df6475181c
1. New Features 1.1 GRI-909 - This is a new simulator for the GRI-909. - It has been hand-tested; so far, no software has been discovered. 1.2 VAX - SET CPU CONHALT will cause a HALT instruction to return to the boot ROM console rather than to SIMH. SET CPU SIMHALT restores the default behavior. - BRB/W self at IPL 1F stops the simulator. This is the default behavior of VMS at exit. 1.3 PDP-18b - ATTACH -A PTR/PTP attaches the reader and punch in ASCII mode. In ASCII mode, the reader automatically sets the high order bit of incoming alphabetic data, and the punch clears the high order bit of outgoing data. 1.4 SCP - DO -V echoes commands from the file as they are executed. - Under Windows, execution priority is set BELOW_NORMAL when the simulator is running. 2. Release Notes 2.1 Bugs Fixed - PDP-11 CPU: fixed updating of MMR0 on a memory management error. - VAX FPA: changed function names to avoid conflict with C math library. - 1401 MT: read end of record generates group mark without word mark. - 1401 DP: fixed address generation and checking. - SCP: an EXIT within a DO command will cause the simulator to exit. 3. In Progress - Interdata 16b/32b: coded, not tested. - SDS 940: coded, not tested. - IBM 1620: coded, not tested. If you would like to help with the debugging of the untested simulators, they can be made available by special request.
924 lines
24 KiB
C
924 lines
24 KiB
C
/* ibms3_sys.c: IBM System/3 system interface
|
||
|
||
(C) Copyright 2001 by Charles E. Owen
|
||
Commercial use prohibited
|
||
*/
|
||
|
||
|
||
#include <ctype.h>
|
||
|
||
#include "s3_defs.h"
|
||
|
||
|
||
extern DEVICE cpu_dev;
|
||
extern DEVICE pkb_dev;
|
||
extern DEVICE cdr_dev;
|
||
extern DEVICE cdp_dev;
|
||
extern DEVICE stack_dev;
|
||
extern DEVICE lpt_dev;
|
||
extern DEVICE r1_dev;
|
||
extern DEVICE f1_dev;
|
||
extern DEVICE r2_dev;
|
||
extern DEVICE f2_dev;
|
||
extern UNIT cpu_unit;
|
||
extern REG cpu_reg[];
|
||
extern unsigned char M[];
|
||
extern int32 saved_PC, IAR[];
|
||
extern char ebcdic_to_ascii[256];
|
||
char *parse_addr(char *cptr, char *gbuf, int32 *addr, int32 *addrtype);
|
||
int32 printf_sym (FILE *of, char *strg, int32 addr, unsigned int32 *val,
|
||
UNIT *uptr, int32 sw);
|
||
|
||
/* SCP data structures
|
||
|
||
sim_name simulator name string
|
||
sim_PC pointer to saved PC register descriptor
|
||
sim_emax number of words needed for examine
|
||
sim_devices array of pointers to simulated devices
|
||
sim_stop_messages array of pointers to stop messages
|
||
sim_load binary loader
|
||
*/
|
||
|
||
char sim_name[] = "System/3";
|
||
|
||
REG *sim_PC = &cpu_reg[0];
|
||
|
||
int32 sim_emax = 6;
|
||
|
||
DEVICE *sim_devices[] = { &cpu_dev,
|
||
&pkb_dev,
|
||
&cdr_dev,
|
||
&cdp_dev,
|
||
&stack_dev,
|
||
&lpt_dev,
|
||
&r1_dev,
|
||
&f1_dev,
|
||
&r2_dev,
|
||
&f2_dev,
|
||
NULL };
|
||
|
||
const char *sim_stop_messages[] = {
|
||
"Unknown error",
|
||
"Unknown I/O Instruction",
|
||
"HALT instruction",
|
||
"Breakpoint",
|
||
"Invalid Opcode",
|
||
"Invalid Qbyte",
|
||
"Invalid Address",
|
||
"Invalid Device Command",
|
||
"ATTN Card Reader"
|
||
};
|
||
|
||
/* This is the opcode master defintion table. Each possible opcode mnemonic
|
||
is defined here, with enough information to translate to and from
|
||
symbolic to binary machine code.
