
|
|
endif
|
|
ifneq (,$(findstring -fipa-cp-clone,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -fipa-cp-clone
|
|
endif
|
|
ifneq (,$(findstring -funsafe-loop-optimizations,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -fno-unsafe-loop-optimizations
|
|
endif
|
|
ifneq (,$(findstring -fstrict-overflow,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -fno-strict-overflow
|
|
endif
|
|
ifeq (,$(NO_LTO))
|
|
ifneq (,$(findstring -flto,$(GCC_OPTIMIZERS)))
|
|
CFLAGS_O += -flto -fwhole-program
|
|
LDFLAGS_O += -flto -fwhole-program
|
|
endif
|
|
endif
|
|
BUILD_FEATURES = - compiler optimizations and no debugging support
|
|
endif
|
|
ifneq (3,$(GCC_MAJOR_VERSION))
|
|
ifeq (,$(GCC_WARNINGS_CMD))
|
|
GCC_WARNINGS_CMD = $(GCC) --help=warnings
|
|
endif
|
|
ifneq (,$(findstring -Wunused-result,$(shell $(GCC_WARNINGS_CMD))))
|
|
CFLAGS_O += -Wno-unused-result
|
|
endif
|
|
endif
|
|
ifneq (clean,$(MAKECMDGOALS))
|
|
BUILD_FEATURES := $(BUILD_FEATURES). $(COMPILER_NAME)
|
|
$(info ***)
|
|
$(info *** $(BUILD_SINGLE)Simulator$(BUILD_MULTIPLE) being built with:)
|
|
$(info *** $(BUILD_FEATURES).)
|
|
ifneq (,$(NETWORK_FEATURES))
|
|
$(info *** $(NETWORK_FEATURES).)
|
|
endif
|
|
ifneq (,$(NETWORK_LAN_FEATURES))
|
|
$(info *** - Local LAN packet transports: $(NETWORK_LAN_FEATURES))
|
|
endif
|
|
ifneq (,$(VIDEO_FEATURES))
|
|
$(info *** $(VIDEO_FEATURES).)
|
|
endif
|
|
ifneq (,$(GIT_COMMIT_ID))
|
|
$(info ***)
|
|
$(info *** git commit id is $(GIT_COMMIT_ID).)
|
|
endif
|
|
$(info ***)
|
|
endif
|
|
ifneq ($(DONT_USE_ROMS),)
|
|
ROMS_OPT = -DDONT_USE_INTERNAL_ROM
|
|
else
|
|
BUILD_ROMS = ${BIN}BuildROMs${EXE}
|
|
endif
|
|
ifneq ($(DONT_USE_READER_THREAD),)
|
|
NETWORK_OPT += -DDONT_USE_READER_THREAD
|
|
endif
|
|
|
|
CC_OUTSPEC = -o $@
|
|
CC := $(GCC) $(CC_STD) -U__STRICT_ANSI__ $(CFLAGS_G) $(CFLAGS_O) $(CFLAGS_GIT) -DSIM_COMPILER="$(COMPILER_NAME)" -I . $(OS_CCDEFS) $(ROMS_OPT)
|
|
LDFLAGS := $(OS_LDFLAGS) $(NETWORK_LDFLAGS) $(LDFLAGS_O)
|
|
|
|
#
|
|
# Common Libraries
|
|
#
|
|
BIN = BIN/
|
|
SIM = scp.c sim_console.c sim_fio.c sim_timer.c sim_sock.c \
|
|
sim_tmxr.c sim_ether.c sim_tape.c sim_disk.c sim_serial.c \
|
|
sim_video.c sim_imd.c sim_card.c
|
|
|
|
DISPLAYD = display
|
|
|
|
#
|
|
# Emulator source files and compile time options
|
|
#
|
|
PDP1D = PDP1
|
|
ifneq (,$(DISPLAY_OPT))
|
|
PDP1_DISPLAY_OPT = -DDISPLAY_TYPE=DIS_TYPE30 -DPIX_SCALE=RES_HALF
|
|
endif
|
|
PDP1 = ${PDP1D}/pdp1_lp.c ${PDP1D}/pdp1_cpu.c ${PDP1D}/pdp1_stddev.c \
|
|
${PDP1D}/pdp1_sys.c ${PDP1D}/pdp1_dt.c ${PDP1D}/pdp1_drm.c \
|
|
${PDP1D}/pdp1_clk.c ${PDP1D}/pdp1_dcs.c ${PDP1D}/pdp1_dpy.c ${DISPLAYL}
|
|
PDP1_OPT = -I ${PDP1D} $(DISPLAY_OPT) $(PDP1_DISPLAY_OPT)
|
|
|
|
|
|
NOVAD = NOVA
|
|
NOVA = ${NOVAD}/nova_sys.c ${NOVAD}/nova_cpu.c ${NOVAD}/nova_dkp.c \
|
|
${NOVAD}/nova_dsk.c ${NOVAD}/nova_lp.c ${NOVAD}/nova_mta.c \
|
|
${NOVAD}/nova_plt.c ${NOVAD}/nova_pt.c ${NOVAD}/nova_clk.c \
|
|
${NOVAD}/nova_tt.c ${NOVAD}/nova_tt1.c ${NOVAD}/nova_qty.c
|
|
NOVA_OPT = -I ${NOVAD}
|
|
|
|
|
|
ECLIPSE = ${NOVAD}/eclipse_cpu.c ${NOVAD}/eclipse_tt.c ${NOVAD}/nova_sys.c \
|
|
${NOVAD}/nova_dkp.c ${NOVAD}/nova_dsk.c ${NOVAD}/nova_lp.c \
|
|
${NOVAD}/nova_mta.c ${NOVAD}/nova_plt.c ${NOVAD}/nova_pt.c \
|
|
${NOVAD}/nova_clk.c ${NOVAD}/nova_tt1.c ${NOVAD}/nova_qty.c
|
|
ECLIPSE_OPT = -I ${NOVAD} -DECLIPSE
|
|
|
|
|
|
PDP18BD = PDP18B
|
|
PDP18B = ${PDP18BD}/pdp18b_dt.c ${PDP18BD}/pdp18b_drm.c ${PDP18BD}/pdp18b_cpu.c \
|
|
${PDP18BD}/pdp18b_lp.c ${PDP18BD}/pdp18b_mt.c ${PDP18BD}/pdp18b_rf.c \
|
|
${PDP18BD}/pdp18b_rp.c ${PDP18BD}/pdp18b_stddev.c ${PDP18BD}/pdp18b_sys.c \
|
|
${PDP18BD}/pdp18b_rb.c ${PDP18BD}/pdp18b_tt1.c ${PDP18BD}/pdp18b_fpp.c \
|
|
${PDP18BD}/pdp18b_g2tty.c
|
|
|
|
PDP4_OPT = -DPDP4 -I ${PDP18BD}
|
|
PDP7_OPT = -DPDP7 -I ${PDP18BD}
