This reverts commit 5551a0dd9c.
The original idea was that the state being put into simh registers would be required to have all useful information available when remote console executed commands. These steps were taken from the code that sim_instr() executed as it was exiting. After this change was made it was realized that once a remote console command executed it might change state that directly affected instruction execution. To solve this, the logic that executes before the instructions in sim_instr() would then need to be executed whenever the event dispatch processing completed. This approach is messy, burdensome and potentially a lot of overhead for every event dispatch even though almost none of the event dispatches would be for remote console command execution. A completely different approach was suggested by J. David Bryan. That alternative approach would be to have remote console commands execute outside of the sim_instr() routine. Thus allowing the existing prelude and postlude code in sim_instr() to be performed naturally and let the remote console activities run in the same context as all other simh commands. Recent changes to scp and sim_console implement this alternative approach and thus these original changes are completely irrelevant and are thus being removed.
Improper implementation of the OVT and OTO instructions. OV is always zero or one, so the Boolean AND in the original if statement would always fail. Also, these instructions are supposed to skip if overflow is not set, the opposite of the way it was coded.
1. In sim_instr, if an Unauthorized Memory Access trap occurs, the code was enforcing the 940 Reference Manual's admonition that:
"The instruction in the trap location must be a MARK PLACE AND BRANCH (BRM) instruction."
Normally there is a BRM TRAPM in location 041, but when exploring a memory trap, the TSS monitor code at CEX (SMEM) temporarily puts a BRU CEX2+1 in location 041.
Clearly the hardware allows BRU in the trap transfer vector, because the system uses that feature. Change simulator to allow BRM or BRU in Unauthorized Memory Access Trap vector word in location 041.
2. Page 17 of the 940 reference manual specifies special actions when the target address of a BRU, BRX, BRM or BRR instruction cannot be accessed because it's not in the memory map. The simulator was not doing this, causing TRAPM to operate with the address of the BR? instruction instead of its target address. The result was to allocate a page of zeros, which then trapped when the branch completed and transferred to a HLT instruction.
By modifying the code in sds_cpu.c to provide the correct trap address, monitor code TRAPM does not allocate a page, and instead allows any user-defined trap to fire off. This fixes the problem with DDT, which relies on this trap to then map in the DDT SBREK page to 34000 and then complete the transfer to it for command processing.
1. Treat the SBRM SysPOP like the BRM opcode for calling a subroutine.
2. If the -a (atomic) switch is present with a BRM or SBRM instruction, place a breakpoint at EA+1 rather than EA, since the return link is placed at EA (BRM) or at *EA (SBRM) with subroutine execution commencing at EA+1.
Allow -f switch with Next to move forward in code.
Allow -a switch with Next for "atomic" behavior that excludes interrupts for all instructions.
Update sds_doc.doc to describe the new behavior.
Add -f switch ("force") to the Next command to set the temporary breakpoints regardless of instruction type. This is useful at
the bottom of loops or to avoid going off into unrelated code should an interrupt or memory paging trap occur.
The three CPU modes -- normal, monitor and user were represented by two binary flags (nml_mode and usr_mode). The code is simpler and easier to read if the three modes are represented by one three-valued variable, cpu_mode. In addition, record the CPU mode in the instruction history record, and add the mode to the history display.
In addition, add an optional flag to the SET CPU HISTORY=n command to *not* record instructions executed in a particular CPU mode. Flags are -n, -m and -u for normal, monitor and user mode respectively. For example, SET -m CPU HISTORY=n will only record instructions executed in normal or user mode, and will not record instructions executed in monitor mode. This change aids user-mode program debugging by not filling the history with monitor-mode service functions and interrupt activity.
Received better fix from Mark Pizzolato for the problem of having 120 clock interrupts per second instead of 60. Tested for several hours and verified that wall-clock time matches TSS monitor time.
Clock is running twice as fast as it should -- 120 interrupts per second instead of 60. Cannot find problem in initialization or calibration or count-down code, so for now, divide rtc_tps by 2 prior to invoking sim_rtcn_calb. Now 940 Executive reports wall-clock time advancing at proper rate.
Breakpoint logic now allows four execution-type breakpoints:
-E as before, break if PC equals address, unqualified by mode
-M break if PC equals address and machine is in monitor mode
-N break if PC equals address and machine is in normal (SDS 930) mode
-U break if PC equals address and machine is in user mode
The single-instruction Clock Pulse interrupt (75 octal) may be a MIN or SKR instruction. The function rtc_inst increments (MIN) or decrements (SKR) the operand and tests for zero and generates a Clock Sync interrupt (74 octal) if so. However, the SDS 940 reference manual is incorrect; in the SKR case, the test should be if the result is negative.
