simh-testsetgenerator/Interdata/id_tt.c
Bob Supnik 4ffd3be790 Notes For V3.0-0
Because some key files have changed, V3.0 should be unzipped to a
clean directory.

1. New Features in 3.0-0

1.1 SCP and Libraries

- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support

1.2 All magtapes

- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
  the -F switch.

1.3 VAX

- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
  files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).

2. Bugs Fixed in 3.01-0

2.1 VAX

- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
  o First and second operands reversed
  o Separated fraction received wrong exponent
  o Overflow calculation on separated integer incorrect
  o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
  fast host processors (fixes from Mark Pizzolato).

2.2 1401

- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.

2.3 Nova

- Fixed DSK variable size interaction with restore.

2.4 PDP-1

- Fixed DT variable size interaction with restore.

2.5 PDP-11

- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
  o Corrected XQ interrupts on IE state transition (code by Tom Evans).
  o Added XQ interrupt clear on soft reset.
  o Removed XQ interrupt when setting XL or RL (multiple people).
  o Added SET/SHOW XQ STATS.
  o Added SHOW XQ FILTERS.
  o Added ability to split received packet into multiple buffers.
  o Added explicit runt and giant packet processing.

2.6 PDP-18B

- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.

2.7 PDP-8

- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.

2.8 HP2100

- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.

2.9 GRI

- Fixed bug in SC queue pointer management.

3. New Features in 3.0 vs prior releases

N/A

4. Bugs Fixed in 3.0 vs prior releases

N/A

5. General Notes

WARNING: The RESTORE command has changed.  RESTORE will now
detach an attached file on a unit, if that unit did not have
an attached file in the saved configuration.  This is required
to assure that the unit flags and the file state are consistent.

WARNING: The compilation scheme for the PDP-10, PDP-11, and VAX
has changed.  Use one of the supplied build files, or read the
documentation carefully, before compiling any of these simulators.
2011-04-15 08:34:08 -07:00

