df6475181c
1. New Features 1.1 GRI-909 - This is a new simulator for the GRI-909. - It has been hand-tested; so far, no software has been discovered. 1.2 VAX - SET CPU CONHALT will cause a HALT instruction to return to the boot ROM console rather than to SIMH. SET CPU SIMHALT restores the default behavior. - BRB/W self at IPL 1F stops the simulator. This is the default behavior of VMS at exit. 1.3 PDP-18b - ATTACH -A PTR/PTP attaches the reader and punch in ASCII mode. In ASCII mode, the reader automatically sets the high order bit of incoming alphabetic data, and the punch clears the high order bit of outgoing data. 1.4 SCP - DO -V echoes commands from the file as they are executed. - Under Windows, execution priority is set BELOW_NORMAL when the simulator is running. 2. Release Notes 2.1 Bugs Fixed - PDP-11 CPU: fixed updating of MMR0 on a memory management error. - VAX FPA: changed function names to avoid conflict with C math library. - 1401 MT: read end of record generates group mark without word mark. - 1401 DP: fixed address generation and checking. - SCP: an EXIT within a DO command will cause the simulator to exit. 3. In Progress - Interdata 16b/32b: coded, not tested. - SDS 940: coded, not tested. - IBM 1620: coded, not tested. If you would like to help with the debugging of the untested simulators, they can be made available by special request.
971 lines
31 KiB
C
971 lines
31 KiB
C
/* nova_cpu.c: NOVA CPU simulator
|
||
|
||
Copyright (c) 1993-2002, Robert M. Supnik
|
||
|
||
Permission is hereby granted, free of charge, to any person obtaining a
|
||
copy of this software and associated documentation files (the "Software"),
|
||
to deal in the Software without restriction, including without limitation
|
||
the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||
and/or sell copies of the Software, and to permit persons to whom the
|
||
Software is furnished to do so, subject to the following conditions:
|
||
|
||
The above copyright notice and this permission notice shall be included in
|
||
all copies or substantial portions of the Software.
|
||
|
||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
|
||
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||
|
||
Except as contained in this notice, the name of Robert M Supnik shall not
|
||
be used in advertising or otherwise to promote the sale, use or other dealings
|
||
in this Software without prior written authorization from Robert M Supnik.
|
||
|
||
cpu Nova central processor
|
||
|
||
30-Dec-01 RMS Added old PC queue
|
||
07-Dec-01 RMS Revised to use breakpoint package
|
||
30-Nov-01 RMS Added extended SET/SHOW support
|
||
10-Aug-01 RMS Removed register in declarations
|
||
17-Jul-01 RMS Moved function prototype
|
||
26-Apr-01 RMS Added device enable/disable support
|
||
05-Mar-01 RMS Added clock calibration
|
||
22-Dec-00 RMS Added Bruce Ray's second terminal
|
||
15-Dec-00 RMS Added Charles Owen's CPU bootstrap
|
||
08-Dec-00 RMS Changes from Bruce Ray
|
||
-- fixed trap test to include Nova 3
|
||
-- fixed DIV and DIVS divide by 0
|
||
-- fixed RETN to set SP from FP
|
||
-- fixed IORST to preserve carry
|
||
-- added "secret" Nova 4 PSHN/SAVEN instructions
|
||
-- added plotter support
|
||
15-Oct-00 RMS Fixed bug in MDV test, added stack, byte, trap instructions
|
||
14-Apr-98 RMS Changed t_addr to unsigned
|
||
15-Sep-97 RMS Added read and write breakpoints
|
||
|
||
The register state for the NOVA CPU is:
|
||
|
||
AC[0:3]<0:15> general registers
|
||
C carry flag
|
||
PC<0:14> program counter
|
||
|
||
The NOVA has three instruction formats: memory reference, I/O transfer,
|
||
and operate. The memory reference format is:
|
||
|
||
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
||
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||
| 0| op | AC |in| mode| displacement | memory reference
|
||
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||
|
||
<0:4> mnemonic action
|
||
|
||
00000 JMP PC = MA
|
||
00001 JMS AC3 = PC, PC = MA
|
||
00010 ISZ M[MA] = M[MA] + 1, skip if M[MA] == 0
|
||
00011 DSZ M[MA] = M[MA] - 1, skip if M[MA] == 0
|
||
001'n LDA ACn = M[MA]
|
||
010'n STA M[MA] = ACn
|
||
|
||
<5:7> mode action
|
||
|
||
000 page zero direct MA = zext (IR<8:15>)
|
||
001 PC relative direct MA = PC + sext (IR<8:15>)
|
||
010 AC2 relative direct MA = AC2 + sext (IR<8:15>)
|
||
011 AC3 relative direct MA = AC3 + sext (IR<8:15>)
|
||
100 page zero indirect MA = M[zext (IR<8:15>)]
|
||
101 PC relative indirect MA = M[PC + sext (IR<8:15>)]
|
||
110 AC2 relative indirect MA = M[AC2 + sext (IR<8:15>)]
|
||
111 AC3 relative indirect MA = M[AC3 + sext (IR<8:15>)]
|
||
|
||
Memory reference instructions can access an address space of 32K words.
|
||
An instruction can directly reference the first 256 words of memory
|
||
(called page zero), as well as 256 words relative to the PC, AC2, or
|
||
AC3; it can indirectly access all 32K words. If an indirect address
|
||
is in locations 00020-00027, the indirect address is incremented and
|
||
rewritten to memory before use; if in 00030-00037, decremented and
|
||
rewritten.
|
||
*/
|
||
|
||
/* The I/O transfer format is:
|
||
|
||
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
||
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||
| 0 1 1| AC | opcode |pulse| device | I/O transfer
|
||
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||
|
||
The IOT instruction sends the opcode, pulse, and specified AC to the
|
||
specified I/O device. The device may accept data, provide data,
|
||
initiate or cancel operations, or skip on status.
