These changes facilitate more robust parameter type checking and helps
to identify unexpected coding errors.
Most simulators can now also be compiled with a C++ compiler without
warnings.
Additionally, these changes have also been configured to facilitate easier
backporting of simulator and device simulation modules to run under the
simh v3.9+ SCP framework.
The original implementation coupled the elapsed time measurement
to the 100Hz internal calibration clock. This worked well enough for very
long intervals but not well at all for any intervals less than 50ms. The net
result is that it couldn't usefully be used to produce the 60Hz clock ticks
which Unix 32V used it for. It now leverages the microsecond timing
provided by sim_activate_after(). This problem is reported in #253
VAX 11/.750 Boot ROM code makes non-longword memory references to MassBus and Unibus register space. Minor changes were necessary to allow this behavior which was architecturally undefined behavior, but had real code which depended on it.
Added a BOOTDEV option to the CPU to reflect the 4 position boot device selection switch on real VAX 11/750 hardware.
The UBA750 initial state started with the UBA map registers validly mapping the first 256KB of RAM to Unibus space.
Added simulated PCS/WCS memory which boot code on some operating systems (Ultrix and other BSD derived systems) automatically loaded on the VAX 11/750. PCS/WCS was also automatically loaded by the newer versions of the BOOT ROMs.
The goals here being to simplify calling code while getting consistent output delivered everywhere it may be useful.
Modified most places which explicitly used sim_log or merely called printf to now avoid doing that and merely call sim_printf().
scp.c,scp.h - Gave priority to a command message handler to determine what values result in displayed messages and exported run_cmd_message for use by simulators which add simulator specific BOOT commands which leverage the run_cmd logic and should also leverage the run_cmd_message for message display
VAX/vax610_sysdev.c, vax730_sys.c, vax750_cmi.c, vax780_sbi.c - Added BOOT command message dispatch to run_cmd_message for simulators which perform preprocessing on BOOT activities but otherwise then dispatch to run_cmd.
This allows a single simulator executable to be a completely useful component (for those simulators which dynamically load ROM or other boot code).
Meanwhile, we continues to allow the explicit use of a user's preferred ROM or other boot code as well.
A build option is provided in the makefile to not build with the included ROM functionality if desired.
Very minor in all cases, but the strange case of swtp_cpu.c
This module used expressions of the form:
PC = ++PC & ADDRMASK;
Officially, the C language says that expressions which modify the same variable in more than one place have undefined behavior.
These were changed to the legal form which performs the desired action:
PC = (PC + 1) & ADDRMASK;
I’ve always wanted to have the option to have simulated devices behave
more naturally with respect to I/O operations. By more naturally I
mean that the current simulator model I/O is either polled (for asynchronous
things link Muxes and Network), or it is performed in the middle of some
instruction execution taking possibly many milliseconds (disk and/or tapes).
The existing model creates quite deterministic behavior which helps to debug
and understand issues, but it trades off potential instruction execution
while performing these I/O operations in between instruction execution.
To address this concept (while still retaining the potential advantages of
the original model), I’ve designed an Asynch I/O model extension for simh.
In order to flesh-out and debug this design, I’ve also refactored several
devices to utilize this capability. Please read the attached
0readmeAsynchIO.txt file for concept details about the approach.
In order to make disk devices easy to implement (within or without the
AsynchIO framework), I’ve created a sim_disk.c library which is modeled
on the sim_tape.c library to generalize disk I/O like tape I/O is
generalized in sim_tape.c. This sim_disk.c library now provides that
natural place to implement support for various disk implementation formats
(just like sim_tape support several formats, and one day will be the place
to add direct physical tape access). The current sim_disk library provides
the framework for direct support of 3 different disk formats:
1) standard simh disk format
2) platform specific physical disk access
and 3) platform independent Virtual Disk format.
