folkert/simh-testsetgenerator
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
simh-testsetgenerator/Ibm1130/ibm1130.mak
Bob Supnik df6475181c Notes For V2.9-11 
1. New Features

1.1 GRI-909

- This is a new simulator for the GRI-909.
- It has been hand-tested; so far, no software has been discovered.

1.2 VAX

- SET CPU CONHALT will cause a HALT instruction to return to the
  boot ROM console rather than to SIMH.  SET CPU SIMHALT restores
  the default behavior.
- BRB/W self at IPL 1F stops the simulator.  This is the default
  behavior of VMS at exit.

1.3 PDP-18b

- ATTACH -A PTR/PTP attaches the reader and punch in ASCII mode.
  In ASCII mode, the reader automatically sets the high order bit
  of incoming alphabetic data, and the punch clears the high order
  bit of outgoing data.

1.4 SCP

- DO -V echoes commands from the file as they are executed.
- Under Windows, execution priority is set BELOW_NORMAL when the
  simulator is running.

2. Release Notes

2.1 Bugs Fixed

- PDP-11 CPU: fixed updating of MMR0 on a memory management error.
- VAX FPA: changed function names to avoid conflict with C math library.
- 1401 MT: read end of record generates group mark without word mark.
- 1401 DP: fixed address generation and checking.
- SCP: an EXIT within a DO command will cause the simulator to exit.

3. In Progress

- Interdata 16b/32b: coded, not tested.
- SDS 940: coded, not tested.
- IBM 1620: coded, not tested.

If you would like to help with the debugging of the untested simulators,
they can be made available by special request.
2011-04-15 08:33:43 -07:00