|
|
PDP9_OPT = -DPDP9 -I ${PDP18BD}
|
|
PDP15_OPT = -DPDP15 -I ${PDP18BD}
|
|
|
|
|
|
PDP11D = PDP11
|
|
PDP11 = ${PDP11D}/pdp11_fp.c ${PDP11D}/pdp11_cpu.c ${PDP11D}/pdp11_dz.c \
|
|
${PDP11D}/pdp11_cis.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_rk.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rp.c ${PDP11D}/pdp11_rx.c \
|
|
${PDP11D}/pdp11_stddev.c ${PDP11D}/pdp11_sys.c ${PDP11D}/pdp11_tc.c \
|
|
${PDP11D}/pdp11_tm.c ${PDP11D}/pdp11_ts.c ${PDP11D}/pdp11_io.c \
|
|
${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_tq.c ${PDP11D}/pdp11_pclk.c \
|
|
${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_pt.c ${PDP11D}/pdp11_hk.c \
|
|
${PDP11D}/pdp11_xq.c ${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_vh.c \
|
|
${PDP11D}/pdp11_rh.c ${PDP11D}/pdp11_tu.c ${PDP11D}/pdp11_cpumod.c \
|
|
${PDP11D}/pdp11_cr.c ${PDP11D}/pdp11_rf.c ${PDP11D}/pdp11_dl.c \
|
|
${PDP11D}/pdp11_ta.c ${PDP11D}/pdp11_rc.c ${PDP11D}/pdp11_kg.c \
|
|
${PDP11D}/pdp11_ke.c ${PDP11D}/pdp11_dc.c ${PDP11D}/pdp11_dmc.c \
|
|
${PDP11D}/pdp11_kmc.c ${PDP11D}/pdp11_dup.c ${PDP11D}/pdp11_rs.c \
|
|
${PDP11D}/pdp11_vt.c ${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_io_lib.c $(DISPLAYL) $(DISPLAYVT)
|
|
PDP11_OPT = -DVM_PDP11 -I ${PDP11D} ${NETWORK_OPT} $(DISPLAY_OPT)
|
|
|
|
|
|
VAXD = VAX
|
|
VAX = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c ${VAXD}/vax_io.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_stddev.c ${VAXD}/vax_sysdev.c \
|
|
${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c ${VAXD}/vax_syslist.c \
|
|
${VAXD}/vax_vc.c ${VAXD}/vax_lk.c ${VAXD}/vax_vs.c ${VAXD}/vax_2681.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xq.c ${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_io_lib.c
|
|
VAX_OPT = -DVM_VAX -DUSE_INT64 -DUSE_ADDR64 -DUSE_SIM_VIDEO -I ${VAXD} -I ${PDP11D} ${NETWORK_OPT} ${VIDEO_CCDEFS} ${VIDEO_LDFLAGS}
|
|
|
|
|
|
VAX610 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
|
|
${VAXD}/vax610_stddev.c ${VAXD}/vax610_sysdev.c ${VAXD}/vax610_io.c \
|
|
${VAXD}/vax610_syslist.c ${VAXD}/vax610_mem.c ${VAXD}/vax_vc.c \
|
|
${VAXD}/vax_lk.c ${VAXD}/vax_vs.c ${VAXD}/vax_2681.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xq.c ${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_io_lib.c
|
|
VAX610_OPT = -DVM_VAX -DVAX_610 -DUSE_INT64 -DUSE_ADDR64 -DUSE_SIM_VIDEO -I ${VAXD} -I ${PDP11D} ${NETWORK_OPT} ${VIDEO_CCDEFS} ${VIDEO_LDFLAGS}
|
|
|
|
VAX630 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
|
|
${VAXD}/vax_watch.c ${VAXD}/vax630_stddev.c ${VAXD}/vax630_sysdev.c \
|
|
${VAXD}/vax630_io.c ${VAXD}/vax630_syslist.c ${VAXD}/vax_vc.c \
|
|
${VAXD}/vax_lk.c ${VAXD}/vax_vs.c ${VAXD}/vax_2681.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xq.c ${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_io_lib.c
|
|
VAX620_OPT = -DVM_VAX -DVAX_620 -DUSE_INT64 -DUSE_ADDR64 -I ${VAXD} -I ${PDP11D} ${NETWORK_OPT}
|
|
VAX630_OPT = -DVM_VAX -DVAX_630 -DUSE_INT64 -DUSE_ADDR64 -DUSE_SIM_VIDEO -I ${VAXD} -I ${PDP11D} ${NETWORK_OPT} ${VIDEO_CCDEFS} ${VIDEO_LDFLAGS}
|
|
|
|
|
|
VAX730 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
|
|
${VAXD}/vax730_stddev.c ${VAXD}/vax730_sys.c \
|
|
${VAXD}/vax730_mem.c ${VAXD}/vax730_uba.c ${VAXD}/vax730_rb.c \
|
|
${VAXD}/vax730_syslist.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_hk.c ${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_dmc.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_tc.c ${PDP11D}/pdp11_rk.c \
|
|
${PDP11D}/pdp11_io_lib.c
|
|
VAX730_OPT = -DVM_VAX -DVAX_730 -DUSE_INT64 -DUSE_ADDR64 -I VAX -I ${PDP11D} ${NETWORK_OPT}
|
|
|
|
|
|
VAX750 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
|
|
${VAXD}/vax750_stddev.c ${VAXD}/vax750_cmi.c \
|
|
${VAXD}/vax750_mem.c ${VAXD}/vax750_uba.c ${VAXD}/vax7x0_mba.c \