1. When transitioning from monitor to user mode with the trap enabled, the trap was latching the monitor address of the transferring branch rather than the user-mode address of the branch target.
2. When executing a BRU, BRX or BRM in monitor mode, if the effective address was in user mode, the code neglected to transition the machine to user mode. And after doing so, it is necessary to check for an armed monitor-to-user trap.
Also removed superfluous trailing blanks from lines in file.
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
The source set has been extensively overhauled. For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.
1. New Features in 3.4-1
1.1 All Ethernet devices
- Added Windows user-defined adapter names (from Timothe Litt)
1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors
- Added support for SET <unit>n DISCONNECT
1.3 VAX
- Added latent QDSS support
- Revised autoconfigure to handle QDSS
1.4 PDP-11
- Revised autoconfigure to handle more casees
2. Bugs Fixed in 3.4-1
2.1 SCP and libraries
- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators
2.2 1401
- Fixed bug, CPU reset was clearing SSB through SSG
2.3 PDP-11
- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)
2.4 Interdata
- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide
2.5 SDS
- Fixed bug in SHOW MUX CONN/STATS
2.6 HP
- Fixed bug in SHOW MUX CONN/STATS
2.7 PDP-8
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.8 PDP-18b
- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG
2.9 Nova, Eclipse
- Fixed potential integer overflow exception in divide
RESTRICTION: The HP DS disk is not debugged. DO NOT enable this
feature for normal operations.
WARNING: Massive changes in the PDP-11 make all previous SAVEd
file obsolete. Do not attempt to use a PDP-11 SAVE file from a
prior release with V3.3!
1. New Features in 3.3
1.1 SCP
- Added -p (powerup) qualifier to RESET
- Changed SET <unit> ONLINE/OFFLINE to SET <unit> ENABLED/DISABLED
- Moved SET DEBUG under SET CONSOLE hierarchy
- Added optional parameter value to SHOW command
- Added output file option to SHOW command
1.2 PDP-11
- Separated RH Massbus adapter from RP controller
- Added TU tape support
- Added model emulation framework
- Added model details
1.3 VAX
- Separated out CVAX-specific features from core instruction simulator
- Implemented capability for CIS, octaword, compatibility mode instructions
- Added instruction display and parse for compatibility mode
- Changed SET CPU VIRTUAL=n to SHOW CPU VIRTUAL=n
- Added =n optional parameter to SHOW CPU HISTORY
1.4 Unibus/Qbus simulators (PDP-11, VAX, PDP-10)
- Simplified DMA API's
- Modified DMA peripherals to use simplified API's
1.5 HP2100 (all changes from Dave Bryan)
CPU - moved MP into its own device; added MP option jumpers
- modified DMA to allow disabling
- modified SET CPU 2100/2116 to truncate memory > 32K
- added -F switch to SET CPU to force memory truncation
- modified WRU to be REG_HRO
- added BRK and DEL to save console settings
DR - provided protected tracks and "Writing Enabled" status bit
- added "parity error" status return on writes for 12606
- added track origin test for 12606
- added SCP test for 12606
- added "Sector Flag" status bit
- added "Read Inhibit" status bit for 12606
- added TRACKPROT modifier
LPS - added SET OFFLINE/ONLINE, POWEROFF/POWERON
- added fast/realistic timing
- added debug printouts
LPT - added SET OFFLINE/ONLINE, POWEROFF/POWERON
PTR - added paper tape loop mode, DIAG/READER modifiers to PTR
- added PV_LEFT to PTR TRLLIM register
CLK - modified CLK to permit disable
1.6 IBM 1401, IBM 1620, Interdata 16b, SDS 940, PDP-10
- Added instruction history
1.7 H316, PDP-15, PDP-8
- Added =n optional value to SHOW CPU HISTORY
2. Bugs Fixed in 3.3
2.1 SCP
- Fixed comma-separated SET options (from Dave Bryan)
- Fixed duplicate HELP displays with user-specified commands
2.2 PDP-10
- Replicated RP register state per drive
- Fixed TU to set FCE on short record
- Fixed TU to return bit<15> in drive type
- Fixed TU format specification, 1:0 are don't cares
- Fixed TU handling of TMK status
- Fixed TU handling of DONE, ATA at end of operation
- Implemented TU write check
2.3 PDP-11
- Replicated RP register state per drive