|
||
First field is the opcode's mnemonic
|
||
Second field is the hex of the right nybble of the binary opcode
|
||
Third field is the Q code for those with implicit Q codes
|
||
Fourth field is the symbolic format of the operands:
|
||
0 - (Q-byte),(R-byte)
|
||
1 - (Q-byte),(Address)
|
||
2 - (Address),(Address),(Qbyte)
|
||
3 - (Address),(Qbyte)
|
||
4 - (device),(modifier),(function) -- these 3 make up qbyte
|
||
5 - (device),(modifier),(function),(control)
|
||
6 - (device),(modifier),(function),(Address)
|
||
7 - (displacement) -- Q byte is implicit in opcode
|
||
8 - (address) -- Qbyte is implicit in opcode
|
||
9 - (Address),(Address) -- Qbyte is implicit in opcode
|
||
Fifth Field is the group number:
|
||
0 - Command Group (left op nybble is F)
|
||
1 - One Address Operations A (Left Nybble C, D, or E)
|
||
2 - Two Address Operations (Left Nybble 0,1,2,4,5,6,8,9, or A)
|
||
3 - One Address Operations B (left Nybble 3, 7, or B)
|
||
|
||
There is duplication in this table -- IBM defines different opcodes
|
||
that resolve to the same binary machine instruction -- e.g. JE and
|
||
JZ. On input this is no problem, on output, define the one you
|
||
want to appear first, the second will never appear on output.
|
||
*/
|
||
|
||
int32 nopcode = 75;
|
||
struct opdef opcode[75] = {
|
||
"HPL", 0x00,0,0,0, /* Halt Program Level */
|
||
"A", 0x06,0,1,3, /* Add to Register: A R,AADD */
|
||
"ST", 0x04,0,1,3, /* Store Register */
|
||
"L", 0x05,0,1,3, /* Load Register */
|
||
"LA", 0x02,0,1,1, /* Load Address */
|
||
"ZAZ", 0x04,0,2,2, /* Zero and Add Zoned */
|
||
"AZ", 0x06,0,2,2, /* Add Zoned Decimal */
|
||
"SZ", 0x07,0,2,2, /* Subtract Zoned Decimal */
|
||
"ALC", 0x0E,0,2,2, /* Add Logical: ALC BADD,AADD,LEN */
|
||
"SLC", 0x0F,0,2,2, /* Sub Logical: SLC BADD,AADD,LEN */
|
||
"MVC", 0x0C,0,2,2, /* Move Chars MVX BADD,AADD,LEN */
|
||
"ED", 0x0A,0,2,2, /* Edit: ED BADD,AADD,LEN */
|
||
"ITC", 0x0B,0,2,2, /* Insert Chars: ITC BADD,AADD,LEN */
|
||
"CLC", 0x0D,0,2,2, /* Compare Logical: CLC BADD,AADD,LEN */
|
||
"MVI", 0x0C,0,3,3, /* Move Immediate */
|
||
"SBN", 0x0A,0,3,3, /* Set Bits On */
|
||
"SBF", 0x0B,0,3,3, /* Set Bits Off */
|
||
"CLI", 0x0D,0,3,3, /* Compare Immediate */
|
||
"TBN", 0x08,0,3,3, /* Test Bits On */
|
||
"TBF", 0x09,0,3,3, /* Test Bits Off */
|
||
"APL", 0x01,0,4,0, /* Advance Program Level */
|
||
"SIO", 0x03,0,5,0, /* Start I/O */
|
||
"SNS", 0x00,0,6,3, /* Sense I/O */
|
||
"LIO", 0x01,0,6,3, /* Load I/O */
|
||
"TIO", 0x01,0,6,1, /* Test I/O */
|
||
"J", 0x02,0,7,0, /* Jump Unconditional */
|
||
"J", 0x02,0x87,7,0, /* Alternate J */
|
||
"JH", 0x02,132,7,0, /* Jump if High */
|
||
"JL", 0x02,130,7,0, /* Jump if Low */
|
||
"JE", 0x02,129,7,0, /* Jump if Equal */
|
||
"JNH", 0x02,4,7,0, /* Jump if Not High */
|
||