|
|
${VAXD}/vax750_syslist.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_hk.c ${PDP11D}/pdp11_rp.c ${PDP11D}/pdp11_tu.c \
|
|
${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_dmc.c ${PDP11D}/pdp11_dup.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_tc.c ${PDP11D}/pdp11_rk.c \
|
|
${PDP11D}/pdp11_io_lib.c
|
|
VAX750_OPT = -DVM_VAX -DVAX_750 -DUSE_INT64 -DUSE_ADDR64 -I VAX -I ${PDP11D} ${NETWORK_OPT}
|
|
|
|
|
|
VAX780 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
|
|
${VAXD}/vax780_stddev.c ${VAXD}/vax780_sbi.c \
|
|
${VAXD}/vax780_mem.c ${VAXD}/vax780_uba.c ${VAXD}/vax7x0_mba.c \
|
|
${VAXD}/vax780_fload.c ${VAXD}/vax780_syslist.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_rp.c ${PDP11D}/pdp11_tu.c ${PDP11D}/pdp11_hk.c \
|
|
${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_dmc.c ${PDP11D}/pdp11_dup.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_tc.c ${PDP11D}/pdp11_rk.c \
|
|
${PDP11D}/pdp11_io_lib.c
|
|
VAX780_OPT = -DVM_VAX -DVAX_780 -DUSE_INT64 -DUSE_ADDR64 -I VAX -I ${PDP11D} ${NETWORK_OPT}
|
|
|
|
|
|
VAX8600 = ${VAXD}/vax_cpu.c ${VAXD}/vax_cpu1.c ${VAXD}/vax_fpa.c \
|
|
${VAXD}/vax_cis.c ${VAXD}/vax_octa.c ${VAXD}/vax_cmode.c \
|
|
${VAXD}/vax_mmu.c ${VAXD}/vax_sys.c ${VAXD}/vax_syscm.c \
|
|
${VAXD}/vax860_stddev.c ${VAXD}/vax860_sbia.c \
|
|
${VAXD}/vax860_abus.c ${VAXD}/vax780_uba.c ${VAXD}/vax7x0_mba.c \
|
|
${VAXD}/vax860_syslist.c \
|
|
${PDP11D}/pdp11_rl.c ${PDP11D}/pdp11_rq.c ${PDP11D}/pdp11_ts.c \
|
|
${PDP11D}/pdp11_dz.c ${PDP11D}/pdp11_lp.c ${PDP11D}/pdp11_tq.c \
|
|
${PDP11D}/pdp11_xu.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_rp.c ${PDP11D}/pdp11_tu.c ${PDP11D}/pdp11_hk.c \
|
|
${PDP11D}/pdp11_vh.c ${PDP11D}/pdp11_dmc.c ${PDP11D}/pdp11_dup.c \
|
|
${PDP11D}/pdp11_td.c ${PDP11D}/pdp11_tc.c ${PDP11D}/pdp11_rk.c \
|
|
${PDP11D}/pdp11_io_lib.c
|
|
VAX8600_OPT = -DVM_VAX -DVAX_860 -DUSE_INT64 -DUSE_ADDR64 -I VAX -I ${PDP11D} ${NETWORK_OPT}
|
|
|
|
|
|
PDP10D = PDP10
|
|
PDP10 = ${PDP10D}/pdp10_fe.c ${PDP11D}/pdp11_dz.c ${PDP10D}/pdp10_cpu.c \
|
|
${PDP10D}/pdp10_ksio.c ${PDP10D}/pdp10_lp20.c ${PDP10D}/pdp10_mdfp.c \
|
|
${PDP10D}/pdp10_pag.c ${PDP10D}/pdp10_rp.c ${PDP10D}/pdp10_sys.c \
|
|
${PDP10D}/pdp10_tim.c ${PDP10D}/pdp10_tu.c ${PDP10D}/pdp10_xtnd.c \
|
|
${PDP11D}/pdp11_pt.c ${PDP11D}/pdp11_ry.c ${PDP11D}/pdp11_cr.c \
|
|
${PDP11D}/pdp11_dup.c ${PDP11D}/pdp11_dmc.c ${PDP11D}/pdp11_kmc.c \
|
|
${PDP11D}/pdp11_xu.c
|
|
PDP10_OPT = -DVM_PDP10 -DUSE_INT64 -I ${PDP10D} -I ${PDP11D} ${NETWORK_OPT}
|
|
|
|
|
|
PDP8D = PDP8
|
|
PDP8 = ${PDP8D}/pdp8_cpu.c ${PDP8D}/pdp8_clk.c ${PDP8D}/pdp8_df.c \
|
|
${PDP8D}/pdp8_dt.c ${PDP8D}/pdp8_lp.c ${PDP8D}/pdp8_mt.c \
|
|
${PDP8D}/pdp8_pt.c ${PDP8D}/pdp8_rf.c ${PDP8D}/pdp8_rk.c \
|
|
${PDP8D}/pdp8_rx.c ${PDP8D}/pdp8_sys.c ${PDP8D}/pdp8_tt.c \
|
|
${PDP8D}/pdp8_ttx.c ${PDP8D}/pdp8_rl.c ${PDP8D}/pdp8_tsc.c \
|
|
${PDP8D}/pdp8_td.c ${PDP8D}/pdp8_ct.c ${PDP8D}/pdp8_fpp.c
|
|
PDP8_OPT = -I ${PDP8D}
|
|
|
|
|
|
H316D = H316
|
|
H316 = ${H316D}/h316_stddev.c ${H316D}/h316_lp.c ${H316D}/h316_cpu.c \
|
|
${H316D}/h316_sys.c ${H316D}/h316_mt.c ${H316D}/h316_fhd.c \
|
|
${H316D}/h316_dp.c ${H316D}/h316_rtc.c ${H316D}/h316_imp.c \
|
|
${H316D}/h316_hi.c ${H316D}/h316_mi.c ${H316D}/h316_udp.c
|
|
H316_OPT = -I ${H316D} -D VM_IMPTIP
|
|
|
|
|
|
HP2100D = HP2100
|
|
HP2100 = ${HP2100D}/hp2100_stddev.c ${HP2100D}/hp2100_dp.c ${HP2100D}/hp2100_dq.c \
|
|
${HP2100D}/hp2100_dr.c ${HP2100D}/hp2100_lps.c ${HP2100D}/hp2100_ms.c \
|
|
${HP2100D}/hp2100_mt.c ${HP2100D}/hp2100_mux.c ${HP2100D}/hp2100_cpu.c \
|
|
${HP2100D}/hp2100_fp.c ${HP2100D}/hp2100_sys.c ${HP2100D}/hp2100_lpt.c \
|
|
${HP2100D}/hp2100_ipl.c ${HP2100D}/hp2100_ds.c ${HP2100D}/hp2100_cpu0.c \
|
|
${HP2100D}/hp2100_cpu1.c ${HP2100D}/hp2100_cpu2.c ${HP2100D}/hp2100_cpu3.c \
