simh-testsetgenerator/SDS/sds_rad.c
Bob Supnik 4ffd3be790 Notes For V3.0-0
Because some key files have changed, V3.0 should be unzipped to a
clean directory.

1. New Features in 3.0-0

1.1 SCP and Libraries

- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support

1.2 All magtapes

- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
  the -F switch.

1.3 VAX

- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
  files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).

2. Bugs Fixed in 3.01-0

2.1 VAX

- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
  o First and second operands reversed
  o Separated fraction received wrong exponent
  o Overflow calculation on separated integer incorrect
  o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
  fast host processors (fixes from Mark Pizzolato).

2.2 1401

- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.

2.3 Nova

- Fixed DSK variable size interaction with restore.

2.4 PDP-1

- Fixed DT variable size interaction with restore.

2.5 PDP-11

- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
  o Corrected XQ interrupts on IE state transition (code by Tom Evans).
  o Added XQ interrupt clear on soft reset.
  o Removed XQ interrupt when setting XL or RL (multiple people).
  o Added SET/SHOW XQ STATS.
  o Added SHOW XQ FILTERS.
  o Added ability to split received packet into multiple buffers.
  o Added explicit runt and giant packet processing.

2.6 PDP-18B

- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.

2.7 PDP-8

- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.

2.8 HP2100

- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.

2.9 GRI

- Fixed bug in SC queue pointer management.

3. New Features in 3.0 vs prior releases

N/A

4. Bugs Fixed in 3.0 vs prior releases

N/A

5. General Notes

WARNING: The RESTORE command has changed.  RESTORE will now
detach an attached file on a unit, if that unit did not have
an attached file in the saved configuration.  This is required
to assure that the unit flags and the file state are consistent.

WARNING: The compilation scheme for the PDP-10, PDP-11, and VAX
has changed.  Use one of the supplied build files, or read the
documentation carefully, before compiling any of these simulators.
2011-04-15 08:34:08 -07:00

