The goals here being to simplify calling code while getting consistent output delivered everywhere it may be useful.
Modified most places which explicitly used sim_log or merely called printf to now avoid doing that and merely call sim_printf().
Show IOSPACE doesn't always get the number of devices right due to device creativity.
o The distinction between UNIT and DEVICE has blurred
o MUX devices merge several physical devices into one device/unit
o Dynamic device sizing has made things more volatile.
This edit solves the problem for SHOW IOSPACE by adding an (optional) word to the DIBs.
The word contains the amount of IO space consumed by each instance of the physical device that's being emulated.
E.G., if it's a DZ11, the device is the DZ11 module, or 8 lines, even though the MUX device may support 32.
This enables SHOW IOSPACE to determine the number of physical devices being emulated, which is what folks need when configuring software. The word may have other uses - in a generic dynamic device sizing routine - which is why the amount of IOSPACE per device was chosen rather than the 'number of physical devices.'
The edit should not make any existing device regress. If the new word (ulnt) is zero (not initialized), SHOW IOSPACE will default to the number of units in the device, or if there's no device (CPUs), 1 as before. If it is present, the number of devices is the calculated as total allocation/allocation-per-device.
The edit updates all the devices that seem to require this treatment, and all the processors that define the UNIBUS/QBUS DIBs.
Fixed auto configure bugs which didn't allow Fixed CSR Addresses or Fixed Vectors to be set using the auto configure information.
Fixed display of address and vectors to indicate that the assigned address and/or vector is in the floating set.
Added extended definitions to the auto configure table to reflect all known potential static and floating and static addresses as of VMS V5.5-2
Changed the name of the VAX 11/780 console floppy device name to RXC from RX (which collides with a Unibus name for the RX11).
scp.c, scp.h
- added sim_uname (Unit Name) API to simplify places which might want to display it (mostly debug messages).
- added support for clock co-scheduling
- added debugging to trace event queue activities
sim_defs.h
- added support for clock co-scheduling
- added support for sim_uname (Thread local storage macro)
- added support for debugging to trace event queue activities
- simplified debug code by using sim_uname
- fixed support macro for sim_is_active when asynch timers are in use
sim_rev.h
- fixed nested comments
sim_tmxr.c, sim_tmxr.h
- added support for clock co-scheduling
- simplified debug code by using sim_uname
- added support for devices which poll for output on different units
sim_timer.c, sim_timer.h
- added support for clock co-scheduling
- fixed asynchronous clock calibration to smooth out calibration adjustments
- simplified debug code by using sim_uname
- added ability (when running with asynchronous support) to explicitly disable or enable asynchronous timer support.
- changed sim_timer_inst_per_sec to return a double value since the result is always used in a double expression and integer overflow could occur under strange timing conditions
vax/vax_stddev.c
- converted from simulator specific clock co-scheduling to generic clock co-scheduling.
vax/vax_cpu.c
- added EVENT and ACTIVATE debug flag (SET CPU DEBUG=EVENT;ACTIVATE) support
pdp11/pdp11_dz.c
- converted from simulator specific clock co-scheduling to generic clock co-scheduling.
pdp11/pdp11_vh.c
- converted from simulator specific clock co-scheduling to generic clock co-scheduling.
pdp11/pdp11_xq.c
- converted from simulator specific clock co-scheduling to generic clock co-scheduling.
Added support for per line tcp listen ports.
Added support for per line outgoing tcp/telnet connections.
Removed DEV_NET from pdp11_dz and pdp11_vh emulators to allow proper restore of
scp.c, scp.h, sim_defs.h
- Added commands:
SHOW MULTIPLEXER (MUX)
SHOW TIMERS
- Added facilities/APIs:
sim_activate_after - time specific event scheduling (vs instruction scheduling) API visible, optional separate thread implementation in a later revision
- Changed Commands:
SET CONSOLE DEBUG no longer affects global debugging, but merely debugging for the console subsystem. Use SET DEBUG and SET NODEBUG to affect global debugging.
- Added Asynchronous polling support
sim_tmxr.h, sim_tmxr.c
- Added Asynchronous capabilities to the multiplexer subsystem to avoid polling for input and to deliver input data instantly when it arrives instead of delaying for up to one or more full simulated clock ticks.
