simh-testsetgenerator/Interdata/id_lp.c
Bob Supnik 26aa6de663 Notes For V3.2-0
RESTRICTION: The PDP-15 FPP is only partially debugged.  Do NOT
enable this feature for normal operations.

WARNING: The core simulator files (scp.c, sim_*.c) have been
reorganized.  Unzip V3.2-0 to an empty directory before attempting
to compile the source.

IMPORTANT: If you are compiling for UNIX, please read the notes
for Ethernet very carefully.  You may need to download a new
version of the pcap library, or make changes to the makefile,
to get Ethernet support to work.

1. New Features in 3.2-0

1.1 SCP and libraries

- Added SHOW <device> RADIX command.
- Added SHOW <device> MODIFIERS command.
- Added SHOW <device> NAMES command.
- Added SET/SHOW <device> DEBUG command.
- Added sim_vm_parse_addr and sim_vm_fprint_addr optional interfaces.
- Added REG_VMAD flag.
- Split SCP into separate libraries for easier modification.
- Added more room to the device and unit flag fields.
- Changed terminal multiplexor library to support unlimited.
  number of async lines.

1.2 All DECtapes

- Added STOP_EOR flag to enable end-of-reel error stop
- Added device debug support.

1.3 Nova and Eclipse

- Added QTY and ALM multiplexors (Bruce Ray).

1.4 LGP-30

- Added LGP-30/LGP-21 simulator.

1.5 PDP-11

- Added format, address increment inhibit, transfer overrun
  detection to RK.
- Added device debug support to HK, RP, TM, TQ, TS.
- Added DEUNA/DELUA (XU) support (Dave Hittner).
- Add DZ per-line logging.

1.6 18b PDP's

- Added support for 1-4 (PDP-9)/1-16 (PDP-15) additional
  terminals.

1.7 PDP-10

- Added DEUNA/DELUA (XU) support (Dave Hittner).

1.8 VAX

- Added extended memory to 512MB (Mark Pizzolato).
- Added RXV21 support.

2. Bugs Fixed in 3.2-0

2.1 SCP

- Fixed double logging of SHOW BREAK (found by Mark Pizzolato).
- Fixed implementation of REG_VMIO.

2.2 Nova and Eclipse

- Fixed device enable/disable support (found by Bruce Ray).

2.3 PDP-1

- Fixed bug in LOAD (found by Mark Crispin).

2.4 PDP-10

- Fixed bug in floating point unpack.
- Fixed bug in FIXR (found by Phil Stone, fixed by Chris Smith).

2.6 PDP-11

- Fixed bug in RQ interrupt control (found by Tom Evans).

2.6 PDP-18B

- Fixed bug in PDP-15 XVM g_mode implementation.
- Fixed bug in PDP-15 indexed address calculation.
- Fixed bug in PDP-15 autoindexed address calculation.
- Fixed bugs in FPP-15 instruction decode.
- Fixed clock response to CAF.
- Fixed bug in hardware read-in mode bootstrap.
- Fixed PDP-15 XVM instruction decoding errors.

2.7 VAX

- Fixed PC read fault in EXTxV.
- Fixed PC write fault in INSV.
2011-04-15 08:34:26 -07:00