- Fixed RQ, TQ to report correct controller type and stage 1 configuration
flags on a Unibus system
- Fixed HK CS2<output_ready> flag
2.4 VAX
- Fixed parsing of indirect displacement modes in instruction input
2.5 HP2100 (all fixes from Dave Bryan)
CPU - fixed S-register behavior on 2116
- fixed LIx/MIx behavior for DMA on 2116 and 2100
- fixed LIx/MIx behavior for empty I/O card slots
DP - fixed enable/disable from either device
- fixed ANY ERROR status for 12557A interface
- fixed unattached drive status for 12557A interface
- status cmd without prior STC DC now completes (12557A)
- OTA/OTB CC on 13210A interface also does CLC CC
- fixed RAR model
- fixed seek check on 13210 if sector out of range
DQ - fixed enable/disable from either device
- shortened xtime from 5 to 3 (drive avg 156KW/second)
- fixed not ready/any error status
- fixed RAR model
DR - fixed enable/disable from either device
- fixed sector return in status word
- fixed DMA last word write, incomplete sector fill value
- fixed 12610 SFC operation
- fixed current-sector determination
IPL - fixed enable/disable from either device
LPS - fixed status returns for error conditions
- fixed handling of non-printing characters
- fixed handling of characters after column 80
- improved timing model accuracy for RTE
LPT - fixed status returns for error conditions
- fixed TOF handling so form remains on line 0
SYS - fixed display of CCA/CCB/CCE instructions
2.5 PDP-15
FPP - fixed URFST to mask low 9b of fraction
- fixed exception PC setting
RESTRICTION: The PDP-15 FPP is only partially debugged. Do NOT
enable this feature for normal operations.
WARNING: The core simulator files (scp.c, sim_*.c) have been
reorganized. Unzip V3.2-0 to an empty directory before attempting
to compile the source.
IMPORTANT: If you are compiling for UNIX, please read the notes
for Ethernet very carefully. You may need to download a new
version of the pcap library, or make changes to the makefile,
to get Ethernet support to work.
1. New Features in 3.2-0
1.1 SCP and libraries
- Added SHOW <device> RADIX command.
- Added SHOW <device> MODIFIERS command.
- Added SHOW <device> NAMES command.
- Added SET/SHOW <device> DEBUG command.
- Added sim_vm_parse_addr and sim_vm_fprint_addr optional interfaces.
- Added REG_VMAD flag.
- Split SCP into separate libraries for easier modification.
- Added more room to the device and unit flag fields.
- Changed terminal multiplexor library to support unlimited.
number of async lines.
1.2 All DECtapes
- Added STOP_EOR flag to enable end-of-reel error stop
- Added device debug support.
1.3 Nova and Eclipse
- Added QTY and ALM multiplexors (Bruce Ray).
1.4 LGP-30
- Added LGP-30/LGP-21 simulator.
1.5 PDP-11
- Added format, address increment inhibit, transfer overrun
detection to RK.
- Added device debug support to HK, RP, TM, TQ, TS.
- Added DEUNA/DELUA (XU) support (Dave Hittner).
- Add DZ per-line logging.
1.6 18b PDP's
- Added support for 1-4 (PDP-9)/1-16 (PDP-15) additional
terminals.
1.7 PDP-10
- Added DEUNA/DELUA (XU) support (Dave Hittner).
1.8 VAX
- Added extended memory to 512MB (Mark Pizzolato).
- Added RXV21 support.
2. Bugs Fixed in 3.2-0
2.1 SCP
- Fixed double logging of SHOW BREAK (found by Mark Pizzolato).
- Fixed implementation of REG_VMIO.
2.2 Nova and Eclipse
- Fixed device enable/disable support (found by Bruce Ray).
2.3 PDP-1
- Fixed bug in LOAD (found by Mark Crispin).
2.4 PDP-10
- Fixed bug in floating point unpack.
- Fixed bug in FIXR (found by Phil Stone, fixed by Chris Smith).
2.6 PDP-11
- Fixed bug in RQ interrupt control (found by Tom Evans).
2.6 PDP-18B
- Fixed bug in PDP-15 XVM g_mode implementation.
- Fixed bug in PDP-15 indexed address calculation.
- Fixed bug in PDP-15 autoindexed address calculation.
- Fixed bugs in FPP-15 instruction decode.
- Fixed clock response to CAF.
- Fixed bug in hardware read-in mode bootstrap.
- Fixed PDP-15 XVM instruction decoding errors.
2.7 VAX
- Fixed PC read fault in EXTxV.
- Fixed PC write fault in INSV.
Because some key files have changed, V3.0 should be unzipped to a
clean directory.
1. New Features in 3.0-0
1.1 SCP and Libraries
- Added ASSIGN/DEASSIGN (logical name) commands.
- Changed RESTORE to unconditionally detach files.
- Added E11 and TPC format support to magtape library.