- Added debug trace support
- Added statistic tracking of total bytes transmitted on each line
- Added more aggressive attempts to flush transmit buffers when they fill before dropping tranmitted characters
- Fixed status return of tmxr_putc_ln to return SCPE_LOST if the transmitting line isn't connected or buffered.
sim_console.h, sim_console.c
- Fixed issue where connections to console telnet sessions would succeed for the first connection, but hang indefinitely for additional connects without rejecting due to all lines being busy. This is handled by using an internal device and unit to hang the required polling on. Connection polls happen once per second.
- Added console debugging/trace support.
- Added Asynchronous capabilities to the console subsystem to avoid polling for input and to deliver input data instantly when it arrives instead of delaying for up to one or more full simulated clock ticks.
- Added tmxr_set_console_input_unit() API to support asynchronous simulator console I/O
sim_timer.h, sim_timer.c
- Added SHOW TIMERS support
- Added mechanism to capture the timer the simulator uses for its clock tick and make this timer globally available for other uses
PDP11/pdp11_dz.c
- Added debug trace support
PDP11/pdp11_vh.c
- Added debug trace support
- Changed timing mechanisms to not assume that the count unit service routine calls measures the passage of time, and created a separate unit to measure time.
VAX/vax_stddev.c
- Added call to tmxr_set_console_input_unit to leverage Asynchronous console I/O
It also modifies the HP 2100 and PDP11 multiplexers to add serial support as demonstrations of the capability that, one day, might be extended to all simulators. I have tested the HP support, but I relied on Holger Veit to test the DEC stuff, so I can't guarantee that it works. I also relied on Holger to test under Linux, so the same caveat applies.
The changes needed in the device simulators are relatively small. For example, if you look at the patches for "hp2100_baci.c", you'll note that most of them are documentation changes. The only things of note are:
- an expansion of the TMXR initializer
- additional code in the "attach" routine to try attaching a serial port
if attaching a socket fails
- additional code in the "detach" routine for the same reasons
The HP MPX device (hp2100_mpx.c) needs a tiny bit of additional support from the ATTACH and DETACH commands. Specifically, SCP was modified to set a flag ("sim_unit_ref") to indicate whether ATTACH MPX or ATTACH MPX0 was done, i.e., to differentiate between a device and a unit attach (recall that SCP treats these as both referring to unit 0). This is needed because the socket attaches (logically) to the device, whereas a serial port attaches to a line. Without this flag, the attach routine cannot differentiate between ATTACH MPX and ATTACH MPX0, as the distinction is lost by the time the VM's attach routine is called. This support isn't needed for the HP MUX device because the socket attaches to a different device than the lines do.
MPX also requires a bit more work due to the capability to mix serial and Telnet lines on the same multiplexer (BACI is a single-line terminal device).
The attached PDF contains revisions to the "Writing a Simulator for the SIMH System" publication that documents the additions and changes to the multiplexer library for serial port support. User documentation for serial port support currently exists only in the initial comments in "sim_tmxr.c"; I will add the appropriate text to the "SIMH User's Guide" if we decide to add this to the release version.
and data traffic (SET VH DEBUG[=REG;INT;XMT;RCV])
- Added SET LOG and SET NOLOG support for logging mux
traffic
- Fixed SET VH LINES=n to correctly adjust the number
of lines available to be 8, 16, 24, or 32.
- Fixed performance issue avoiding redundant polling in unit
service routine (removed 75% of polling overhead)
pdp11_dz.c: - Added debugging support to trace register, interrupt
and data traffic (SET VH DEBUG[=REG;INT;XMT;RCV])
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features
1.1 3.5-0
1.1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.1.4 PDP-11
- Revised autoconfigure to handle more cases
1.2 3.5-1
No new features
1.3 3.5-2
1.3.1 All ASCII terminals
- Most ASCII terminal emulators have supported 7-bit and 8-bit
operation; where required, they have also supported an upper-
case only or KSR-emulation mode. This release adds a new mode,
7P, for 7-bit printing characters. In 7P mode, non-printing
characters in the range 0-31 (decimal), and 127 (decimal), are
automatically suppressed. This prevents printing of fill
characters under Windows.
The printable character set for ASCII code values 0-31 can be
changed with the SET CONSOLE PCHAR command. Code value 127
(DELETE) is always suppressed.
1.3.2 VAX-11/780
- First release. The VAX-11/780 has successfully run VMS V7.2. The
commercial instructions and compatability mode have not been
extensively tested. The Ethernet controller is not working yet
and is disabled.