"JNL", 0x02,2,7,0, /* Jump if Not Low */
|
||
"JNE", 0x02,1,7,0, /* Jump if Not Equal */
|
||
"JOZ", 0x02,136,7,0, /* Jump if Overflow Zoned */
|
||
"JOL", 0x02,160,7,0, /* Jump if Overflow Logical */
|
||
"JNOZ", 0x02,8,7,0, /* Jump if No Overflow Zoned */
|
||
"JNOL", 0x02,32,7,0, /* Jump if No Overflow Logical */
|
||
"JT", 0x02,16,7,0, /* Jump if True */
|
||
"JF", 0x02,144,7,0, /* Jump if False */
|
||
"JP", 0x02,132,7,0, /* Jump if Plus */
|
||
"JM", 0x02,130,7,0, /* Jump if Minus */
|
||
"JZ", 0x02,129,7,0, /* Jump if Zero */
|
||
"JNP", 0x02,4,7,0, /* Jump if Not Plus */
|
||
"JNM", 0x02,2,7,0, /* Jump if Not Minus */
|
||
"JNZ", 0x02,1,7,0, /* Jump if Not Zero */
|
||
"NOPJ", 0x02,0x80,7,0, /* Never Jump - NOP */
|
||
"B", 0x00,0x00,8,1, /* Branch Unconditional */
|
||
"B", 0x00,0x87,8,1, /* Alternate B */
|
||
"BH", 0x00,0x84,8,1, /* Branch if High */
|
||
"BL", 0x00,0x82,8,1, /* Branch if Low */
|
||
"BE", 0x00,0x81,8,1, /* Branch if Equal */
|
||
"BNH", 0x00,0x04,8,1, /* Branch if Not High */
|
||
"BNL", 0x00,0x02,8,1, /* Branch if Not Low */
|
||
"BNE", 0x00,0x01,8,1, /* Branch if Not Equal */
|
||
"BOZ", 0x00,0x88,8,1, /* Branch if Overflow Zoned */
|
||
"BOL", 0x00,0xA0,8,1, /* Branch if Overflow Logical */
|
||
"BNOZ", 0x00,0x08,8,1, /* Branch if No Overflow Zoned */
|
||
"BNOL", 0x00,0x20,8,1, /* Branch if No Overflow Logical */
|
||
"BT", 0x00,0x10,8,1, /* Branch if True */
|
||
"BF", 0x00,0x90,8,1, /* Branch if False */
|
||
"BP", 0x00,0x84,8,1, /* Branch if Plus */
|
||
"BM", 0x00,0x82,8,1, /* Branch if Minus */
|
||
"BZ", 0x00,0x81,8,1, /* Branch if Zero */
|
||
"BNP", 0x00,0x04,8,1, /* Branch if Not Plus */
|
||
"BNM", 0x00,0x02,8,1, /* Branch if Not Minus */
|
||
"BNZ", 0x00,0x01,8,1, /* Branch if Not Zero */
|
||
"NOPB", 0x00,0x80,8,1, /* Never Branch - NOP */
|
||
"MZZ", 0x08,0,9,2, /* Move Zone to Zone */
|
||
"MNZ", 0x08,1,9,2, /* Move Numeric to Zone */
|
||
"MZN", 0x08,2,9,2, /* Move Zone to Numeric */
|
||
"MNN", 0x08,3,9,2, /* Move Numeric to Numeric */
|
||
"MVX", 0x08,0,2,2, /* Move Hex: MVX BADD,AADD,CODE */
|
||
"JC", 0x02,0,3,0, /* Jump on Specified Condition bits */
|
||
"BC", 0x00,0,3,1, /* Branch on Specified Condition */
|
||
"***", 0x00,0,0,0
|
||
};
|
||
|
||
int32 regcode[15] = { 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01,
|
||
0x80, 0xC0, 0xA0, 0x90, 0x88, 0x84, 0x82, 0x81 };
|
||
|
||
char regname[15][8] = { "(P2IAR)",
|
||
"(P1IAR)",
|
||
"(IAR)",
|
||
"(ARR)",
|
||
"(PSR)",
|
||
"(XR2)",
|
||
"(XR1)",
|
||
"(IAR0)",
|
||
"(IAR1)",
|
||
"(IAR2)",
|
||
"(IAR3)",
|
||
"(IAR4)",
|
||
"(IAR5)",
|
||
"(IAR6)",
|
||
"(IAR7)" };
|
||
|
||
/* This is the binary loader. The input file is considered to be
|
||
a string of literal bytes with no special format. The
|
||
load starts at the current value of the P1IAR.