|
||
|
||
The operate format is:
|
||
|
||
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
||
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||
| 1|srcAC|dstAC| opcode |shift|carry|nl| skip | operate
|
||
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||
\______/ \___/ \___/ | | | |
|
||
| | | | | | +--- reverse skip sense
|
||
| | | | | +--- skip if C == 0
|
||
| | | | +--- skip if result == 0
|
||
| | | +--- don't load result
|
||
| | +--- carry in (load as is,
|
||
| | set to Zero,
|
||
| | set to One,
|
||
| | load Complement)
|
||
| +--- shift (none,
|
||
| left one,
|
||
| right one,
|
||
| byte swap)
|
||
+--- operation (complement,
|
||
negate,
|
||
move,
|
||
increment,
|
||
add complement,
|
||
subtract,
|
||
add,
|
||
and)
|
||
|
||
The operate instruction can be microprogrammed to perform operations
|
||
on the source and destination AC's and the Carry flag.
|
||
|
||
Some notes from Bruce Ray:
|
||
|
||
1. DG uses the value of the autoindex location -before- the
|
||
modification to determine if additional indirect address
|
||
levels are to be performed. Most DG emulators conform to
|
||
this standard, but some vendor machines (i.e. Point 4 Mark 8)
|
||
do not.
|
||
|
||
2. Infinite indirect references may occur on unmapped systems
|
||
and can "hang" the hardware. Some DG diagnostics perform
|
||
10,000s of references during a single instruction.
|
||
|
||
3. Nova 3 adds the following instructions to the standard Nova
|
||
instruction set:
|
||
|
||
trap instructions
|
||
stack push/pop instructions
|
||
save/return instructions
|
||
stack register manipulation instructions
|
||
unsigned MUL/DIV
|
||
|
||
4. Nova 4 adds the following instructions to the Nova 3 instruction
|
||
set:
|
||
|
||
signed MUL/DIV
|
||
load/store byte
|
||
secret (undocumented) stack instructions [PSHN, SAVN]
|
||
|
||
5. Nova, Nova 3 and Nova 4 unsigned mul/div instructions are the
|
||
same instruction code values on all machines.
|
||
*/
|
||
|
||
/* This routine is the instruction decode routine for the NOVA.
|
||
It is called from the simulator control program to execute
|
||
instructions in simulated memory, starting at the simulated PC.
|
||
It runs until 'reason' is set non-zero.
|
||
|
||
General notes:
|
||
|
||
1. Reasons to stop. The simulator can be stopped by:
|
||
|
||
HALT instruction
|
||
breakpoint encountered
|
||
infinite indirection loop
|
||
unknown I/O device and STOP_DEV flag set
|
||
I/O error in I/O simulator
|
||
|
||
2. Interrupts. Interrupts are maintained by four parallel variables:
|
||
|
||
dev_done device done flags
|
||
dev_disable device interrupt disable flags
|
||
dev_busy device busy flags
|
||
int_req interrupt requests
|
||
|
||
In addition, int_req contains the interrupt enable and ION pending
|
||
flags. If ION and ION pending are set, and at least one interrupt
|
||
request is pending, then an interrupt occurs. Note that the 16b PIO
|
||
mask must be mapped to the simulator's device bit mapping.
|
||
|
||
3. Non-existent memory. On the NOVA, reads to non-existent memory
|
||
return zero, and writes are ignored. In the simulator, the
|
||
largest possible memory is instantiated and initialized to zero.
|
||
Thus, only writes need be checked against actual memory size.
|
||
|
||
4. Adding I/O devices. These modules must be modified:
|
||
|
||
nova_defs.h add interrupt request definition
|
||
nova_cpu.c add IOT mask, PI mask, and routine to dev_table
|
||
nova_sys.c add pointer to data structures to sim_devices
|
||
*/
|
||
|
||
#include "nova_defs.h"
|
||
|
||
#define PCQ_SIZE 64 /* must be 2**n */
|
||
#define PCQ_MASK (PCQ_SIZE - 1)
|
||
#define PCQ_ENTRY pcq[pcq_p = (pcq_p - 1) & PCQ_MASK] = PC
|
||
|
||
#define INCA(x) (((x) + 1) & AMASK)
|
||
#define DECA(x) (((x) - 1) & AMASK)
|
||
#define SEXT(x) (((x) & SIGN)? ((x) | ~DMASK): (x))
|
||
#define STK_CHECK(x,y) if (((x) & 0377) < (y)) int_req = int_req | INT_STK
|
||
#define IND_STEP(x) M[x] & A_IND; \
|
||
if (((x) & 077770) == AUTO_INC) \
|
||
M[x] = (M[x] + 1) & 0177777; \