|
|
${HP2100D}/hp2100_cpu4.c ${HP2100D}/hp2100_cpu5.c ${HP2100D}/hp2100_cpu6.c \
|
|
${HP2100D}/hp2100_cpu7.c ${HP2100D}/hp2100_fp1.c ${HP2100D}/hp2100_baci.c \
|
|
${HP2100D}/hp2100_mpx.c ${HP2100D}/hp2100_pif.c ${HP2100D}/hp2100_di.c \
|
|
${HP2100D}/hp2100_di_da.c ${HP2100D}/hp2100_disclib.c
|
|
HP2100_OPT = -DHAVE_INT64 -I ${HP2100D}
|
|
|
|
HP3000D = HP3000
|
|
HP3000 = ${HP3000D}/hp_disclib.c ${HP3000D}/hp_tapelib.c ${HP3000D}/hp3000_atc.c \
|
|
${HP3000D}/hp3000_clk.c ${HP3000D}/hp3000_cpu.c ${HP3000D}/hp3000_cpu_base.c \
|
|
${HP3000D}/hp3000_cpu_fp.c ${HP3000D}/hp3000_ds.c ${HP3000D}/hp3000_iop.c \
|
|
${HP3000D}/hp3000_lp.c ${HP3000D}/hp3000_mpx.c ${HP3000D}/hp3000_ms.c \
|
|
${HP3000D}/hp3000_scmb.c ${HP3000D}/hp3000_sel.c ${HP3000D}/hp3000_sys.c
|
|
HP3000_OPT = -I ${HP3000D}
|
|
|
|
|
|
I1401D = I1401
|
|
I1401 = ${I1401D}/i1401_lp.c ${I1401D}/i1401_cpu.c ${I1401D}/i1401_iq.c \
|
|
${I1401D}/i1401_cd.c ${I1401D}/i1401_mt.c ${I1401D}/i1401_dp.c \
|
|
${I1401D}/i1401_sys.c
|
|
I1401_OPT = -I ${I1401D}
|
|
|
|
|
|
I1620D = I1620
|
|
I1620 = ${I1620D}/i1620_cd.c ${I1620D}/i1620_dp.c ${I1620D}/i1620_pt.c \
|
|
${I1620D}/i1620_tty.c ${I1620D}/i1620_cpu.c ${I1620D}/i1620_lp.c \
|
|
${I1620D}/i1620_fp.c ${I1620D}/i1620_sys.c
|
|
I1620_OPT = -I ${I1620D}
|
|
|
|
|
|
I7094D = I7094
|
|
I7094 = ${I7094D}/i7094_cpu.c ${I7094D}/i7094_cpu1.c ${I7094D}/i7094_io.c \
|
|
${I7094D}/i7094_cd.c ${I7094D}/i7094_clk.c ${I7094D}/i7094_com.c \
|
|
${I7094D}/i7094_drm.c ${I7094D}/i7094_dsk.c ${I7094D}/i7094_sys.c \
|
|
${I7094D}/i7094_lp.c ${I7094D}/i7094_mt.c ${I7094D}/i7094_binloader.c
|
|
I7094_OPT = -DUSE_INT64 -I ${I7094D}
|
|
|
|
|
|
IBM1130D = Ibm1130
|
|
IBM1130 = ${IBM1130D}/ibm1130_cpu.c ${IBM1130D}/ibm1130_cr.c \
|
|
${IBM1130D}/ibm1130_disk.c ${IBM1130D}/ibm1130_stddev.c \
|
|
${IBM1130D}/ibm1130_sys.c ${IBM1130D}/ibm1130_gdu.c \
|
|
${IBM1130D}/ibm1130_gui.c ${IBM1130D}/ibm1130_prt.c \
|
|
${IBM1130D}/ibm1130_fmt.c ${IBM1130D}/ibm1130_ptrp.c \
|
|
${IBM1130D}/ibm1130_plot.c ${IBM1130D}/ibm1130_sca.c \
|
|
${IBM1130D}/ibm1130_t2741.c
|
|
IBM1130_OPT = -I ${IBM1130D}
|
|
ifneq ($(WIN32),)
|
|
IBM1130_OPT += -DGUI_SUPPORT -lgdi32
|
|
endif
|
|
|
|
|
|
ID16D = Interdata
|
|
ID16 = ${ID16D}/id16_cpu.c ${ID16D}/id16_sys.c ${ID16D}/id_dp.c \
|
|
${ID16D}/id_fd.c ${ID16D}/id_fp.c ${ID16D}/id_idc.c ${ID16D}/id_io.c \
|
|
${ID16D}/id_lp.c ${ID16D}/id_mt.c ${ID16D}/id_pas.c ${ID16D}/id_pt.c \
|
|
${ID16D}/id_tt.c ${ID16D}/id_uvc.c ${ID16D}/id16_dboot.c ${ID16D}/id_ttp.c
|
|
ID16_OPT = -I ${ID16D}
|
|
|
|
|
|
ID32D = Interdata
|
|
ID32 = ${ID32D}/id32_cpu.c ${ID32D}/id32_sys.c ${ID32D}/id_dp.c \
|
|
${ID32D}/id_fd.c ${ID32D}/id_fp.c ${ID32D}/id_idc.c ${ID32D}/id_io.c \
|
|
${ID32D}/id_lp.c ${ID32D}/id_mt.c ${ID32D}/id_pas.c ${ID32D}/id_pt.c \
|
|
${ID32D}/id_tt.c ${ID32D}/id_uvc.c ${ID32D}/id32_dboot.c ${ID32D}/id_ttp.c
|
|
ID32_OPT = -I ${ID32D}
|
|
|
|
|
|
S3D = S3
|
|
S3 = ${S3D}/s3_cd.c ${S3D}/s3_cpu.c ${S3D}/s3_disk.c ${S3D}/s3_lp.c \
|
|
${S3D}/s3_pkb.c ${S3D}/s3_sys.c
|
|
S3_OPT = -I ${S3D}
|
|
|
|
|
|
ALTAIRD = ALTAIR
|
|
ALTAIR = ${ALTAIRD}/altair_sio.c ${ALTAIRD}/altair_cpu.c ${ALTAIRD}/altair_dsk.c \
|
|
${ALTAIRD}/altair_sys.c
|
|
ALTAIR_OPT = -I ${ALTAIRD}
|
|
|
|
|
|
ALTAIRZ80D = AltairZ80
|
|
ALTAIRZ80 = ${ALTAIRZ80D}/altairz80_cpu.c ${ALTAIRZ80D}/altairz80_cpu_nommu.c \
|
|
${ALTAIRZ80D}/altairz80_dsk.c ${ALTAIRZ80D}/disasm.c \
|
|
${ALTAIRZ80D}/altairz80_sio.c ${ALTAIRZ80D}/altairz80_sys.c \
|
|
${ALTAIRZ80D}/altairz80_hdsk.c ${ALTAIRZ80D}/altairz80_net.c \
|
|
${ALTAIRZ80D}/flashwriter2.c ${ALTAIRZ80D}/i86_decode.c \
|
|
${ALTAIRZ80D}/i86_ops.c ${ALTAIRZ80D}/i86_prim_ops.c \
|
|
${ALTAIRZ80D}/i8272.c ${ALTAIRZ80D}/insnsd.c ${ALTAIRZ80D}/altairz80_mhdsk.c \
|
|