|
||
*/
|
||
|
||
int32 sim_load (FILE *fileref, char *cptr, char *fnam, int flag)
|
||
{
|
||
int32 i, addr = 0, cnt = 0;
|
||
|
||
if ((*cptr != 0) || (flag != 0)) return SCPE_ARG;
|
||
addr = IAR[8];
|
||
while ((i = getc (fileref)) != EOF) {
|
||
M[addr] = i & 0xff;
|
||
addr++;
|
||
cnt++;
|
||
} /* end while */
|
||
printf ("%d Bytes loaded.\n", cnt);
|
||
return (SCPE_OK);
|
||
}
|
||
|
||
/* Symbolic output
|
||
|
||
Inputs:
|
||
*of = output stream
|
||
addr = current PC
|
||
*val = pointer to values
|
||
*uptr = pointer to unit
|
||
sw = switches
|
||
Outputs:
|
||
status = error code
|
||
*/
|
||
|
||
int32 fprint_sym (FILE *of, int32 addr, unsigned int32 *val,
|
||
UNIT *uptr, int32 sw)
|
||
{
|
||
int32 r;
|
||
char strg[256];
|
||
|
||
strcpy(strg, "");
|
||
r = printf_sym(of, strg, addr, val, uptr, sw);
|
||
if (sw & SWMASK ('A'))
|
||
strcpy(strg, "");
|
||
else
|
||
fprintf(of, "%s", strg);
|
||
return (r);
|
||
}
|
||
|
||
int32 printf_sym (FILE *of, char *strg, int32 addr, unsigned int32 *val,
|
||
UNIT *uptr, int32 sw)
|
||
{
|
||
int32 cflag, c1, c2, group, len1, len2, inst, aaddr, baddr;
|
||
int32 oplen, groupno, i, j, vpos, qbyte, da, m, n;
|
||
char bld[128], bldaddr[32], boperand[32], aoperand[32];
|
||
int32 blk[16], blt[16];
|
||
int32 blkadd;
|
||
|
||
cflag = (uptr == NULL) || (uptr == &cpu_unit);
|
||
c1 = val[0] & 0xff;
|
||
if (sw & SWMASK ('A')) {
|
||
for (i = 0; i < 16; i++) {
|
||
blkadd = addr + (i*16);
|
||
for (j = 0; j < 16; j++) {
|
||
blk[j] = M[blkadd+j] & 0xff;
|
||
c2 = ebcdic_to_ascii[blk[j]];
|
||
if (c2 < 040 || c2 > 0177 || blk[j] == 07) {
|
||
blt[j] = '.';
|
||
} else {
|
||
blt[j] = c2;
|
||
}
|
||
}
|
||
if (i == 0) {
|
||
fprintf(of, "%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X [%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c]\n ",
|
||
blk[0], blk[1], blk[2], blk[3], blk[4], blk[5], blk[6], blk[7],
|
||
blk[8], blk[9], blk[10], blk[11], blk[12], blk[13], blk[14], blk[15],
|
||
blt[0], blt[1], blt[2], blt[3], blt[4], blt[5], blt[6], blt[7],
|
||
blt[8], blt[9], blt[10], blt[11], blt[12], blt[13], blt[14], blt[15]);
|
||
} else {
|
||
fprintf(of, "%X\t%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X [%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c]\n ",
|
||
blkadd, blk[0], blk[1], blk[2], blk[3], blk[4], blk[5], blk[6], blk[7],
|
||
blk[8], blk[9], blk[10], blk[11], blk[12], blk[13], blk[14], blk[15],
|
||
blt[0], blt[1], blt[2], blt[3], blt[4], blt[5], blt[6], blt[7],
|
||
blt[8], blt[9], blt[10], blt[11], blt[12], blt[13], blt[14], blt[15]);
|
||
}
|
||
}
|
||
return SCPE_OK; }
|
||
if (sw & SWMASK ('C')) {
|
||
c2 = ebcdic_to_ascii[c1];
|
||
if (c2 < 040 || c2 > 0177) {
|
||
sprintf(strg, "<%02X>", c1 & 0xff);
|
||
} else {
|
||
sprintf (strg, "%c", c2 & 0xff);
|
||
}
|
||
return SCPE_OK; }
|
||
if (!(sw & SWMASK ('M'))) return SCPE_ARG;
|
||
|
||
inst = val[0] & 0x0f;
|
||
len1 = (val[0] >> 6) & 3;
|
||
len2 = (val[0] >> 4) & 3;
|
||
group = (val[0] >> 4) & 0x0f;
|
||
qbyte = val[1];
|
||
|
||
/* Get total length of instruction */
|
||
|
||
if (group == 0x0f) {
|
||
oplen = 3;
|
||
} else {
|
||
oplen = 2;
|
||
if (len1 == 0) oplen += 2;
|
||
if (len1 == 1 || len1 == 2) oplen++;
|
||
if (len2 == 0) oplen += 2;
|
||
if (len2 == 1 || len2 == 2) oplen++;
|
||
}
|
||
|
||
/* Find which group it belongs to */
|
||
|
||
switch (group) {
|
||
case 0x0f:
|
||
groupno = 0;
|
||
break;
|
||
case 0x0c:
|
||
case 0x0d:
|