|
||
else if (((x) & 077770) == AUTO_DEC) \
|
||
M[x] = (M[x] - 1) & 0177777; \
|
||
x = M[x] & AMASK
|
||
|
||
#define UNIT_V_MDV (UNIT_V_UF) /* MDV present */
|
||
#define UNIT_MDV (1 << UNIT_V_MDV)
|
||
#define UNIT_V_STK (UNIT_V_UF+1) /* stack instr */
|
||
#define UNIT_STK (1 << UNIT_V_STK)
|
||
#define UNIT_V_BYT (UNIT_V_UF+2) /* byte instr */
|
||
#define UNIT_BYT (1 << UNIT_V_BYT)
|
||
#define UNIT_IOPT (UNIT_MDV | UNIT_STK | UNIT_BYT)
|
||
#define UNIT_NOVA3 (UNIT_MDV | UNIT_STK)
|
||
#define UNIT_NOVA4 (UNIT_MDV | UNIT_STK | UNIT_BYT)
|
||
#define UNIT_V_MSIZE (UNIT_V_UF+3) /* dummy mask */
|
||
#define UNIT_MSIZE (1 << UNIT_V_MSIZE)
|
||
|
||
uint16 M[MAXMEMSIZE] = { 0 }; /* memory */
|
||
int32 AC[4] = { 0 }; /* accumulators */
|
||
int32 C = 0; /* carry flag */
|
||
int32 saved_PC = 0; /* program counter */
|
||
int32 SP = 0; /* stack pointer */
|
||
int32 FP = 0; /* frame pointer */
|
||
int32 SR = 0; /* switch register */
|
||
int32 dev_done = 0; /* device done flags */
|
||
int32 dev_busy = 0; /* device busy flags */
|
||
int32 dev_disable = 0; /* int disable flags */
|
||
int32 iot_enb = -1; /* IOT enables */
|
||
int32 int_req = 0; /* interrupt requests */
|
||
int32 pimask = 0; /* priority int mask */
|
||
int32 pwr_low = 0; /* power fail flag */
|
||
int32 ind_max = 16; /* iadr nest limit */
|
||
int32 stop_dev = 0; /* stop on ill dev */
|
||
uint16 pcq[PCQ_SIZE] = { 0 }; /* PC queue */
|
||
int32 pcq_p = 0; /* PC queue ptr */
|
||
REG *pcq_r = NULL; /* PC queue reg ptr */
|
||
extern int32 sim_int_char;
|
||
extern int32 sim_brk_types, sim_brk_dflt, sim_brk_summ; /* breakpoint info */
|
||
|
||
t_stat cpu_ex (t_value *vptr, t_addr addr, UNIT *uptr, int32 sw);
|
||
t_stat cpu_dep (t_value val, t_addr addr, UNIT *uptr, int32 sw);
|
||
t_stat cpu_reset (DEVICE *dptr);
|
||
t_stat cpu_set_size (UNIT *uptr, int32 val, char *cptr, void *desc);
|
||
t_stat cpu_boot (int32 unitno);
|
||
extern int32 ptr (int32 pulse, int32 code, int32 AC);
|
||
extern int32 ptp (int32 pulse, int32 code, int32 AC);
|
||
extern int32 tti (int32 pulse, int32 code, int32 AC);
|
||
extern int32 tto (int32 pulse, int32 code, int32 AC);
|
||
extern int32 tti1 (int32 pulse, int32 code, int32 AC);
|
||
extern int32 tto1 (int32 pulse, int32 code, int32 AC);
|
||
extern int32 clk (int32 pulse, int32 code, int32 AC);
|
||
extern int32 plt (int32 pulse, int32 code, int32 AC);
|
||
extern int32 lpt (int32 pulse, int32 code, int32 AC);
|
||
extern int32 dsk (int32 pulse, int32 code, int32 AC);
|
||
extern int32 dkp (int32 pulse, int32 code, int32 AC);
|
||
extern int32 mta (int32 pulse, int32 code, int32 AC);
|
||
int32 nulldev (int32 pulse, int32 code, int32 AC);
|
||
extern t_stat sim_activate (UNIT *uptr, int32 delay);
|
||
|
||
/* IOT dispatch table */
|
||
|
||
struct ndev dev_table[64] = {
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev }, /* 0 - 7 */
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ INT_TTI, PI_TTI, &tti }, { INT_TTO, PI_TTO, &tto }, /* 10 - 17 */
|
||
{ INT_PTR, PI_PTR, &ptr }, { INT_PTP, PI_PTP, &ptp },
|
||
{ INT_CLK, PI_CLK, &clk }, { INT_PLT, PI_PLT, &plt },
|
||
{ 0, 0, &nulldev }, { INT_LPT, PI_LPT, &lpt },
|
||
{ INT_DSK, PI_DSK, &dsk }, { 0, 0, &nulldev }, /* 20 - 27 */
|
||
{ INT_MTA, PI_MTA, &mta }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev }, /* 30 - 37 */
|
||
{ 0, 0, &nulldev }, {INT_DKP, PI_DKP, &dkp },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev }, /* 40 - 47 */
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ INT_TTI1, PI_TTI1, &tti1 }, { INT_TTO1, PI_TTO1, &tto1 }, /* 50 - 57 */
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev }, /* 60 - 67 */
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev }, /* 70 - 77 */
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev },
|
||
{ 0, 0, &nulldev }, { 0, 0, &nulldev } };
|
||
|
||
/* CPU data structures
|
||
|
||
cpu_dev CPU device descriptor
|
||
cpu_unit CPU unit descriptor
|
||
cpu_reg CPU register list
|
||
cpu_mod CPU modifiers list
|
||
*/
|
||
|
||
