This approach removes the burden from any simulator code to perform instruction execution postlude before calling sim_process_event and prelude activites when sim_process_event returns.
Remote Console commands are now executed from the same simulator context as if entered from the initial sim> prompt.
John Kichury revived Startrek II running under DCC Basic which originally ran on the Digital Computer Controls (DCC) D-116 DG Nova clone
This program (or the Basic interpreter) requires console input with even parity.
SET TTI EVEN
will now enable that.
Ideas based on Dave Bryan's console halt efforts.
sim> SEND {<mux>:line} {DELAY=n,}"string"
Where <mux> is the name of the device pointed to by the TMXR structure. If <mux>:line isn't specified, then the console device is implicitly being referenced.
Delay is optional and once set persists for subsequent SEND operations to the same device. Delay defaults to 1000. The DELAY value is a minimum number of instructions which must execute before the next character in the provided string will be injected to the console port. The DELAY value has effect between the characters delivered as well. "string" requires quotes and within the quoted string, common C escape character syntax is available (\r\r\t, etc.).
Each device (console, and each line in each mux) has a separate value for DELAY.
An arbitrary number of 'expect' conditions can be defined. The command syntax is:
sim> EXPECT {<mux>:line} {[cnt]} "matchstring" {actioncommand {; actioncommand ...}}
Where <mux> is the name of the device pointed to by the TMXR structure. If <mux>:line isn't specified, then the console device is implicitly being referenced.
"matchstring" requires quotes and within the quoted string, common C escape character syntax is available (\r\r\t, etc.). The quotes used can be single or double quotes, but the closing quote must match the opening quote. The match string might be extended to allow the use of perl style regular expressions in the "matchstring" when a -R switch is specified on the command line.
sim> EXPECT "Enter Color: " SEND "Red\r"; g
A specific 'expect' condition can be removed with:
sim> NOEXPECT {<mux>:line} "matchstring"
All 'expect' conditions can be removed with:
sim> NOEXPECT {<mux>:line}
'expect' conditions can be examined with:
sim> SHOW EXPECT {<mux>:line}
Expect rules are one-shots (i.e. they disappear once a match has occurred) unless they are explicitly described as persistent with the -P switch.
The -C switch is available when defining expect rules. The effect of a rule defined with the -C flag is that when an expect match occurs for that rule, ALL rules are cleared for that device (console or <mux>:line).
We're not absolutely sure that all of the changes are correct - in particular the treatment of record marks in add/compare - but they do make the diagnostics pass, which they didn't before.
Bob asked for variable tab stops on the typewriter, and those are implemented as well. The routines were general enough that I put the SET/SHOW processors in sim_console.c, so I'm enclosing that and its header file.
Conflicts:
I1620/i1620_cpu.c
sim_console.c
sim_console.h
Added support for per line tcp listen ports.
Added support for per line outgoing tcp/telnet connections.
Removed DEV_NET from pdp11_dz and pdp11_vh emulators to allow proper restore of
scp.c, scp.h
- Change the sim_clock_queue event list to be terminated by the value QUEUE_LIST_END instead of NULL. This allows easy determination of whether a unit is on a list since when it is not on a list the next pointer is NULL.
- standardized the usage of UPDATE_SIM_TIME
- Added support for internal/pseudo devices to support the TIMER and CON-TEL pseudo devices (to enable and disable debugging)
- Reverted to the prior "SET CONSOLE DEBUG" command semantics since the console debug can be manipulated via the generic "SET <dev> DEBUG" command (i.e. SET CON-TEL DEBUG=TRC;XMT;RCV)
- Changed "SHOW TIMERS" to "SHOW CLOCKS" to display the current calibrated timer information
- Added sim_is_active_bool API to return the boolean active status avoiding the potential work walking the list when most callers aren't interested in the event firing time
- Fixed run_boot_prep to properly record the not queued status of any units which are removed from the sim_clock_queue during initialization
- Added display of DEBUG, NODEBUG options to the SHOW SHOW command
sim_timer.c, sim_timer.h
- Added asynchronous timer capabilities with support for calibration and idling
- Added internal/pseudo device to support debugging of Idle, Calibration and asynch timer activites.