||
case 0x0e:
|
||
groupno = 1;
|
||
break;
|
||
case 0x03:
|
||
case 0x07:
|
||
case 0x0b:
|
||
groupno = 3;
|
||
break;
|
||
default:
|
||
groupno = 2;
|
||
break;
|
||
}
|
||
|
||
/* find the table entry */
|
||
|
||
for (i = 0; i < nopcode; i++) {
|
||
if (opcode[i].form < 7) { /* Explicit Q */
|
||
if (opcode[i].group == groupno &&
|
||
opcode[i].opmask == inst) break;
|
||
} else { /* Implicit Q */
|
||
if (opcode[i].group == groupno &&
|
||
opcode[i].opmask == inst &&
|
||
opcode[i].q == qbyte) break;
|
||
}
|
||
}
|
||
|
||
/* print the opcode */
|
||
|
||
if (i >= nopcode) {
|
||
sprintf(strg, "%02X", val[0]);
|
||
oplen = 1;
|
||
} else {
|
||
sprintf(bld, "%s ", opcode[i].op);
|
||
|
||
/* Extract the addresses into aaddr and baddr */
|
||
|
||
strcpy(aoperand, "ERROR");
|
||
strcpy(boperand, "ERROR");
|
||
vpos = 2;
|
||
aaddr = baddr = 0;
|
||
switch (len1) {
|
||
case 0:
|
||
baddr = ((val[vpos] << 8) & 0xff00) | (val[vpos + 1] & 0x00ff);
|
||
sprintf(boperand, "%04X", baddr);
|
||
vpos = 4;
|
||
break;
|
||
case 1:
|
||
baddr = val[vpos] & 255;
|
||
sprintf(boperand, "(%02X,XR1)", baddr);
|
||
vpos = 3;
|
||
break;
|
||
case 2:
|
||
baddr = val[vpos] & 255;
|
||
sprintf(boperand, "(%02X,XR2)", baddr);
|
||
vpos = 3;
|
||
break;
|
||
default:
|
||
baddr = 0;
|
||
break;
|
||
}
|
||
switch (len2) {
|
||
case 0:
|
||
aaddr = ((val[vpos] << 8) & 0xff00) | (val[vpos + 1] & 0x00ff);
|
||
if (group == 0x0C || group == 0x0D || group == 0x0E)
|
||
sprintf(boperand, "%04X", aaddr);
|
||
else
|
||
sprintf(aoperand, "%04X", aaddr);
|
||
break;
|
||
case 1:
|
||
aaddr = val[vpos] & 255;
|
||
if (group == 0x0C || group == 0x0D || group == 0x0E)
|
||
sprintf(boperand, "(%02X,XR1)", aaddr);
|
||
else
|
||
sprintf(aoperand, "(%02X,XR1)", aaddr);
|
||
break;
|
||
case 2:
|
||
aaddr = val[vpos] & 255;
|
||
if (group == 0x0C || group == 0x0D || group == 0x0E)
|
||
sprintf(boperand, "(%02X,XR2)", aaddr);
|
||
else
|
||
sprintf(aoperand, "(%02X,XR2)", aaddr);
|
||
break;
|
||
default:
|
||
aaddr = 0;
|
||
break;
|
||
}
|
||
|
||
/* Display the operands in the correct format */
|
||
|
||
da = (qbyte >> 4) & 0x0f;
|
||
m = (qbyte >> 3) & 0x01;
|
||
n = (qbyte) & 0x07;
|
||
|
||
switch (opcode[i].form) {
|
||
case 0:
|
||
sprintf(bldaddr, "%02X,%02X", qbyte, val[2]);
|
||
break;
|
||
case 1:
|
||
if (inst == 2 || inst == 4 || inst == 5 || inst == 6) {
|
||
for (i = 0; i < 16; i++) {
|
||
if (regcode[i] == qbyte)
|
||
break;
|
||
}
|
||
if (i < 16) {
|
||
sprintf(bldaddr, "%s,%s", regname[i], boperand);
|
||
} else {
|
||
sprintf(bldaddr, "%02X,%s", qbyte, boperand);
|
||
}
|
||
} else {
|
||
sprintf(bldaddr, "%02X,%s", qbyte, boperand);
|
||
}
|
||
break;
|
||
case 2:
|
||
if (inst > 9 || inst == 4 || inst == 6 || inst == 7)
|
||
qbyte++; /* special +1 for length display */
|
||
sprintf(bldaddr, "%s,%s,%d", boperand, aoperand, qbyte);
|
||
break;
|
||
case 3:
|
||
if (strcmp(opcode[i].op, "JC") == 0) {
|
||
sprintf(bldaddr, "%04X,%02X", addr+oplen+val[2], qbyte);
|
||
} else {
|
||
sprintf(bldaddr, "%s,%02X", boperand, qbyte);
|
||
}
|
||
break;
|
||
case 4:
|
||
sprintf(bldaddr, "%d,%d,%d", da, m, n);
|
||
break;
|
||
case 5:
|
||
sprintf(bldaddr, "%d,%d,%d,%02X", da, m, n, val[2]);
|
||
break;
|
||
case 6:
|
||
sprintf(bldaddr, "%d,%d,%d,%s", da, m, n, boperand);
|
||
break;
|
||
case 7:
|
||
sprintf(bldaddr, "%04X", addr+oplen+val[2]);
|
||
break;
|
||
case 8:
|
||
sprintf(bldaddr, "%s", boperand);
|
||
break;