274 lines
8.2 KiB
Makefile
Raw Blame History

# Microsoft Visual C++ Generated NMAKE File, Format Version 2.00
# ** DO NOT EDIT **
# TARGTYPE "Win32 (x86) Console Application" 0x0103
!IF "$(CFG)" == ""
CFG=Win32 Debug
!MESSAGE No configuration specified. Defaulting to Win32 Debug.
!ENDIF
!IF "$(CFG)" != "Win32 Release" && "$(CFG)" != "Win32 Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running NMAKE on this makefile
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE NMAKE /f "ibm1130.mak" CFG="Win32 Debug"
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Win32 Release" (based on "Win32 (x86) Console Application")
!MESSAGE "Win32 Debug" (based on "Win32 (x86) Console Application")
!MESSAGE
!ERROR An invalid configuration is specified.
!ENDIF
################################################################################
# Begin Project
# PROP Target_Last_Scanned "Win32 Debug"
CPP=cl.exe
RSC=rc.exe
!IF "$(CFG)" == "Win32 Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "WinRel"
# PROP BASE Intermediate_Dir "WinRel"
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "WinRel"
# PROP Intermediate_Dir "WinRel"
OUTDIR=.\WinRel
INTDIR=.\WinRel
ALL : $(OUTDIR)/ibm1130.exe $(OUTDIR)/ibm1130.bsc
$(OUTDIR) :
if not exist $(OUTDIR)/nul mkdir $(OUTDIR)
# ADD BASE CPP /nologo /W3 /GX /YX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /FR /c
# ADD CPP /nologo /W3 /GX /YX /O2 /I "c:\pdp11\supnik" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "GUI_SUPPORT" /U "VMS" /FR /c
CPP_PROJ=/nologo /W3 /GX /YX /O2 /I "c:\pdp11\supnik" /D "NDEBUG" /D "WIN32" /D\
"_CONSOLE" /D "GUI_SUPPORT" /U "VMS" /FR$(INTDIR)/ /Fp$(OUTDIR)/"ibm1130.pch"\
/Fo$(INTDIR)/ /c
CPP_OBJS=.\WinRel/
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
RSC_PROJ=/l 0x409 /fo$(INTDIR)/"ibm1130.res" /d "NDEBUG"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
BSC32_FLAGS=/nologo /o$(OUTDIR)/"ibm1130.bsc"
BSC32_SBRS= \
$(INTDIR)/ibm1130_cpu.sbr \
$(INTDIR)/ibm1130_sys.sbr \
$(INTDIR)/ibm1130_cr.sbr \
$(INTDIR)/ibm1130_stddev.sbr \
$(INTDIR)/ibm1130_disk.sbr \
$(INTDIR)/scp_tty.sbr \
$(INTDIR)/scp.sbr
$(OUTDIR)/ibm1130.bsc : $(OUTDIR) $(BSC32_SBRS)
$(BSC32) @<<
$(BSC32_FLAGS) $(BSC32_SBRS)
<<
LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /NOLOGO /SUBSYSTEM:console /MACHINE:I386
# ADD LINK32 kernel32.lib user32.lib gdi32.lib comdlg32.lib advapi32.lib /NOLOGO /SUBSYSTEM:console /MACHINE:I386
LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib comdlg32.lib advapi32.lib\
/NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:$(OUTDIR)/"ibm1130.pdb"\
/MACHINE:I386 /OUT:$(OUTDIR)/"ibm1130.exe"
DEF_FILE=
LINK32_OBJS= \
$(INTDIR)/ibm1130_cpu.obj \
$(INTDIR)/ibm1130_sys.obj \
$(INTDIR)/ibm1130_cr.obj \
$(INTDIR)/ibm1130_stddev.obj \
$(INTDIR)/ibm1130.res \
$(INTDIR)/ibm1130_disk.obj \
$(INTDIR)/scp_tty.obj \
$(INTDIR)/scp.obj
$(OUTDIR)/ibm1130.exe : $(OUTDIR) $(DEF_FILE) $(LINK32_OBJS)
$(LINK32) @<<
$(LINK32_FLAGS) $(LINK32_OBJS)
<<
!ELSEIF "$(CFG)" == "Win32 Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "WinDebug"
# PROP BASE Intermediate_Dir "WinDebug"
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "WinDebug"
# PROP Intermediate_Dir "WinDebug"
OUTDIR=.\WinDebug
INTDIR=.\WinDebug
ALL : $(OUTDIR)/ibm1130.exe $(OUTDIR)/ibm1130.bsc
$(OUTDIR) :
if not exist $(OUTDIR)/nul mkdir $(OUTDIR)
# ADD BASE CPP /nologo /W3 /GX /Zi /YX /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /FR /c
# ADD CPP /nologo /W3 /GX /Zi /YX /Od /I "c:\pdp11\supnik" /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "GUI_SUPPORT" /U "VMS" /FR /c
CPP_PROJ=/nologo /W3 /GX /Zi /YX /Od /I "c:\pdp11\supnik" /D "_DEBUG" /D\
"WIN32" /D "_CONSOLE" /D "GUI_SUPPORT" /U "VMS" /FR$(INTDIR)/\
/Fp$(OUTDIR)/"ibm1130.pch" /Fo$(INTDIR)/ /Fd$(OUTDIR)/"ibm1130.pdb" /c