- Added suppression of timer calibration when idling has occurred
sim_tmxr.c, sim_tmxr.h
- Added tmxr_activate_after and macro definition for sim_activate_after to invoke it for proper behavior with multiplexer devices
- Added all polling units to the standard timer queue when dropping back to the simulator command prompt to accommodate the potential to disable asynch mode
- Fixed synchronization to operate with pthread synchronized asynch queue and proper stopping of poll when dropping back to the simulator command prompt
- Fixed calls to select to have a timeout with properly ranged tv_usec values and dealt with possible EINTR return from select
sim_console.c, sim_console.h
- Changed internal/pseudo console telnet device name to CON=TEL
- Reverted to the prior "SET CONSOLE DEBUG" command semantics since the console debug can be manipulated via the generic "SET <dev> DEBUG" command (i.e. SET CON-TEL DEBUG=TRC;XMT;RCV)
- Fixed synchronization to operate with pthread synchronized asynch queue and proper stopping of poll when dropping back to the simulator command prompt
- Fixed calls to select to have a timeout with properly ranged tv_usec values
sim_defs.h
- Added necessary unit fields to support asynchronous timing activities
- Added asynchronous macros to support async timing activities
- Fixed asynch pthread only macros (not using AIO_INTRINSICS).
- Fixed the definition of the UDATA macro which was never adjusted to accommodate the insertion of 2 extra fields in the unit structure and thus made the initialization of the unit wait field meaningless.
- Changed the NOQUEUE_WAIT value from 10000 to 1000000. This is only used when the sim_clock_queue is empty, which normally never happens on any simulator since they all have clocks and/or other frequently polling devices. With asynchronous multiplexer and timing support the queue is often empty and this value is then used when calculating idling delays. If it is too small, idling will be inefficient. Being large should not be a problem otherwise.
Interdata/id16_cpu.c
- removed test of sim_idle_enab before calling sim_idle
Interdata/id32_cpu.c
- removed test of sim_idle_enab before calling sim_idle
vax/vax_cpu.c
- removed test of sim_idle_enab before calling sim_idle
vax/vax_stddev.c
- converted CLK device to use the internal timer service API sim_activate_after to leverage asynchronous timing when available
scp.c, scp.h, sim_defs.h
- Added commands:
SHOW MULTIPLEXER (MUX)
SHOW TIMERS
- Added facilities/APIs:
sim_activate_after - time specific event scheduling (vs instruction scheduling) API visible, optional separate thread implementation in a later revision
- Changed Commands:
SET CONSOLE DEBUG no longer affects global debugging, but merely debugging for the console subsystem. Use SET DEBUG and SET NODEBUG to affect global debugging.
- Added Asynchronous polling support
sim_tmxr.h, sim_tmxr.c
- Added Asynchronous capabilities to the multiplexer subsystem to avoid polling for input and to deliver input data instantly when it arrives instead of delaying for up to one or more full simulated clock ticks.
- Added debug trace support
- Added statistic tracking of total bytes transmitted on each line
- Added more aggressive attempts to flush transmit buffers when they fill before dropping tranmitted characters
- Fixed status return of tmxr_putc_ln to return SCPE_LOST if the transmitting line isn't connected or buffered.
sim_console.h, sim_console.c
- Fixed issue where connections to console telnet sessions would succeed for the first connection, but hang indefinitely for additional connects without rejecting due to all lines being busy. This is handled by using an internal device and unit to hang the required polling on. Connection polls happen once per second.
- Added console debugging/trace support.
- Added Asynchronous capabilities to the console subsystem to avoid polling for input and to deliver input data instantly when it arrives instead of delaying for up to one or more full simulated clock ticks.
- Added tmxr_set_console_input_unit() API to support asynchronous simulator console I/O
sim_timer.h, sim_timer.c
- Added SHOW TIMERS support
- Added mechanism to capture the timer the simulator uses for its clock tick and make this timer globally available for other uses
PDP11/pdp11_dz.c
- Added debug trace support
PDP11/pdp11_vh.c
- Added debug trace support
- Changed timing mechanisms to not assume that the count unit service routine calls measures the passage of time, and created a separate unit to measure time.
VAX/vax_stddev.c
- Added call to tmxr_set_console_input_unit to leverage Asynchronous console I/O
A key capability needed to support simulators running with background
execution is the ability to have a Telnet connected console which isn’t
continuously connected. This feature is called a Buffered Telnet console.
Absolutely nothing changes for someone not interested in using the feature.
However, if someone is interested in the feature, the following SCP
commands are available:
sim> SET CONSOLE TELNET=port ! Unchanged
sim> SET CONSOLE TELNET=BUFFERED{=buffersize} ! buffersize defaults to 32K
sim> SET CONSOLE TELNET=UNBUFFERED ! restores normal behavior
sim> SET CONSOLE TELNET=NOBUFFERED ! synonym for UNBUFFERED
sim> SET CONSOLE TELNET=LOG=logdestination ! enables logging of Telnet session traffic (potentially separate from destination specified by SET CONSOLE LOG=conlogdest)
sim> SET CONSOLE TELNET=NOLOG ! turns off specific logging of Telnet session
sim> SET CONSOLE TELNET=LOG=conlogdest ! turns on logging all console traffic (unless the telnet session logging is also specified).
The logdestinations for any of the logging/debugging commands can
now be:
LOG, DEBUG, STDOUT, STDERR or any file specification (caps are not
required, but these names are reserved to indicate the current
destination of the specified file handles (sim_log, sim_deb,
stdout, stderr).
When a Console Telnet session is Buffered, a simulator will start
(via BOOT CPU or whatever is appropriate for a particular simulator)
without needing to have an active telnet connection. When a Telnet
connection comes along for the telnet port, the contents of the saved
buffer (which wraps on overflow) are presented on the telnet session
as output before session traffic. This allows the connecting telnet
client to see what happened before he connected since the likely
reason he might be connecting to the console of a background
simulator is to troubleshoot unusual behavior.
The current structure has the optional ability to log the Telnet
session separately from the simulator output (i.e. ini file command
execution) is potentially useful when you need to review what the
simulator may have output which may be difficult to find in and
amongst the possibly verbose Operating system console output.
If someone doesn’t use “SET CONSOLE TELNET=LOG=logdestination”,
then the original strategy of logging all output to the target
specified by “SET CONSOLE LOG=logdestination” is preserved. Looking
at the isolated console output might be more interesting if/when
control flow scp commands are ever implemented (ON,GOTO, RETURN, etc.)
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The save/restore format has been updated to improve its reliability.
As a result, save files prior to release 3.0 are no longer supported.
The text documentation files are obsolete and are no longer included
with the distribution. Up-to-date PDF documentation files are
available on the SimH web site.
1. New Features
1.1 3.6-0
1.1.1 Most magnetic tapes
- Added support for limiting tape capacity to a particular size in MB
1.1.2 IBM 7090/7094
- First release
1.1.3 VAX-11/780
- Added FLOAD command, loads system file from console floppy disk
1.1.4 VAX, VAX-11/780, and PDP-11
- Added card reader support (from John Dundas)
1.1.5 PDP-11
- Added instruction history
1.2 3.6-1
1.2.1 PDP-11
- Added RF11 support
- Added multiple KL11/DL11 support
- Added upper-case only mode to TTI, TTO
1.2.2
- Added binary loader (courtesy of Dave Pitt)
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features
1.1 3.5-0
1.1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.1.4 PDP-11
- Revised autoconfigure to handle more cases
1.2 3.5-1
No new features
1.3 3.5-2
1.3.1 All ASCII terminals
- Most ASCII terminal emulators have supported 7-bit and 8-bit
operation; where required, they have also supported an upper-
case only or KSR-emulation mode. This release adds a new mode,
7P, for 7-bit printing characters. In 7P mode, non-printing
characters in the range 0-31 (decimal), and 127 (decimal), are
automatically suppressed. This prevents printing of fill
characters under Windows.
The printable character set for ASCII code values 0-31 can be
changed with the SET CONSOLE PCHAR command. Code value 127
(DELETE) is always suppressed.
1.3.2 VAX-11/780
- First release. The VAX-11/780 has successfully run VMS V7.2. The
commercial instructions and compatability mode have not been
extensively tested. The Ethernet controller is not working yet
and is disabled.
2. Bugs Fixed
2.1 3.5-0
2.1.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.1.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.1.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.1.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.1.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.1.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.1.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
2.2 3.5-1
2.2.1 1401
- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings
2.2.2 1620
- Changed character encodings to be compatible with Pierce 709X simulator
2.2.3 PDP-10
- Changed MOVNI to eliminate GCC warning
2.2.4 VAX
- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table
2.2.5 PDP-11
- Fixed bug in autoconfiguration table
2.3 3.5-2
2.3.1 PDP-10
- RP: fixed drive clear not to clear disk address
2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)
- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)
2.3.3 PDP-8
- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)
2.3.4 VAX
- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features in 3.4-1
1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.4 PDP-11
- Revised autoconfigure to handle more casees
2. Bugs Fixed in 3.4-1
2.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
RESTRICTION: The HP DS disk is not debugged. DO NOT enable this
feature for normal operations.
WARNING: Massive changes in the PDP-11 make all previous SAVEd
file obsolete. Do not attempt to use a PDP-11 SAVE file from a
prior release with V3.3!