2. Bugs Fixed
2.1 3.5-0
2.1.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.1.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.1.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.1.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.1.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.1.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.1.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
2.2 3.5-1
2.2.1 1401
- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings
2.2.2 1620
- Changed character encodings to be compatible with Pierce 709X simulator
2.2.3 PDP-10
- Changed MOVNI to eliminate GCC warning
2.2.4 VAX
- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table
2.2.5 PDP-11
- Fixed bug in autoconfiguration table
2.3 3.5-2
2.3.1 PDP-10
- RP: fixed drive clear not to clear disk address
2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)
- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)
2.3.3 PDP-8
- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)
2.3.4 VAX
- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features in 3.4-1
1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.4 PDP-11
- Revised autoconfigure to handle more casees
2. Bugs Fixed in 3.4-1
2.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT
enable this feature for normal operations.
WARNING: The core simulator files (scp.c, sim_*.c) have been
reorganized. Unzip V3.2-0 to an empty directory before attempting
to compile the source.
IMPORTANT: If you are compiling for UNIX, please read the notes
for Ethernet very carefully. You may need to download a new
version of the pcap library, or make changes to the makefile,
to get Ethernet support to work.
1. New Features in 3.2-0
1.1 SCP and libraries
- Added SHOW <device> RADIX command.
- Added SHOW <device> MODIFIERS command.
- Added SHOW <device> NAMES command.
- Added SET/SHOW <device> DEBUG command.
- Added sim_vm_parse_addr and sim_vm_fprint_addr optional interfaces.
- Added REG_VMAD flag.
- Split SCP into separate libraries for easier modification.
- Added more room to the device and unit flag fields.
- Changed terminal multiplexor library to support unlimited.
number of async lines.
1.2 All DECtapes
- Added STOP_EOR flag to enable end-of-reel error stop
- Added device debug support.
1.3 Nova and Eclipse
- Added QTY and ALM multiplexors (Bruce Ray).
1.4 LGP-30
- Added LGP-30/LGP-21 simulator.
1.5 PDP-11
- Added format, address increment inhibit, transfer overrun
detection to RK.
- Added device debug support to HK, RP, TM, TQ, TS.
- Added DEUNA/DELUA (XU) support (Dave Hittner).
- Add DZ per-line logging.
1.6 18b PDP's
- Added support for 1-4 (PDP-9)/1-16 (PDP-15) additional
terminals.
1.7 PDP-10
- Added DEUNA/DELUA (XU) support (Dave Hittner).
1.8 VAX
- Added extended memory to 512MB (Mark Pizzolato).
- Added RXV21 support.
2. Bugs Fixed in 3.2-0
2.1 SCP
- Fixed double logging of SHOW BREAK (found by Mark Pizzolato).
- Fixed implementation of REG_VMIO.
2.2 Nova and Eclipse
- Fixed device enable/disable support (found by Bruce Ray).
2.3 PDP-1
- Fixed bug in LOAD (found by Mark Crispin).
2.4 PDP-10
- Fixed bug in floating point unpack.
- Fixed bug in FIXR (found by Phil Stone, fixed by Chris Smith).
2.6 PDP-11
- Fixed bug in RQ interrupt control (found by Tom Evans).
2.6 PDP-18B
- Fixed bug in PDP-15 XVM g_mode implementation.
- Fixed bug in PDP-15 indexed address calculation.
- Fixed bug in PDP-15 autoindexed address calculation.
- Fixed bugs in FPP-15 instruction decode.
- Fixed clock response to CAF.
- Fixed bug in hardware read-in mode bootstrap.
- Fixed PDP-15 XVM instruction decoding errors.
2.7 VAX
- Fixed PC read fault in EXTxV.
- Fixed PC write fault in INSV.
Because some key files have changed, V3.0 should be unzipped to a
clean directory.
1. New Features in 3.0-0
1.1 SCP and Libraries
- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support
1.2 All magtapes
- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
the -F switch.
1.3 VAX
- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).
2. Bugs Fixed in 3.01-0
2.1 VAX
- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
o First and second operands reversed
o Separated fraction received wrong exponent
o Overflow calculation on separated integer incorrect
o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
fast host processors (fixes from Mark Pizzolato).
2.2 1401
- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
2.3 Nova
- Fixed DSK variable size interaction with restore.
2.4 PDP-1
- Fixed DT variable size interaction with restore.