${ALTAIRZ80D}/mfdc.c ${ALTAIRZ80D}/n8vem.c ${ALTAIRZ80D}/vfdhd.c \
|
|
${ALTAIRZ80D}/s100_disk1a.c ${ALTAIRZ80D}/s100_disk2.c ${ALTAIRZ80D}/s100_disk3.c \
|
|
${ALTAIRZ80D}/s100_fif.c ${ALTAIRZ80D}/s100_mdriveh.c \
|
|
${ALTAIRZ80D}/s100_mdsa.c \
|
|
${ALTAIRZ80D}/s100_mdsad.c ${ALTAIRZ80D}/s100_selchan.c \
|
|
${ALTAIRZ80D}/s100_ss1.c ${ALTAIRZ80D}/s100_64fdc.c \
|
|
${ALTAIRZ80D}/s100_scp300f.c \
|
|
${ALTAIRZ80D}/wd179x.c ${ALTAIRZ80D}/s100_hdc1001.c \
|
|
${ALTAIRZ80D}/s100_if3.c ${ALTAIRZ80D}/s100_adcs6.c \
|
|
${ALTAIRZ80D}/m68kcpu.c ${ALTAIRZ80D}/m68kdasm.c \
|
|
${ALTAIRZ80D}/m68kopac.c ${ALTAIRZ80D}/m68kopdm.c \
|
|
${ALTAIRZ80D}/m68kopnz.c ${ALTAIRZ80D}/m68kops.c ${ALTAIRZ80D}/m68ksim.c
|
|
ALTAIRZ80_OPT = -I ${ALTAIRZ80D} -DUSE_SIM_IMD
|
|
|
|
|
|
GRID = GRI
|
|
GRI = ${GRID}/gri_cpu.c ${GRID}/gri_stddev.c ${GRID}/gri_sys.c
|
|
GRI_OPT = -I ${GRID}
|
|
|
|
|
|
LGPD = LGP
|
|
LGP = ${LGPD}/lgp_cpu.c ${LGPD}/lgp_stddev.c ${LGPD}/lgp_sys.c
|
|
LGP_OPT = -I ${LGPD}
|
|
|
|
|
|
SDSD = SDS
|
|
SDS = ${SDSD}/sds_cpu.c ${SDSD}/sds_drm.c ${SDSD}/sds_dsk.c ${SDSD}/sds_io.c \
|
|
${SDSD}/sds_lp.c ${SDSD}/sds_mt.c ${SDSD}/sds_mux.c ${SDSD}/sds_rad.c \
|
|
${SDSD}/sds_stddev.c ${SDSD}/sds_sys.c
|
|
SDS_OPT = -I ${SDSD}
|
|
|
|
|
|
SWTP6800D = swtp6800/swtp6800
|
|
SWTP6800C = swtp6800/common
|
|
SWTP6800MP-A = ${SWTP6800C}/mp-a.c ${SWTP6800C}/m6800.c ${SWTP6800C}/m6810.c \
|
|
${SWTP6800C}/bootrom.c ${SWTP6800C}/dc-4.c ${SWTP6800C}/mp-s.c ${SWTP6800D}/mp-a_sys.c \
|
|
${SWTP6800C}/mp-b2.c ${SWTP6800C}/mp-8m.c
|
|
SWTP6800MP-A2 = ${SWTP6800C}/mp-a2.c ${SWTP6800C}/m6800.c ${SWTP6800C}/m6810.c \
|
|
${SWTP6800C}/bootrom.c ${SWTP6800C}/dc-4.c ${SWTP6800C}/mp-s.c ${SWTP6800D}/mp-a2_sys.c \
|
|
${SWTP6800C}/mp-b2.c ${SWTP6800C}/mp-8m.c ${SWTP6800C}/i2716.c
|
|
SWTP6800_OPT = -I ${SWTP6800D}
|
|
|
|
|
|
ISYS8010D = Intel-Systems/isys8010
|
|
ISYS8010C = Intel-Systems/common
|
|
ISYS8010 = ${ISYS8010C}/i8080.c ${ISYS8010D}/isys8010_sys.c \
|
|
${ISYS8010C}/i8251.c ${ISYS8010C}/i8255.c \
|
|
${ISYS8010C}/ieprom.c ${ISYS8010C}/iram8.c \
|
|
${ISYS8010C}/multibus.c ${ISYS8010C}/isbc80-10.c \
|
|
${ISYS8010C}/isbc064.c ${ISYS8010C}/isbc208.c
|
|
ISYS8010_OPT = -I ${ISYS8010D}
|
|
|
|
|
|
ISYS8020D = Intel-Systems/isys8020
|
|
ISYS8020C = Intel-Systems/common
|
|
ISYS8020 = ${ISYS8020C}/i8080.c ${ISYS8020D}/isys8020_sys.c \
|
|
${ISYS8020C}/i8251.c ${ISYS8020C}/i8255.c \
|
|
${ISYS8020C}/ieprom.c ${ISYS8020C}/iram8.c \
|
|
${ISYS8020C}/multibus.c ${ISYS8020C}/isbc80-20.c \
|
|
${ISYS8020C}/isbc064.c ${ISYS8020C}/isbc208.c \
|
|
${ISYS8020C}/i8259.c
|
|
ISYS8020_OPT = -I ${ISYS8020D}
|
|
|
|
|
|
TX0D = TX-0
|
|
TX0 = ${TX0D}/tx0_cpu.c ${TX0D}/tx0_dpy.c ${TX0D}/tx0_stddev.c \
|
|
${TX0D}/tx0_sys.c ${TX0D}/tx0_sys_orig.c ${DISPLAYL}
|
|
TX0_OPT = -I ${TX0D} $(DISPLAY_OPT)
|
|
|
|
|
|
SSEMD = SSEM
|
|
SSEM = ${SSEMD}/ssem_cpu.c ${SSEMD}/ssem_sys.c
|
|
SSEM_OPT = -I ${SSEMD}
|
|
|
|
B5500D = B5500
|
|
B5500 = ${B5500D}/b5500_cpu.c ${B5500D}/b5500_io.c ${B5500D}/b5500_sys.c \
|
|
${B5500D}/b5500_dk.c ${B5500D}/b5500_mt.c ${B5500D}/b5500_urec.c \
|
|
${B5500D}/b5500_dr.c ${B5500D}/b5500_dtc.c
|
|
B5500_OPT = -I.. -DUSE_INT64 -DB5500 -DUSE_SIM_CARD
|
|
|
|
###
|
|
### Experimental simulators
|
|
###
|
|
|
|
BESM6D = BESM6
|
|
BESM6 = ${BESM6D}/besm6_cpu.c ${BESM6D}/besm6_sys.c ${BESM6D}/besm6_mmu.c \
|
|
${BESM6D}/besm6_arith.c ${BESM6D}/besm6_disk.c ${BESM6D}/besm6_drum.c \
|
|
${BESM6D}/besm6_tty.c ${BESM6D}/besm6_panel.c ${BESM6D}/besm6_printer.c \
|
|
${BESM6D}/besm6_punch.c
|
|
|
|
ifneq (,$(and ${VIDEO_LDFLAGS}, $(BESM6_BUILD)))
|
|
ifeq (,${FONTFILE})
|
|
FONTPATH += /usr/share/fonts /Library/Fonts /usr/lib/jvm /System/Library/Frameworks/JavaVM.framework/Versions C:/Windows/Fonts
|
|
FONTPATH := $(dir $(foreach dir,$(strip $(FONTPATH)),$(wildcard $(dir)/.)))