- Fixed bug in SHOW CONNECTIONS.
- Added USE_ADDR64 support
1.2 All magtapes
- Magtapes support SIMH format, E11 format, and TPC format (read only).
- SET <tape_unit> FORMAT=format sets the specified tape unit's format.
- SHOW <tape_unit> FORMAT displays the specified tape unit's format.
- Tape format can also be set as part of the ATTACH command, using
the -F switch.
1.3 VAX
- VAX can be compiled without USE_INT64.
- If compiled with USE_INT64 and USE_ADDR64, RQ and TQ controllers support
files > 2GB.
- VAX ROM has speed control (SET ROM DELAY/NODELAY).
2. Bugs Fixed in 3.01-0
2.1 VAX
- Fixed CVTfi bug: integer overflow not set if exponent out of range
- Fixed EMODx bugs:
o First and second operands reversed
o Separated fraction received wrong exponent
o Overflow calculation on separated integer incorrect
o Fraction not set to zero if exponent out of range
- Fixed interval timer and ROM access to pass power-up self-test even on very
fast host processors (fixes from Mark Pizzolato).
2.2 1401
- Fixed mnemonic, instruction lengths, and reverse scan length check bug for MCS.
- Fixed MCE bug, BS off by 1 if zero suppress.
- Fixed chaining bug, D lost if return to SCP.
- Fixed H branch, branch occurs after continue.
- Added check for invalid 8 character MCW, LCA.
- Fixed magtape load-mode end of record response.
2.3 Nova
- Fixed DSK variable size interaction with restore.
2.4 PDP-1
- Fixed DT variable size interaction with restore.
2.5 PDP-11
- Fixed DT variable size interaction with restore.
- Fixed bug in MMR1 update (found by Tim Stark).
- Added XQ features and fixed bugs:
o Corrected XQ interrupts on IE state transition (code by Tom Evans).
o Added XQ interrupt clear on soft reset.
o Removed XQ interrupt when setting XL or RL (multiple people).
o Added SET/SHOW XQ STATS.
o Added SHOW XQ FILTERS.
o Added ability to split received packet into multiple buffers.
o Added explicit runt and giant packet processing.
2.6 PDP-18B
- Fixed DT, RF variable size interaction with restore.
- Fixed MT bug in MTTR.
2.7 PDP-8
- Fixed DT, DF, RF, RX variable size interaction with restore.
- Fixed MT bug in SKTR.
2.8 HP2100
- Fixed bug in DP (13210A controller only), DQ read status.
- Fixed bug in DP, DQ seek complete.
2.9 GRI
- Fixed bug in SC queue pointer management.
3. New Features in 3.0 vs prior releases
N/A
4. Bugs Fixed in 3.0 vs prior releases
N/A
5. General Notes
WARNING: The RESTORE command has changed. RESTORE will now
detach an attached file on a unit, if that unit did not have
an attached file in the saved configuration. This is required
to assure that the unit flags and the file state are consistent.
WARNING: The compilation scheme for the PDP-10, PDP-11, and VAX
has changed. Use one of the supplied build files, or read the
documentation carefully, before compiling any of these simulators.
1. New Features in 2.10-4
1.1 SCP and Libraries
- Added .ini startup file capability (suggested by Hans Pufal).
- Added multiple switch evaluation points (suggested by Hans Pufal).
- Added multiple command per action.
- Added new library, sim_tape.c, for magtape emulation.
1.2 PDP-11
- Added user-defined disk capacity to RQ.
- Addec choice of controllers to TQ.
- Added user-defined tape capacity to TQ.
1.3 Interdata
- Added SHOW SELCH n command to display selector channel state.
1.4 Line Frequency Clocks (H316, Interdata, Nova, PDP-8, PDP-11,
PDP-18B, SDS)
- Added SET <device> {50HZ/60HZ}, to set the line frequency.
1.5 DEC Console Input (PDP-8, PDP-11, PDP-18B, VAX)
- Added SET TTI CTRL-C, to generate ^C from SIMH prompt (^C
crashes simulators compiled with Windows Visual C++).
1.6 Magtapes
- Revised to use magtape library for consistency.
2. Bugs Fixed in 2.10-4
- SCP: fixed bug in multiword deposits to files
- Interdata disks: fixed bug in cylinder overflow on writes
- Interdata tape: fixed bug, read error did not stop selector
channel
- Interdata precision clock: improved autocalibrate algorithm
for UNIX V7.
- Nova fixed head disk: fixed autosize algorithm.
- PDP-11 RQ and TQ: fixed bugs in queue process and in vector
calculation for VAXen.