The Virtual Disk format is an implementation of the format described in
the ”Microsoft Virtual Hard Disk (VHD) Image Format Specification”. The
VHD specification is available for anyone to implement under the "Microsoft
Open Specification Promise" described at
http://www.microsoft.com/interop/osp/default.mspx.
The VHD implementation includes support for:
1) Fixed sized disks
2) Dynamically expanding disks
and 3) Differencing Disks.
Dynamically expanding disks don’t change their “Virtual Size”, but they
don’t consume disk space on the containing storage until the virtual
sectors in the disk are actually written to (i.e. an RA81 or RA92 VHD
with a VMS installed on it may initially only contain 30+ MB of files,
and the resulting VHD will be 30+ MB). The VHD format contains meta data
which describes the virtual device. Amongst this meta data is the simh
device type which the VHD was originally created as. This metadata is
therefore available whenever that VHD is attached to an emulated disk
device in the future so the device type & size can be automatically be
configured.
Sim_disk_attach is used by device emulations to attach a simh/vhd/raw
device to a simulated device. The following simh command switches
are used by the sim_disk_attach API:
-R Attach Read Only.
-E Must Exist (if not specified an attempt to create the
indicated virtual disk will be attempted).
-F Open the indicated disk container in a specific format
(default is to autodetect VHD defaulting to simh if the
indicated container is not a VHD).
-X When creating a VHD, create a fixed sized VHD (vs a
Dynamically expanding one).
-C Create a VHD and copy its contents from another disk
(simh, VHD, or RAW format).
-D Create a Differencing VHD (relative to an already
existing VHD disk)
Examples:
sim> show rq
RQ, address=20001468-2000146B*, no vector, 4 units
RQ0, 159MB, not attached, write enabled, RD54, autosize, SIMH format
RQ1, 159MB, not attached, write enabled, RD54, autosize, SIMH format
RQ2, 159MB, not attached, write enabled, RD54, autosize, SIMH format
RQ3, 409KB, not attached, write enabled, RX50, autosize, SIMH format
sim> atta rq0 RA81.vhd
sim> show rq0
RQ0, 456MB, attached to RA81.vhd, write enabled, RA81, autosize, VHD format
sim> set rq2 ra92
sim> att rq2 -f vhd RA92.vhd
RQ2: creating new file
sim> sho rq2
RQ2, 1505MB, attached to RA92.vhd, write enabled, RA92, autosize, VHD format
sim> ! dir RA92.vhd
Volume in drive H is New Volume
Volume Serial Number is F8DE-510C
Directory of H:\Data
04/14/2011 12:57 PM 5,120 RA92.vhd
1 File(s) 5,120 bytes
0 Dir(s) 3,074,412,544 bytes free
sim> atta rq3 -c RA92-1.vhd RA92.vhd
sim> atta rq3 -c RA92-1.vhd RA92.vhd
RQ3: creating new virtual disk 'RA92-1.vhd'
RQ3: Copied 1505MB. 99% complete.
RQ3: Copied 1505MB. Done.
sim> sh rq3
RQ3, 1505MB, attached to RA92-1.vhd, write enabled, RA92, autosize, VHD format
sim> ! dir RA92*
Volume in drive H is New Volume
Volume Serial Number is F8DE-510C
Directory of H:\Data
04/14/2011 01:12 PM 5,120 RA92-1.vhd
04/14/2011 12:58 PM 5,120 RA92.vhd
2 File(s) 10,240 bytes
0 Dir(s) 3,074,404,352 bytes free
sim> sho rq2
RQ2, 1505MB, not attached, write enabled, RA92, autosize, VHD format
sim> set rq2 ra81
sim> set rq2 noauto
sim> sho rq2
RQ2, 456MB, not attached, write enabled, RA81, noautosize, VHD format
sim> set rq2 format=simh
sim> sho rq2
RQ2, 456MB, not attached, write enabled, RA81, noautosize, SIMH format
sim> atta rq2 -c RA81-Copy.vhd VMS055.dsk
RQ2: creating new virtual disk 'RA81-Copy.vhd'
RQ2: Copied 456MB. 99% complete.