|
||
default:
|
||
sprintf(bldaddr, "%s,%s", boperand, aoperand);
|
||
break;
|
||
}
|
||
sprintf(strg, "%s%s", bld, bldaddr);
|
||
}
|
||
|
||
return -(oplen - 1);
|
||
}
|
||
|
||
/* Symbolic input
|
||
|
||
Inputs:
|
||
*cptr = pointer to input string
|
||
addr = current PC
|
||
*uptr = pointer to unit
|
||
*val = pointer to output values
|
||
sw = switches
|
||
Outputs:
|
||
status = error status
|
||
*/
|
||
|
||
int32 parse_sym (char *cptr, int32 addr, UNIT *uptr, unsigned int32 *val, int32 sw)
|
||
{
|
||
int32 cflag, i = 0, j, r, oplen, addtyp, saveaddr, vptr;
|
||
char gbuf[CBUFSIZE];
|
||
|
||
cflag = (uptr == NULL) || (uptr == &cpu_unit);
|
||
while (isspace (*cptr)) cptr++; /* absorb spaces */
|
||
if ((sw & SWMASK ('A')) || ((*cptr == '\'') && cptr++)) { /* ASCII char? */
|
||
if (cptr[0] == 0) return SCPE_ARG; /* must have 1 char */
|
||
val[0] = (unsigned int) cptr[0];
|
||
return SCPE_OK; }
|
||
if ((sw & SWMASK ('C')) || ((*cptr == '"') && cptr++)) { /* ASCII string? */
|
||
if (cptr[0] == 0) return SCPE_ARG; /* must have 1 char */
|
||
val[0] = ((unsigned int) cptr[0] << 8) + (unsigned int) cptr[1];
|
||
return SCPE_OK; }
|
||
|
||
/* An instruction: get opcode (all characters until null, comma, left paren,
|
||
or numeric (including spaces).
|
||
*/
|
||
|
||
while (1) {
|
||
if (*cptr == ',' || *cptr == '\0' || *cptr == '(' ||
|
||
isdigit(*cptr))
|
||
break;
|
||
gbuf[i] = toupper(*cptr);
|
||
cptr++;
|
||
i++;
|
||
}
|
||
|
||
/* kill trailing spaces if any */
|
||
gbuf[i] = '\0';
|
||
for (j = i - 1; gbuf[j] == ' '; j--) {
|
||
gbuf[j] = '\0';
|
||
}
|
||
|
||
/* find opcode in table */
|
||
for (j = 0; j < nopcode; j++) {
|
||
if (strcmp(gbuf, opcode[j].op) == 0)
|
||
break;
|
||
}
|
||
if (j >= nopcode) /* not found */
|
||
return SCPE_ARG;
|
||
|
||
oplen = 2; /* start with op & q */
|
||
|
||
val[0] = opcode[j].opmask; /* store opcode right nybble */
|
||
|
||
switch (opcode[j].form) { /* Get operands based on operand format */
|
||
case 0: /* Single Byte Operand */
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ','); /* Get Q Byte */
|
||
sscanf(gbuf, "%x", &r);
|
||
val[1] = r;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0); /* Get R Byte */
|
||
sscanf(gbuf, "%x", &r);
|
||
val[2] = r;
|
||
oplen = 3;
|
||
val[0] = 0xf0 | opcode[j].opmask;
|
||
break;
|
||
case 1:
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
if (opcode[j].opmask == 2 ||
|
||
opcode[j].opmask == 4 ||
|
||
opcode[j].opmask == 5 ||
|
||
opcode[j].opmask == 6) {
|
||
if (isdigit(gbuf[0])) {
|
||
sscanf(gbuf, "%x", &r);
|
||
} else {
|
||
for (i = 0; i < 16; i++) {
|
||
if (strcmp(gbuf, regname[i]) == 0)
|
||
break;
|
||
}
|
||
if (i < 16) {
|
||
r = regcode[i];
|
||
} else {
|
||
return SCPE_ARG;
|
||
}
|
||
}
|
||
} else {
|
||
sscanf(gbuf, "%x", &r);
|
||
}
|
||
if (r > 255) return SCPE_ARG;
|
||
val[1] = r;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[2] = (addr >> 8) & 0x00ff;
|
||
val[3] = addr & 0xff;
|
||
oplen = 4;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xC0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0x30 | opcode[j].opmask;
|
||
break;
|
||
case 1:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xD0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0x70 | opcode[j].opmask;
|
||
break;
|
||
case 2:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xE0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0xB0 | opcode[j].opmask;