- PDP-11 TQ: fixed overly strict implementation of illegal
modifiers check.
- PDP-11 RY: fixed autosize algorithm.
- PDP-18B CPU: fixed three EAE bugs (found by Hans Pufal).
- PDP-18B MT: fixed bugs in interrupt handling, BOT error handling.
- PDP-18B RF: removed extra bit from disk address, fixed autosize
algorithm.
- PDP-18B SYS: fixed bug in FMTASC usage (found by Hans Pufal).
- PDP-8 MT: fixed bug in BOT error handling.
- PDP-8 DF, RF, RX: fixed autosize algorithm.
3. New Features in 2.10 vs prior releases
3.1 SCP and Libraries
- The VT emulation package has been replaced by the capability
to remote the console to a Telnet session. Telnet clients
typically have more complete and robust VT100 emulation.
- Simulated devices may now have statically allocated buffers,
in addition to dynamically allocated buffers or disk-based
data stores.
- The DO command now takes substitutable arguments (max 9).
In command files, %n represents substitutable argument n.
- The initial command line is now interpreted as the command
name and substitutable arguments for a DO command. This is
backward compatible to prior versions.
- The initial command line parses switches. -Q is interpreted
as quiet mode; informational messages are suppressed.
- The HELP command now takes an optional argument. HELP <cmd>
types help on the specified command.
- Hooks have been added for implementing GUI-based consoles,
as well as simulator-specific command extensions. A few
internal data structures and definitions have changed.
- Two new routines (tmxr_open_master, tmxr_close_master) have
been added to sim_tmxr.c. The calling sequence for
sim_accept_conn has been changed in sim_sock.c.
- The calling sequence for the VM boot routine has been modified
to add an additional parameter.
- SAVE now saves, and GET now restores, controller and unit flags.
- Library sim_ether.c has been added for Ethernet support.
- The EVAL command will evaluate a symbolic type-in and display
it in numeric form.
- The ! command (with no arguments) will launch the host operating
system command shell. The ! command (with an argument) executes
the argument as a host operating system command. (Code from
Mark Pizzolato)
- Telnet sessions now recognize BREAK. How a BREAK is transmitted
dependent on the particular Telnet client. (Code from Mark
Pizzolato)
- The sockets library includes code for active connections as
well as listening connections.
- The RESTORE command will restore saved memory size, if the
simulator supports dynamic memory resizing.
- Added dynamic extension of the breakpoint table.
- Added breakpoint actions.
- Added VMS support for ! (from Mark Pizzolato).
3.2 VAX
- Non-volatile RAM (NVR) can behave either like a memory or like
a disk-based peripheral. If unattached, it behaves like memory
and is saved and restored by SAVE and RESTORE, respectively.
If attached, its contents are loaded from disk by ATTACH and
written back to disk at DETACH and EXIT.
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape) has been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from vax_stddev.c and
now references a common implementation file, dec_pt.h.
- Examine and deposit switches now work on all devices, not just
the CPU.
- Device address conflicts are not detected until simulation starts.
- If the VAX console is attached to a Telnet session, BREAK is
interpreted as console halt.
- The SET/SHOW HISTORY commands enable and display a history of
the most recently executed instructions. (Code from Mark
Pizzolato)
3.3 PDP-11
- SHOW <device> VECTOR displays the device's interrupt vector.
Most devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape), RK611/RK06/RK07 (cartridge disk),
RX211 (double density floppy), and KW11P programmable clock
have been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from pdp11_stddev.c and
now references a common implementation file, dec_pt.h.
- Device bootstraps now use the actual CSR specified by the
SET ADDRESS command, rather than just the default CSR. Note
that PDP-11 operating systems may NOT support booting with
non-standard addresses.
- Specifying more than 256KB of memory, or changing the bus
configuration, causes all peripherals that are not compatible
with the current bus configuration to be disabled.
- Device address conflicts are not detected until simulation starts.
- The PDP-11 implements a stub DEUNA/DELUA (XU). The real XU
module will be included in a later release.
3.4 PDP-10
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The RX211 (double density floppy) has been added; it is off
by default.
- The paper tape now references a common implementation file,
dec_pt.h.
- Device address conflicts are not detected until simulation starts.
- The PDP-10 implements a stub DEUNA/DELUA (XU). The real XU
module will be included in a later release.
3.5 PDP-1
- DECtape (then known as MicroTape) support has been added.
- The line printer and DECtape can be disabled and enabled.
- The PDP-1 supports the Type 24 serial drum (based on recently
discovered documents).
3.6 18b PDP's
- The PDP-4 supports the Type 24 serial drum (based on recently
discovered documents).