UNIT cpu_unit = { UDATA (NULL, UNIT_FIX + UNIT_BINK + UNIT_MDV,
|
||
MAXMEMSIZE) };
|
||
|
||
REG cpu_reg[] = {
|
||
{ ORDATA (PC, saved_PC, 15) },
|
||
{ ORDATA (AC0, AC[0], 16) },
|
||
{ ORDATA (AC1, AC[1], 16) },
|
||
{ ORDATA (AC2, AC[2], 16) },
|
||
{ ORDATA (AC3, AC[3], 16) },
|
||
{ FLDATA (C, C, 16) },
|
||
{ ORDATA (SP, SP, 16) },
|
||
{ ORDATA (FP, FP, 16) },
|
||
{ ORDATA (SR, SR, 16) },
|
||
{ ORDATA (PI, pimask, 16) },
|
||
{ FLDATA (ION, int_req, INT_V_ION) },
|
||
{ FLDATA (ION_DELAY, int_req, INT_V_NO_ION_PENDING) },
|
||
{ FLDATA (STKOVF, int_req, INT_V_STK) },
|
||
{ FLDATA (PWR, pwr_low, 0) },
|
||
{ ORDATA (INT, int_req, INT_V_ION+1), REG_RO },
|
||
{ ORDATA (BUSY, dev_busy, INT_V_ION+1), REG_RO },
|
||
{ ORDATA (DONE, dev_done, INT_V_ION+1), REG_RO },
|
||
{ ORDATA (DISABLE, dev_disable, INT_V_ION+1), REG_RO },
|
||
{ FLDATA (STOP_DEV, stop_dev, 0) },
|
||
{ FLDATA (MDV, cpu_unit.flags, UNIT_V_MDV), REG_HRO },
|
||
{ FLDATA (ISTK, cpu_unit.flags, UNIT_V_STK), REG_HRO },
|
||
{ FLDATA (IBYT, cpu_unit.flags, UNIT_V_BYT), REG_HRO },
|
||
{ DRDATA (INDMAX, ind_max, 16), REG_NZ + PV_LEFT },
|
||
{ BRDATA (PCQ, pcq, 8, 16, PCQ_SIZE), REG_RO+REG_CIRC },
|
||
{ ORDATA (PCQP, pcq_p, 6), REG_HRO },
|
||
{ ORDATA (WRU, sim_int_char, 8) },
|
||
{ ORDATA (IOTENB, iot_enb, 32), REG_HRO },
|
||
{ NULL } };
|
||
|
||
MTAB cpu_mod[] = {
|
||
{ UNIT_IOPT, UNIT_NOVA3, "NOVA3", "NOVA3", NULL },
|
||
{ UNIT_IOPT, UNIT_NOVA4, "NOVA4", "NOVA4", NULL },
|
||
{ UNIT_IOPT, UNIT_MDV, "MDV", "MDV", NULL },
|
||
{ UNIT_IOPT, 0, "none", "NONE", NULL },
|
||
{ UNIT_MSIZE, 4096, NULL, "4K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 8192, NULL, "8K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 12288, NULL, "12K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 16384, NULL, "16K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 20480, NULL, "20K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 24576, NULL, "24K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 28672, NULL, "28K", &cpu_set_size },
|
||
{ UNIT_MSIZE, 32768, NULL, "32K", &cpu_set_size },
|
||
{ 0 } };
|
||
|
||
DEVICE cpu_dev = {
|
||
"CPU", &cpu_unit, cpu_reg, cpu_mod,
|
||
1, 8, 15, 1, 8, 16,
|
||
&cpu_ex, &cpu_dep, &cpu_reset,
|
||
NULL, NULL, NULL };
|
||
|
||
t_stat sim_instr (void)
|
||
{
|
||
extern int32 sim_interval;
|
||
int32 PC, IR, i;
|
||
t_stat reason;
|
||
void mask_out (int32 mask);
|
||
extern int32 clk_sel, clk_time[4];
|
||
|
||
/* Restore register state */
|
||
|
||
PC = saved_PC & AMASK; /* load local PC */
|
||
C = C & CBIT;
|
||
mask_out (pimask); /* reset int system */
|
||
reason = 0;
|
||
sim_rtc_init (clk_time[clk_sel]); /* init calibration */
|
||
|
||
/* Main instruction fetch/decode loop */
|
||
|
||
while (reason == 0) { /* loop until halted */
|
||
if (sim_interval <= 0) { /* check clock queue */
|
||
if (reason = sim_process_event ()) break; }
|
||
|
||
if (int_req > INT_PENDING) { /* interrupt? */
|
||
int32 MA, indf;
|
||
int_req = int_req & ~INT_ION; /* intr off */
|
||
PCQ_ENTRY; /* save old PC */
|
||
M[INT_SAV] = PC;
|
||
if (int_req & INT_STK) { /* stack overflow? */
|
||
int_req = int_req & ~INT_STK; /* clear */
|
||
MA = STK_JMP; } /* jmp @3 */
|
||
else MA = INT_JMP; /* intr: jmp @1 */
|
||
for (i = 0, indf = 1; indf && (i < ind_max); i++) {
|
||
indf = IND_STEP (MA); } /* indirect loop */
|
||
if (i >= ind_max) {
|
||
reason = STOP_IND_INT;
|
||
break; }
|
||
PC = MA; } /* end interrupt */
|
||
|
||
if (sim_brk_summ && sim_brk_test (PC, SWMASK ('E'))) { /* breakpoint? */
|
||
reason = STOP_IBKPT; /* stop simulation */
|
||
break; }
|
||
|
||
IR = M[PC]; /* fetch instr */
|
||
PC = (PC + 1) & AMASK;
|
||
int_req = int_req | INT_NO_ION_PENDING; /* clear ION delay */
|
||
sim_interval = sim_interval - 1;
|
||
|
||
/* Operate instruction */
|
||
|
||
if (IR & I_OPR) { /* operate? */
|
||
int32 src, srcAC, dstAC;
|
||
srcAC = I_GETSRC (IR); /* get reg decodes */
|
||
dstAC = I_GETDST (IR);
|
||
switch (I_GETCRY (IR)) { /* decode carry */
|
||
case 0: /* load */
|
||
