Fix divide of 0 on KS10 processor.
Fix write access for auxiliary processor memory.
Updated support new PIDP10 panel.
Allow eight Unibux ports on the TEN device.
Added GE DATANET-760 device to PDP6
Removed USER mode restriction for idle detection.
Added Data Disc 6600 Television Display System.
Josh's Altair/IMSAI Replacement (JAIR) is a single board computer
(SBC) for the S100 bus. I created this device to assist a friend
with getting IMP and CBBS working on his JAIR. Without having a
JAIR myself, AltairZ80 to the rescue!
The following devices are added:
JAIR - The main JAIR board I/O and ROM
JAIRS0 - Serial Port 0 (COM1)
JAIRS1 - Serial Port 1 (COM2)
JAIRP - Parallel Port
This was a bit challenging because the JAIR uses an on-board SD
card with FAT file system to hold its BIOS and CP/M disk images.
The ATTACH command is used to mount SD card images to the
simulator. The simulator emulates the SD card interface for
read/writing SD card sectors. These images are easily mounted on
a Mac making moving files around easy. I do not know about Windows.
These same images can be written to an SD card and used with real
JAIR hardware, which may be useful for JAIR owners.
The serial and parallel ports fully support TMXR. Host serial ports
and sockets may be attached to these devices.
I am working on a GitHub repository containing an SD card image and
init script that will boot CP/M 2.2 on the JAIR simulator.
Is this device one that should be added to AltairZ80?
This PR adds support for the Processor Technology VDM-1 display adapter and Sol-20 computer system. The VDM-1 was integrated into the Sol-20 but has been separated out into its own device.
This PR adds the following devices to the AltairZ80 simulator:
VDM1 - Processor Technology VDM-1 display adapter
SOL20 - Processor Technology SOL20 with SOLOS ROMs
SOL20K - SOL20 Keyboard (callback from VDM1)
SOL20T - SOL20 Tape (reads/writes cassette file images)
SOL20S - SOL20 Serial Port (TMXR capable)
SOL20P - SOL20 Printer Port (TMXR capable)
- Builds x86 and x64 regular snapshots.
x64: Mon Wed Fri
x86: Tue Thu Sat
ARM: Mon Thu Sun (ARM not enabled)
- Builds x64 on closed pull request, Release
- Manual trigger allows selection of ref, platform,
architecture, config, disposition
- Releases and daily snapshots are deployed automagically
- VS Project 2022 files updated for ARM, but not setup for
cross-builds (BuildROMs) or tested on ARM (no hardware)
- Fix makefile tests for cygwin
* AltairZ80: SS1: Fix disable after reset.
The CompuPro System Support 1 could not be disabled after enabled and
used due to timers causing it to be busy. Reset properly so that "set
ss1 disabled" works after reset.
* AltairZ80: wd179x: Properly reset 179x state.
* AltairZ80: M68K: Fix compile with VS2008.
* Musashi: Fix compilation with Visual Studio 2008.
* AltairZ80: M68K: Resolve warnings in softfloat.
* AltairZ80: Add headers to .vcproj
This commit introduces dozens of changes to make the 3B2-700 simulator
fully functional and ready for wider use. In addition to 3B2-700
availability, this commit includes a tremendous amount of refactoring
of the 3B2-400 and common code to make the project structure easier to
maintain and reason about.
One final important change: ROM files are no longer included in the
source code. 3B2 ROM images must be obtained separately and loaded
into the simulator before boot.
Changes:
- The 3b2 target has been aliased to 3b2-400
- The formerly named 3b2-600 project has become 3b2-700
- SCSI QIC tape support has been added to sim_scsi.c
- Header files have been reworked to reduce complexity of includes
- Common code has been consolidated
- Timer code has been unified
- General cleanup of codebase
- Fixed condition codes m6800.c from Roberto Sancho Villa
- Add additional FDC lfd-400 from Roberto Sancho Villa
- Add additional OS's (FLEX 1.0, FDOS 1.0, DOS68, MiniDOS, and MiniDOS-MPX)
to software support
- Add additional disk formats to software support dc-4.c from Roberto
Sancho Villa
- Add CPU history
- Fix LOAD/DUMP to support binary and hex
- Fix fprintf_sym to disassemble 6800 code correctly
- Add EXAMINE/DEPOSIT to CPU Memory
- Fixed disasm to space the register
- Add SET_FLAG(IF) to IRQ – fixed error in handling IRQ from
Roberto Sancho Villa
These devices start disabled and will be that way in essentially all
working systems, but there apparently was a DECnet Phase V
support for this device, so it is added to all systems. The DPV
should now be readily testable.
As mentioned in #1152. That PR will fix the DUP device.
This commit is explicitly released from any license restriction
mentioned in the LICENSE.txt of the github.com/simh/simh
master branch changes.
At this time:
- The ZAP command exists to remove meta data from containers that
have it. Container files processed by the ZAP command will generally
be restored to the size it was before the addition of the meta data
and the file time stamps will be unchanged.
- Newly created containers get meta data.
- At attach time, containers that don't have meta data, but have
recognized file systems that fit within the drive it is being
attached to get meta data added without changing the file timestamps.
- Containers that don't have meta data and don't have a recognized
file system that is <= the drive size are attached without comment
and without adding meta data as long as the drive is NOT set to
autosize (controllers that support multiple drive types all default to
autosize, which can explicitly be disabled on a drive by drive basis).
- Containers that don't have meta data which are > the drive size can
only be attached read only.
- Containers with meta data can not be attached to a different
controller at all if the container size is smaller than the drive on the
other controller.
- Containers that have meta data can be freely be attached to the
controller that they were attached to when they got the meta data.
If a file system is detected, it will be reported. Otherwise if no
recognized file system is found, the attach will be silent. File
system detection reporting can be suppressed with -Q on the attach
command.
- Containers with meta data can only be attached read only to a different
controller if the container is larger than the drive it is being
attached to.
In the future:
- In general, containers with meta data (or recognized file systems)
will be attachable to MSCP and SCSI controllers, as long as reasonable
sector sizes and file system not requiring interleaving have been found.
- Containers without meta data will only be attachable if autosize
is disabled and the container is <= the size of the drive.
- Explicitly setting a drive type on a unit will implicitly disable
autosizing. If a user wants to set the default drive for a unit
and still allow autosizing they must explicitly set the unit to
autosize after setting the drive type.
Relevant to: #1065, #1059, #1094, #1100, #1118, #1117
- This change introduces a full refactor of the interrupt subsystem
for the system board (SBD) and the I/O bus (CIO). Interrupt decode
should now be significantly faster, and not require an expensive
calculation on every step.
- The TIMER device has been split into Rev 2 and Rev 3
implementations.
- The optional 3B2/400 Debug Monitor ROMs can now be booted by passing
the "DEMON" argument to the 3B2/400 simulator BOOT command. Any
of the following will cause the Debug Monitor ROM to be booted
instead of the standard 3B2/400 ROM:
sim> BOOT DEMON
sim> BOOT CPU DEMON
sim> BOOT DEMON CPU
This change introduces initial support for the AT&T 3B2 Rev 3 platform, based
around the WE32200 CPU with up to 64MB of RAM and SCSI disk and tape support.
This simulator is experimental and not yet supported. It will not be built by
default, but can be built with:
make 3b2-600
Or by using the 3B2-600 Windows Visual Studio project.
This change lays the groundwork for adding support for Rev 3 3B2 models,
which includes the Model 500, Model 600, and Model 1000.
Rather than use the fixed strings "400" and "1000" in file names, the
strings "rev2" and "rev3" will be used, which allows greater flexibility
to implement various system configurations more easily.
Additionally, this change adds a copy of the Debug Monitor (DEMON) ROM
image for the Rev 2 board, to be used soon in a later checkin.