290 lines
9.8 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* sds_rad.c: SDS 940 fixed head disk simulator
Copyright (c) 2001-2003, Robert M. Supnik
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Robert M Supnik shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from Robert M Supnik.
rad fixed head disk
The fixed head disk is a head-per-track disk, with up to four disks. Each
disk is divided into two logical units. Reads and writes cannot cross logical
unit boundaries. The fixed head disk transfers 12b characters, rather than 6b
characters. To minimize overhead, the disk is buffered in memory.
*/
#include "sds_defs.h"
#include <math.h>
/* Constants */
#define RAD_NUMWD 64 /* words/sector */
#define RAD_NUMSC 64 /* sectors/track */
#define RAD_NUMTR 64 /* tracks/log unit */
#define RAD_NUMLU 8 /* log units/ctrl */
#define RAD_SCSIZE (RAD_NUMLU*RAD_NUMTR*RAD_NUMSC) /* sectors/disk */
#define RAD_AMASK (RAD_SCSIZE - 1) /* sec addr mask */
#define RAD_SIZE (RAD_SCSIZE * RAD_NUMWD) /* words/disk */
#define RAD_GETLUN(x) ((x) / (RAD_NUMTR * RAD_NUMSC))
#define RAD_SCMASK (RAD_NUMSC - 1) /* sector mask */
#define RAD_TRSCMASK ((RAD_NUMSC * RAD_NUMTR) - 1) /* track/sec mask */
#define GET_SECTOR(x) ((int) fmod (sim_gtime() / ((double) (x)), \
((double) RAD_NUMSC)))
extern uint32 xfr_req;
extern uint32 alert;
extern int32 stop_invins, stop_invdev, stop_inviop;
int32 rad_err = 0; /* error */
int32 rad_nobi = 0; /* !incr x track */
int32 rad_da = 0; /* disk address */
int32 rad_sba = 0; /* sec byte addr */
int32 rad_wrp = 0; /* write prot */
int32 rad_time = 2; /* time per 12b */
int32 rad_stopioe = 1; /* stop on error */
DSPT rad_tplt[] = { /* template */
{ 1, 0 }, { 1, DEV_OUT }, { 0, 0 } };
DEVICE rad_dev;
t_stat rad_svc (UNIT *uptr);
t_stat rad_reset (DEVICE *dptr);
t_stat rad_fill (int32 sba);
void rad_end_op (int32 fl);
int32 rad_adjda (int32 sba, int32 inc);
t_stat rad (uint32 fnc, uint32 inst, uint32 *dat);
/* RAD data structures
rad_dev device descriptor
rad_unit unit descriptor
rad_reg register list
*/
DIB rad_dib = { CHAN_E, DEV_RAD, XFR_RAD, rad_tplt, &rad };
UNIT rad_unit =
{ UDATA (&rad_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF,
RAD_SIZE) };
REG rad_reg[] = {
{ ORDATA (DA, rad_da, 15) },
{ GRDATA (SA, rad_sba, 8, 6, 1) },
{ FLDATA (BP, rad_sba, 0) },
{ FLDATA (XFR, xfr_req, XFR_V_RAD) },
{ FLDATA (NOBD, rad_nobi, 0) },
{ FLDATA (ERR, rad_err, 0) },
{ ORDATA (PROT, rad_wrp, 8) },
{ DRDATA (TIME, rad_time, 24), REG_NZ + PV_LEFT },
{ FLDATA (STOP_IOE, rad_stopioe, 0) },
{ NULL } };
MTAB rad_mod[] = {
{ MTAB_XTD|MTAB_VDV, 0, "CHANNEL", "CHANNEL",
&set_chan, &show_chan, NULL },
{ 0 } };
DEVICE rad_dev = {
"RAD", &rad_unit, rad_reg, rad_mod,
1, 8, 21, 1, 8, 24,
NULL, NULL, &rad_reset,
NULL, NULL, NULL,
&rad_dib, DEV_DISABLE };
/* Fixed head disk routine
conn - inst = EOM0, dat = NULL
eom1 - inst = EOM1, dat = NULL
sks - inst = SKS, dat = ptr to result
disc - inst = device number, dat = NULL
wreor - inst = device number, dat = NULL
read - inst = device number, dat = ptr to data
write - inst = device number, dat = ptr to result
*/
t_stat rad (uint32 fnc, uint32 inst, uint32 *dat)
{
int32 t, lun, new_ch;
uint32 *wptr;
uint32 p;
switch (fnc) { /* case function */
case IO_CONN: /* connect */
new_ch = I_GETEOCH (inst); /* get new chan */
if (new_ch != rad_dib.chan) return SCPE_IERR; /* wrong chan? */
if (CHC_GETCPW (inst) > 1) return STOP_INVIOP; /* 1-2 char/word? */
if (sim_is_active (&rad_unit) || (alert == POT_RADA)) /* protocol viol? */
return STOP_INVIOP;
rad_err = 0; /* clr error */
rad_sba = 0; /* clr sec bptr */
chan_set_flag (rad_dib.chan, CHF_12B); /* 12B mode */
t = (rad_da & RAD_SCMASK) - GET_SECTOR (rad_time * RAD_NUMWD);
if (t <= 0) t = t + RAD_NUMSC; /* seek */
sim_activate (&rad_unit, t * rad_time * (RAD_NUMWD / 2));
xfr_req = xfr_req & ~XFR_RAD; /* clr xfr flg */
break;
case IO_EOM1: /* EOM mode 1 */
new_ch = I_GETEOCH (inst); /* get new chan */
if (new_ch != rad_dib.chan) return SCPE_IERR; /* wrong chan? */