|
|
FONTNAME += DejaVuSans.ttf LucidaSansRegular.ttf FreeSans.ttf AppleGothic.ttf tahoma.ttf
|
|
$(info font paths are: $(FONTPATH))
|
|
$(info font names are: $(FONTNAME))
|
|
find_fontfile = $(strip $(firstword $(foreach dir,$(strip $(FONTPATH)),$(wildcard $(dir)/$(1))$(wildcard $(dir)/*/$(1))$(wildcard $(dir)/*/*/$(1))$(wildcard $(dir)/*/*/*/$(1)))))
|
|
find_font = $(abspath $(strip $(firstword $(foreach font,$(strip $(FONTNAME)),$(call find_fontfile,$(font))))))
|
|
ifneq (,$(call find_font))
|
|
FONTFILE=$(call find_font)
|
|
else
|
|
$(info ***)
|
|
$(info *** No font file available, BESM-6 video panel disabled.)
|
|
$(info ***)
|
|
$(info *** To enable the panel display please specify one of:)
|
|
$(info *** a font path with FONTNAME=path)
|
|
$(info *** a font name with FONTNAME=fontname.ttf)
|
|
$(info *** a font file with FONTFILE=path/fontname.ttf)
|
|
$(info ***)
|
|
endif
|
|
endif
|
|
endif
|
|
ifeq (,$(and ${VIDEO_LDFLAGS}, ${FONTFILE}))
|
|
BESM6_OPT = -I ${BESM6D} -DUSE_INT64
|
|
else ifneq (,$(and $(findstring SDL2,${VIDEO_LDFLAGS}),$(call find_include,SDL2/SDL_ttf),$(call find_lib,SDL2_ttf)))
|
|
$(info using libSDL2_ttf: $(call find_lib,SDL2_ttf) $(call find_include,SDL2/SDL_ttf))
|
|
$(info ***)
|
|
BESM6_OPT = -I ${BESM6D} -DFONTFILE=${FONTFILE} -DUSE_INT64 ${VIDEO_CCDEFS} ${VIDEO_LDFLAGS} -lSDL2_ttf
|
|
else ifneq (,$(and $(call find_include,SDL/SDL_ttf),$(call find_lib,SDL_ttf)))
|
|
$(info using libSDL_ttf: $(call find_lib,SDL_ttf) $(call find_include,SDL/SDL_ttf))
|
|
$(info ***)
|
|
BESM6_OPT = -I ${BESM6D} -DFONTFILE=${FONTFILE} -DUSE_INT64 ${VIDEO_CCDEFS} ${VIDEO_LDFLAGS} -lSDL_ttf
|
|
else
|
|
BESM6_OPT = -I ${BESM6D} -DUSE_INT64
|
|
endif
|
|
|
|
###
|
|
### Unsupported/Incomplete simulators
|
|
###
|
|
|
|
SIGMAD = sigma
|
|
SIGMA = ${SIGMAD}/sigma_cpu.c ${SIGMAD}/sigma_sys.c ${SIGMAD}/sigma_cis.c \
|
|
${SIGMAD}/sigma_coc.c ${SIGMAD}/sigma_dk.c ${SIGMAD}/sigma_dp.c \
|
|
${SIGMAD}/sigma_fp.c ${SIGMAD}/sigma_io.c ${SIGMAD}/sigma_lp.c \
|
|
${SIGMAD}/sigma_map.c ${SIGMAD}/sigma_mt.c ${SIGMAD}/sigma_pt.c \
|
|
${SIGMAD}/sigma_rad.c ${SIGMAD}/sigma_rtc.c ${SIGMAD}/sigma_tt.c
|
|
SIGMA_OPT = -I ${SIGMAD}
|
|
|
|
ALPHAD = alpha
|
|
ALPHA = ${ALPHAD}/alpha_500au_syslist.c ${ALPHAD}/alpha_cpu.c \
|
|
${ALPHAD}/alpha_ev5_cons.c ${ALPHAD}/alpha_ev5_pal.c \
|
|
${ALPHAD}/alpha_ev5_tlb.c ${ALPHAD}/alpha_fpi.c \
|
|
${ALPHAD}/alpha_fpv.c ${ALPHAD}/alpha_io.c \
|
|
${ALPHAD}/alpha_mmu.c ${ALPHAD}/alpha_sys.c
|
|
ALPHA_OPT = -I ${ALPHAD} -DUSE_ADDR64 -DUSE_INT64
|
|
|
|
SAGED = SAGE
|
|
SAGE = ${SAGED}/sage_cpu.c ${SAGED}/sage_sys.c ${SAGED}/sage_stddev.c \
|
|
${SAGED}/sage_cons.c ${SAGED}/sage_fd.c ${SAGED}/sage_lp.c \
|
|
${SAGED}/m68k_cpu.c ${SAGED}/m68k_mem.c ${SAGED}/m68k_scp.c \
|
|
${SAGED}/m68k_parse.tab.c ${SAGED}/m68k_sys.c \
|
|
${SAGED}/i8251.c ${SAGED}/i8253.c ${SAGED}/i8255.c ${SAGED}/i8259.c ${SAGED}/i8272.c
|
|
SAGE_OPT = -I ${SAGED} -DHAVE_INT64 -DUSE_SIM_IMD
|
|
|
|
PDQ3D = PDQ-3
|
|
PDQ3 = ${PDQ3D}/pdq3_cpu.c ${PDQ3D}/pdq3_sys.c ${PDQ3D}/pdq3_stddev.c \
|
|
${PDQ3D}/pdq3_mem.c ${PDQ3D}/pdq3_debug.c ${PDQ3D}/pdq3_fdc.c
|
|
PDQ3_OPT = -I ${PDQ3D} -DUSE_SIM_IMD
|
|
|
|
|
|
#
|
|
# Build everything (not the unsupported/incomplete simulators)
|
|
#
|
|
ALL = pdp1 pdp4 pdp7 pdp8 pdp9 pdp15 pdp11 pdp10 \
|
|
vax microvax3900 microvax1 rtvax1000 microvax2 vax730 vax750 vax780 vax8600 \
|
|
nova eclipse hp2100 hp3000 i1401 i1620 s3 altair altairz80 gri \
|
|
i7094 ibm1130 id16 id32 sds lgp h316 \
|
|
swtp6800mp-a swtp6800mp-a2 tx-0 ssem isys8010 isys8020 \
|
|
b5500
|
|
|
|
all : ${ALL}
|
|
|
|
clean :
|
|
ifeq ($(WIN32),)
|
|
${RM} -r ${BIN}
|
|
else
|
|
if exist BIN\*.exe del /q BIN\*.exe
|
|
if exist BIN rmdir BIN
|
|
endif
|
|
|
|
${BIN}BuildROMs${EXE} :
|
|
${MKDIRBIN}
|
|
ifeq (agcc,$(findstring agcc,$(firstword $(CC))))
|
|
gcc $(wordlist 2,1000,${CC}) sim_BuildROMs.c $(CC_OUTSPEC)
|
|
else
|
|
${CC} sim_BuildROMs.c $(CC_OUTSPEC)
|
|
endif
|
|
ifeq ($(WIN32),)
|
|
$@
|
|
${RM} $@
|
|
ifeq (Darwin,$(OSTYPE)) # remove Xcode's debugging symbols folder too
|
|
${RM} -rf $@.dSYM
|
|
endif
|
|
else
|
|
$(@D)\$(@F)
|
|
del $(@D)\$(@F)
|
|
endif
|
|
|
|
#
|
|
# Individual builds
|
|
#
|
|
pdp1 : ${BIN}pdp1${EXE}
|
|
|
|
${BIN}pdp1${EXE} : ${PDP1} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP1} ${SIM} ${PDP1_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp4 : ${BIN}pdp4${EXE}
|
|
|
|
${BIN}pdp4${EXE} : ${PDP18B} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP18B} ${SIM} ${PDP4_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp7 : ${BIN}pdp7${EXE}
|
|
|
|
${BIN}pdp7${EXE} : ${PDP18B} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP18B} ${SIM} ${PDP7_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp8 : ${BIN}pdp8${EXE}