1. New Features in 3.3
1.1 SCP
- Added -p (powerup) qualifier to RESET
- Changed SET <unit> ONLINE/OFFLINE to SET <unit> ENABLED/DISABLED
- Moved SET DEBUG under SET CONSOLE hierarchy
- Added optional parameter value to SHOW command
- Added output file option to SHOW command
1.2 PDP-11
- Separated RH Massbus adapter from RP controller
- Added TU tape support
- Added model emulation framework
- Added model details
1.3 VAX
- Separated out CVAX-specific features from core instruction simulator
- Implemented capability for CIS, octaword, compatibility mode instructions
- Added instruction display and parse for compatibility mode
- Changed SET CPU VIRTUAL=n to SHOW CPU VIRTUAL=n
- Added =n optional parameter to SHOW CPU HISTORY
1.4 Unibus/Qbus simulators (PDP-11, VAX, PDP-10)
- Simplified DMA API's
- Modified DMA peripherals to use simplified API's
1.5 HP2100 (all changes from Dave Bryan)
CPU - moved MP into its own device; added MP option jumpers
- modified DMA to allow disabling
- modified SET CPU 2100/2116 to truncate memory > 32K
- added -F switch to SET CPU to force memory truncation
- modified WRU to be REG_HRO
- added BRK and DEL to save console settings
DR - provided protected tracks and "Writing Enabled" status bit
- added "parity error" status return on writes for 12606
- added track origin test for 12606
- added SCP test for 12606
- added "Sector Flag" status bit
- added "Read Inhibit" status bit for 12606
- added TRACKPROT modifier
LPS - added SET OFFLINE/ONLINE, POWEROFF/POWERON
- added fast/realistic timing
- added debug printouts
LPT - added SET OFFLINE/ONLINE, POWEROFF/POWERON
PTR - added paper tape loop mode, DIAG/READER modifiers to PTR
- added PV_LEFT to PTR TRLLIM register
CLK - modified CLK to permit disable
1.6 IBM 1401, IBM 1620, Interdata 16b, SDS 940, PDP-10
- Added instruction history
1.7 H316, PDP-15, PDP-8
- Added =n optional value to SHOW CPU HISTORY
2. Bugs Fixed in 3.3
2.1 SCP
- Fixed comma-separated SET options (from Dave Bryan)
- Fixed duplicate HELP displays with user-specified commands
2.2 PDP-10
- Replicated RP register state per drive
- Fixed TU to set FCE on short record
- Fixed TU to return bit<15> in drive type
- Fixed TU format specification, 1:0 are don't cares
- Fixed TU handling of TMK status
- Fixed TU handling of DONE, ATA at end of operation
- Implemented TU write check
2.3 PDP-11
- Replicated RP register state per drive
- Fixed RQ, TQ to report correct controller type and stage 1 configuration
flags on a Unibus system
- Fixed HK CS2<output_ready> flag
2.4 VAX
- Fixed parsing of indirect displacement modes in instruction input
2.5 HP2100 (all fixes from Dave Bryan)
CPU - fixed S-register behavior on 2116
- fixed LIx/MIx behavior for DMA on 2116 and 2100
- fixed LIx/MIx behavior for empty I/O card slots
DP - fixed enable/disable from either device
- fixed ANY ERROR status for 12557A interface
- fixed unattached drive status for 12557A interface
- status cmd without prior STC DC now completes (12557A)
- OTA/OTB CC on 13210A interface also does CLC CC
- fixed RAR model
- fixed seek check on 13210 if sector out of range
DQ - fixed enable/disable from either device
- shortened xtime from 5 to 3 (drive avg 156KW/second)
- fixed not ready/any error status
- fixed RAR model
DR - fixed enable/disable from either device
- fixed sector return in status word
- fixed DMA last word write, incomplete sector fill value
- fixed 12610 SFC operation
- fixed current-sector determination
IPL - fixed enable/disable from either device
LPS - fixed status returns for error conditions
- fixed handling of non-printing characters
- fixed handling of characters after column 80
- improved timing model accuracy for RTE
LPT - fixed status returns for error conditions
- fixed TOF handling so form remains on line 0
SYS - fixed display of CCA/CCB/CCE instructions
2.5 PDP-15
FPP - fixed URFST to mask low 9b of fraction
- fixed exception PC setting
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT
enable this feature for normal operations.
1. New Features in 3.2-1
1.1 SCP and libraries
- Added SET CONSOLE subhierarchy.
- Added SHOW CONSOLE subhierarchy.
- Added limited keyboard mapping capability.
1.2 HP2100 (new features from Dave Bryan)
- Added instruction printout to HALT message.
- Added M and T internal registers.
- Added N, S, and U breakpoints.