2.5 PDP-11
- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
o Corrected XQ interrupts on IE state transition (code by Tom Evans).
o Added XQ interrupt clear on soft reset.
o Removed XQ interrupt when setting XL or RL (multiple people).
o Added SET/SHOW XQ STATS.
o Added SHOW XQ FILTERS.
o Added ability to split received packet into multiple buffers.
o Added explicit runt and giant packet processing.
2.6 PDP-18B
- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
2.7 PDP-8
- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
2.8 HP2100
- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
2.9 GRI
- Fixed bug in SC queue pointer management.
3. New Features in 3.0 vs prior releases
N/A
4. Bugs Fixed in 3.0 vs prior releases
N/A
5. General Notes
WARNING: The RESTORE command has changed. RESTORE will now
detach an attached file on a unit, if that unit did not have
an attached file in the saved configuration. This is required
to assure that the unit flags and the file state are consistent.
WARNING: The compilation scheme for the PDP-10, PDP-11, and VAX
has changed. Use one of the supplied build files, or read the
documentation carefully, before compiling any of these simulators.
WARNING: V2.10 has reorganized and renamed some of the definition
files for the PDP-10, PDP-11, and VAX. Be sure to delete all
previous source files before you unpack the Zip archive, or
unpack it into a new directory structure.
WARNING: V2.10 has a new, more comprehensive save file format.
Restoring save files from previous releases will cause 'invalid
register' errors and loss of CPU option flags, device enable/
disable flags, unit online/offline flags, and unit writelock
flags.
WARNING: If you are using Visual Studio .NET through the IDE,
be sure to turn off the /Wp64 flag in the project settings, or
dozens of spurious errors will be generated.
WARNING: Compiling Ethernet support under Windows requires
extra steps; see the Ethernet readme file. Ethernet support is
currently available only for Windows, Linux, NetBSD, and OpenBSD.
1. New Features
1.1 SCP and Libraries
- The VT emulation package has been replaced by the capability
to remote the console to a Telnet session. Telnet clients
typically have more complete and robust VT100 emulation.
- Simulated devices may now have statically allocated buffers,
in addition to dynamically allocated buffers or disk-based
data stores.
- The DO command now takes substitutable arguments (max 9).
In command files, %n represents substitutable argument n.
- The initial command line is now interpreted as the command
name and substitutable arguments for a DO command. This is
backward compatible to prior versions.
- The initial command line parses switches. -Q is interpreted
as quiet mode; informational messages are suppressed.
- The HELP command now takes an optional argument. HELP <cmd>
types help on the specified command.
- Hooks have been added for implementing GUI-based consoles,
as well as simulator-specific command extensions. A few
internal data structures and definitions have changed.
- Two new routines (tmxr_open_master, tmxr_close_master) have
been added to sim_tmxr.c. The calling sequence for
sim_accept_conn has been changed in sim_sock.c.
- The calling sequence for the VM boot routine has been modified
to add an additional parameter.
- SAVE now saves, and GET now restores, controller and unit flags.
- Library sim_ether.c has been added for Ethernet support.
1.2 VAX
- Non-volatile RAM (NVR) can behave either like a memory or like
a disk-based peripheral. If unattached, it behaves like memory
and is saved and restored by SAVE and RESTORE, respectively.
If attached, its contents are loaded from disk by ATTACH and
written back to disk at DETACH and EXIT.
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape) has been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from vax_stddev.c and
now references a common implementation file, dec_pt.h.
- Examine and deposit switches now work on all devices, not just
the CPU.
- Device address conflicts are not detected until simulation starts.
1.3 PDP-11
- SHOW <device> VECTOR displays the device's interrupt vector.
Most devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape), RK611/RK06/RK07 (cartridge disk),
RX211 (double density floppy), and KW11P programmable clock
have been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from pdp11_stddev.c and
now references a common implementation file, dec_pt.h.
- Device bootstraps now use the actual CSR specified by the
SET ADDRESS command, rather than just the default CSR. Note
that PDP-11 operating systems may NOT support booting with
non-standard addresses.
- Specifying more than 256KB of memory, or changing the bus
configuration, causes all peripherals that are not compatible
with the current bus configuration to be disabled.
- Device address conflicts are not detected until simulation starts.
1.4 PDP-10
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The RX211 (double density floppy) has been added; it is off
by default.
- The paper tape now references a common implementation file,
dec_pt.h.
- Device address conflicts are not detected until simulation starts.