src = AC[srcAC] | C;
|
||
break;
|
||
case 1: /* clear */
|
||
src = AC[srcAC];
|
||
break;
|
||
case 2: /* set */
|
||
src = AC[srcAC] | CBIT;
|
||
break;
|
||
case 3: /* complement */
|
||
src = AC[srcAC] | (C ^ CBIT);
|
||
break; } /* end switch carry */
|
||
switch (I_GETALU (IR)) { /* decode ALU */
|
||
case 0: /* COM */
|
||
src = src ^ DMASK;
|
||
break;
|
||
case 1: /* NEG */
|
||
src = ((src ^ DMASK) + 1) & CMASK;
|
||
break;
|
||
case 2: /* MOV */
|
||
break;
|
||
case 3: /* INC */
|
||
src = (src + 1) & CMASK;
|
||
break;
|
||
case 4: /* ADC */
|
||
src = ((src ^ DMASK) + AC[dstAC]) & CMASK;
|
||
break;
|
||
case 5: /* SUB */
|
||
src = ((src ^ DMASK) + AC[dstAC] + 1) & CMASK;
|
||
break;
|
||
case 6: /* ADD */
|
||
src = (src + AC[dstAC]) & CMASK;
|
||
break;
|
||
case 7: /* AND */
|
||
src = src & (AC[dstAC] | CBIT);
|
||
break; } /* end switch oper */
|
||
|
||
/* Operate, continued */
|
||
|
||
switch (I_GETSHF (IR)) { /* decode shift */
|
||
case 0: /* nop */
|
||
break;
|
||
case 1: /* L */
|
||
src = ((src << 1) | (src >> 16)) & CMASK;
|
||
break;
|
||
case 2: /* R */
|
||
src = ((src >> 1) | (src << 16)) & CMASK;
|
||
break;
|
||
case 3: /* S */
|
||
src = ((src & 0377) << 8) | ((src >> 8) & 0377) |
|
||
(src & CBIT);
|
||
break; } /* end switch shift */
|
||
switch (I_GETSKP (IR)) { /* decode skip */
|
||
case 0: /* nop */
|
||
if ((IR & I_NLD) && (cpu_unit.flags & UNIT_STK)) {
|
||
int32 indf, MA; /* Nova 3 or 4 trap */
|
||
PCQ_ENTRY; /* save old PC */
|
||
M[TRP_SAV] = (PC - 1) & AMASK;
|
||
MA = TRP_JMP; /* jmp @47 */
|
||
for (i = 0, indf = 1; indf && (i < ind_max); i++) {
|
||
indf = IND_STEP (MA); } /* resolve ind */
|
||
if (i >= ind_max) { /* indirect loop? */
|
||
reason = STOP_IND_TRP;
|
||
break; }
|
||
PC = MA; /* new PC */
|
||
break; }
|
||
break;
|
||
case 1: /* SKP */
|
||
PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 2: /* SZC */
|
||
if (src < CBIT) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 3: /* SNC */
|
||
if (src >= CBIT) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 4: /* SZR */
|
||
if ((src & DMASK) == 0) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 5: /* SNR */
|
||
if ((src & DMASK) != 0) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 6: /* SEZ */
|
||
if (src <= CBIT) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 7: /* SBN */
|
||
if (src > CBIT) PC = (PC + 1) & AMASK;
|
||
break; } /* end switch skip */
|
||
if ((IR & I_NLD) == 0) { /* load? */
|
||
AC[dstAC] = src & DMASK;
|
||
C = src & CBIT; } /* end if load */
|
||
} /* end if operate */
|
||
|
||
/* Memory reference instructions */
|
||
|
||
else if (IR < 060000) { /* mem ref? */
|
||
int32 src, MA, indf;
|
||
MA = I_GETDISP (IR); /* get disp */
|
||
switch (I_GETMODE (IR)) { /* decode mode */
|
||
case 0: /* page zero */
|
||
break;
|
||
case 1: /* PC relative */
|
||
if (MA & DISPSIGN) MA = 077400 | MA;
|
||
MA = (MA + PC - 1) & AMASK;
|
||
break;
|
||
case 2: /* AC2 relative */
|
||
if (MA & DISPSIGN) MA = 077400 | MA;
|
||
MA = (MA + AC[2]) & AMASK;
|
||
break;
|
||
case 3: /* AC3 relative */
|
||
if (MA & DISPSIGN) MA = 077400 | MA;
|
||
MA = (MA + AC[3]) & AMASK;
|
||
break; } /* end switch mode */
|
||
|
||
if (indf = IR & I_IND) { /* indirect? */
|
||
for (i = 0; indf && (i < ind_max); i++) { /* count */
|
||
indf = IND_STEP (MA); } /* resolve indirect */
|
||
if (i >= ind_max) { /* too many? */
|
||
reason = STOP_IND;
|
||
break; } }
|
||
|
||
/* Memory reference, continued */
|
||
|
||
switch (I_GETOPAC (IR)) { /* decode op + AC */
|
||
case 001: /* JSR */
|
||
AC[3] = PC;
|
||
case 000: /* JMP */
|
||
PCQ_ENTRY;
|
||
PC = MA;
|
||
break;
|
||
case 002: /* ISZ */
|
||
src = (M[MA] + 1) & DMASK;
|
||
if (MEM_ADDR_OK (MA)) M[MA] = src;
|
||
if (src == 0) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 003: /* DSZ */
|
||
src = (M[MA] - 1) & DMASK;
|
||
if (MEM_ADDR_OK (MA)) M[MA] = src;
|
||
if (src == 0) PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 004: /* LDA 0 */
|
||
AC[0] = M[MA];
|
||
break;
|
||