260 lines
8.8 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* id_tt.c: Interdata teletype
Copyright (c) 2000-2003, Robert M. Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
tt console
25-Apr-03 RMS Revised for extended file support
11-Jan-03 RMS Added TTP support
22-Dec-02 RMS Added break support
*/
#include "id_defs.h"
#include <ctype.h>
#define UNIT_V_8B (UNIT_V_UF + 0) /* 8B */
#define UNIT_V_KSR (UNIT_V_UF + 1) /* KSR33 */
#define UNIT_8B (1 << UNIT_V_8B)
#define UNIT_KSR (1 << UNIT_V_KSR)
/* Device definitions */
#define TTI 0
#define TTO 1
#define STA_OVR 0x80 /* overrun */
#define STA_BRK 0x20 /* break */
#define STA_MASK (STA_OVR | STA_BRK | STA_BSY) /* status mask */
#define SET_EX (STA_OVR | STA_BRK) /* set EX */
#define CMD_V_FDPX 4 /* full/half duplex */
#define CMD_V_RD 2 /* read/write */
extern uint32 int_req[INTSZ], int_enb[INTSZ];
uint32 tt_sta = STA_BSY; /* status */
uint32 tt_fdpx = 1; /* tt mode */
uint32 tt_rd = 1, tt_chp = 0; /* tt state */
uint32 tt_arm = 0; /* int arm */
uint32 tt (uint32 dev, uint32 op, uint32 dat);
t_stat tti_svc (UNIT *uptr);
t_stat tto_svc (UNIT *uptr);
t_stat tt_reset (DEVICE *dptr);
t_stat tt_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat tt_set_break (UNIT *uptr, int32 val, char *cptr, void *desc);
t_stat tt_set_enbdis (UNIT *uptr, int32 val, char *cptr, void *desc);
/* TT data structures
tt_dev TT device descriptor
tt_unit TT unit descriptors
tt_reg TT register list
tt_mod TT modifiers list
*/
DIB tt_dib = { d_TT, -1, v_TT, NULL, &tt, NULL };
UNIT tt_unit[] = {
{ UDATA (&tti_svc, UNIT_KSR, 0), KBD_POLL_WAIT },
{ UDATA (&tto_svc, UNIT_KSR, 0), SERIAL_OUT_WAIT }
};
REG tt_reg[] = {
{ HRDATA (STA, tt_sta, 8) },
{ HRDATA (KBUF, tt_unit[TTI].buf, 8) },
{ DRDATA (KPOS, tt_unit[TTI].pos, T_ADDR_W), PV_LEFT },
{ DRDATA (KTIME, tt_unit[TTI].wait, 24), REG_NZ + PV_LEFT },
{ HRDATA (TBUF, tt_unit[TTO].buf, 8) },
{ DRDATA (TPOS, tt_unit[TTO].pos, T_ADDR_W), PV_LEFT },
{ DRDATA (TTIME, tt_unit[TTO].wait, 24), REG_NZ + PV_LEFT },
{ FLDATA (IREQ, int_req[l_TT], i_TT) },
{ FLDATA (IENB, int_enb[l_TT], i_TT) },
{ FLDATA (IARM, tt_arm, 0) },
{ FLDATA (RD, tt_rd, 0) },
{ FLDATA (FDPX, tt_fdpx, 0) },
{ FLDATA (CHP, tt_chp, 0) },
{ HRDATA (DEVNO, tt_dib.dno, 8), REG_HRO },
{ NULL } };
MTAB tt_mod[] = {
{ UNIT_KSR+UNIT_8B, UNIT_KSR, "KSR", "KSR", &tt_set_mode },
{ UNIT_KSR+UNIT_8B, 0 , "7b" , "7B" , &tt_set_mode },
{ UNIT_KSR+UNIT_8B, UNIT_8B , "8b" , "8B" , &tt_set_mode },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, 0, NULL, "ENABLED",
&tt_set_enbdis, NULL, NULL },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, DEV_DIS, NULL, "DISABLED",
&tt_set_enbdis, NULL, NULL },
{ MTAB_XTD|MTAB_VDV|MTAB_NMO, 0, NULL, "BREAK",
&tt_set_break, NULL, NULL },
{ MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
&set_dev, &show_dev, &tt_dib },
{ 0 } };
DEVICE tt_dev = {
"TT", tt_unit, tt_reg, tt_mod,
2, 10, 31, 1, 16, 8,
NULL, NULL, &tt_reset,
NULL, NULL, NULL,
&tt_dib, 0 };
/* Terminal: IO routine */
uint32 tt (uint32 dev, uint32 op, uint32 dat)
{
uint32 old_rd, t;
switch (op) { /* case IO op */
case IO_ADR: /* select */
return BY; /* byte only */
case IO_OC: /* command */
old_rd = tt_rd;
tt_arm = int_chg (v_TT, dat, tt_arm); /* upd int ctrl */
tt_fdpx = io_2b (dat, CMD_V_FDPX, tt_fdpx); /* upd full/half */
tt_rd = io_2b (dat, CMD_V_RD, tt_rd); /* upd rd/write */
if (tt_rd != old_rd) { /* rw change? */
if (tt_rd? tt_chp: !sim_is_active (&tt_unit[TTO])) {
tt_sta = 0; /* busy = 0 */
if (tt_arm) SET_INT (v_TT); } /* req intr */
else {
tt_sta = STA_BSY; /* busy = 1 */
CLR_INT (v_TT); } } /* clr int */
else tt_sta = tt_sta & ~STA_OVR; /* clr ovflo */