1.5 PDP-1
- DECtape (then known as MicroTape) support has been added.
- The line printer and DECtape can be disabled and enabled.
1.6 PDP-8
- The RX28 (double density floppy) has been added as an option to
the existing RX8E controller.
- SHOW <device> DEVNO displays the device's device number. Most
devices allow the device number to be changed with SET <device>
DEVNO=nnn.
- Device number conflicts are not detected until simulation starts.
1.7 IBM 1620
- The IBM 1620 simulator has been released.
1.8 AltairZ80
- A hard drive has been added for increased storage.
- Several bugs have been fixed.
1.9 HP 2100
- The 12845A has been added and made the default line printer (LPT).
The 12653A has been renamed LPS and is off by default. It also
supports the diagnostic functions needed to run the DCPC and DMS
diagnostics.
- The 12557A/13210A disk defaults to the 13210A (7900/7901).
- The 12559A magtape is off by default.
- New CPU options (EAU/NOEAU) enable/disable the extended arithmetic
instructions for the 2116. These instructions are standard on
the 2100 and 21MX.
- New CPU options (MPR/NOMPR) enable/disable memory protect for the
2100 and 21MX.
- New CPU options (DMS/NODMS) enable/disable the dynamic mapping
instructions for the 21MX.
- The 12539 timebase generator autocalibrates.
1.10 Simulated Magtapes
- Simulated magtapes recognize end of file and the marker
0xFFFFFFFF as end of medium. Only the TMSCP tape simulator
can generate an end of medium marker.
- The error handling in simulated magtapes was overhauled to be
consistent through all simulators.
1.11 Simulated DECtapes
- Added support for RT11 image file format (256 x 16b) to DECtapes.
2. Release Notes
2.1 Bugs Fixed
- TS11/TSV05 was not simulating the XS0_MOT bit, causing failures
under VMS. In addition, two of the CTL options were coded
interchanged.
- IBM 1401 tape was not setting a word mark under group mark for
load mode reads. This caused the diagnostics to crash.
- SCP bugs in ssh_break and set_logon were fixed (found by Dave
Hittner).
- Numerous bugs in the HP 2100 extended arithmetic, floating point,
21MX, DMS, and IOP instructions were fixed. Bugs were also fixed
in the memory protect and DMS functions. The moving head disks
(DP, DQ) were revised to simulate the hardware more accurately.
Missing functions in DQ (address skip, read address) were added.
2.2 HP 2100 Debugging
- The HP 2100 CPU nows runs all of the CPU diagnostics.
- The peripherals run most of the peripheral diagnostics. There
is still a problem in overlapped seek operation on the disks.
See the file hp2100_diag.txt for details.
3. In Progress
These simulators are not finished and are available in a separate
Zip archive distribution.
- Interdata 16b/32b: coded, partially tested. See the file
id_diag.txt for details.
- SDS 940: coded, partially tested.
1. New Features
1.1 GRI-909
- This is a new simulator for the GRI-909.
- It has been hand-tested; so far, no software has been discovered.
1.2 VAX
- SET CPU CONHALT will cause a HALT instruction to return to the
boot ROM console rather than to SIMH. SET CPU SIMHALT restores
the default behavior.
- BRB/W self at IPL 1F stops the simulator. This is the default
behavior of VMS at exit.
1.3 PDP-18b
- ATTACH -A PTR/PTP attaches the reader and punch in ASCII mode.
In ASCII mode, the reader automatically sets the high order bit
of incoming alphabetic data, and the punch clears the high order
bit of outgoing data.
1.4 SCP
- DO -V echoes commands from the file as they are executed.
- Under Windows, execution priority is set BELOW_NORMAL when the
simulator is running.
2. Release Notes
2.1 Bugs Fixed
- PDP-11 CPU: fixed updating of MMR0 on a memory management error.
- VAX FPA: changed function names to avoid conflict with C math library.
- 1401 MT: read end of record generates group mark without word mark.
- 1401 DP: fixed address generation and checking.
- SCP: an EXIT within a DO command will cause the simulator to exit.
3. In Progress
- Interdata 16b/32b: coded, not tested.
- SDS 940: coded, not tested.
- IBM 1620: coded, not tested.
If you would like to help with the debugging of the untested simulators,
they can be made available by special request.
1. New Features
1.1 Directory and documentation
- Only common files (SCP and libraries) are in the top level
directory. Individual simulator files are in their individual
directories.