CPP_OBJS=.\WinDebug/
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
RSC_PROJ=/l 0x409 /fo$(INTDIR)/"ibm1130.res" /d "_DEBUG"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
BSC32_FLAGS=/nologo /o$(OUTDIR)/"ibm1130.bsc"
BSC32_SBRS= \
$(INTDIR)/ibm1130_cpu.sbr \
$(INTDIR)/ibm1130_sys.sbr \
$(INTDIR)/ibm1130_cr.sbr \
$(INTDIR)/ibm1130_stddev.sbr \
$(INTDIR)/ibm1130_disk.sbr \
$(INTDIR)/scp_tty.sbr \
$(INTDIR)/scp.sbr
$(OUTDIR)/ibm1130.bsc : $(OUTDIR) $(BSC32_SBRS)
$(BSC32) @<<
$(BSC32_FLAGS) $(BSC32_SBRS)
<<
LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /NOLOGO /SUBSYSTEM:console /DEBUG /MACHINE:I386
# ADD LINK32 kernel32.lib user32.lib gdi32.lib comdlg32.lib advapi32.lib /NOLOGO /SUBSYSTEM:console /DEBUG /MACHINE:I386
LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib comdlg32.lib advapi32.lib\
/NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:$(OUTDIR)/"ibm1130.pdb" /DEBUG\
/MACHINE:I386 /OUT:$(OUTDIR)/"ibm1130.exe"
DEF_FILE=
LINK32_OBJS= \
$(INTDIR)/ibm1130_cpu.obj \
$(INTDIR)/ibm1130_sys.obj \
$(INTDIR)/ibm1130_cr.obj \
$(INTDIR)/ibm1130_stddev.obj \
$(INTDIR)/ibm1130.res \
$(INTDIR)/ibm1130_disk.obj \
$(INTDIR)/scp_tty.obj \
$(INTDIR)/scp.obj
$(OUTDIR)/ibm1130.exe : $(OUTDIR) $(DEF_FILE) $(LINK32_OBJS)
$(LINK32) @<<
$(LINK32_FLAGS) $(LINK32_OBJS)
<<
!ENDIF
.c{$(CPP_OBJS)}.obj:
$(CPP) $(CPP_PROJ) $<
.cpp{$(CPP_OBJS)}.obj:
$(CPP) $(CPP_PROJ) $<
.cxx{$(CPP_OBJS)}.obj:
$(CPP) $(CPP_PROJ) $<
################################################################################
# Begin Group "Source Files"
################################################################################
# Begin Source File
SOURCE=.\ibm1130_cpu.c
DEP_IBM11=\
.\ibm1130_defs.h\
..\sim_defs.h
$(INTDIR)/ibm1130_cpu.obj : $(SOURCE) $(DEP_IBM11) $(INTDIR)
# End Source File
################################################################################
# Begin Source File
SOURCE=.\ibm1130_sys.c
DEP_IBM113=\
.\ibm1130_defs.h\
..\sim_defs.h
$(INTDIR)/ibm1130_sys.obj : $(SOURCE) $(DEP_IBM113) $(INTDIR)
# End Source File
################################################################################
# Begin Source File
SOURCE=.\ibm1130_cr.c
DEP_IBM1130=\
.\ibm1130_defs.h\
..\sim_defs.h
$(INTDIR)/ibm1130_cr.obj : $(SOURCE) $(DEP_IBM1130) $(INTDIR)
# End Source File
################################################################################
# Begin Source File
SOURCE=.\ibm1130_stddev.c
DEP_IBM1130_=\
.\ibm1130_defs.h\
.\ibm1130_conout.h\
.\ibm1130_conin.h\
.\ibm1130_prtwheel.h\
..\sim_defs.h
$(INTDIR)/ibm1130_stddev.obj : $(SOURCE) $(DEP_IBM1130_) $(INTDIR)
# End Source File
################################################################################
# Begin Source File
SOURCE=.\ibm1130.rc
DEP_IBM1130_R=\
.\1130consoleblank.bmp\
.\HAND.CUR
$(INTDIR)/ibm1130.res : $(SOURCE) $(DEP_IBM1130_R) $(INTDIR)
$(RSC) $(RSC_PROJ) $(SOURCE)
# End Source File
################################################################################
# Begin Source File
SOURCE=.\ibm1130_disk.c
DEP_IBM1130_D=\
.\ibm1130_defs.h\
..\sim_defs.h
$(INTDIR)/ibm1130_disk.obj : $(SOURCE) $(DEP_IBM1130_D) $(INTDIR)
# End Source File
################################################################################
# Begin Source File
SOURCE=..\scp_tty.c
DEP_SCP_T=\
..\sim_defs.h
$(INTDIR)/scp_tty.obj : $(SOURCE) $(DEP_SCP_T) $(INTDIR)
$(CPP) $(CPP_PROJ) $(SOURCE)
# End Source File
################################################################################
# Begin Source File
SOURCE=.\scp.c
DEP_SCP_C=\
.\sim_defs.h\
..\sim_rev.h
$(INTDIR)/scp.obj : $(SOURCE) $(DEP_SCP_C) $(INTDIR)
# End Source File
# End Group
# End Project
################################################################################
Reference in a new issue View git blame Copy permalink