case 005: /* LDA 1 */
|
||
AC[1] = M[MA];
|
||
break;
|
||
case 006: /* LDA 2 */
|
||
AC[2] = M[MA];
|
||
break;
|
||
case 007: /* LDA 3 */
|
||
AC[3] = M[MA];
|
||
break;
|
||
case 010: /* STA 0 */
|
||
if (MEM_ADDR_OK (MA)) M[MA] = AC[0];
|
||
break;
|
||
case 011: /* STA 1 */
|
||
if (MEM_ADDR_OK (MA)) M[MA] = AC[1];
|
||
break;
|
||
case 012: /* STA 2 */
|
||
if (MEM_ADDR_OK (MA)) M[MA] = AC[2];
|
||
break;
|
||
case 013: /* STA 3 */
|
||
if (MEM_ADDR_OK (MA)) M[MA] = AC[3];
|
||
break; } /* end switch */
|
||
} /* end mem ref */
|
||
|
||
/* IOT instruction */
|
||
|
||
else { /* IOT */
|
||
int32 dstAC, pulse, code, device, iodata;
|
||
dstAC = I_GETDST (IR); /* decode fields */
|
||
code = I_GETIOT (IR);
|
||
pulse = I_GETPULSE (IR);
|
||
device = I_GETDEV (IR);
|
||
if (code == ioSKP) { /* IO skip? */
|
||
switch (pulse) { /* decode IR<8:9> */
|
||
case 0: /* skip if busy */
|
||
if ((device == DEV_CPU)? (int_req & INT_ION) != 0:
|
||
(dev_busy & dev_table[device].mask) != 0)
|
||
PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 1: /* skip if not busy */
|
||
if ((device == DEV_CPU)? (int_req & INT_ION) == 0:
|
||
(dev_busy & dev_table[device].mask) == 0)
|
||
PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 2: /* skip if done */
|
||
if ((device == DEV_CPU)? pwr_low != 0:
|
||
(dev_done & dev_table[device].mask) != 0)
|
||
PC = (PC + 1) & AMASK;
|
||
break;
|
||
case 3: /* skip if not done */
|
||
if ((device == DEV_CPU)? pwr_low == 0:
|
||
(dev_done & dev_table[device].mask) == 0)
|
||
PC = (PC + 1) & AMASK;
|
||
break; } /* end switch */
|
||
} /* end IO skip */
|
||
|
||
/* IOT, continued */
|
||
|
||
else if (device == DEV_MDV) {
|
||
switch (code) { /* case on opcode */
|
||
case ioNIO: /* frame ptr */
|
||
if (cpu_unit.flags & UNIT_STK) {
|
||
if (pulse == iopN) FP = AC[dstAC] & AMASK;
|
||
if (pulse == iopC) AC[dstAC] = FP; }
|
||
break;
|
||
case ioDIA: /* load byte */
|
||
if (cpu_unit.flags & UNIT_BYT)
|
||
AC[dstAC] = (M[AC[pulse] >> 1] >>
|
||
((AC[pulse] & 1)? 0: 8)) & 0377;
|
||
else AC[dstAC] = 0;
|
||
break;
|
||
case ioDOA: /* stack ptr */
|
||
if (cpu_unit.flags & UNIT_STK) {
|
||
if (pulse == iopN) SP = AC[dstAC] & AMASK;
|
||
if (pulse == iopC) AC[dstAC] = SP; }
|
||
break;
|
||
case ioDIB: /* push, pop */
|
||
if (cpu_unit.flags & UNIT_STK) {
|
||
if (pulse == iopN) { /* push */
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[dstAC];
|
||
STK_CHECK (SP, 1); }
|
||
if (pulse == iopC) { /* pop */
|
||
AC[dstAC] = M[SP];
|
||
SP = DECA (SP); }
|
||
if ((pulse == iopP) && /* Nova 4 pshn */
|
||
(cpu_unit.flags & UNIT_BYT)) {
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[dstAC];
|
||
if (SP > M[042]) int_req = int_req | INT_STK ;
|
||
}
|
||
}
|
||
break;
|
||
case ioDOB: /* store byte */
|
||
if (cpu_unit.flags & UNIT_BYT) {
|
||
int32 MA, val;
|
||
MA = AC[pulse] >> 1;
|
||
val = AC[dstAC] & 0377;
|
||
if (MEM_ADDR_OK (MA)) M[MA] = (AC[pulse] & 1)?
|
||
((M[MA] & ~0377) | val):
|
||
((M[MA] & 0377) | (val << 8)); }
|
||
break;
|
||
case ioDIC: /* save, return */
|
||
if (cpu_unit.flags & UNIT_STK) {
|
||
if (pulse == iopN) { /* save */
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[0];
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[1];
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[2];
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = FP;
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = (C >> 1) |
|
||
(AC[3] & AMASK);
|
||
AC[3] = FP = SP & AMASK;
|
||
STK_CHECK (SP, 5); }
|
||
if (pulse == iopC) { /* retn */
|
||
PCQ_ENTRY;
|
||
SP = FP & AMASK;
|
||
C = (M[SP] << 1) & CBIT;
|
||
PC = M[SP] & AMASK;
|
||
SP = DECA (SP);
|
||
AC[3] = M[SP];
|
||
SP = DECA (SP);
|
||
AC[2] = M[SP];
|
||
SP = DECA (SP);
|
||
AC[1] = M[SP];
|
||
SP = DECA (SP);
|
||
AC[0] = M[SP];
|
||
SP = DECA (SP);
|
||
FP = AC[3] & AMASK; }
|
||
if ((pulse == iopP) && /* Nova 4 saven */
|
||
(cpu_unit.flags & UNIT_BYT)) {
|
||
int32 frameSz = M[PC] ;
|
||
PC = INCA (PC) ;
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[0];