- Added RB09 fixed head disk for the PDP-9.
- Added LP09 line printer for the PDP-9 and PDP-15.
- Added variable size support and autosizing to the RF15/RF09.
3.7 PDP-8
- The RX28 (double density floppy) has been added as an option to
the existing RX8E controller.
- SHOW <device> DEVNO displays the device's device number. Most
devices allow the device number to be changed with SET <device>
DEVNO=nnn.
- Device number conflicts are not detected until simulation starts.
- Added variable size support and autosizing to the DF32 and RF08.
3.8 Nova
- Added variable size support and autosizing to the Novadisk.
3.9 AltairZ80
- A hard drive has been added for increased storage.
- Several bugs have been fixed.
3.10 HP 2100
- The 12845A has been added and made the default line printer (LPT).
The 12653A has been renamed LPS and is off by default. It also
supports the diagnostic functions needed to run the DCPC and DMS
diagnostics.
- The 12557A/13210A disk defaults to the 13210A (7900/7901).
- The 12559A magtape is off by default.
- New CPU options (EAU/NOEAU) enable/disable the extended arithmetic
instructions for the 2116. These instructions are standard on
the 2100 and 21MX.
- New CPU options (MPR/NOMPR) enable/disable memory protect for the
2100 and 21MX.
- New CPU options (DMS/NODMS) enable/disable the dynamic mapping
instructions for the 21MX.
- The 12539 timebase generator autocalibrates.
- The IOP microinstruction set is supported for the 21MX as well
as the 2100.
- The HP2100 supports the Access Interprocessor Link (IPL).
3.11 Simulated Magtapes
- Simulated magtapes recognize end of file and the marker
0xFFFFFFFF as end of medium. Only the TMSCP tape simulator
can generate an end of medium marker.
- The error handling in simulated magtapes was overhauled to be
consistent through all simulators.
3.12 Simulated DECtapes
- Added support for RT11 image file format (256 x 16b) to DECtapes.
3.13 Terminals Multiplexors
- BREAK detection was added to the HP, DEC, and Interdata terminal
multiplexors.
4. Bugs Fixed in 2.10 vs prior releases
- TS11/TSV05 was not simulating the XS0_MOT bit, causing failures
under VMS. In addition, two of the CTL options were coded
interchanged.
- IBM 1401 tape was not setting a word mark under group mark for
load mode reads. This caused the diagnostics to crash.
- SCP bugs in ssh_break and set_logon were fixed (found by Dave
Hittner).
- Numerous bugs in the HP 2100 extended arithmetic, floating point,
21MX, DMS, and IOP instructions were fixed. Bugs were also fixed
in the memory protect and DMS functions. The moving head disks
(DP, DQ) were revised to simulate the hardware more accurately.
Missing functions in DQ (address skip, read address) were added.
- PDP-10 tape wouldn't boot, and then wouldn't read (reported by
Michael Thompson and Harris Newman, respectively)
- PDP-1 typewriter is half duplex, with only one shift state for
both input and output (found by Derek Peschel)
- PDP-11 console must default to 7b for early UNIX compatibility.
- PDP-11/VAX TMSCP emulator was using the wrong packet length for
read/write end packets.
- Telnet IAC+IAC processing was fixed, both for input and output
(found by Mark Pizzolato).
- PDP-11/VAX Ethernet setting flag bits wrong for chained
descriptors (found by Mark Pizzolato).
- 18b PDP RF15/RF09: fixed IOT decoding and address wraparound
logic (found by Hans Pufal).
- 18b PDP RP15: fixed IOT decoding and command initiation.
- HP2100 IPL: changed to full duplex (found by Mike Gemeny).
- HP2100 CPU: fixed last cycle bug in DMA outpout (found by Mike
Gemeny).
- Interdata 16b CPU: fixed bug in SETM, SETMR (found by Mark
Pizzolato).
5. General Notes
WARNING: The build procedures have changed. There is only one UNIX
makefile. To compile without Ethernet support, simply type
gmake {target|all}
To compile with Ethernet support, type
gmake USE_NETWORK=1 {target|all}
The Mingw batch files require Mingw release 2 and invoke the Unix
makefile. There are still separate batch files for compilation
with or without Ethernet support.
WARNING: V2.10 has reorganized and renamed some of the definition
files for the PDP-10, PDP-11, and VAX. Be sure to delete all
previous source files before you unpack the Zip archive, or
unpack it into a new directory structure.
WARNING: V2.10 has a new, more comprehensive save file format.
Restoring save files from previous releases will cause 'invalid
register' errors and loss of CPU option flags, device enable/
disable flags, unit online/offline flags, and unit writelock
flags.