RQ2: Copied 456MB. Done.
sim> sho rq2
RQ2, 456MB, attached to RA81-Copy.vhd, write enabled, RA81, noautosize, VHD format
sim> det rq2
sim> ! dir RA81-Copy.vhd
Volume in drive H is New Volume
Volume Serial Number is F8DE-510C
Directory of H:\Data
04/14/2011 01:22 PM 178,304,512 RA81-Copy.vhd
1 File(s) 178,304,512 bytes
0 Dir(s) 2,896,097,280 bytes free
sim> ! dir VMS055.dsk
Volume in drive H is New Volume
Volume Serial Number is F8DE-510C
Directory of H:\Data
03/08/2011 01:42 PM 403,663,872 VMS055.dsk
1 File(s) 403,663,872 bytes
0 Dir(s) 2,896,097,280 bytes free
sim>
The makefile now works for Linux and most Unix's. However, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
1.3 3.8-2
1.3.1 SCP and libraries
- Added line history capability for *nix hosts.
- Added "SHOW SHOW" and "SHOW <dev> SHOW" commands.
1.3.2 1401
- Added "no rewind" option to magtape boot.
1.3.3 PDP-11
- Added RD32 support to RQ
- Added debug support to RL
1.3.4 PDP-8
- Added FPP support (many thanks to Rick Murphy for debugging the code)
1.3.5 VAX-11/780
- Added AUTORESTART switch support, and VMS REBOOT command support
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.2 GRI
- Added support for the GRI-99 processor.
1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The save/restore format has been updated to improve its reliability.
As a result, save files prior to release 3.0 are no longer supported.
The text documentation files are obsolete and are no longer included
with the distribution. Up-to-date PDF documentation files are
available on the SimH web site.
1. New Features
1.1 3.6-0
1.1.1 Most magnetic tapes
- Added support for limiting tape capacity to a particular size in MB
1.1.2 IBM 7090/7094
- First release
1.1.3 VAX-11/780
- Added FLOAD command, loads system file from console floppy disk
1.1.4 VAX, VAX-11/780, and PDP-11
- Added card reader support (from John Dundas)
1.1.5 PDP-11
- Added instruction history
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features
1.1 3.5-0
1.1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.1.4 PDP-11
- Revised autoconfigure to handle more cases
1.2 3.5-1
No new features
1.3 3.5-2
1.3.1 All ASCII terminals
- Most ASCII terminal emulators have supported 7-bit and 8-bit
operation; where required, they have also supported an upper-
case only or KSR-emulation mode. This release adds a new mode,
7P, for 7-bit printing characters. In 7P mode, non-printing
characters in the range 0-31 (decimal), and 127 (decimal), are
automatically suppressed. This prevents printing of fill
characters under Windows.
The printable character set for ASCII code values 0-31 can be
changed with the SET CONSOLE PCHAR command. Code value 127
(DELETE) is always suppressed.
1.3.2 VAX-11/780
- First release. The VAX-11/780 has successfully run VMS V7.2. The
commercial instructions and compatability mode have not been
extensively tested. The Ethernet controller is not working yet
and is disabled.
2. Bugs Fixed
2.1 3.5-0
2.1.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.1.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.1.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.1.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.1.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.1.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.1.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.1.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
2.2 3.5-1
2.2.1 1401
- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings
2.2.2 1620
- Changed character encodings to be compatible with Pierce 709X simulator
2.2.3 PDP-10
- Changed MOVNI to eliminate GCC warning
2.2.4 VAX
- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table
2.2.5 PDP-11
- Fixed bug in autoconfiguration table
2.3 3.5-2
2.3.1 PDP-10
- RP: fixed drive clear not to clear disk address
2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)
- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)
2.3.3 PDP-8
- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)
2.3.4 VAX
- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected