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[1];
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = AC[2];
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = FP;
|
||
SP = INCA (SP);
|
||
if (MEM_ADDR_OK (SP)) M[SP] = (C >> 1) |
|
||
(AC[3] & AMASK);
|
||
AC[3] = FP = SP & AMASK ;
|
||
SP = (SP + frameSz) & AMASK ;
|
||
if (SP > M[042]) int_req = int_req | INT_STK;
|
||
}
|
||
}
|
||
break;
|
||
case ioDOC:
|
||
if ((dstAC == 2) && (cpu_unit.flags & UNIT_MDV)) {
|
||
uint32 mddata, uAC0, uAC1, uAC2;
|
||
uAC0 = (unsigned int32) AC[0];
|
||
uAC1 = (unsigned int32) AC[1];
|
||
uAC2 = (unsigned int32) AC[2];
|
||
if (pulse == iopP) { /* mul */
|
||
mddata = (uAC1 * uAC2) + uAC0;
|
||
AC[0] = (mddata >> 16) & DMASK;
|
||
AC[1] = mddata & DMASK; }
|
||
if (pulse == iopS) { /* div */
|
||
if ((uAC0 >= uAC2) || (uAC2 == 0))
|
||
C = CBIT;
|
||
else { C = 0;
|
||
mddata = (uAC0 << 16) | uAC1;
|
||
AC[1] = mddata / uAC2;
|
||
AC[0] = mddata % uAC2; } } }
|
||
if ((dstAC == 3) && (cpu_unit.flags & UNIT_BYT)) {
|
||
int32 mddata;
|
||
if (pulse == iopC) { /* muls */
|
||
mddata = (SEXT (AC[1]) * SEXT (AC[2])) +
|
||
SEXT (AC[0]);
|
||
AC[0] = (mddata >> 16) & DMASK;
|
||
AC[1] = mddata & DMASK; }
|
||
if (pulse == iopN) { /* divs */
|
||
if (AC[2] == 0) C = CBIT;
|
||
else { mddata = (SEXT (AC[0]) << 16) | AC[1];
|
||
AC[1] = mddata / SEXT (AC[2]);
|
||
AC[0] = mddata % SEXT (AC[2]);
|
||
if ((AC[1] > 077777) || (AC[1] < -0100000))
|
||
C = CBIT;
|
||
else C = 0;
|
||
AC[0] = AC[0] & DMASK; } } }
|
||
break; } /* end case code */
|
||
} /* end if mul/div */
|
||
|
||
/* IOT, continued */
|
||
|
||
else if (device == DEV_CPU) { /* CPU control */
|
||
switch (code) { /* decode IR<5:7> */
|
||
case ioDIA: /* read switches */
|
||
AC[dstAC] = SR;
|
||
break;
|
||
case ioDIB: /* int ack */
|
||
AC[dstAC] = 0;
|
||
int_req = (int_req & ~INT_DEV) |
|
||
(dev_done & ~dev_disable);
|
||
iodata = int_req & (-int_req);
|
||
for (i = DEV_LOW; i <= DEV_HIGH; i++) {
|
||
if (iodata & dev_table[i].mask) {
|
||
AC[dstAC] = i; break; } }
|
||
break;
|
||
case ioDOB: /* mask out */
|
||
mask_out (pimask = AC[dstAC]);
|
||
break;
|
||
case ioDIC: /* io reset */
|
||
reset_all (0); /* reset devices */
|
||
break;
|
||
case ioDOC: /* halt */
|
||
reason = STOP_HALT;
|
||
break; } /* end switch code */
|
||
switch (pulse) { /* decode IR<8:9> */
|
||
case iopS: /* ion */
|
||
int_req = (int_req | INT_ION) & ~INT_NO_ION_PENDING;
|
||
break;
|
||
case iopC: /* iof */
|
||
int_req = int_req & ~INT_ION;
|
||
break; } /* end switch pulse */
|
||
} /* end CPU control */
|
||
else if ((dev_table[device].mask == 0) ||
|
||
(dev_table[device].mask & iot_enb)) { /* normal device */
|
||
iodata = dev_table[device].routine (pulse, code, AC[dstAC]);
|
||
reason = iodata >> IOT_V_REASON;
|
||
if (code & 1) AC[dstAC] = iodata & 0177777; }
|
||
else reason = stop_dev;
|
||
} /* end if IOT */
|
||
} /* end while */
|
||
|
||
/* Simulation halted */
|
||
|
||
saved_PC = PC;
|
||
pcq_r -> qptr = pcq_p; /* update pc q ptr */
|
||
return reason;
|
||
}
|
||
|
||
/* Null device */
|
||
|
||
int32 nulldev (int32 pulse, int32 code, int32 AC)
|
||
{
|
||
return stop_dev << IOT_V_REASON;
|
||
}
|
||
|
||
/* New priority mask out */
|
||
|
||
void mask_out (int32 newmask)
|
||
{
|
||
int32 i;
|
||
|
||
dev_disable = 0;
|
||
for (i = DEV_LOW; i <= DEV_HIGH; i++) {
|
||
if (newmask & dev_table[i].pi)
|
||
dev_disable = dev_disable | dev_table[i].mask; }
|
||
int_req = (int_req & ~INT_DEV) | (dev_done & ~dev_disable);
|
||
return;
|
||
}
|
||
|
||
/* Reset routine */
|
||
|
||
t_stat cpu_reset (DEVICE *dptr)
|
||
{
|
||
int_req = int_req & ~(INT_ION | INT_STK);
|
||
pimask = 0;
|
||
dev_disable = 0;
|
||
pwr_low = 0;
|
||
pcq_r = find_reg ("PCQ", NULL, dptr);
|
||
if (pcq_r) pcq_r -> qptr = 0;
|
||
else return SCPE_IERR;
|
||
sim_brk_types = sim_brk_dflt = SWMASK ('E');
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Memory examine */
|
||
|
||
t_stat cpu_ex (t_value *vptr, t_addr addr, UNIT *uptr, int32 sw)
|
||
{
|
||