|
|
|
|
${BIN}pdp8${EXE} : ${PDP8} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP8} ${SIM} ${PDP8_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp9 : ${BIN}pdp9${EXE}
|
|
|
|
${BIN}pdp9${EXE} : ${PDP18B} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP18B} ${SIM} ${PDP9_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp15 : ${BIN}pdp15${EXE}
|
|
|
|
${BIN}pdp15${EXE} : ${PDP18B} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP18B} ${SIM} ${PDP15_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp10 : ${BIN}pdp10${EXE}
|
|
|
|
${BIN}pdp10${EXE} : ${PDP10} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP10} ${SIM} ${PDP10_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdp11 : ${BIN}BuildROMs${EXE} ${BIN}pdp11${EXE}
|
|
|
|
${BIN}pdp11${EXE} : ${PDP11} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDP11} ${SIM} ${PDP11_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
vax : microvax3900
|
|
|
|
microvax3900 : ${BIN}BuildROMs${EXE} ${BIN}microvax3900${EXE}
|
|
|
|
${BIN}microvax3900${EXE} : ${VAX} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX} ${SIM} ${VAX_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
ifeq ($(WIN32),)
|
|
cp ${BIN}microvax3900${EXE} ${BIN}vax${EXE}
|
|
else
|
|
copy $(@D)\microvax3900${EXE} $(@D)\vax${EXE}
|
|
endif
|
|
|
|
microvax1 : ${BIN}BuildROMs${EXE} ${BIN}microvax1${EXE}
|
|
|
|
${BIN}microvax1${EXE} : ${VAX610} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX610} ${SIM} ${VAX610_OPT} -o $@ ${LDFLAGS}
|
|
|
|
rtvax1000 : ${BIN}BuildROMs${EXE} ${BIN}rtvax1000${EXE}
|
|
|
|
${BIN}rtvax1000${EXE} : ${VAX630} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX630} ${SIM} ${VAX620_OPT} -o $@ ${LDFLAGS}
|
|
|
|
microvax2 : ${BIN}BuildROMs${EXE} ${BIN}microvax2${EXE}
|
|
|
|
${BIN}microvax2${EXE} : ${VAX630} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX630} ${SIM} ${VAX630_OPT} -o $@ ${LDFLAGS}
|
|
|
|
vax730 : ${BIN}BuildROMs${EXE} ${BIN}vax730${EXE}
|
|
|
|
${BIN}vax730${EXE} : ${VAX730} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX730} ${SIM} ${VAX730_OPT} -o $@ ${LDFLAGS}
|
|
|
|
vax750 : ${BIN}BuildROMs${EXE} ${BIN}vax750${EXE}
|
|
|
|
${BIN}vax750${EXE} : ${VAX750} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX750} ${SIM} ${VAX750_OPT} -o $@ ${LDFLAGS}
|
|
|
|
vax780 : ${BIN}BuildROMs${EXE} ${BIN}vax780${EXE}
|
|
|
|
${BIN}vax780${EXE} : ${VAX780} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX780} ${SIM} ${VAX780_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
vax8600 : ${BIN}BuildROMs${EXE} ${BIN}vax8600${EXE}
|
|
|
|
${BIN}vax8600${EXE} : ${VAX8600} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${VAX8600} ${SIM} ${VAX8600_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
nova : ${BIN}nova${EXE}
|
|
|
|
${BIN}nova${EXE} : ${NOVA} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${NOVA} ${SIM} ${NOVA_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
eclipse : ${BIN}eclipse${EXE}
|
|
|
|
${BIN}eclipse${EXE} : ${ECLIPSE} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${ECLIPSE} ${SIM} ${ECLIPSE_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
h316 : ${BIN}h316${EXE}
|
|
|
|
${BIN}h316${EXE} : ${H316} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${H316} ${SIM} ${H316_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
hp2100 : ${BIN}hp2100${EXE}
|
|
|
|
${BIN}hp2100${EXE} : ${HP2100} ${SIM}
|
|
ifneq (1,$(CPP_BUILD)$(CPP_FORCE))
|
|
${MKDIRBIN}
|
|
${CC} ${HP2100} ${SIM} ${HP2100_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
else
|
|
$(info hp2100 can't be built using C++)
|
|
endif
|
|
|
|
hp3000 : ${BIN}hp3000${EXE}
|
|
|
|
${BIN}hp3000${EXE} : ${HP3000} ${SIM}
|
|
ifneq (1,$(CPP_BUILD)$(CPP_FORCE))
|
|
${MKDIRBIN}
|
|
${CC} ${HP3000} ${SIM} ${HP3000_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
else
|
|
$(info hp3000 can't be built using C++)
|
|
endif
|
|
|
|
i1401 : ${BIN}i1401${EXE}
|
|
|
|
${BIN}i1401${EXE} : ${I1401} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${I1401} ${SIM} ${I1401_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
i1620 : ${BIN}i1620${EXE}
|
|
|
|
${BIN}i1620${EXE} : ${I1620} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${I1620} ${SIM} ${I1620_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
i7094 : ${BIN}i7094${EXE}
|
|
|
|
${BIN}i7094${EXE} : ${I7094} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${I7094} ${SIM} ${I7094_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
ibm1130 : ${BIN}ibm1130${EXE}
|
|
|
|
${BIN}ibm1130${EXE} : ${IBM1130}
|
|
ifneq (1,$(CPP_BUILD)$(CPP_FORCE))