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
break;
|
||
case 2:
|
||
oplen = 2;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[2] = (addr >> 8) & 0xff;
|
||
val[3] = addr & 0xff;
|
||
oplen += 2;
|
||
vptr = 4;
|
||
val[0] = 0x00 | opcode[j].opmask;
|
||
break;
|
||
case 1:
|
||
val[2] = addr & 0xff;
|
||
oplen += 1;
|
||
vptr = 3;
|
||
val[0] = 0x40 | opcode[j].opmask;
|
||
break;
|
||
case 2:
|
||
val[2] = addr & 0xff;
|
||
oplen += 1;
|
||
vptr = 3;
|
||
val[0] = 0x80 | opcode[j].opmask;
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
if (*cptr == ',') cptr++;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[vptr] = (addr >> 8) & 0xff;
|
||
val[vptr+1] = addr & 0xff;
|
||
oplen += 2;
|
||
break;
|
||
case 1:
|
||
val[vptr] = addr & 0xff;
|
||
oplen += 1;
|
||
val[0] = 0x10 | val[0];
|
||
break;
|
||
case 2:
|
||
val[vptr] = addr & 0xff;
|
||
oplen += 1;
|
||
val[0] = 0x20 | val[0];
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0);
|
||
sscanf(gbuf, "%d", &r);
|
||
if (opcode[j].opmask > 9 ||
|
||
opcode[j].opmask == 4 ||
|
||
opcode[j].opmask == 6 ||
|
||
opcode[j].opmask == 7) r--; /* special: length -1 */
|
||
val[1] = r;
|
||
if (*cptr == ',') cptr++;
|
||
break;
|
||
case 3:
|
||
saveaddr = addr;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
if (opcode[j].group == 0) { /* Group 0 form 3 is JC with explicit Q */
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0);
|
||
sscanf(gbuf, "%x", &r);
|
||
if ((addr - (saveaddr+3)) > 255 || (addr - (saveaddr+3)) < 1)
|
||
return SCPE_ARG;
|
||
val[2] = addr - (saveaddr+3);
|
||
val[1] = r;
|
||
val[0] = 0xf0 | opcode[j].opmask;
|
||
oplen = 3;
|
||
|
||
} else {
|
||
val[2] = (addr >> 8) & 0x00ff;
|
||
val[3] = addr & 0xff;
|
||
oplen = 4;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xC0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0x30 | opcode[j].opmask;
|
||
}
|
||
break;
|
||
case 1:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xD0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0x70 | opcode[j].opmask;
|
||
break;
|
||
case 2:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xE0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0xB0 | opcode[j].opmask;
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0);
|
||
sscanf(gbuf, "%x", &r);
|
||
if (r > 255) return SCPE_ARG;
|
||
val[1] = r;
|
||
break;
|
||
case 4:
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 15) return SCPE_ARG;
|
||
val[1] = (r << 4) & 0xf0;
|
||
val[0] = 0xf0 | opcode[j].opmask;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 1) return SCPE_ARG;
|
||
val[1] |= (r << 3) & 0x08;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0);
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 7) return SCPE_ARG;
|
||
val[1] |= r & 0x07;
|
||
val[2] = 0;
|
||
oplen = 3;
|
||
break;
|
||
case 5:
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 15) return SCPE_ARG;
|
||
val[1] = (r << 4) & 0xf0;
|
||
val[0] = 0xf0 | opcode[j].opmask;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 1) return SCPE_ARG;
|
||
val[1] |= (r << 3) & 0x08;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 7) return SCPE_ARG;
|
||
val[1] |= r & 0x07;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0);
|
||
sscanf(gbuf, "%x", &r);
|
||
if (r > 255) return SCPE_ARG;
|
||
val[2] = r;
|
||
oplen = 3;
|
||
break;
|
||
case 6:
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 15) return SCPE_ARG;
|
||