if (addr >= MEMSIZE) return SCPE_NXM;
|
||
if (vptr != NULL) *vptr = M[addr] & DMASK;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Memory deposit */
|
||
|
||
t_stat cpu_dep (t_value val, t_addr addr, UNIT *uptr, int32 sw)
|
||
{
|
||
if (addr >= MEMSIZE) return SCPE_NXM;
|
||
M[addr] = val & DMASK;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
t_stat cpu_set_size (UNIT *uptr, int32 val, char *cptr, void *desc)
|
||
{
|
||
int32 mc = 0;
|
||
t_addr i;
|
||
|
||
if ((val <= 0) || (val > MAXMEMSIZE) || ((val & 07777) != 0))
|
||
return SCPE_ARG;
|
||
for (i = val; i < MEMSIZE; i++) mc = mc | M[i];
|
||
if ((mc != 0) && (!get_yn ("Really truncate memory [N]?", FALSE)))
|
||
return SCPE_OK;
|
||
MEMSIZE = val;
|
||
for (i = MEMSIZE; i < MAXMEMSIZE; i++) M[i] = 0;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Bootstrap routine for CPU */
|
||
|
||
#define BOOT_START 00000
|
||
#define BOOT_LEN (sizeof (boot_rom) / sizeof (int))
|
||
|
||
static const int32 boot_rom[] = {
|
||
0062677, /* IORST ;reset all I/O */
|
||
0060477, /* READS 0 ;read SR into AC0 */
|
||
0024026, /* LDA 1,C77 ;get dev mask */
|
||
0107400, /* AND 0,1 ;isolate dev code */
|
||
0124000, /* COM 1,1 ;- device code - 1 */
|
||
0010014, /* LOOP: ISZ OP1 ;device code to all */
|
||
0010030, /* ISZ OP2 ;I/O instructions */
|
||
0010032, /* ISZ OP3 */
|
||
0125404, /* INC 1,1,SZR ;done? */
|
||
0000005, /* JMP LOOP ;no, increment again */
|
||
0030016, /* LDA 2,C377 ;place JMP 377 into */
|
||
0050377, /* STA 2,377 ;location 377 */
|
||
0060077, /* OP1: 060077 ;start device (NIOS 0) */
|
||
00101102, /* MOVL 0,0,SZC ;test switch 0, low speed? */
|
||
0000377, /* C377: JMP 377 ;no - jmp 377 & wait */
|
||
0004030, /* LOOP2: JSR GET+1 ;get a frame */
|
||
0101065, /* MOVC 0,0,SNR ;is it non-zero? */
|
||
0000017, /* JMP LOOP2 ;no, ignore */
|
||
0004027, /* LOOP4: JSR GET ;yes, get full word */
|
||
0046026, /* STA 1,@C77 ;store starting at 100 */
|
||
/* ;2's complement of word ct */
|
||
0010100, /* ISZ 100 ;done? */
|
||
0000022, /* JMP LOOP4 ;no, get another */
|
||
0000077, /* C77: JMP 77 ;yes location ctr and */
|
||
/* ;jmp to last word */
|
||
0126420, /* GET: SUBZ 1,1 ; clr AC1, set carry */
|
||
/* OP2: */
|
||
0063577, /* LOOP3: 063577 ;done? (SKPDN 0) - 1 */
|
||
0000030, /* JMP LOOP3 ;no -- wait */
|
||
0060477, /* OP3: 060477 ;y -- read in ac0 (DIAS 0,0) */
|
||
0107363, /* ADDCS 0,1,SNC ;add 2 frames swapped - got 2nd? */
|
||
0000030, /* JMP LOOP3 ;no go back after it */
|
||
0125300, /* MOVS 1,1 ;yes swap them */
|
||
0001400, /* JMP 0,3 ;rtn with full word */
|
||
0000000 /* 0 ;padding */
|
||
};
|
||
|
||
t_stat cpu_boot (int32 unitno)
|
||
{
|
||
int32 i;
|
||
extern int32 saved_PC;
|
||
|
||
for (i = 0; i < BOOT_LEN; i++) M[BOOT_START + i] = boot_rom[i];
|
||
saved_PC = BOOT_START;
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Device enable routine */
|
||
|
||
t_stat set_enb (UNIT *uptr, int32 val, char *cptr, void *desc)
|
||
{
|
||
DEVICE *dptr;
|
||
|
||
if (cptr != NULL) return SCPE_ARG;
|
||
if ((uptr == NULL) || (val == 0)) return SCPE_IERR;
|
||
dptr = find_dev_from_unit (uptr);
|
||
if (dptr == NULL) return SCPE_IERR;
|
||
iot_enb = iot_enb | val;
|
||
if (dptr -> reset) dptr -> reset (dptr);
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* Device disable routine */
|
||
|
||
t_stat set_dsb (UNIT *uptr, int32 val, char *cptr, void *desc)
|
||
{
|
||
int32 i;
|
||
DEVICE *dptr;
|
||
UNIT *up;
|
||
|
||
if (cptr != NULL) return SCPE_ARG;
|
||
if ((uptr == NULL) || (val == 0)) return SCPE_IERR;
|
||
dptr = find_dev_from_unit (uptr);
|
||
if (dptr == NULL) return SCPE_IERR;
|
||
for (i = 0; i < dptr -> numunits; i++) { /* check units */
|
||
up = (dptr -> units) + i;
|
||
if ((up -> flags & UNIT_ATT) || sim_is_active (up))
|
||
return SCPE_NOFNC; }
|
||
iot_enb = iot_enb & ~val;
|
||
if (dptr -> reset) dptr -> reset (dptr);
|
||
return SCPE_OK;
|
||
}
|
||
|
||
/* 1-to-1 map for I/O devices */
|
||
|
||
int32 MapAddr (int32 map, int32 addr)
|
||
{
|
||
return addr;
|
||
}
|