290 lines
9.4 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* id_lp.c: Interdata line printer
Copyright (c) 2001-2004, Robert M. Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
lpt M46-206 line printer
25-Apr-03 RMS Revised for extended file support
*/
#include "id_defs.h"
#include <ctype.h>
/* Device definitions */
#define UNIT_V_UC (UNIT_V_UF + 0) /* UC only */
#define UNIT_UC (1 << UNIT_V_UC)
#define SPC_BASE 0x40 /* spacing base */
#define VFU_BASE 0x78 /* VFU base */
#define VFU_WIDTH 0x8 /* VFU width */
#define LF 0xA
#define VT 0xB
#define VT_VFU 4 /* VFU chan for VT */
#define FF 0xC
#define FF_VFU 8 /* VFU chan for FF */
#define CR 0xD
#define VFUP(ch,val) ((val) & (1 << (ch))) /* VFU chan test */
/* Status byte, * = dynamic */
#define STA_PAPE 0x40 /* *paper empty */
#define STA_MASK (STA_BSY) /* static status */
uint32 lpt_sta = STA_BSY; /* status */
char lpxb[LPT_WIDTH + 1]; /* line buffer */
uint32 lpt_bptr = 0; /* buf ptr */
uint32 lpt_spnd = 0; /* space pending */
uint32 lpt_vfup = 0; /* VFU ptr */
uint32 lpt_vful = 1; /* VFU lnt */
uint8 lpt_vfut[VFU_LNT] = { 0xFF }; /* VFU tape */
uint32 lpt_arm = 0; /* int armed */
int32 lpt_ctime = 10; /* char time */
int32 lpt_stime = 1000; /* space time */
int32 lpt_stopioe = 0; /* stop on err */
extern uint32 int_req[INTSZ], int_enb[INTSZ];
DEVICE lpt_dev;
uint32 lpt (uint32 dev, uint32 op, uint32 dat);
t_stat lpt_svc (UNIT *uptr);
t_stat lpt_reset (DEVICE *dptr);
t_stat lpt_attach (UNIT *uptr, char *cptr);
t_stat lpt_bufout (UNIT *uptr);
t_stat lpt_vfu (UNIT *uptr, int32 ch);
t_stat lpt_spc (UNIT *uptr, int32 cnt);
/* LPT data structures
lpt_dev LPT device descriptor
lpt_unit LPT unit descriptors
lpt_reg LPT register list
*/
DIB lpt_dib = { d_LPT, -1, v_LPT, NULL, &lpt, NULL };
UNIT lpt_unit = { UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_UC, 0) };
REG lpt_reg[] = {
{ HRDATA (STA, lpt_sta, 8) },
{ HRDATA (BUF, lpt_unit.buf, 7) },
{ BRDATA (DBUF, lpxb, 16, 7, LPT_WIDTH) },
{ HRDATA (DBPTR, lpt_bptr, 8) },
{ HRDATA (VFUP, lpt_vfup, 8) },
{ HRDATA (VFUL, lpt_vful, 8) },
{ BRDATA (VFUT, lpt_vfut, 16, 8, VFU_LNT) },
{ FLDATA (IREQ, int_req[l_LPT], i_LPT) },
{ FLDATA (IENB, int_enb[l_LPT], i_LPT) },
{ FLDATA (IARM, lpt_arm, 0) },
{ DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },
{ DRDATA (CTIME, lpt_ctime, 24), PV_LEFT },
{ DRDATA (STIME, lpt_stime, 24), PV_LEFT },
{ FLDATA (STOP_IOE, lpt_stopioe, 0) },
{ HRDATA (DEVNO, lpt_dib.dno, 8), REG_HRO },
{ NULL } };
MTAB lpt_mod[] = {
{ UNIT_UC, 0, "lower case", "LC", NULL },
{ UNIT_UC, UNIT_UC, "upper case", "UC", NULL },
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
&set_dev, &show_dev, NULL },
{ 0 } };
DEVICE lpt_dev = {
"LPT", &lpt_unit, lpt_reg, lpt_mod,
1, 10, 31, 1, 16, 7,
NULL, NULL, &lpt_reset,
NULL, &lpt_attach, NULL,
&lpt_dib, DEV_DISABLE };
/* Line printer: IO routine */
uint32 lpt (uint32 dev, uint32 op, uint32 dat)
{
int32 t;
switch (op) { /* case IO op */
case IO_ADR: /* select */
return BY; /* byte only */
case IO_OC: /* command */
lpt_arm = int_chg (v_LPT, dat, lpt_arm); /* upd int ctrl */
break;
case IO_WD: /* write */
t = lpt_unit.buf = dat & 0x7F; /* mask char */
lpt_sta = STA_BSY; /* set busy */
if (lpt_spnd || ((t >= LF) && (t <= CR))) /* space op? */
sim_activate (&lpt_unit, lpt_stime);
else sim_activate (&lpt_unit, lpt_ctime); /* normal char */
break;
case IO_SS: /* status */
t = lpt_sta & STA_MASK; /* status byte */
if ((lpt_unit.flags & UNIT_ATT) == 0) /* test paper out */
t = t | STA_EX | STA_PAPE | STA_BSY;
return t; }
return 0;
}
/* Unit service */
t_stat lpt_svc (UNIT *uptr)
{
int32 t;
t_stat r = SCPE_OK;
lpt_sta = 0; /* clear busy */
if (lpt_arm) SET_INT (v_LPT); /* armed? intr */
if ((uptr->flags & UNIT_ATT) == 0) /* attached? */
return IORETURN (lpt_stopioe, SCPE_UNATT);
t = uptr->buf; /* get character */