WARNING: If you are using Visual Studio .NET through the IDE,
be sure to turn off the /Wp64 flag in the project settings, or
dozens of spurious errors will be generated.
WARNING: Compiling Ethernet support under Windows requires
extra steps; see the Ethernet readme file. Ethernet support is
currently available only for Windows, Linux, NetBSD, and OpenBSD.
1. New Features in 2.10-2
The build procedures have changed. There is only one UNIX makefile.
To compile without Ethernet support, simply type
gmake {target|all}
To compile with Ethernet support, type
gmake USE_NETWORK=1 {target|all}
The Mingw batch files require Mingw release 2 and invoke the Unix
makefile. There are still separate batch files for compilation
with or without Ethernet support.
1.1 SCP and Libraries
- The EVAL command will evaluate a symbolic type-in and display
it in numeric form.
- The ! command (with no arguments) will launch the host operating
system command shell. The ! command (with an argument) executes
the argument as a host operating system command. (Code from
Mark Pizzolato)
- Telnet sessions now recognize BREAK. How a BREAK is transmitted
dependent on the particular Telnet client. (Code from Mark
Pizzolato)
- The sockets library includes code for active connections as
well as listening connections.
- The RESTORE command will restore saved memory size, if the
simulator supports dynamic memory resizing.
1.2 PDP-1
- The PDP-1 supports the Type 24 serial drum (based on recently
discovered documents).
1.3 18b PDP's
- The PDP-4 supports the Type 24 serial drum (based on recently
discovered documents).
1.4 PDP-11
- The PDP-11 implements a stub DEUNA/DELUA (XU). The real XU
module will be included in a later release.
1.5 PDP-10
- The PDP-10 implements a stub DEUNA/DELUA (XU). The real XU
module will be included in a later release.
1.6 HP 2100
- The IOP microinstruction set is supported for the 21MX as well
as the 2100.
- The HP2100 supports the Access Interprocessor Link (IPL).
1.7 VAX
- If the VAX console is attached to a Telnet session, BREAK is
interpreted as console halt.
- The SET/SHOW HISTORY commands enable and display a history of
the most recently executed instructions. (Code from Mark
Pizzolato)
1.8 Terminals Multiplexors
- BREAK detection was added to the HP, DEC, and Interdata terminal
multiplexors.
1.9 Interdata 16b and 32b
- First release. UNIX is not yet working.
1.10 SDS 940
- First release.
2. Bugs Fixed in 2.10-2
- PDP-11 console must default to 7b for early UNIX compatibility.
- PDP-11/VAX TMSCP emulator was using the wrong packet length for
read/write end packets.
- Telnet IAC+IAC processing was fixed, both for input and output
(found by Mark Pizzolato).
- PDP-11/VAX Ethernet setting flag bits wrong for chained
descriptors (found by Mark Pizzolato).
3. New Features in 2.10 vs prior releases
3.1 SCP and Libraries
- The VT emulation package has been replaced by the capability
to remote the console to a Telnet session. Telnet clients
typically have more complete and robust VT100 emulation.
- Simulated devices may now have statically allocated buffers,
in addition to dynamically allocated buffers or disk-based
data stores.
- The DO command now takes substitutable arguments (max 9).
In command files, %n represents substitutable argument n.
- The initial command line is now interpreted as the command
name and substitutable arguments for a DO command. This is
backward compatible to prior versions.
- The initial command line parses switches. -Q is interpreted
as quiet mode; informational messages are suppressed.
- The HELP command now takes an optional argument. HELP <cmd>
types help on the specified command.
- Hooks have been added for implementing GUI-based consoles,
as well as simulator-specific command extensions. A few
internal data structures and definitions have changed.
- Two new routines (tmxr_open_master, tmxr_close_master) have
been added to sim_tmxr.c. The calling sequence for
sim_accept_conn has been changed in sim_sock.c.
- The calling sequence for the VM boot routine has been modified
to add an additional parameter.
- SAVE now saves, and GET now restores, controller and unit flags.
- Library sim_ether.c has been added for Ethernet support.
3.2 VAX
- Non-volatile RAM (NVR) can behave either like a memory or like
a disk-based peripheral. If unattached, it behaves like memory
and is saved and restored by SAVE and RESTORE, respectively.
If attached, its contents are loaded from disk by ATTACH and
written back to disk at DETACH and EXIT.
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape) has been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from vax_stddev.c and
now references a common implementation file, dec_pt.h.
- Examine and deposit switches now work on all devices, not just
the CPU.
- Device address conflicts are not detected until simulation starts.
3.3 PDP-11
- SHOW <device> VECTOR displays the device's interrupt vector.