- simh_doc.txt has been split up. simh_doc.txt now documents
only SCP. The individual simulators are documented in separate
text files in their own directories.
- mingw_build.bat is a batch file for the MINGW/gcc environment
that will build all the simulators, assuming the root directory
structure is at c:\sim.
- Makefile is a UNIX make file for the gcc environment that will
build all the simulators, assuming the root directory is at
c:\sim.
1.2 SCP
- DO <file name> executes the SCP commands in the specified file.
- Replicated registers in unit structures can now be declared as
arrays for examine, modify, save, and restore. Most replicated
unit registers (for example, mag tape position registers) have
been changed to arrays.
- The ADD/REMOVE commands have been replaced by SET unit ONLINE
and SET unit OFFLINE, respectively.
- Register names that are unique within an entire simulator do
not have to be prefaced with the device name.
- The ATTACH command can attach files read only, either under
user option (-r), or because the attached file is ready only.
- The SET/SHOW capabilities have been extended. New forms include:
SET <dev> param{=value}{ param ...}
SET <unit> param{=value}{ param ...}
SHOW <dev> {param param ...}
SHOW <unit> {param param ...}
- Multiple breakpoints have been implemented. Breakpoints are
set/cleared/displayed by:
BREAK addr_list{[count]}
NOBREAK addr_list
SHOW BREAK addr_list
1.3 PDP-11 simulator
- Unibus map implemented, with 22b RP controller (URH70) or 18b
RP controller (URH11) (in debug).
- All DMA peripherals rewritten to use map.
- Many peripherals modified for source sharing with VAX.
- RQDX3 implemented.
- Bugs fixed in RK11 and RL11 write check.
1.4 PDP-10 simulator
- ITS 1-proceed implemented.
- Bugs fixed in ITS PC sampling and LPMR
1.5 18b PDP simulator
- Interrupts split out to multiple levels to allow easier
expansion.
1.5 IBM System 3 Simulator
- Written by Charles (Dutch) Owen.
1.6 VAX Simulator (in debug)
- Simulates MicroVAX 3800 (KA655) with 16MB-64MB memory, RQDX3,
RLV12, TSV11, DZV11, LPV11, PCV11.
- CDROM capability has been added to the RQDX3, to allow testing
with VMS hobbyist images.
1.7 SDS 940 Simulator (not tested)
- Simulates SDS 940, 16K-64K memory, fixed and moving head
disk, magtape, line printer, console.
1.8 Altair Z80
- Revised from Charles (Dutch) Owen's original by Peter Schorn.
- MITS 8080 with full Z80 simulation.
- 4K and 8K BASIC packages, Prolog package.
1.9 Interdata
The I4 simulator has been withdrawn for major rework. Look for
a complete 16b/32b Interdata simulator sometime next year.
2. Release Notes
2.1 SCP
SCP now allows replicated registers in unit structures to be
modelled as arrays. All replicated register declarations have
been replaced by register array declarations. As a result,
save files from prior revisions will generate errors after
restoring main memory.
2.2 PDP-11
The Unibus map code is in debug. The map was implemented primarily
to allow source sharing with the VAX, which requires a DMA map.
DMA devices work correctly with the Unibus map disabled.
The RQDX3 simulator has run a complete RSTS/E SYSGEN, with multiple
drives, and booted the completed system from scratch.
2.3 VAX
The VAX simulator will run the boot code up to the >>> prompt. It
can successfully process a SHOW DEVICE command. It runs the HCORE
instruction diagnostic. It can boot the hobbyist CD through SYSBOOT
and through the date/time dialog and restore the hobbyist CD, using
standalone backup. On the boot of the restored disk, it gets to the
date/time dialog, and then crashes.
2.4 SDS 940
The SDS 940 is untested, awaiting real code.
2.5 GCC Optimization
At -O2 and above, GCC does not correctly compile the simulators which
use setjmp-longjmp (PDP-11, PDP-10, VAX). A working hypothesis is
that optimized state maintained in registers is being used in the
setjmp processing routine. On the PDP-11 and PDP-10, all of this
state has been either made global, or volatile, to encourage GCC to
keep the state up to date in memory. The VAX is still vulnerable.
3. Work list
3.1 SCP
- Better ENABLE/DISABLE.
3.2 PDP-11 RQDX3
Software mapped mode, RCT read simulation, VMS debug.