break;
case IO_RD: /* read */
tt_chp = 0; /* clear pend */
if (tt_rd) tt_sta = (tt_sta | STA_BSY) & ~STA_OVR;
return (tt_unit[TTI].buf & 0xFF);
case IO_WD: /* write */
tt_unit[TTO].buf = dat & 0xFF; /* save char */
if (!tt_rd) tt_sta = tt_sta | STA_BSY; /* set busy */
sim_activate (&tt_unit[TTO], tt_unit[TTO].wait);
break;
case IO_SS: /* status */
t = tt_sta & STA_MASK; /* get status */
if (t & SET_EX) t = t | STA_EX; /* test for EX */
return t; }
return 0;
}
/* Unit service routines */
t_stat tti_svc (UNIT *uptr)
{
int32 out, temp;
sim_activate (uptr, uptr->wait); /* continue poll */
tt_sta = tt_sta & ~STA_BRK; /* clear break */
if ((temp = sim_poll_kbd ()) < SCPE_KFLAG) return temp; /* no char or error? */
if (tt_rd) { /* read mode? */
tt_sta = tt_sta & ~STA_BSY; /* clear busy */
if (tt_arm) SET_INT (v_TT); /* if armed, intr */
if (tt_chp) tt_sta = tt_sta | STA_OVR; } /* got char? overrun */
tt_chp = 1; /* char pending */
out = temp & 0x7F; /* echo is 7B */
if (temp & SCPE_BREAK) { /* break? */
tt_sta = tt_sta | STA_BRK; /* set status */
uptr->buf = 0; } /* no character */
else if (uptr->flags & UNIT_KSR) { /* KSR mode? */
if (islower (out)) out = toupper (out); /* cvt to UC */
uptr->buf = out | 0x80; } /* set high bit */
else uptr->buf = temp & ((tt_unit[TTI].flags & UNIT_8B)? 0xFF: 0x7F);
uptr->pos = uptr->pos + 1; /* incr count */
if (!tt_fdpx) { /* half duplex? */
if (out) sim_putchar (out); /* write char */
tt_unit[TTO].pos = tt_unit[TTO].pos + 1; }
return SCPE_OK;
}
t_stat tto_svc (UNIT *uptr)
{
int32 ch;
t_stat r;
if (!tt_rd) { /* write mode? */
tt_sta = tt_sta & ~STA_BSY; /* clear busy */
if (tt_arm) SET_INT (v_TT); } /* if armed, intr */
if (uptr->flags & UNIT_KSR) { /* KSR mode? */
ch = uptr->buf & 0x7F; /* mask to 7b */
if (islower (ch)) ch = toupper (ch); } /* cvt to UC */
else ch = uptr->buf & ((tt_unit[TTO].flags & UNIT_8B)? 0xFF: 0x7F);
if (!(uptr->flags & UNIT_8B) && /* KSR or 7b? */
((ch == 0) || (ch == 0x7F))) return SCPE_OK; /* supr NULL, DEL */
if ((r = sim_putchar (ch)) != SCPE_OK) return r; /* output */
uptr->pos = uptr->pos + 1; /* incr count */
return SCPE_OK;
}
/* Reset routine */
t_stat tt_reset (DEVICE *dptr)
{
if (dptr->flags & DEV_DIS) sim_cancel (&tt_unit[TTI]); /* dis? cancel poll */
else sim_activate (&tt_unit[TTI], tt_unit[TTI].wait); /* activate input */
sim_cancel (&tt_unit[TTO]); /* cancel output */
tt_rd = tt_fdpx = 1; /* read, full duplex */
tt_chp = 0; /* no char */
tt_sta = STA_BSY; /* buffer empty */
CLR_INT (v_TT); /* clear int */
CLR_ENB (v_TT); /* disable int */
tt_arm = 0; /* disarm int */
return SCPE_OK;
}
/* Make mode flags uniform */
t_stat tt_set_mode (UNIT *uptr, int32 val, char *cptr, void *desc)
{
tt_unit[TTI].flags = (tt_unit[TTI].flags & ~(UNIT_KSR | UNIT_8B)) | val;
tt_unit[TTO].flags = (tt_unit[TTO].flags & ~(UNIT_KSR | UNIT_8B)) | val;
return SCPE_OK;
}
/* Set input break */
t_stat tt_set_break (UNIT *uptr, int32 val, char *cptr, void *desc)
{
if (tt_dev.flags & DEV_DIS) return SCPE_NOFNC;
tt_sta = tt_sta | STA_BRK;
if (tt_rd) { /* read mode? */
tt_sta = tt_sta & ~STA_BSY; /* clear busy */
if (tt_arm) SET_INT (v_TT); } /* if armed, intr */
sim_cancel (&tt_unit[TTI]); /* restart TT poll */
sim_activate (&tt_unit[TTI], tt_unit[TTI].wait); /* so brk is seen */
return SCPE_OK;
}
/* Set enabled/disabled */
t_stat tt_set_enbdis (UNIT *uptr, int32 val, char *cptr, void *desc)
{
extern DEVICE ttp_dev;
extern t_stat ttp_reset (DEVICE *dptr);
tt_dev.flags = (tt_dev.flags & ~DEV_DIS) | val;
ttp_dev.flags = (ttp_dev.flags & ~DEV_DIS) | (val ^ DEV_DIS);
tt_reset (&tt_dev);
ttp_reset (&ttp_dev);
return SCPE_OK;
}