1.3 PDP-11 and VAX
- Added DHQ11 support (from John Dundas)
2. Bugs Fixed in 3.2-1
2.1 HP2100 (most fixes from Dave Bryan)
- SBT increments B after store.
- DMS console map must check dms_enb.
- SFS x,C and SFC x,C work.
- MP violation clears automatically on interrupt.
- SFS/SFC 5 is not gated by protection enabled.
- DMS enable does not disable mem prot checks.
- DMS status inconsistent at simulator halt.
- Examine/deposit are checking wrong addresses.
- Physical addresses are 20b not 15b.
- Revised DMS to use memory rather than internal format.
- Revised IBL facility to conform to microcode.
- Added DMA EDT I/O pseudo-opcode.
- Separated DMA SRQ (service request) from FLG.
- Revised peripherals to make SFS x,C and SFC x,C work.
- Revised boot ROMs to use IBL facility.
- Revised IBL treatment of SR to preserve SR<5:3>.
- Fixed LPS, LPT timing.
- Fixed DP boot interpretation of SR<0>.
- Revised DR boot code to use IBL algorithm.
- Fixed TTY input behavior during typeout for RTE-IV.
- Suppressed nulls on TTY output for RTE-IV.
- Added SFS x,C and SFC x,C to print/parse routines.
- Fixed spurious timing error in magtape reads.
2.2 All DEC console devices
- Removed SET TTI CTRL-C option.
2.3 PDP-11/VAX peripherals
- Fixed bug in TQ reporting write protect status (reported by Lyle Bickley).
- Fixed TK70 model number and media ID (found by Robert Schaffrath).
- Fixed bug in autoconfigure (found by John Dundas).
2.4 VAX
- Fixed bug in DIVBx and DIVWx (reported by Peter Trimmel).
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT
enable this feature for normal operations.
WARNING: The core simulator files (scp.c, sim_*.c) have been
reorganized. Unzip V3.2-0 to an empty directory before attempting
to compile the source.
IMPORTANT: If you are compiling for UNIX, please read the notes
for Ethernet very carefully. You may need to download a new
version of the pcap library, or make changes to the makefile,
to get Ethernet support to work.
1. New Features in 3.2-0
1.1 SCP and libraries
- Added SHOW <device> RADIX command.
- Added SHOW <device> MODIFIERS command.
- Added SHOW <device> NAMES command.
- Added SET/SHOW <device> DEBUG command.
- Added sim_vm_parse_addr and sim_vm_fprint_addr optional interfaces.
- Added REG_VMAD flag.
- Split SCP into separate libraries for easier modification.
- Added more room to the device and unit flag fields.
- Changed terminal multiplexor library to support unlimited.
number of async lines.
1.2 All DECtapes
- Added STOP_EOR flag to enable end-of-reel error stop
- Added device debug support.
1.3 Nova and Eclipse
- Added QTY and ALM multiplexors (Bruce Ray).
1.4 LGP-30
- Added LGP-30/LGP-21 simulator.
1.5 PDP-11
- Added format, address increment inhibit, transfer overrun
detection to RK.
- Added device debug support to HK, RP, TM, TQ, TS.
- Added DEUNA/DELUA (XU) support (Dave Hittner).
- Add DZ per-line logging.
1.6 18b PDP's
- Added support for 1-4 (PDP-9)/1-16 (PDP-15) additional
terminals.
1.7 PDP-10
- Added DEUNA/DELUA (XU) support (Dave Hittner).
1.8 VAX
- Added extended memory to 512MB (Mark Pizzolato).
- Added RXV21 support.
2. Bugs Fixed in 3.2-0
2.1 SCP
- Fixed double logging of SHOW BREAK (found by Mark Pizzolato).
- Fixed implementation of REG_VMIO.
2.2 Nova and Eclipse
- Fixed device enable/disable support (found by Bruce Ray).
2.3 PDP-1
- Fixed bug in LOAD (found by Mark Crispin).
2.4 PDP-10
- Fixed bug in floating point unpack.
- Fixed bug in FIXR (found by Phil Stone, fixed by Chris Smith).
2.6 PDP-11
- Fixed bug in RQ interrupt control (found by Tom Evans).
2.6 PDP-18B
- Fixed bug in PDP-15 XVM g_mode implementation.
- Fixed bug in PDP-15 indexed address calculation.
- Fixed bug in PDP-15 autoindexed address calculation.
- Fixed bugs in FPP-15 instruction decode.
- Fixed clock response to CAF.
- Fixed bug in hardware read-in mode bootstrap.
- Fixed PDP-15 XVM instruction decoding errors.
2.7 VAX
- Fixed PC read fault in EXTxV.
- Fixed PC write fault in INSV.