|
|
${MKDIRBIN}
|
|
ifneq ($(WIN32),)
|
|
windres ${IBM1130D}/ibm1130.rc $(BIN)ibm1130.o
|
|
${CC} ${IBM1130} ${SIM} ${IBM1130_OPT} $(BIN)ibm1130.o $(CC_OUTSPEC) ${LDFLAGS}
|
|
del BIN\ibm1130.o
|
|
else
|
|
${CC} ${IBM1130} ${SIM} ${IBM1130_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
endif
|
|
else
|
|
$(info ibm1130 can't be built using C++)
|
|
endif
|
|
|
|
s3 : ${BIN}s3${EXE}
|
|
|
|
${BIN}s3${EXE} : ${S3} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${S3} ${SIM} ${S3_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
altair : ${BIN}altair${EXE}
|
|
|
|
${BIN}altair${EXE} : ${ALTAIR} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${ALTAIR} ${SIM} ${ALTAIR_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
altairz80 : ${BIN}altairz80${EXE}
|
|
|
|
${BIN}altairz80${EXE} : ${ALTAIRZ80} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${ALTAIRZ80} ${SIM} ${ALTAIRZ80_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
gri : ${BIN}gri${EXE}
|
|
|
|
${BIN}gri${EXE} : ${GRI} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${GRI} ${SIM} ${GRI_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
lgp : ${BIN}lgp${EXE}
|
|
|
|
${BIN}lgp${EXE} : ${LGP} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${LGP} ${SIM} ${LGP_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
id16 : ${BIN}id16${EXE}
|
|
|
|
${BIN}id16${EXE} : ${ID16} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${ID16} ${SIM} ${ID16_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
id32 : ${BIN}id32${EXE}
|
|
|
|
${BIN}id32${EXE} : ${ID32} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${ID32} ${SIM} ${ID32_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
sds : ${BIN}sds${EXE}
|
|
|
|
${BIN}sds${EXE} : ${SDS} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${SDS} ${SIM} ${SDS_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
swtp6800mp-a : ${BIN}BuildROMs${EXE} ${BIN}swtp6800mp-a${EXE}
|
|
|
|
${BIN}swtp6800mp-a${EXE} : ${SWTP6800MP-A} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${SWTP6800MP-A} ${SIM} ${SWTP6800_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
swtp6800mp-a2 : ${BIN}BuildROMs${EXE} ${BIN}swtp6800mp-a2${EXE}
|
|
|
|
${BIN}swtp6800mp-a2${EXE} : ${SWTP6800MP-A2} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${SWTP6800MP-A2} ${SIM} ${SWTP6800_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
|
|
isys8010: ${BIN}isys8010${EXE}
|
|
|
|
${BIN}isys8010${EXE} : ${ISYS8010} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${ISYS8010} ${SIM} ${ISYS8010_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
isys8020: ${BIN}isys8020${EXE}
|
|
|
|
${BIN}isys8020${EXE} : ${ISYS8020} ${SIM} ${BUILD_ROMS}
|
|
${MKDIRBIN}
|
|
${CC} ${ISYS8020} ${SIM} ${ISYS8020_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
tx-0 : ${BIN}tx-0${EXE}
|
|
|
|
${BIN}tx-0${EXE} : ${TX0} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${TX0} ${SIM} ${TX0_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
ssem : ${BIN}ssem${EXE}
|
|
|
|
${BIN}ssem${EXE} : ${SSEM} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${SSEM} ${SIM} ${SSEM_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
besm6 : ${BIN}besm6${EXE}
|
|
|
|
${BIN}besm6${EXE} : ${BESM6} ${SIM}
|
|
ifneq (1,$(CPP_BUILD)$(CPP_FORCE))
|
|
${MKDIRBIN}
|
|
${CC} ${BESM6} ${SIM} ${BESM6_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
else
|
|
$(info besm6 can't be built using C++)
|
|
endif
|
|
|
|
sigma : ${BIN}sigma${EXE}
|
|
|
|
${BIN}sigma${EXE} : ${SIGMA} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${SIGMA} ${SIM} ${SIGMA_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
alpha : ${BIN}alpha${EXE}
|
|
|
|
${BIN}alpha${EXE} : ${ALPHA} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${ALPHA} ${SIM} ${ALPHA_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
sage : ${BIN}sage${EXE}
|
|
|
|
${BIN}sage${EXE} : ${SAGE} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${SAGE} ${SIM} ${SAGE_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
pdq3 : ${BIN}pdq3${EXE}
|
|
|
|
${BIN}pdq3${EXE} : ${PDQ3} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${PDQ3} ${SIM} ${PDQ3_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
b5500 : $(BIN)b5500$(EXE)
|
|
|
|
${BIN}b5500${EXE} : ${B5500} ${SIM}
|
|
${MKDIRBIN}
|
|
${CC} ${B5500} ${SIM} ${B5500_OPT} $(CC_OUTSPEC) ${LDFLAGS}
|
|
|
|
# Front Panel API Demo/Test program
|
|
|
|
frontpaneltest : ${BIN}frontpaneltest${EXE}
|
|
|
|
${BIN}frontpaneltest${EXE} : frontpanel/FrontPanelTest.c sim_sock.c sim_frontpanel.c
|
|
${MKDIRBIN}
|
|
${CC} frontpanel/FrontPanelTest.c sim_sock.c sim_frontpanel.c $(CC_OUTSPEC) ${LDFLAGS}
|
|
|