if (lpt_spnd || ((t >= LF) && (t < CR))) { /* spc pend or spc op? */
lpt_spnd = 0;
if (lpt_bufout (uptr) != SCPE_OK) return SCPE_IOERR; /* print */
if ((t == 1) || (t == LF)) lpt_spc (uptr, 1); /* single space */
else if (t == VT) r = lpt_vfu (uptr, VT_VFU - 1); /* VT->VFU */
else if (t == 0xC) r = lpt_vfu (uptr, FF_VFU - 1); /* FF->VFU */
else if ((t >= SPC_BASE) && (t < VFU_BASE))
lpt_spc (uptr, t - SPC_BASE); /* space */
else if ((t >= VFU_BASE) && (t < VFU_BASE + VFU_WIDTH))
r = lpt_vfu (uptr, t - VFU_BASE); /* VFU */
else fputs ("\r", uptr->fileref); /* overprint */
uptr->pos = ftell (uptr->fileref); /* update position */
if (ferror (lpt_unit.fileref)) {
perror ("LPT I/O error");
clearerr (uptr->fileref);
return SCPE_IOERR; } }
else if (t == CR) { /* CR? */
lpt_spnd = 1; /* set spc pend */
return lpt_bufout (uptr); } /* print line */
else if (t >= 0x40) { /* printable? */
if ((uptr->flags & UNIT_UC) && islower (t)) /* UC only? */
t = toupper (t);
if (lpt_bptr < LPT_WIDTH) lpxb[lpt_bptr++] = t; }
return r;
}
/* Printing and spacing routines */
t_stat lpt_bufout (UNIT *uptr)
{
int32 i;
t_stat r = SCPE_OK;
if (lpt_bptr == 0) return SCPE_OK; /* any char in buf? */
for (i = LPT_WIDTH - 1; (i >= 0) && (lpxb[i] == ' '); i--)
lpxb[i] = 0; /* backscan line */
if (lpxb[0]) { /* any char left? */
fputs (lpxb, uptr->fileref); /* write line */
lpt_unit.pos = ftell (uptr->fileref); /* update position */
if (ferror (uptr->fileref)) {
perror ("LPT I/O error");
clearerr (uptr->fileref);
r = SCPE_IOERR; } }
lpt_bptr = 0; /* reset buffer */
for (i = 0; i < LPT_WIDTH; i++) lpxb[i] = ' ';
lpxb[LPT_WIDTH] = 0;
return r;
}
t_stat lpt_vfu (UNIT *uptr, int32 ch)
{
uint32 i, j;
if ((ch == (FF_VFU - 1)) && VFUP (ch, lpt_vfut[0])) { /* top of form? */
fputs ("\n\f", uptr->fileref); /* nl + ff */
lpt_vfup = 0; /* top of page */
return SCPE_OK; }
for (i = 1; i < lpt_vful + 1; i++) { /* sweep thru cct */
lpt_vfup = (lpt_vfup + 1) % lpt_vful; /* adv pointer */
if (VFUP (ch, lpt_vfut[lpt_vfup])) { /* chan punched? */
for (j = 0; j < i; j++) fputc ('\n', uptr->fileref);
return SCPE_OK; } }
return STOP_VFU; /* runaway channel */
}
t_stat lpt_spc (UNIT *uptr, int32 cnt)
{
int32 i;
if (cnt == 0) fputc ('\r', uptr->fileref);
else { for (i = 0; i < cnt; i++) fputc ('\n', uptr->fileref);
lpt_vfup = (lpt_vfup + cnt) % lpt_vful; }
return SCPE_OK;
}
/* Reset routine */
t_stat lpt_reset (DEVICE *dptr)
{
int32 i;
sim_cancel (&lpt_unit); /* deactivate */
lpt_sta = 0; /* clr busy */
lpt_bptr = 0; /* clr buf ptr */
for (i = 0; i < LPT_WIDTH; i++) lpxb[i] = ' '; /* clr buf */
lpxb[LPT_WIDTH] = 0;
CLR_INT (v_LPT); /* clearr int */
CLR_ENB (v_LPT); /* disable int */
lpt_arm = 0; /* disarm int */
return SCPE_OK;
}
/* Attach routine */
t_stat lpt_attach (UNIT *uptr, char *cptr)
{
lpt_vfup = 0; /* top of form */
return attach_unit (uptr, cptr);
}
/* Carriage control load routine */
t_stat lp_load (FILE *fileref, char *cptr, char *fnam)
{
int32 col, ptr, mask, vfubuf[VFU_LNT];
uint32 rpt;
t_stat r;
char cbuf[CBUFSIZE], gbuf[CBUFSIZE];
if (*cptr != 0) return SCPE_ARG;
ptr = 0;
for ( ; (cptr = fgets (cbuf, CBUFSIZE, fileref)) != NULL; ) { /* until eof */
mask = 0;
if (*cptr == '(') { /* repeat count? */
cptr = get_glyph (cptr + 1, gbuf, ')'); /* get 1st field */
rpt = get_uint (gbuf, 10, VFU_LNT, &r); /* repeat count */
if (r != SCPE_OK) return SCPE_FMT; }
else rpt = 1;
while (*cptr != 0) { /* get col no's */
cptr = get_glyph (cptr, gbuf, ','); /* get next field */
col = get_uint (gbuf, 10, 7, &r); /* column number */
if (r != SCPE_OK) return SCPE_FMT;
mask = mask | (1 << col); } /* set bit */
for ( ; rpt > 0; rpt--) { /* store vals */
if (ptr >= VFU_LNT) return SCPE_FMT;
vfubuf[ptr++] = mask; } }
if (ptr == 0) return SCPE_FMT;
lpt_vful = ptr;
lpt_vfup = 0;
for (rpt = 0; rpt < lpt_vful; rpt++) lpt_vfut[rpt] = vfubuf[rpt];
return SCPE_OK;
}