Most devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The TK50 (TMSCP tape), RK611/RK06/RK07 (cartridge disk),
RX211 (double density floppy), and KW11P programmable clock
have been added.
- The DEQNA/DELQA (Qbus Ethernet controllers) have been added.
- Autoconfiguration support has been added.
- The paper tape reader has been removed from pdp11_stddev.c and
now references a common implementation file, dec_pt.h.
- Device bootstraps now use the actual CSR specified by the
SET ADDRESS command, rather than just the default CSR. Note
that PDP-11 operating systems may NOT support booting with
non-standard addresses.
- Specifying more than 256KB of memory, or changing the bus
configuration, causes all peripherals that are not compatible
with the current bus configuration to be disabled.
- Device address conflicts are not detected until simulation starts.
3.4 PDP-10
- SHOW <device> VECTOR displays the device's interrupt vector.
A few devices allow the vector to be changed with SET
<device> VECTOR=nnn.
- SHOW CPU IOSPACE displays the I/O space address map.
- The RX211 (double density floppy) has been added; it is off
by default.
- The paper tape now references a common implementation file,
dec_pt.h.
- Device address conflicts are not detected until simulation starts.
3.5 PDP-1
- DECtape (then known as MicroTape) support has been added.
- The line printer and DECtape can be disabled and enabled.
3.6 PDP-8
- The RX28 (double density floppy) has been added as an option to
the existing RX8E controller.
- SHOW <device> DEVNO displays the device's device number. Most
devices allow the device number to be changed with SET <device>
DEVNO=nnn.
- Device number conflicts are not detected until simulation starts.
3.7 IBM 1620
- The IBM 1620 simulator has been released.
3.8 AltairZ80
- A hard drive has been added for increased storage.
- Several bugs have been fixed.
3.9 HP 2100
- The 12845A has been added and made the default line printer (LPT).
The 12653A has been renamed LPS and is off by default. It also
supports the diagnostic functions needed to run the DCPC and DMS
diagnostics.
- The 12557A/13210A disk defaults to the 13210A (7900/7901).
- The 12559A magtape is off by default.
- New CPU options (EAU/NOEAU) enable/disable the extended arithmetic
instructions for the 2116. These instructions are standard on
the 2100 and 21MX.
- New CPU options (MPR/NOMPR) enable/disable memory protect for the
2100 and 21MX.
- New CPU options (DMS/NODMS) enable/disable the dynamic mapping
instructions for the 21MX.
- The 12539 timebase generator autocalibrates.
3.10 Simulated Magtapes
- Simulated magtapes recognize end of file and the marker
0xFFFFFFFF as end of medium. Only the TMSCP tape simulator
can generate an end of medium marker.
- The error handling in simulated magtapes was overhauled to be
consistent through all simulators.
3.11 Simulated DECtapes
- Added support for RT11 image file format (256 x 16b) to DECtapes.
4. Bugs Fixed in 2.10 vs prior releases
- TS11/TSV05 was not simulating the XS0_MOT bit, causing failures
under VMS. In addition, two of the CTL options were coded
interchanged.
- IBM 1401 tape was not setting a word mark under group mark for
load mode reads. This caused the diagnostics to crash.
- SCP bugs in ssh_break and set_logon were fixed (found by Dave
Hittner).
- Numerous bugs in the HP 2100 extended arithmetic, floating point,
21MX, DMS, and IOP instructions were fixed. Bugs were also fixed
in the memory protect and DMS functions. The moving head disks
(DP, DQ) were revised to simulate the hardware more accurately.
Missing functions in DQ (address skip, read address) were added.
- PDP-10 tape wouldn't boot, and then wouldn't read (reported by
Michael Thompson and Harris Newman, respectively)
- PDP-1 typewriter is half duplex, with only one shift state for
both input and output (found by Derek Peschel)
5. General Notes
WARNING: V2.10 has reorganized and renamed some of the definition
files for the PDP-10, PDP-11, and VAX. Be sure to delete all
previous source files before you unpack the Zip archive, or
unpack it into a new directory structure.
WARNING: V2.10 has a new, more comprehensive save file format.
Restoring save files from previous releases will cause 'invalid
register' errors and loss of CPU option flags, device enable/
disable flags, unit online/offline flags, and unit writelock
flags.
WARNING: If you are using Visual Studio .NET through the IDE,
be sure to turn off the /Wp64 flag in the project settings, or
dozens of spurious errors will be generated.
WARNING: Compiling Ethernet support under Windows requires
extra steps; see the Ethernet readme file. Ethernet support is
currently available only for Windows, Linux, NetBSD, and OpenBSD.
