Mark Pizzolato
03bbd66cef
vax610_defs.h, vax610_stddev.c - Added SHOW CPU LEDS and SHOW CPU MODEL to the cpu_mod array using the CPU_MODEL_MODIFIERS #define.
...
- Added dynamic display of the LED values to the console port as the LEDs change during a boot.
2012-11-05 15:56:56 -08:00
Mark Pizzolato
2481a8e148
vax_cpu.c, vax_cpu.h Added optional per CPU #define of CPU_MODEL_MODIFIERS which would be defined in vaxXXX_defs.h and be added to the cpu_mod array.
2012-11-05 15:54:13 -08:00
Mark Pizzolato
0b1b5f1ede
scp.c - Added a 'set prompt "XXX"' command to change the prompt which is used while scp collects command input.
2012-11-05 15:14:00 -08:00
Mark Pizzolato
f1e3216d99
Added MicroVAX I network boot support
...
pdp11_xq.c, pdp11_xq.h
- Added emulation and visibility to the LEDs which were on the physical DEQNA/DELQA network boards. "show xq: will now display the LED state in addition to the other useful things.
- Added debugging of loopback packet data
- Avoided padding on short loopback packets
- Added support for extended length loopback packets (up to 1600 bytes) which is described in the DEQNA manual and used by the MicroVAX I boot ROM. Recieve such packets with the LONG error indicator.
- Returned 'reserved' status bits as 1's in received packet status word 1.
- Added debug display of transmit and receive Buffer Descriptor List contents.
sim_ether.c, sim_ether.h
- Added support for extended/oversized packets.
2012-11-05 15:12:36 -08:00
Mark Pizzolato
69666f1480
Fixed message reporting after command completion:
...
scp.c,scp.h - Gave priority to a command message handler to determine what values result in displayed messages and exported run_cmd_message for use by simulators which add simulator specific BOOT commands which leverage the run_cmd logic and should also leverage the run_cmd_message for message display
VAX/vax610_sysdev.c, vax730_sys.c, vax750_cmi.c, vax780_sbi.c - Added BOOT command message dispatch to run_cmd_message for simulators which perform preprocessing on BOOT activities but otherwise then dispatch to run_cmd.
2012-10-31 10:09:04 -07:00
Mark Pizzolato
8b59f2a12a
sim_tmxr.c - Fixed behavior when I/O errors happen on serial port connections. Now a message is displayed and the serial port is closed as opposed to the prior behavior where messages would be spewed incessantly with no benefit.
2012-10-27 12:50:50 -07:00
Mark Pizzolato
22eda8f959
descrip.mms - Fixed VMS build of VAX610
2012-10-26 15:31:57 -07:00
Mark Pizzolato
7a09222d51
vax610_sysdev.c, vax750_cmi.c - Added missing register definition to store the cpu_boot_cmd during a SAVE/RESTORE.
2012-10-26 07:55:23 -07:00
Mark Pizzolato
b356a98ea9
hp2100_ipl.c - Removed DEV_NET to allow restoration of listening ports
2012-10-26 05:02:44 -07:00
Mark Pizzolato
1d0c0fc07d
makefile - added OSX build support for VDE2 when the MacPorts vde2 package is installed
2012-10-25 15:59:42 -07:00
Mark Pizzolato
f2fdee9a8e
makefile - Fixed reporting of GCC version when compiling with MinGW
2012-10-25 12:16:49 -07:00
Mark Pizzolato
d6f3d328e4
vax750_uba.c - Minor compiler warning cleanup
2012-10-25 11:59:45 -07:00
Mark Pizzolato
76612265ca
Addition of MicroVAX I (VAX610) processor simulator from Matt Burke
2012-10-25 11:58:10 -07:00
Mark Pizzolato
ef147d2058
HP2100 fixes to avoid potential namespace clashes with names defined in unistd.h. (Dave Bryan)
2012-10-24 12:57:37 -07:00
Mark Pizzolato
99f042f7dc
scp.c - Fixed RESTORE command to detach all attached devices before actually restoring. The goal here is to make restore behavior consistent without regard to the current VM state prior to the restore.
2012-10-24 12:56:03 -07:00
Mark Pizzolato
9411f3f4bd
Added missing comments for HP2100 multiplexer source modules (Dave Bryan)
2012-10-24 12:53:55 -07:00
Mark Pizzolato
5cd9449b29
sim_defs.h fixed compile on VMS
2012-10-23 14:41:26 -07:00
Mark Pizzolato
15e648f560
sim_tmxr.c Fixed console behaviors the console is directed to a serial port.
2012-10-23 14:40:56 -07:00
Mark Pizzolato
1fda1b1708
scp.h, sim_console.h, sim_console.c - Changed SET CONSOLE DEBUG= and SET CONSOLE NODEBUG to enable/disable debugging for the console device
2012-10-23 14:37:19 -07:00
Mark Pizzolato
c2f03a7541
scp.c - Finished merge from master branch - addition of SET DEFAULT and SHOW DEFAULT command.
...
- Added CD and PWD commands as aliases of SET DEFAULT and SHOW DEFAULT
2012-10-23 14:23:45 -07:00
Mark Pizzolato
388e13eb3a
sim_serial.c Fixed VMS serial code after testing.
2012-10-22 14:58:56 -07:00
Mark Pizzolato
3311f4d581
sim_serial.c Added initial serial support for VMS hosts
2012-10-22 09:07:45 -07:00
Mark Pizzolato
cc7049cc39
Updated vax780_doc.doc and vax_doc.doc to describe current TODR operation and use
2012-10-22 06:57:30 -07:00
Mark Pizzolato
9cd3a07ff6
Merge remote-tracking branch 'origin/master' into Extra-VAXen
...
Merged related functionality into new VAX 750 modules
Cleaned up compiler complaints from the clang compiler
2012-10-22 06:32:38 -07:00
Mark Pizzolato
f8e34b103b
Added new VAX750 simulator from Matt Burke
2012-10-22 05:09:10 -07:00
Mark Pizzolato
9421d3cc75
Added missing documentation files from Bob Supnik.
...
simh.doc Writing a Simulator for the SIMH System
sim_breakpoints.doc The SIMH Breakpoint Subsystem
sim_vmio.doc Adding An I/O Device To A SIMH Virtual Machine
2012-10-20 07:47:03 -07:00
Mark Pizzolato
757969ef40
Fixed bugs found during testing by Mark Benson
...
sim_serial.c
- Fixed error message printing when retry is merely needed
sim_tmxr.c
- Fixed parsing to properly recognize a listen port argument of "nnn;notelnet".
- Fixed buffer wrap output condition.
2012-10-20 07:46:29 -07:00
Mark Pizzolato
0a46da5aa0
Changed pdp11_dz to leverage the tmxr library's pass thru modem control capabilities.
...
Fixed reporting of DCD for dz lines beyond the first 4.
2012-10-17 14:17:14 -07:00
Mark Pizzolato
02cb620c9b
Change to support serial ports on multiplexer devices without any changes to existing multiplexer device emulation code.
...
Added support for per line tcp listen ports.
Added support for per line outgoing tcp/telnet connections.
Removed DEV_NET from pdp11_dz and pdp11_vh emulators to allow proper restore of
2012-10-17 08:40:01 -07:00
Mark Pizzolato
24696892fd
Merge branch 'DMC11' into SerialMux
...
Conflicts:
scp.c
sim_ether.c
sim_ether.h
sim_tmxr.c
2012-10-16 15:50:38 -07:00
Mark Pizzolato
35b8a40559
Revised the VAX780 to include the pdp11_dmc device
2012-09-28 15:41:49 -07:00
Mark Pizzolato
0453a87f18
Revised pdp11_dmc device to leverage the update sim_sock interfaces
2012-09-28 15:41:03 -07:00
Mark Pizzolato
30ce7fdbaa
Revised the socket library sim_sock(.c & .h) to support both IPv4 and IPv6 leveraging the RFC3493 APIs.
...
All dependent code has been updated to use the revised interfaces.
2012-09-28 15:34:55 -07:00
Mark Pizzolato
6692832785
Initial import of pdp11_dmc.c and .h from Rob Jarratt
2012-09-28 15:27:21 -07:00
Mark Pizzolato
be1e1326b3
Merge pull request #11 from andreax79/master
...
show default & set default command added
2012-08-28 07:24:00 -07:00
Andrea Bonomi
405c70bccd
set default/show default commands fix
2012-08-28 07:40:42 +02:00
Andrea Bonomi
a1a6a8a40d
show_default fix
2012-08-23 17:18:31 +02:00
Andrea Bonomi
715bc12d3b
show default & set default command added
...
Hello,
I fixed the show/set default commands and tested on the following host
platform: OSX(x64), Linux(arm), FreeBSD(x86), Windows(x64),
OpenVMS(VAX).
The commands are very simple and the code is the same for all the *nix
and VMS, and it is a little different for Windows.
Andrea
2012-08-21 12:50:27 +02:00
Mark Pizzolato
0f2ed31b33
Fix UDATA macro to reflect prior changes in the unit data structure. This fixes any reference to the macro which may supply an initial wait time to the unit structure after using the UDATA macro.
2012-07-19 13:30:31 -07:00
Mark Pizzolato
66edd72ecb
Merge branch 'nj7p/swtp6800-v2.1'
...
Conflicts:
makefile
swtp6800/common/bootrom.c
swtp6800/common/dc-4.c
swtp6800/common/i2716.c
swtp6800/common/m6800.c
swtp6800/common/m6810.c
swtp6800/common/mp-8m.c
swtp6800/common/mp-a.c
swtp6800/common/mp-a2.c
swtp6800/common/mp-b2.c
swtp6800/common/mp-s.c
swtp6800/swtp6800/mp-a2_sys.c
swtp6800/swtp6800/mp-a_sys.c
swtp6800/swtp6800/swtp_defs.h
2012-07-13 15:21:30 -07:00
Bill Beech
908ad1308e
Corrected copyright dates on all files
2012-07-11 12:23:03 -07:00
Bill Beech
fc3c1812bf
Fixed nested sim_defs.h problem
2012-07-11 12:00:57 -07:00
Bill Beech
5fcd6a7960
Updated several file to remove "egregious" errors
2012-07-11 11:59:15 -07:00
Mark Pizzolato
ffa52ab3fd
Changed the display of the contents of the error message buffer to only do so if no devices were returned at all
2012-07-10 16:14:30 -07:00
Mark Pizzolato
f66175beea
Added support to avoid the mkdir BIN race condition in parallel make
2012-07-10 13:47:17 -07:00
Mark Pizzolato
938450bbf5
Added display of warning produced by pcap_findalldevs() where a warning message is provided when no devices are available (OSX). - Sergey Oboguev
2012-07-10 13:32:41 -07:00
Mark Pizzolato
fd1cd463f9
Added UNIT_IDLE to timer threads for RQ B, C and D controllers. - Sergey Oboguev
2012-07-10 13:26:08 -07:00
Mark Pizzolato
2a9ac8a830
VHD Performance enhancementsDaa:
...
optimize BAT updates when writing to previously unwritten data blocks
data block alignment for optimal behavior on Advance Format host disks (4096 sectors)
2012-07-10 13:18:03 -07:00
Bill Beech
e0d8de9de7
Replaced SWTBUG.BIN, fixed error in common/mp-s.c, and removed debugging
...
statements from common.m6800.c. This version works in GIT release 4.0.
2012-07-08 15:50:41 -07:00
Bill Beech
567a304c37
Changes to replace the SWTP V1 code with the V2 code
2012-07-05 14:14:49 -07:00