val[1] = (r << 4) & 0xf0;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 1) return SCPE_ARG;
|
||
val[1] |= (r << 3) & 0x08;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
sscanf(gbuf, "%d", &r);
|
||
if (r > 7) return SCPE_ARG;
|
||
val[1] |= r & 0x07;
|
||
if (*cptr == ',') cptr++;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[2] = (addr >> 8) & 0x00ff;
|
||
val[3] = addr & 0xff;
|
||
oplen = 4;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xC0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0x30 | opcode[j].opmask;
|
||
break;
|
||
case 1:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xD0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0x70 | opcode[j].opmask;
|
||
break;
|
||
case 2:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
if (opcode[j].group == 1)
|
||
val[0] = 0xE0 | opcode[j].opmask;
|
||
else
|
||
val[0] = 0xB0 | opcode[j].opmask;
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
break;
|
||
case 7:
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, 0);
|
||
sscanf(gbuf, "%x", &r);
|
||
if ((r - (addr+3)) > 255 || (r - (addr+3)) < 1) return SCPE_ARG;
|
||
val[2] = r - (addr+3);
|
||
val[1] = opcode[j].q;
|
||
val[0] = 0xf0 | opcode[j].opmask;
|
||
oplen = 3;
|
||
break;
|
||
|
||
case 8:
|
||
if (*cptr == ',') cptr++;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[2] = (addr >> 8) & 0x00ff;
|
||
val[3] = addr & 0xff;
|
||
oplen = 4;
|
||
val[0] = 0xC0 | opcode[j].opmask;
|
||
break;
|
||
case 1:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
val[0] = 0xD0 | opcode[j].opmask;
|
||
break;
|
||
case 2:
|
||
val[2] = addr & 0xff;
|
||
oplen = 3;
|
||
val[0] = 0xE0 | opcode[j].opmask;
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
val[1] = opcode[j].q;
|
||
break;
|
||
case 9:
|
||
oplen = 2;
|
||
val[0] = 0;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[2] = (addr >> 8) & 0xff;
|
||
val[3] = addr & 0xff;
|
||
oplen += 2;
|
||
vptr = 4;
|
||
val[0] = 0x00 | opcode[j].opmask;
|
||
break;
|
||
case 1:
|
||
val[2] = addr & 0xff;
|
||
oplen += 1;
|
||
vptr = 3;
|
||
val[0] = 0x40 | opcode[j].opmask;
|
||
break;
|
||
case 2:
|
||
val[2] = addr & 0xff;
|
||
oplen += 1;
|
||
vptr = 3;
|
||
val[0] = 0x80 | opcode[j].opmask;
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
if (*cptr == ',') cptr++;
|
||
cptr = parse_addr(cptr, gbuf, &addr, &addtyp);
|
||
switch(addtyp) {
|
||
case 0:
|
||
val[vptr] = (addr >> 8) & 0xff;
|
||
val[vptr+1] = addr & 0xff;
|
||
oplen += 2;
|
||
break;
|
||
case 1:
|
||
val[vptr] = addr & 0xff;
|
||
oplen += 1;
|
||
val[0] = 0x10 | val[0];
|
||
break;
|
||
case 2:
|
||
val[vptr] = addr & 0xff;
|
||
oplen += 1;
|
||
val[0] = 0x20 | val[0];
|
||
break;
|
||
default:
|
||
return SCPE_ARG;
|
||
break;
|
||
}
|
||
val[1] = opcode[j].q;
|
||
break;
|
||
default:
|
||
break;
|
||
}
|
||
|
||
|
||
return (-(oplen-1));
|
||
}
|
||
|
||
char *parse_addr(char *cptr, char *gbuf, int32 *addr, int32 *addrtype)
|
||
{
|
||
int32 nybble = 0;
|
||
char temp[32];
|
||
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
if (gbuf[0] == '(') { /* XR relative */
|
||
strcpy(temp, gbuf+1);
|
||
sscanf(temp, "%x", addr);
|
||
if (*cptr == ',') cptr++;
|
||
cptr = get_glyph(cptr, gbuf, ',');
|
||
nybble = -1;
|
||
if (strcmp(gbuf, "XR1)") == 0)
|
||
nybble = 1;
|
||
if (strcmp(gbuf, "XR2)") == 0)
|
||
nybble = 2;
|
||
} else { /* Direct */
|
||
sscanf(gbuf, "%x", addr);
|
||
nybble = 0;
|
||
}
|
||
*addrtype = nybble;
|
||
return cptr;
|
||
}
|
||
|