if ((inst & 00600) == 00200) alert = POT_RADS; /* alert for sec */
else if ((inst & 06600) == 0) { /* alert for addr */
if (sim_is_active (&rad_unit)) rad_err = 1; /* busy? */
else {
rad_nobi = (inst & 01000)? 1: 0; /* save inc type */
alert = POT_RADA; } } /* set alert */
break;
case IO_DISC: /* disconnect */
rad_end_op (0); /* normal term */
if (inst & DEV_OUT) return rad_fill (rad_sba); /* fill write */
break;
case IO_WREOR: /* write eor */
rad_end_op (CHF_EOR); /* eor term */
return rad_fill (rad_sba); /* fill write */
case IO_SKS: /* SKS */
new_ch = I_GETSKCH (inst); /* sks chan */
if (new_ch != rad_dib.chan) return SCPE_IERR; /* wrong chan? */
t = I_GETSKCND (inst); /* sks cond */
lun = RAD_GETLUN (rad_da);
if (((t == 000) && !sim_is_active (&rad_unit)) || /* 10026: ready */
((t == 004) && !rad_err) || /* 11026: !err */
((t == 014) && !(rad_wrp & (1 << lun)))) /* 13026: !wrprot */
*dat = 1;
break;
case IO_READ: /* read */
p = (rad_da * RAD_NUMWD) + (rad_sba >> 1); /* buf wd addr */
xfr_req = xfr_req & ~XFR_RAD; /* clr xfr req */
if ((rad_unit.flags & UNIT_BUF) == 0) { /* not buffered? */
rad_end_op (CHF_ERR | CHF_EOR); /* set rad err */
CRETIOE (rad_stopioe, SCPE_UNATT); }
if (p >= rad_unit.capac) { /* end of disk? */
rad_end_op (CHF_ERR | CHF_EOR); /* set rad err */
return SCPE_OK; }
wptr = ((uint32 *) rad_unit.filebuf) + p; /* ptr to word */
if (rad_sba & 1) *dat = *wptr & 07777; /* odd byte? */
else *dat = (*wptr >> 12) & 07777; /* even */
rad_sba = rad_adjda (rad_sba, 1); /* next byte */
break;
case IO_WRITE:
p = (rad_da * RAD_NUMWD) + (rad_sba >> 1);
xfr_req = xfr_req & ~XFR_RAD; /* clr xfr req */
if ((rad_unit.flags & UNIT_BUF) == 0) { /* not buffered? */
rad_end_op (CHF_ERR | CHF_EOR); /* set rad err */
CRETIOE (rad_stopioe, SCPE_UNATT); }
if ((p >= rad_unit.capac) || /* end of disk? */
(rad_wrp & (1 << RAD_GETLUN (rad_da)))) { /* write prot? */
rad_end_op (CHF_ERR | CHF_EOR); /* set rad err */
return SCPE_OK; }
wptr = ((uint32 *) rad_unit.filebuf) + p; /* ptr to word */
if (rad_sba & 1) *wptr = *wptr | (*dat & 07777); /* odd byte? */
else *wptr = (*dat & 07777) << 12; /* even */
if (p >= rad_unit.hwmark) rad_unit.hwmark = p + 1; /* mark hiwater */
rad_sba = rad_adjda (rad_sba, 1); /* next byte */
break;
default:
CRETINS; }
return SCPE_OK;
}
/* PIN routine */
t_stat pin_rads (uint32 num, uint32 *dat)
{
*dat = GET_SECTOR (rad_time * RAD_NUMWD); /* ret curr sec */
return SCPE_OK;
}
/* POT routine */
t_stat pot_rada (uint32 num, uint32 *dat)
{
rad_da = (*dat) & RAD_AMASK; /* save dsk addr */
return SCPE_OK;
}
/* Unit service and read/write */
t_stat rad_svc (UNIT *uptr)
{
xfr_req = xfr_req | XFR_RAD; /* set xfr req */
sim_activate (&rad_unit, rad_time); /* activate */
return SCPE_OK;
}
/* Fill incomplete sector */
t_stat rad_fill (int32 sba)
{
uint32 p = rad_da * RAD_NUMWD;
int32 wa = (sba + 1) >> 1; /* whole words */
if (sba && (p < rad_unit.capac)) { /* fill needed? */
for ( ; wa < RAD_NUMWD; wa++)
*(((uint32 *) rad_unit.filebuf) + p + wa) = 0;
if ((p + wa) >= rad_unit.hwmark) rad_unit.hwmark = p + wa + 1;
rad_adjda (sba, RAD_NUMWD - 1); } /* inc da */
return SCPE_OK;
}
/* Adjust disk address */
int32 rad_adjda (int32 sba, int32 inc)
{
sba = sba + inc;
if (rad_sba >= (RAD_NUMWD * 2)) { /* next sector? */
if (rad_nobi) rad_da = (rad_da & ~RAD_SCMASK) + /* within band? */
((rad_da + 1) & RAD_SCMASK);
else rad_da = (rad_da & ~RAD_TRSCMASK) + /* cross band */
((rad_da + 1) & RAD_TRSCMASK);
sba = 0; } /* start new sec */
return sba;
}
/* Terminate disk operation */
void rad_end_op (int32 fl)
{
if (fl) chan_set_flag (rad_dib.chan, fl); /* set flags */
xfr_req = xfr_req & ~XFR_RAD; /* clear xfr */
sim_cancel (&rad_unit); /* stop */
if (fl & CHF_ERR) { /* error? */
chan_disc (rad_dib.chan); /* disconnect */
rad_err = 1; } /* set rad err */
return;
}
/* Reset routine */
t_stat rad_reset (DEVICE *dptr)
{
chan_disc (rad_dib.chan); /* disconnect */
rad_nobi = 0; /* clear state */
rad_da = 0;
rad_sba = 0;
xfr_req = xfr_req & ~XFR_RAD; /* clr xfr req */
sim_cancel (&rad_unit); /* deactivate */
return SCPE_OK;
}